Importance of the Posterior Plate in Three-Column Tibial Plateau Fractures: A Finite Element Analysis and Clinical Validation.

OBJECTIVE: Dual-plate fixation was thought to be the gold standard for treating complicated bicondylar tibial plateau fractures, yet it was found to be hard to accommodate the posterior column in three-column fractures. Currently, column-specific fixation is becoming more and more recognized, but no comprehensive investigation has been performed to back it up. Therefore, the objective of this study was to validate the importance of posterior column fixation in the three-column tibial fractures by a finite element (FE) analysis and clinical study. METHODS: In FE analysis, three models were developed: the longitudinal triple-plate group (LTPG), the oblique triple-plate group (OTPG), and the dual-plate group (DPG). Three loading scenarios were simulated. The distribution of the displacement and the equivalent von Mises stress (VMS) in each structure was calculated. The comparative measurements including the maximum posterior column collapse (MPCC), the maximum total displacement of the model (MTD), the maximum VMS of cortical posterior column (MPC-VMS), and the maximum VMS located on each group of plates and screws (MPS-VMS). The clinical study evaluated the indicators between the groups with or without the posterior plate, including operation time, blood loss volume, full-weight bearing period, Hospital for Special Surgery Knee Scoring system (HSS), Rasmussen score, and common postoperative complications. RESULTS: In the FE analysis, the MPCC, the MPC-VMS, and the MTD were detected in much lower amounts in LTPG and OTPG than in DPG. In comparison with DPG, the LTPG and OTPG had larger MPS-VMS. In the clinical study, 35 cases were included. In the triple-plate (14) and dual-plate (21) groups, the operation took 115.6 min and 100.5 min (p < 0.05), respectively. Blood loss in both groups was 287.0 mL and 206.6 mL (p < 0.05), and the full-weight bearing period was 14.5 weeks and 16.2 weeks (p < 0.05). At the final follow-up, the HSS score was 85.0 in the triple-plate group and 77.5 in the dual-plate (p < 0.05), the Rasmussen score was 24.1 and 21.6 (p < 0.05), there were two cases with reduction loss (9.5%) in the dual-plate group and one case of superficial incision infection found in the triple-plate group. CONCLUSION: The posterior implant was beneficial in optimizing the biomechanical stability and functional outcomes in the three-column tibial plateau fractures.

Morphological characteristics and a new classification system of the inferior pole fracture of the patella: A computer-tomography-based study.

PURPOSE: The objective of this study was to measure the morphological characteristics of inferior pole fracture of the patella (IPFP) and develop a practical classification system to determine the corresponding treatment protocols for different IPFPs with specific patterns. METHODS: A retrospective radiographic review was performed on a series of 71 patients with IPFP. The preoperative CT data were collected and measured using image processing software. The number of fragments, maximum fracture fragment anteroposterior length (MFFAL), maximum fracture fragment transverse length (MFFTL), fracture fragment coronal angle (FFCA), fracture fragment sagittal angle (FFSA), maximum fracture fragment height (MFFH) and maximum transverse sectional area (MTSA) were analysed. RESULTS: The mean number of fracture fragments was 3.8. The average MFFAL was 14.9 mm, the average MFFTL was 23.5 mm, the average FFCA was 92.1°, the average FFSA was 93.0°, the average MFFH was 13.6 mm, and the average MTSA was 299.3 mm2. A new classification system was introduced to describe the varied patterns of IPFP, summarized as (I) simple IPFP; (II) comminuted IPFP; (III) simple IPFP with simple patellar body fracture; and (IV) comminuted patellar fracture involving the inferior pole. With the four-type classification system, 12 type I, 22 type II, 21 type III, and 16 type IV lesions were observed, each with specific morphological characteristics. CONCLUSION: Most IPFPs exhibited a diversiform pattern, demonstrating that coverage fixation was likely needed. The four-type classification system might offer a valuable approach to help orthopaedic surgeons make individual treatment plans.

The remnant axial cortical length of the proximal femur in pertrochanteric fractures: a three-dimensional computed tomography study and its clinical implications.

