Sodium Silicate/Urea/Melamine Ternary Synergistic Waterborne Acrylic Acid Flame-Retardant Coating and Its Flame-Retardant Mechanism.

Waterborne acrylic coatings, the largest market share of predominant environmentally friendly coatings, face limitations in their extensive application due to their flammability. The flame-retardant properties of the coatings could be significantly enhanced by incorporate inorganic flame retardants. However, inorganic flame retardants tend to aggregate and unevenly disperse in waterborne acrylic coatings, causing a substantial decrease in flame retardancy. In this work, sodium silicate was utilized as a flame retardant, with urea and melamine serving as modifiers and synergistic agents. This combination resulted in the preparation of a sodium silicate/urea/melamine ternary synergistic waterborne acrylic flame-retardant coating. This coating was applied to the surface of poplar veneer to create flame-retardant poplar veneer. Subsequently, various instruments, including a scanning electron microscope (SEM), a limiting oxygen index meter (LOI), a thermogravimetric analyzer (TG), and a cone calorimeter (CONE), were employed to investigate the relevant properties and mechanisms of both the flame-retardant coating and poplar veneer. The results demonstrated that the sodium silicate/urea/melamine ternary synergistic flame retardant did not exhibit aggregation and could be uniformly dispersed in waterborne acrylic coatings. The physical and mechanical properties of the ternary synergistic flame-retardant poplar veneer coating were satisfactory. Melamine and urea, acting as modifiers, not only greatly enhanced the dispersibility of sodium silicate in waterborne acrylic coatings, but also assisted in the formation of a silicon-containing char layer through the generation of nitrogen, achieving ternary synergistic flame retardancy. In conclusion, this work explores a novel method to efficiently and uniformly disperse inorganic flame retardants in organic coatings. It significantly improves the dispersibility and uniformity of inorganic flame retardants in organic polymers, thereby substantially enhancing the flame-retardant performance of coatings. This work provides a theoretical basis for the research and application of new flame-retardant coatings in the field of chemistry and materials.

Interaction between lignin and cellulose during the pyrolysis process.

The hierarchical and heterogeneous structures and the interactions between biomass components within cell walls are closely related to the pyrolysis characteristics. In this work, thermogravimetric analysis (TGA) and pyrolysis kinetics analysis were used to investigate the pyrolysis characteristics of windmill palm (Trachycarpus fortunei (Hook.) H. Wendl.) culm and silk after delignification. The results demonstrate cellulose pyrolysis temperature of silk is much higher than that of culm, attributed to the higher lignin content of the former. After delignification, the cellulose pyrolysis temperature of silk decreased by 48 °C, which is much higher than that of culm by 18 °C, suggesting a strong interaction between lignin and cellulose during the pyrolysis process. Futhermore, pyrolysis kinetics analysis also found that the frequency factor of slik and culm increased by 129 % and 26 %, respectively, attributed to the disappearance of the carbon layer formed by lignin pyrolysis process. And, differ in lignin content is responsible for the discrepancy of frequency factor increase. In conclusion, we propose a mechanism model for lignin hindering cellulose pyrolysis, which is of great significance for understanding the pyrolysis interactions of biomass components in complex supramolecular cell wall.

Antimildew Effect of Three Phenolic Compounds and the Efficacy of Antimildew Sliced Bamboo Veneer.

The development of the bamboo industry has been hindered by environmental issues caused by the application of bamboo preservatives. Chinese herbal phenolic compounds have been shown to possess broad-spectrum, potent antimildew properties, making them promising candidates for the development of new bamboo mildew inhibitors. In this study, we investigated the antimildew properties of three phenolic compounds, eugenol, carvacrol, and paeonol, against common mildews in bamboo materials using the Oxford cup method and the double-dilution method. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to analyze the antimildew mechanism and its effects on mildew cell morphology. Our results showed that carvacrol exhibited the strongest antimildew activity, with minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values of 1.56 mg/mL and 1.76 mg/mL, respectively, followed by eugenol and paeonol. At a concentration of 25 mg/mL, eugenol and carvacrol had an inhibitory rate of over 50% against various mildews. Different concentrations of the three compounds significantly disrupted the morphology and structural integrity of mildew hyphae, with the extent of damage increasing with concentration and treatment duration. In the sliced bamboo mildew prevention experiment, carvacrol at a concentration of 29.25 mg/mL was found to be highly effective against all tested mildews. Our study provides new insights and a theoretical basis for the development of eco-friendly bamboo mildew inhibitors based on plant phenolic compounds.

