Digital inverse patterning solutions for fabrication of high-fidelity microstructures in spatial light modulator (SLM)-based projection lithography.

Digital mask projection lithography (DMPL) technology is gaining significant attention due to its characteristics of free-mask, flexibility, and low cost. However, when dealing with target layouts featuring sizes smaller than the wavelength scale, accurately producing resist patterns that closely match the target layout using conventional methods to design the modulation coefficients of digital masks produced by spatial light modulators (SLM) becomes challenging. Here, we present digital inversion lithography technology (DILT), which offers what we believe to be a novel approach to reverse engineer the modulation coefficients of digital masks. In the case of binary amplitude modulation, DILT achieves a remarkable reduction in pattern errors (PE), reaching the original 0.26. At the same time, in the case of the gray amplitude modulation, the PE can be reduced to the original 0.05, which greatly improves the high-fidelity transfer of the target layout. This significant improvement enhances the accuracy of target design transfer. By leveraging the capabilities of DILT, DMPL can now attain higher precision and reliability, paving the way for more advanced applications in the field of micro-nano device manufacturing.

Optical proximity correction of hot-spot patterns with subwavelength size in DMD maskless projection lithography.

When the critical dimension (CD) of resist patterns nears the resolution limit of the digital micromirror device (DMD) maskless projection lithography (DMD-MPL), significant distortion can emerge in the silicon wafer due to the optical proximity effect (OPE). The significant distortion (breakpoints, line-end scaling, corner rounding, etc.) between resist patterns and target patterns results in reduced lithographic quality. To address this issue, we have proposed a pixel-based optical proximity correction (PB-OPC) method used for the hot-spot patterns with subwavelength sizes specifically designed for DMD-MPL. Employing an end-to-end learning neural network, the PB-OPC algorithm is both straightforward and efficient. A well-trained U-net framework facilitates the mapping from unoptimized masks to optimized masks. Experimental exposure trials have demonstrated that this method not only corrects OPC in general patterns but also effectively rectifies hot-spot patterns. The pattern error (PE) value can be reduced by about 30% in the design layouts. We believe this approach holds the potential to enhance the resolution and fidelity of resist patterns in DMD maskless lithography.

Identification method of thyroid nodule ultrasonography based on self-supervised learning dual-branch attention learning framework.

Thyroid ultrasound is a widely used diagnostic technique for thyroid nodules in clinical practice. However, due to the characteristics of ultrasonic imaging, such as low image contrast, high noise levels, and heterogeneous features, detecting and identifying nodules remains challenging. In addition, high-quality labeled medical imaging datasets are rare, and thyroid ultrasound images are no exception, posing a significant challenge for machine learning applications in medical image analysis. In this study, we propose a Dual-branch Attention Learning (DBAL) convolutional neural network framework to enhance thyroid nodule detection by capturing contextual information. Leveraging jigsaw puzzles as a pretext task during network training, we improve the network's generalization ability with limited data. Our framework effectively captures intrinsic features in a global-to-local manner. Experimental results involve self-supervised pre-training on unlabeled ultrasound images and fine-tuning using 1216 clinical ultrasound images from a collaborating hospital. DBAL achieves accurate discrimination of thyroid nodules, with a 88.5% correct diagnosis rate for malignant and benign nodules and a 93.7% area under the ROC curve. This novel approach demonstrates promising potential in clinical applications for its accuracy and efficiency.

The Role and Mechanism of Spinal NF-κB-CXCL1/CXCR2 in Rats with Nucleus Pulposus-induced Radicular Pain.