BACKGROUND: Cortical buttress are important factors for postoperative stable reconstruction of per/inter-trochanteric fractures. The study aimed to measure the remnant axial cortical length (RACL) of the proximal circumference of the femur, and to determine which part of the RACL can be used reliably to postoperatively sustain the head-neck fragment as a cortical support pattern. METHODS: Eighty patients with trochanteric hip fractures admitted from January 2015 to January 2016 were included in a retrospective study. Their pre-operative computed tomography (CT) images were used to form 3D-CT reconstructions via Mimics software. After simulated rotation and movement for fracture reduction, the RACL, its three component parts-namely, the remnant anterior cortex (RAC), remnant lateral cortex (RLC), and remnant posterior cortex (RPC) -the γ angle between the anterior and posterior cortex, and the Hsu's lateral wall thickness (LWT) were evaluated. RESULTS: Patients with an A1 fracture (21/80) had a longer RACL (88.8 ± 15.8 mm) than those with an A2 fracture (60.0 ± 11.9 mm; P < 0.01). The RAC, RLC, and RPC of the RACL in A1 fractures were also significantly longer than those in A2 fractures (P < 0.001). However, the most significant difference among the three components of the RACL was in the RPC, which was 27.3 ± 7.8 mm in A1 fractures and 9.2 ± 6.6 mm in A2 fractures. In addition, the coefficient of variation of the RAC was only 20.0%, while that of the RPC was 75.5%. The average γ angle in A1 fractures was 16.2 ± 13.1°, which was significantly smaller than that in A2 fractures, which was 40.3 ± 14.5° (P < 0.001). There was a significant statistical difference in the LWT between A1 and A2 fractures (P < 0.001). There were significant differences in the RACL, RAC, RLC, RPC, γ angle, and LWT among the five subtypes (P < 0.001). CONCLUSIONS: The RAC is relatively stable in pertrochanteric fractures. Fracture reduction through a RAC buttress may help to enhance the postoperative stable reconstruction of per/inter-trochanteric fractures and make possible good mechanical support for fracture healing.

Positive medial cortical support versus anatomical reduction for trochanteric hip fractures: Finite element analysis and biomechanical testing.

BACKGROUND AND OBJECTIVES: The anatomical reduction (AR) is usually considered the best option for fractures. Nevertheless, in unstable trochanteric hip fractures (UTHF), previous clinical reports found that the positive medial cortical support (PMCS, an over-reduction technique) attained higher mechanical stability, but this challenging clinical finding still needs experimental validation. METHODS: This study constructed in-silico and biomechanical PMCS and AR models, with the use of the most clinically-representative geometry design of fracture models, the multi-directional design in FE analysis, and the subject-specific (osteoporotic) bone material properties, to make the models better mimic the actual condition in clinical settings. Then multiple performance variables (von-Mises stress, strain, integral axial stiffness, displacement, structural changes, etc.) were assessed to uncover details of integral and regional stability. RESULTS: Among in-silico comparison, PMCS models showed significantly lower maximum displacement than AR models, and the maximum von Mises stress of implants (MVMS-I) was significantly lower in PMCS models than in AR models (highest MVMS-I in -30°-A3-AR of 1055.80 ± 93.37 MPa). Besides, PMCS models had significantly lower maximum von Mises stress along fracture surfaces (MVMS-F) (highest MVMS-F in 30°-A2-AR of 416.40 ± 38.01 MPa). Among biomechanical testing comparison, PMCS models showed significantly lower axial displacement. Significantly lower change of neck-shaft angle (CNSA) was observed in A2-PMCS models. A fair amount of AR models converted into the obvious negative medial cortical support (NMCS) condition, whereas all PMCS models kept the PMCS condition. The results were also validated through comparison to previous clinical data. CONCLUSIONS: The PMCS is superior to the AR in the UTHF surgery. The current study opens up the second thought of the role of over-reduction technique in bone surgery.

A new posterosuperior screw placement strategy to avoid in-out-in screws in femoral neck fractures.