Preeminent Flame-Retardant and Smoke Suppression Properties of PCaAl-LDHs Nanostructures on Bamboo Scrimber.

Bamboo scrimber is widely used in interior decoration, architecture, and many other fields. However, it has caused huge security risks due to its inherent flammability and easy-to-produce toxic volatiles after combustion. In this work, the bamboo scrimber with superior flame retardant and smoke suppression properties was produced via the coupling of phosphocalcium-aluminum hydrotalcite (PCaAl-LDHs) with bamboo bundles. The results demonstrated that the flame-retardant bamboo scrimber (FRBS) heat release rate (HRR) and total heat release (THR) were, respectively, reduced by 34.46% and 15.86% compared with that of untreated bamboo scrimber. At the same time, the unique multi-layer structure of PCaAl-LDHs effectively slowed down the release rate of flue gas by extending its escape path. Cone calorimetry showed that the total smoke emissions (TSR) and specific extinction area (SEA) of FRBS were, respectively, reduced by 65.97% and 85.96% when the concentration of the flame retardant was 2%, which greatly developed the fire safety of the bamboo scrimber. This method not only improves the fire safety of bamboo scrimber but can also be expected to broaden its use scenarios.

Preparation of PO43--Intercalated Calcium-Aluminum Hydrotalcites via Coprecipitation Method and Its Flame-Retardant Effect on Bamboo Scrimber.

To improve the flame retardancy of bamboo scrimber, flame-retardant CaAl-PO4-LDHs were synthesized via the coprecipitation method using PO43- as the anion of an intercalated calcium-aluminum hydrotalcite in this work. The fine CaAl-PO4-LDHs were characterized via X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), cold field scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and thermogravimetry (TG). Different concentrations (1% and 2%) of CaAl-PO4-LDHs were used as flame retardants for the bamboo scrimber, and the flame retardancy of the bamboo scrimber was characterized via cone calorimetry. The results showed that CaAl-PO4-LDHs with excellent structures were successfully synthesized via the coprecipitation method in 6 h and at 120 °C. Compared with the bamboo scrimber without the flame retardant treatment, the peak heat release rate (HRR) of the bamboo scrimber treated with 1% and 2% concentrations of flame-retardant CaAl-PO4-LDHs decreased by 16.62% and 34.46%, the time taken to reach the exothermic peak was delayed by 103 s and 204 s and the Time to Ignition (TTI) was increased by 30% and 40%, respectively. Furthermore, the residual carbon of the bamboo scrimber did not change significantly, increasing by 0.8% and 2.08%, respectively. CO production decreased by 18.87% and 26.42%, respectively, and CO2 production decreased by 11.11% and 14.46%, respectively. The combined results show that the CaAl-PO4-LDHs synthesized in this work significantly improved the flame retardancy of bamboo scrimber. This work exhibited the great potential of the CaAl-PO4-LDHs, which were successfully synthesized via the coprecipitation method and applied as a flame retardant to improve the fire safety of bamboo scrimber.

Screening of Ionic Liquids against Bamboo Mildew and Its Inhibition Mechanism.