STUDY DESIGN: Experimental study of the role and mechanism of spinal NFκB-CXCL1/CXCR2 in rats with nucleus pulposus-induced radicular pain. OBJECTIVE: This study investigated the role and mechanism of spinal NFκB-CXCL1/CXCR2 in autologous nucleus pulposus-induced pain behavior in rats and to clarify the involvement and regulation of spinal NFκB as an upstream molecule of CXCL1 in autologous nucleus pulposus-induced radicular pain in rats. SUMMARY OF BACKGROUND DATA: The inflammatory response of nerve roots is an important mechanism for the occurrence of chronic pain. NFκB-CXCL1/CXCR2 pathway plays an important role in the development of radicular pain, but its regulatory mechanism in the model of radicular pain induced by autologous nucleus pulposus is still unclear. MATERIALS AND METHODS: We established a rat model of autologous medullary nucleus transplantation. We observed and recorded the changes in 50% mechanical withdrawal threshold and thermal withdrawal latency before and after the administration of CXCL1-neutralizing antibodies, CXCR2 inhibitor, and NFκB inhibitor in each group of rats and evaluated the expression of NFκB, CXCL1, and CXCR2 in the spinal dorsal horn using immunofluorescence and Western blot. To compare differences between groups in behavioral testing, analysis of variance was employed. Dunnett's method was used to compare differences at different time points within a group and between different groups at the same time point. A comparison of the relative concentration of protein, relative concentration of mRNA, and semiquantitative data from immunofluorescence staining was conducted utilizing one-way ANOVA and Dunnett's pairwise comparison. RESULTS: Autologous nucleus pulposus transplantation can induce radicular pain in rats and upregulate the expression of CXCL1, CXCR2, and NFκB in the spinal cord. CXCL1 is co-expressed with astrocytes, CXCR2 with neurons, and NFκB with both astrocytes and neurons. The application of CXCL1 neutralizing antibodies, CXCR2 inhibitors, and NFκB inhibitors can alleviate pain hypersensitivity induced by autologous nucleus pulposus transplantation in rats. Inhibitors of NFκB could downregulate the expression of CXCL1 and CXCR2. CONCLUSIONS: We found that spinal NFκB is involved in NP-induced radicular pain in rats through the activation of CXCL1/CXCR2, enriching the mechanism of medullary-derived radicular pain and providing a possible new target and theoretical basis for the development of more effective anti-inflammatory and analgesic drugs for patients with chronic pain following LDH.

Generating an M2 × N2 spot array with a dual-period hybrid Dammann grating fabricated using maskless projection lithography.

The Dammann grating (DG), which redistributes a collimated laser beam into a spot array with a uniform intensity, is a widely adopted approach for profile measurement. Conventional DGs for dense spot projection are binary phase gratings with precisely designed groove structures, which suffer from low efficiency, poor uniformity, and a hard-to-fabricate fine feature size when utilized for a large field of view (FOV). Here, we propose a new, to the best of our knowledge, hybrid DG architecture consisting of two different grating periods which effectively generates an engineering M2 × N2 spot array with a non-complex structural design. As a proof-of-concept, a dual-period hybrid DG with a two-scale grating period ratio of 11.88 µm/95.04 µm (∼1/8) is designed and fabricated as a means to generate a dense 72 × 72 diffraction spot array with a FOV of 17° × 17°. In addition, the DG exhibits superior performance, with a high efficiency (>60%) and a low non-uniformity (<18%) at a wavelength of 532 nm. This kind of hybrid DG constructed from photoresist patterns with a minimum feature size of ∼1.2 µm can be perfectly fabricated by maskless projection lithography for large-scale and low-cost production. The proposed dual-period hybrid DG can pave the way for depth-perception-related applications such as face unlocking and motion sensing.

Responses of nitrogen and phosphorus resorption of understory plants to microscale soil nutrient hetero-geneity in Chinese fir plantation.