Objective: The inverted triangle configuration of the three cannulated screws is the classic fixation method most commonly performed for undisplaced femoral neck fractures in young and geriatric patients. However, the posterosuperior screw has a high incidence of cortical breach, known as an in-out-in (IOI) screw. In this study, we present a novel posterosuperior screw placement strategy to prevent the screw from becoming IOI. Methods: Using computed tomography data and image-processing software, 91 undisplaced femoral neck fractures were reconstructed. The anteroposterior (AP), lateral, and axial radiographs were simulated. To simulate the intraoperative screw placement process, participants used three screw insertion angles (0°, 10°, and 20°) to place the screw on the AP and lateral views of the radiograph according to the three established strategies. On the AP radiograph, a screw was placed abutting (strategy 1), 3.25 mm away from (strategy 2), or 6.5 mm away from (strategy 3) the superior border of the femoral neck. On the lateral radiograph, all the screws were placed abutting the posterior border of the femoral neck. Axial radiographs were used to evaluate the screw position. Results: In strategy 1, all the placed screws were IOI regardless of the screw insertion angle. In strategy 2, 48.3% (44/91) of IOI screws occurred at a 0° screw insertion angle, 41.7% (38/91) of IOI screws occurred at a 10° screw insertion angle, and 42.9% (39/91) of IOI screws occurred at a 20° screw insertion angle situation. In strategy 3, no IOI screw occurred, and the screw insertion angles did not affect the safety and accuracy of screw placement. Conclusions: Screws placed according to strategy 3 are safe. The reliability of this screw placement strategy is unaffected by a screw insertion angle of less than 20 degrees.

Residual lateral wall width predicts a high risk of mechanical complications in cephalomedullary nail fixation of intertrochanteric fractures: a retrospective cohort study with propensity score matching.

PURPOSE: The purpose of this study is to determine whether the integrity of the entry portal of head-neck implant is related to postoperative mechanical complications. METHODS: We retrospectively reviewed consecutive patients with pertrochanteric fractures in our hospital treated from January 1, 2018, to September 1, 2021. Based on the integrity of the entry portal for head-neck implants on the femoral lateral wall, patients were divided into two groups, including the ruptured entry portal (REP) group and the intact entry portal (IEP) group. After 4:1 propensity score-matched analyses were used to balance the baseline of the two groups, a total of 55 patients were extracted from the original participants, including 11 patients in the REP group and 44 matched patients in the IEP group. The anterior to posterior cortex width on the mid-level of the lesser trochanter was measured and defined as the residual lateral wall width (RLWW). RESULTS: Compared with the IEP group, the REP group was correlated with postoperative mechanical complications (OR = 12.00, 95% CI 1.837-78.369, P = 0.002) and hip-thigh pain (OR = 26.67, 95% CI 4.98-142.86). RLWW ≤ 18.55 mm indicated a high likelihood (tau-y = 0.583, P = 0.000) of becoming the REP type postoperatively and being more likely to suffer from mechanical complications (OR = 30.67, 95% CI 3.91-240.70, P = 0.000) and hip-thigh pain (OR = 14.64, 95% CI 2.36-90.85, P = 0.001). CONCLUSION: Rupture of entry portal is a high-risk factor for mechanical complications in intertrochanteric fractures. RLWW ≤ 18.55 mm is a reliable predictor of the postoperative REP type.

Separate vertical wiring plus bilateral anchor girdle suturing fixation for the fractures of the inferior pole of the patella.

BACKGROUND: The fixation of inferior pole fractures of the patella (IPFPs) is still a great challenge for surgeons. MATERIALS AND METHODS: We introduced a new fixation method for IPFP fixation, that is, separate vertical wiring plus bilateral anchor girdle suturing fixation (SVW-BSAG). Three finite element models including the anterior tension band wiring (ATBW) model, separate vertical wiring (SVW) model and SVW-BSAG model, were built to evaluate the fixation strength of different fixation methods. A total of 41 consecutive patients with IPFP injury were enrolled in this retrospective study, including 23 patients in the ATBW group and 18 patients in the SVW-BSAG group. The operation time, radiation exposure, full weight-bearing time, Bostman score, extension lag versus contralateral healthy leg, Insall-Salvati ratio, and radiograph outcomes were employed to assess and compare the ATBW group and SVW-BSAG group. RESULTS: The finite element analysis confirmed that the SVW-BSAG fixation method was as reliable as the ATBW fixation method in terms of fixed strength. Through retrospective analysis, we found that there was no significant difference between the SVW-BSAG and ATBW groups in age, sex, BMI, fracture side, fracture type, or follow-up time. There were no significant differences between the two groups in the Insall-Salvati ratio, 6-month Bostman score, and fixation failure. Compared with the ATBW group, the SVW-BSAG group showed advantages in intraoperative radiation exposure, full weight-bearing time, and extension lag versus the contralateral healthy leg. CONCLUSION: The finite element analysis and clinical results showed that SVW-BSAG fixation methods are a reliable and valuable for IPFP treatment.