Ionic liquids are a class of organic molten salts that consist entirely of cations and anions. They are characterized by their low vapor pressure, low viscosity, low toxicity, high thermal stability, and strong antifungal potential. In this study, the inhibitory performance of ionic liquid cations against Penicillium citrinum, Trichoderma viride, and Aspergillus niger was investigated, along with the mechanism of cell membrane disruption. The Oxford cup method, SEM, and TEM were employed to examine the extent of damage and the specific site of action of ionic liquids on the mycelium and cell structure of these fungi. The results showed that 1-decyl-3-methylimidazole had a strong inhibitory effect on TV; benzyldimethyldodecylammonium chloride had a weak inhibitory effect on PC, TV, AN, and a mixed culture; while dodecylpyridinium chloride exhibited significant inhibitory effects on PC, TV, AN, and Mix, with more prominent effects observed on AN and Mix, exhibiting MIC values of 5.37 mg/mL, 5.05 mg/mL, 5.10 mg/mL, and 5.23 mg/mL, respectively. The mycelium of the mildews showed drying, partial loss, distortion, and uneven thickness. The cell structure showed separation of the plasma wall. The absorbance of the extracellular fluid of PC and TV reached the maximum after 30 min, while that of AN reached the maximum after 60 min. The pH of the extracellular fluid decreased initially and then increased within 60 min, followed by a continuous decrease. These findings provide important insights for the application of ionic liquid antifungal agents in bamboo, medicine, and food.

Process and Anti-Mildew Properties of Tea Polyphenol-Modified Citral-Treated Bamboo.

In order to reduce the oxidative degradation of citral, our research group modified citral with the natural antioxidant from tea polyphenols and applied it to bamboo processing to enhance the anti-mold effect of bamboo, but its application to the bamboo treatment process and the anti-mold effect is still not clear. For this reason, in this paper, the tea polyphenol-modified citral anti-mildew treatment of bamboo as well as the anti-mildew properties of bamboo were explored using the orthogonal testing method and a UV-vis spectrophotometer. The results showed that when the concentration of tea polyphenol-modified citral reached 175 mg mL-1 and above, the efficacy of the anti-mildew treated bamboo against common molds reached 100%; the improved anti-mildew treatment process parameters for bamboo were as follows: impregnation pressure 0.6 MPa, impregnation time 150 min, and tea polyphenol-modified citral concentration 200 mg mL-1. Following the tea polyphenol-modified citral anti-mildew treatment of bamboo, not only did it improve the anti-mildew properties of the bamboo materials, but it also added a fresh lemon fragrance without altering the original colour, microstructure, and chemical properties of the bamboo materials.

Antioxidant-Mediated Modification of Citral and Its Control Effect on Mildewy Bamboo.

To reduce the oxidative degradation of citral and improve its antimildew performance, citral was modified with natural antioxidants such as tea polyphenols, ascorbic acid, and theaflavin in the present study. Additionally, the effects of these natural antioxidants on the citral degradation rate and DPPH radical-scavenging rate, as well as the effectiveness of antioxidant-modified citral in the antimildew treatment of bamboo were investigated. Ascorbic acid, theaflavin, and tea polyphenols improved the antioxidant performance of citral to some extent, and the tea polyphenols exhibited the best antioxidant performance. When the amount of tea polyphenols added to citral reached 1.0%, the oxidative degradation of citral was effectively prevented. Compared with citral, tea-polyphenol-modified citral could reduce the efficacy of the bamboo antimildew treatment against all four mildews and the effectiveness of the antimildew treatment reached 100%. Citral modification with antioxidants reduced the amount of citral required in the treatment, thereby reducing the treatment cost for bamboo mildew.

Preparation of Citral Compound and Its Bamboo Antimildew Properties.

To reduce the amount of citral used without reducing the antimildew performance of bamboo, the citral compound preparation process, the distribution of the compound in bamboo, and its antimildew performance were investigated using the Oxford cup method, Fourier-transform infrared spectroscopy, and ultraviolet spectrophotometry. The results revealed that the combination of citral with cinnamaldehyde or thymol may lead to partial chemical reactions, which may change the chemical structure of citral and affect its bacteriostatic properties. The bacteriostatic properties of the citraldehyde thymol compound against common molds of bamboo were considerably superior to those of the citral cinnamaldehyde compound. The limonaldehyde thymol compound showed a low distribution trend outside and vice versa inside in the treated bamboo. The citral thymol compound exhibited good antimildew performance at a concentration of 200 mg/mL. The citral thymol compound could reduce the amount of citral by approximately 67 mg/mL without reducing the antimildew performance of bamboo.

Preparation and Flame Retardant Properties of Calcium-Aluminium Hydrotalcite with Root Cutting Silicate Layers as Bamboo Flame Retardants.