Insufficient proximal medullary filling of cephalomedullary nails in intertrochanteric femur fractures predicts excessive postoperative sliding: a case-control study.

OBJECTIVE: Excessive postoperative sliding is a common complication of intramedullary nails in the treatment of intertrochanteric femur fractures. The aim of this study was to identify risk factors for excessive postoperative sliding in the intertrochanteric fractures treated with an intramedullary nail. METHODS: A retrospective analysis of 369 patients with femoral intertrochanteric fractures treated with short intramedullary nails between February 2017 and September 2020 was performed. Patients were classified into an excessive sliding group (ES group) and a control group according to the sliding distance after 6 months of follow-up. The proximal medullary filling degree (MFD), fracture reduction patterns in the anteroposterior (AP) view and lateral view, and tip-apex distance (TAD) were evaluated and compared in each group. RESULTS: Thirty-three cases were included in the ES group, and 336 cases were included in the control group. No significant differences in age, sex, fracture side, AO Foundation and Orthopaedic Trauma Association (AO/OTA) classification, Dorr classification, Singh Osteoporosis Index (SOI), American Society of Anesthesiologists classification (ASA), TAD or fracture reduction patterns in the AP view were noted between the two groups. The negative reduction pattern can strongly predict excessive postoperative sliding (OR 4.286, 95% CI 1.637-11.216, P = 0.003). The incidence of excessive postoperative sliding increased by 8.713-fold when the MFD decreased by 10% (OR 8.713, 95% CI 1.925-39.437, P = 0.005). CONCLUSIONS: A low medullary filling degree and negative fracture reduction pattern in the lateral view were both independent risk factors for excessive postoperative sliding.

Tension-band wiring through a single cannulated screw combined with suture anchors to treat inferior pole fracture of the patella.

PURPOSE: To evaluate the feasibility and clinical outcomes of tension-band wiring through a single cannulated screw combined with two suture anchors in treating inferior pole fracture of the patella. METHODS: Between September 2018 and September 2021, a total of 22 patients with a mean age of 55 years who sustained inferior pole fracture of the patella and were treated by tension-band wiring through a single cannulated screw combined with two suture anchors were enrolled. X-ray radiographs were performed to observe the bone union time. The duration of each operation was recorded to reflect the complexity of surgical treatment. Functional measurements, comprising range of motion (ROM), the Böstman scale, and the Knee Injury and Osteoarthritis Outcome Score (KOOS), were taken. Postoperative complications including fixation failure, incision infection, loss of reduction, and malunion were evaluated. RESULTS: All patients were followed up for an average of 17 months (range: 12-25 months). The average clinical bone union time was 8 weeks (range: 6-12 weeks), and the radiographic bone union time was 11 weeks (range: 8-12 weeks). At the final follow-up, the mean ROM was 136° (range: 115°-140°), the KOOS was 85 (range: 68-100) and the Böstman score was 28 (range: 20-30); these outcomes were classified as excellent in 17 cases and good in 5 cases, with no instances of poor results. Loss of reduction occurred in one case, while no cases of incision infection, fixation failure or malunion were observed. CONCLUSION: For inferior pole fracture of the patella, tension-band wiring through a single cannulated screw combined with suture anchors can offer sufficient fixation stability to achieve a satisfactory clinical outcome with reduced operational complexity; this procedure should be recommended in clinical practice.

Two-Part Intertrochanteric Femur Fractures with Bisection of the Lesser Trochanter: An Irreducible Fracture Pattern.

Objective: To introduce the clinical features of and surgical techniques for a rare type of irreducible pertrochanteric femur fracture pattern with bisection of the lesser trochanter. Methods: From January 2017 to December 2019, 357 patients with per/intertrochanteric femur fractures underwent surgery by closed reduction and internal fixation, of whom 12 patients were identified with rare preoperative imaging features, the lesser trochanter was almost equally bisected. The main fracture pathoanatomy of these cases included: The anterior fracture line passed along the intertrochanteric line to the medial lesser trochanter and bisected it into 2 equal parts from mid-level of the lesser trochanteric protrusion. The proximal part of the lesser trochanter connected to the head-neck fragment and attached by the psoas major tendon, while the distal part of the lesser trochanter connected to the femoral shaft and attached by the tendon of the iliac muscle. These fractures were irreducible by a closed maneuver and were reduced with limited assistance by some devices, and short intramedullary nails were used for fixation of these fractures. Results: All patients were followed up for an average of 14.2 ± 2.1 months. Clinical fracture union occurred at an average of 10.8 ± 1.5 weeks, while radiographic union occurred at an average of 12.7 ± 1.2 weeks. No cut out of the helical blade was visible on radiographs. The average Parker-Palmer score was 6.9 ± 1.3 (range, 5-9) at the last follow up, including 8 cases rated as excellent, 2 as good and 2 as fair. Conclusion: Two-part pertrochanteric femur fractures with bisection of the lesser trochanter have an irreducible fracture pattern with cortical locking and soft tissue incarceration. Soft tissue release and short cephalomedullary nail fixation for this fracture pattern provide stable fixation and allow early exercise. This treatment appears to have excellent outcomes in the short and medium terms.