Bamboo has been widely used in architecture, decoration and other fields because of its advantages of short growth period, high strength and degradability. However, bamboo, as a combustible material like wood, are easy to burn and cause building fires. However, the existing bamboo water-based flame retardants have some shortcomings, such as strong hygroscopicity and easy loss, which limits the application of bamboo products. In order to improve the flame retardant performance of bamboo, CaAl-SiO2 layered double hydroxide (LDH) as bamboo flame retardant was synthesised by coprecipitation method. The influence of preparation technology on CaAl-SiO3-LDH structures and properties as well as the flame retardant and smoke suppression characteristics of flame retardant-treated bamboo was discussed. The results revealed that the crystallisation temperature, crystallisation time and crystallisation concentration of CaAl-SiO3-LDHs considerably affected its structure and properties. The optimum technological parameters for preparing CaAl-SiO3-LDHs by using the coprecipitation method are as follows: crystallisation temperature of 100 °C, crystallisation time of 9 h and Ca2+ solution molar concentration of 0.33 mol/L. Compared with nonflame-retardant wood, CaAl-SiO3-LDH flame retardant treatment delayed the peak time of the heat release rate by 20 s and the ignition time by 77.78% and increased the carbon residue rate by 9.54%. This study can provide reference for the research of new flame retardant for bamboo products.

Investigation of the Release Mechanism and Mould Resistance of Citral-Loaded Bamboo Strips.

In the present study, the sustained-release system loading citral was synthesised by using PNIPAm nanohydrogel as a carrier and analysed its drug-release kinetics and mechanism. Four release models, namely zero-order, first-order, Higuchi, and Peppas, were employed to fit the experimental data, and the underlying action mechanism was analysed. The optimised system was applied to treat a bamboo mould, followed by assessment of the mould-proof performance. Our experimental results revealed that the release kinetics equation of the system conformed to the first order; the higher the external temperature, the better the match was. In the release process, PNIPAm demonstrated a good protection and sustained-release effect on citral. Under the pressure of 0.5 MPa, immersion time of 120 min, and the system concentration ratio of 1, the optimal drug-loading parameters were obtained using the slow-release system with the best release parameters. Compared to the other conditions, bamboos treated with pressure impregnation demonstrated a better control effect on bamboo mould, while the control effect on Penicillium citrinum, Trichoderma viride, Aspergillus niger, and mixed mould was 100% after 28 days. Moreover, the structure and colour of bamboo remained unchanged during the entire process of mould control.

Inhibition mechanism and antibacterial activity of natural antibacterial agent citral on bamboo mould and its anti-mildew effect on bamboo.

Bamboo, a natural material, has been widely used in the fields of decoration, architecture and furniture. However, bamboo is easy to mildew and lose its use value. In this paper, the inhibition mechanism and antibacterial activity of a natural antibacterial agent citral on bamboo mould and its anti-mildew effect on bamboo were studied. The results showed that citral could change the shape of mycelium, destroy the integrity of mycelium structure, cell wall and cell membrane structure, thereby causing leakage of nucleic acids, proteins and other substances in the cell, as well as destroy the pH balance of the inside and outside of the cell, to inhibit or kill mould. When the concentration of citral is 100 mg ml-1, the antibacterial rates of citral against Penicillium citrinum (PC), Trichoderma viride (TV), Aspergillus niger (AN) and a hybrid fungi group comprising PC, TV and AN (Hun) were more than 100%. However, compared with the direct effect of citral on mould, the antibacterial property of bamboo treated with citral was significantly reduced, the mildew proof effect can be achieved only if the concentration of citral to treat bamboo is increased to more than twice the concentration of citral directly acting on mould.

Fabrication of core-shell type poly(NIPAm)-encapsulated citral and its application on bamboo as an anti-molding coating.