Calcar fracture gapping: a reliable predictor of anteromedial cortical support failure after cephalomedullary nailing for pertrochanteric femur fractures.

BACKGROUND: Maintaining anteromedial cortical support is essential for controlling sliding and decreasing postoperative implant-related complications. However, adequate fracture reduction with cortical support in immediate postoperative fluoroscopy is not invariable in postoperative follow-ups. This study was conducted to investigate the risk factors leading to anteromedial cortical support failure in follow up for pertrochanteric femur fractures treated with cephalomedullary nails. METHODS: This retrospective study enrolled 159 patients with pertrochanteric fractures (AO/OTA- 31A1 and 31A2) that fixed with cephalomedullary nails. All patients were evaluated as adequate fracture reduction in immediate postoperative fluoroscopy before leaving the operation theater. The patients were separated into two groups based on the condition of the anteromedial cortex in the postoperative 3D CT with full-range observation: those with calcar support maintained in Group 1 and those with calcar support lost in Group 2. Demographic information, fracture classification, TAD (tip-apex distance), Cal-TAD, Parker ratio, NSA (neck-shaft angle), reduction quality score, and calcar fracture gapping were collected and compared. Logistic regression analysis was conducted to explore the risk factors leading to anteromedial cortex change. RESULTS: Anteromedial cortical support failure was noted in 46 cases (29%). There was no significant difference between the two groups concerning age, sex, side injury, TAD, Cal-TAD, Parker ratio, or NSA. There was a significant difference in the AO/OTA fracture classification in univariate analysis but no difference in the multivariable analysis. The reduction quality score, calcar fracture gapping in the AP (anteroposterior), and lateral views were significantly associated with anteromedial cortical support failure in follow-up after cephalomedullary nailing in the multivariable analysis. The threshold value of calcar fracture gapping for the risk of loss was 4.2 mm in the AP and 3.8 mm in the lateral fluoroscopies. Mechanical complications (lateral sliding and varus) were frequently observed in the negative anteromedial cortical support group. CONCLUSIONS: Good reduction quality was a protective factor, and larger calcar fracture gapping in the AP and lateral views were risk factors leading to the postoperative loss of anteromedial cortical support. Therefore, we should pay close attention to fracture reduction and minimize the calcar fracture gap during surgery.

Low filling ratio of the distal nail segment to the medullary canal is a risk factor for loss of anteromedial cortical support: a case control study.

BACKGROUND: Anteromedial cortical support apposition (positive and/or neutral cortical relations) is crucial for surgical stability reconstruction in the treatment of trochanteric femur fractures. However, the loss of fracture reduction is frequent in follow-ups after cephalomedullary nail fixation. This paper aimed to investigate the possible predictive risk factors for postoperative loss of anteromedial cortex buttress after nail fixation. METHODS: A retrospective analysis of 122 patients with AO/OTA 31A1 and A2 trochanteric femur fractures treated with cephalomedullary nails between January 2017 and December 2019 was performed. The patients were classified into two groups according to the postoperative status of the anteromedial cortical apposition in 3D CT images: Group 1 with contact "yes" (positive or anatomic) and Group 2 with contact "No" (negative, loss of contact). The fracture reduction quality score, tip-apex distance (TAD), calcar-referenced TAD (Cal-TAD), Parker ratio, neck-shaft angle (NSA), and the filling ratio of the distal nail segment to medullary canal diameter in anteroposterior (AP) and lateral fluoroscopies (taken immediately after the operation) were examined in univariate and multivariate analyses. Mechanical complications were measured and compared in follow-up radiographs. RESULTS: According to the postoperative 3D CT, 84 individuals (69%) were categorized into Group 1, and 38 individuals (31%) were classified as Group 2. The multivariate logistic regression analysis showed that the poor fracture reduction quality score (P < 0.001) and decreasing filling ratio in the lateral view (P < 0.001) were significant risk factors for the loss of anteromedial cortical contact. The threshold value for the distal nail filling ratio in lateral fluoroscopy predicting fracture reduction re-displacement was found to be 53%, with 89.3% sensitivity and 78.9% specificity. The mechanical complication (varus and over lateral sliding) rate was higher in Group 2. CONCLUSIONS: The fracture reduction quality score and the decreasing filling ratio of the distal nail to the medullary canal in the lateral view (a novel parameter causing pendulum-like movement of the nail) were possible risk factors for postoperative loss of anteromedial cortical support.

Sub-Classification of AO/OTA-2018 Pertrochanteric Fractures Is Associated With Clinical Outcomes After Fixation of Intramedullary Nails.

BACKGROUND: The new edited AO/OTA-2018 classification of pertrochanteric fractures was revised and no longer based on the status of lesser trochanter. This paper aimed to explore the clinical and technical outcomes among the subgroups (31A1 and 31A2) of the new classification treated with cephalomedullary nails. METHODS: A retrospective research of 154 patients diagnosed with pertrochanteric fractures (AO/OTA-2018 31A1.2/3 and 31A2.1/2/3) treated with intramedullary nails was conducted. The baseline data and outcomes were compared among the subgroups. The outcomes included tip-apex distance (TAD), Cal-TAD, Parker ratio, neck shaft angle (NSA), blood loss, varus displacement, and over lateral sliding rate of the blade. RESULTS: There were 154 cases involving 48 males and 106 females. The average age was higher in the sub-classifications of A2.2 and A2.3 than A1.2. Furthermore, the subgroups of A2.2 and A2.3 presented inferior outcomes with regard to blood loss and reduction quality score than A1.2 and A1.3. The subgroup of A2.3 was further poor with respect to calcar fracture gapping in the anteroposterior view and excessive lateral migration occurrence rate than A1.2. CONCLUSIONS: Complex pertrochanteric fractures indicated inferior outcomes compared to simple sub-classifications, which might lead by the incompetent of lateral wall and instability of the fracture. The newly proposed AO/OTA-2018 classification was conductive to forecast the prognosis.

The Pre-Loaded Set-Screw in InterTAN Nail: Should It Be Tightened or Not Tightened in Pertrochanteric Hip Fractures.

BACKGROUND: InterTAN is a specific type of cephalomedullary nail with a twin interlocking de-rotation and compression screw, which has inherent ability of anti-rotation. Whether to tighten or not to tighten the preloaded setscrew to allow or not allow secondary sliding in InterTan nail is controversial in clinical practice. METHODS: We retrospectively collected 4 nonunion cases of unstable pertrochanteric femur fractures (AO/OTA-31A2), all were treated with InterTan nail and the preloaded setscrew was tightened in order to prevent further secondary sliding and femoral neck shortening. RESULTS: After 6 months to 2 years follow-up, the fractures showed nonunion in radiography and the patients complained slight to middle degrees of pain, and had to use walking stick assistant in activities of daily life. Tightening the pre-loaded setscrew to prevent postoperative secondary sliding as static constructs might keep the femoral neck length, but lose the opportunity of telescoping for fracture impaction, and take the risk of healing complications, such as fracture nonunion, femoral head cutout or nail breakage. CONCLUSIONS: As the harm outweighs benefit, we advocate the preloaded setscrew in InterTan nail should not be tightened in standard-obliquity pertrochanteric hip fractures (AO/OTA-31A1 and A2).

A new fluoroscopic view for evaluation of anteromedial cortex reduction quality during cephalomedullary nailing for intertrochanteric femur fractures: the 30° oblique tangential projection.