Bamboo is a widely used renewable and degradable biomass material; however, its sustainable utilisation is hindered by its susceptibility to mold. The current bamboo anti-mold technology is mainly based on organic chemical agents; these agents can easily induce mold resistance in bamboo with long-term use, and can even adversely affect human health. In the present study, the poly(N-isopropyl acrylamide) (PNIPAm)/citral nanohydrogel was prepared by encapsulating the natural antibiotic citral in PNIPAm for the anti-mold treatment of bamboo. The results revealed that this nanohydrogel exhibited a core-shell system with citral as the 'core' and PNIPAm as the 'shell', an average hydrodynamic diameter of 88.1 nm, and a low critical solution temperature (LCST) of 35.4 °C. After the high-pressure impregnation with the nanohydrogel, the bamboo strips showed excellent control effects toward common bamboo molds. Therefore, the nanohydrogel demonstrated high efficiency and it may become an ideal alternative to organic chemical anti-mold agents, thus showcasing its significant potential in the field of mold prevention for bamboo.

Preparation and Anti-Mold Properties of Nano-ZnO/Poly(N-isopropylacrylamide) Composite Hydrogels.

The aim of this study was to overcome drawbacks of the inhomogeneous dispersion and facile agglomeration of nano-ZnO/poly(N-isopropylacrylamide) composite hydrogels (nano-ZnO/PNIPAm composite hydrogels) during synthesis and improve the anti-mold property of the nano-ZnO/PNIPAm composite hydrogels. Here, nano-ZnO/PNIPAm composite hydrogels were prepared by the radical polymerization method. Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), differential scanning calorimeter (DSC), and dynamic light scattering (DLS) were used to characterize the effects of different dispersants on the particle sizes, dispersions, and phase transition characteristics of the nano-ZnO/PNIPAm composite hydrogels. The anti-mold properties of nano-ZnO/PNIPAm composite hydrogels were studied. Results revealed that the nano-ZnO/PNIPAm composite hydrogel prepared by the addition of nano-ZnO dispersion liquid exhibited the smallest particle size, the most homogeneous dispersion, and the highest stability. The addition of the dispersant did not change the phase transition characteristics of nano-ZnO/PNIPAm, and the nano-ZnO/PNIPAm composite hydrogels (Pf) exhibited good anti-mold properties to the bamboo mold.

Charge-functionalized and mechanically durable composite cryogels from Q-NFC and CS for highly selective removal of anionic dyes.

A composite cryogel was prepared from quaternized nanofibrillated cellulose (Q-NFC) and chitosan (CS) through a combination of freeze-drying and cross-linking with epichlorohydrin. The specific surface area of the composite cryogel was approximately two times that of Q-NFC cryogel. And the composite cryogel exhibited superior adsorption properties of anionic dyes than either the Q-NFC or CS cryogel controls. The adsorption isotherm well fitted the Langmuir model with the maximum theoretical adsorption capacity up to 473.9mg/g. The adsorption behavior was found to follow pseudo second-order kinetic model, indicating the chemisorption nature. Notably, the composite cryogel could effectively separate the cationic dye from anionic one. Furthermore, the composite cryogel displayed excellent reusability, evidenced by the removal percentage of Acid red 88 still as high as 96% even after five adsorption-desorption cycles. These advantages would make it an environmentally friendly candidate for the use in the separation and efficient removal of anionic dyes.

Thermo-responsive and compression properties of TEMPO-oxidized cellulose nanofiber-modified PNIPAm hydrogels.

In this study, TEMPO-oxidized bamboo cellulose nanofibers (TO-CNF) with anionic carboxylate groups on the surfaces were in-situ incorporated into poly(N-isopropylacrylamide) (PNIPAm) matrix to improve its thermo-responsive and mechanical properties during the polymerization. The microstructure, swelling behaviors, and compressive strength of resultant PNIPAm composite hydrogels with varying contents of TO-CNFs (0-10wt%) were then examined, respectively. Modified hydrogels exhibited the similar light transparency to pure PNIPAm one due to the formation of semi-IPN structure between PNIPAm and TO-CNF. FT-IR spectra demonstrated that the presence of TO-CNF did not alter the position of characteristic peaks associated with PNIPAm. SEM observation suggested that the pore size of PNIPAm hydrogels was markedly increased after the incorporation of TO-CNF. Also, the composite hydrogels showed superior swelling behavior and much improved compression properties with respect to pure PNIPAm one. Thus, TO-CNF appeared to be a "green" nanofiller that can simultaneously improve swelling and mechanical properties of PNIPAm hydrogel.