BACKGROUND: Anteromedial cortex-to-cortex reduction is a key parameter for stable reconstruction of the fracture fragments during the intertrochanteric fracture fixation. This paper introduces the oblique fluoroscopic projection as a novel method to evaluate the quality of anteromedial cortical apposition. METHODS: Three proximal femur specimens were marked with steel wires along five anatomic landmarks: Greater trochanter, Lesser trochanter, Intertrochanteric line, Anterolateral tubercle and the Anteromedial cortical line. After obtaining the standard femoral neck AP and lateral fluoroscopic images, the C-arm was rotated by every 5°increments until a clear tangential view of the antero-medial-inferior corner cortex was observed. 98 cases of intertrochanteric hip fractures were enrolled from April 2018 to October 2019. After fixation with the nails, the intra-operative anteromedial cortex reduction quality was evaluated from the AP, the true lateral, and the new anteromedial oblique fluoroscopic images. The fluoroscopic results were compared with the post-operative 3D-CT reconstruction images. RESULTS: The specimen study showed that internal rotation of the C-arm to approximately 30 ° can remove all the obscure shadows and clearly display the antero-medial-inferior cortical tangent line. Clinically,the positive, neutral and negative apposition of different cortices via intra-operative fluoroscopic images showed79, 19 and 0 cases of medial cortical apposition in AP views; 2, 68 and 28 cases of anterior cortices in lateral views;and 22, 51 and 25cases of anteromedial cortical apposition in oblique views respectively. The post-operative 3D-CT reconstruction images revealed that the final anteromedial cortical contact was noted in 62 cases (63.3%), and lost in 36 cases (36.7%). The overall coincidence rate between intra-operative fluoroscopy and post-operative 3D-CT was 63.3% (62/98) in AP view,79.6% (78/98) in lateral view, and 86.7% (85/98) in oblique view(p < 0.001). Negative cortical apposition in oblique view was highly predictive of a final loss of cortical support on 3D CT (24/25 cases, 96%).And non-negative cortical apposition in oblique view was highly associated with true cortical support on 3D CT images (61/73 cases, 83.6%) (p < 0.001). CONCLUSIONS: Besides the AP and lateral projections, an anteromedial oblique view of 30° certifies to be a very useful means for evaluation of the fracture reduction quality of anteromedial cortical apposition.

An alternative method to tighten the helical blade with impaired locking mechanism during operation of cephalomedullary nailing.

During the operation of proximal femoral nail antirotation (PFNA), surgeons may run across a rare problem that the helical blade fails to be tightened and locked by clockwise turning of the impactor handle. At this moment, three options can be taken: first, replace the unlocked helical blade and re-insert another new one; second, keep the unlocked helical blade in place, proceed and finish the operation as usual; and third, as we described, keep the first helical blade in situ and tighten and lock it by other instruments, such as the SW4.0 mm hexagonal screwdriver for the distal interlocking screw, which is already in the instrument box. The third option is the best, as it keeps the operation going and remains the fixation quality as usual.

Intertrochanteric Femur Fracture Treatment in Asia: What We Know and What the World Can Learn.

Hip fractures are of great interest worldwide as the geriatric population continues to increase rapidly. Currently, surgeons prefer to use cephalomedullary nail for internal fixation of pertrochanteric/intertrochanteric fractures. This article summarizes 10 concepts in hip fracture treatment over the past 20 years, including fracture line mapping, proximal lateral wall and anterior cortex, posteromedial lesser trochanter-calcar fragment, anteromedial cortex support reduction, changes of fracture reduction after sliding and secondary stability, nail entry point and wedge-open deformity, tip-apex distance and calcar-referenced tip-apex distance, femoral anterior bowing and nail modification, long nails for wide medullary canal and large posterior coronal fragment, and postoperative stability score.

Distally Based Sural Adipofascial Turnover Flap for Coverage of Complicated Wound in the Foot and Ankle Region.

BACKGROUNDS: Distally based perforator propeller flap from the lower leg region is a versatile local reconstructive technique for the foot and ankle defects. However, flap venous congestion remains a tough nut to crack. We hypothesize that raising an adipofascial flap with turnover mode of transposition can improve venous drainage and enhance flap safety. METHODS: Based on the 2 rows of septocutaneous perforators in the posterior distal third of the lower leg, distally based adipofascial flap was raised from medial sural region nourished by 1 perforator bundle from the posterior tibial artery or from the lateral sural region from the peroneal artery. The superficial dissection was performed in subdermal plane and deep in to the subfascial space. The flap was nourished by perforator-plus-adipofascial pedicle and turned over 180 degrees upside down to reach the distal wounds. One week later, a split-skin graft was used to cover the exposed fascial flap. Postoperatively, flap survival, complications, and patient functional recovery were evaluated. RESULTS: Distally based sural turnover adipofascial flaps were used in 12 cases with complicated wounds of the distal third lower leg, foot, and ankle region. All wounds were caused by trauma and experienced fracture implants fixation and 5 with osteomyelitis. The comorbidities include diabetes in 9 cases and smoking in 7. There were 8 medial ural flaps and 4 lateral sural flaps. The adipofiscial flaps measured from 6.0 cm × 5.0 cm to 17.0 cm × 6.0 cm (mean, 61.3 cm). Postoperatively, all flaps survived uneventfully without any complication such as flap ischemia and/or necrosis. Two minor donor site complications were encountered, one was postoperative hematoma, and another was hyperproliferative scar. After a mean of 14.6 months of follow-up, the adipofascial flap plus skin graft showed a durable esthetic coverage, with normal shoe wearing and walking. CONCLUSIONS: Distally based sural adipofascial turnover flap is a simple and reliable wound coverage technique. It avoids venous congestion as usually seen in distally based fasciocutaneous flaps.

A reliable method for intraoperative detection of lateral malleolar malrotation using conventional fluoroscopy.

OBJECTIVE: To introduce a new method for intraoperative detection of rotational malreduction of the lateral malleolus using conventional fluoroscopy. MATERIAL AND METHODS: From January 2014 to December 2017, 56 Weber type C unstable lateral malleolar fractures with syndesmosis injury were identified. The fibular fracture patterns were simple oblique or transverse in 20, comminuted in 25, and Maisonneuve injury with fibular neck fractures in 11 cases. 47 cases were operated with ORIF, and 9 cases of Maisonneuve fractures were operated with CRIF. The mortise view of the contralateral uninjured ankle was used for intraoperative comparison. Two indexes were applied for fluoroscopic detection of distal fibula malrotation, i.e. the contour profile change in lateral malleolar shape, and the intrinsic structure appearance of lateral malleolar fossa cortex. Postoperative talofibular joint congruency was measured on axial CT scan to confirm the reduction quality. RESULTS: Using the two radiographic parameters for intraoperative fluoroscopic evaluation, we finally achieved satisfying reduction and fixation of the lateral malleolus in all 56 cases. A more spoon-shaped fibula profile and disappearance of the lateral fossa cortex shadow indicates an internal rotation, while a more pointed blade-shaped fibula profile and disappearance of lateral fossa cortex shadow indicates an external rotation. Postoperative CT scanning identified distal fibular no rotation in 44 cases (78.6%), mild rotation less than 5° in 12 cases (21.4%), with 7 cases internal rotation (mean 3.1°) and 5 cases external rotation (mean 2.8°). CONCLUSION: Using conventional intraoperative fluoroscopy on mortise view, new radiographic parameters can provide reliable method to detect rotational malreduction of the lateral malleolus.

Inferior calcar buttress reduction pattern for displaced femoral neck fractures in young adults: a preliminary report and an effective alternative.

BACKGROUND: Fracture reduction quality is of paramount importance for osteosynthesis. The aim of this study was to report the outcome of an inferior cortical buttress non-anatomic reduction pattern and internal fixation for displaced femoral neck fractures (Garden types III and IV) in young adults. METHODS: A retrospective analysis of 46 displaced femoral neck fractures was performed, which were treated by closed reduction and internal fixation with parallel cannulated screws. There were 20 males and 26 females, with an average age of 50.3 years (19-60). According to the inferior cortical reduction quality seen in recorded intraoperative fluoroscopy, the patients were divided into two groups. Group I (n = 30) was anatomic cortical apposition as the two inferior cortices were smoothly contacted, and group II (n = 16) was buttress cortical apposition as the two inferior cortices were located in positive support contact (Gotfried reduction pattern). With a mean follow-up of 22.0 months, femoral neck length, neck-shaft angle, and clinical outcomes were compared. RESULTS: Thirty-nine patients (84.8%) achieved uneventful fracture union. Complications occurred in seven patients, six in group I (20%) and one in group II (6.3%), including displacement to varus, neck shortening, early fixation failure, nonunion, and avascular necrosis of the femoral head. No significant difference existed in the complication rate between the two groups (p = 0.216). Four patients (13.3%) in group I were converted to prosthetic replacement, but none in group II. CONCLUSIONS: For closed reduction and fixation of displaced femoral neck fractures in young adults, an inferior cortical buttress reduction pattern, though non-anatomic, can produce sustainable fracture stability and predictable clinical outcomes.