We compared the interspecific differences in leaf nutrient resorption of two dominant understory species (Lophatherum gracile and Oplimenus unulatifolius), and analyzed the correlations between the intraspecific efficiency of leaf nutrient resorption and nutrient properties of soil and leaves in Chinese fir plantation. The results showed high soil nutrient heterogeneity in Chinese fir plantation. Soil inorganic nitrogen content and available phosphorus content varied from 8.58 to 65.29 mg·kg-1 and from 2.43 to 15.20 mg·kg-1 in the Chinese fir plantation, respectively. The soil inorganic nitrogen content in O. undulatifolius community was 1.4 times higher than that in L. gra-cile community, but there was no significant difference in soil available phosphorus content between the two communities. Both leaf nitrogen and phosphorus resorption efficiency of O. unulatifolius was significantly lower than that of L. gracile under the three measurement bases of leaf dry weight, leaf area, and lignin content. Resorption efficiency in L. gracile community expressed on leaf dry weight was lower than that expressed on leaf area and lignin content, while resorption efficiency expressed on leaf area was the lowest in O. unulatifolius community. The intraspecific resorption efficiency was significantly correlated with leaf nutrient contents, but was less correlated with soil nutrient content, and only the nitrogen resorption efficiency of L. gracile had significant positive correlation with soil inorganic nitrogen content. The results indicated that there was significant difference in the leaf nutrient resorption efficiency between the two understory species. Soil nutrient heterogeneity exerted a weak effect on the intraspecific nutrient resorption, which might be attributed to high soil nutrient availability and potential disturbance from canopy litter in Chinese fir plantation.

Effects of acid rain and root exclusion on soil organic carbon in Cunninghamia lanceolata and Michelia macclurei plantations.

Acid rain is one of most serious environment problems in China. The types of acid rain have gradually transformed from sulfuric acid rain (SAR) to mixed acid rain (MAR) and nitric acid rain (NAR) in recent years. Roots are one source of soil organic carbon and play an important role in the formation of soil aggregates. However, the changes in acid rain type and the effect of root removal on soil organic carbon in forest ecosystems are poorly understood. In this study, we removed roots and simulated acid rain with different types (SO42-:NO3- ratio of 4:1, 1:1, and 1:4) for three years in Cunninghamia lanceolata (CP) and Michelia macclurei (MP) plantations to analyze the changes of soil organic carbon and physical properties and to measure the size and mean weight diameter (MWD) of aggregates. Results showed that root removal in C. lanceolata and M. macclurei remarkably reduced soil organic carbon pool by 16.7 % and 21.5%, and soil recalcitrant carbon by 13.5% and 20.0%, respectively. Root removal substantially decreased the MWD and proportion and organic carbon content of soil macroaggregates in M. macclurei, but not in C. lanceolata. Acid rain did not affect soil organic carbon pool and soil aggregate structures. Our results indicated that roots promote soil organic carbon stabilization and that their contribution to the stability of soil organic carbon varies with forest types. Moreover, soil organic carbon stabilization is not affected by different types of acid rain in the short term.

Changes of optic nerve head microcirculation in high myopia.

AIM: To analyze the correlation of age, spherical equivalent (SE), and axial length (AL) with the microcirculation of optic nerve head (ONH) in high myopia (HM). METHODS: In this cross-sectional clinical study, 164 right eyes were included. Optical coherence tomography angiography (OCTA) was used to detect ONH vessel density. Eyes were classified based on age, SE, and AL. Groups of Age1, Age2, and Age3 were denoted for age classification (Age1<20y, 20y≤Age2<30y, Age3≥30y); Groups SE1, SE2, and SE3 for the SE classification (-9≤SE1<-6 D, -12≤SE2<-9 D, SE3<-12 D); Groups AL1, AL2, AL3, and AL4 for the AL classification (AL1<26 mm, 26≤AL2<27 mm, 27≤AL3<28 mm, AL4≥28 mm). RESULTS: No significant difference was observed in vessel density among the Age1, Age2, and Age3 groups (all P>0.05) and the SE1, SE2, and SE3 groups (all P>0.05). No significant difference was observed in the intrapapillary vascular density (IVD) among AL1, AL2, AL3, and AL4 groups (P>0.05). However, a significant decrease was found in the peripapillary vascular density (PVD) in the AL1, AL2, AL3, and AL4 groups (F=3.605, P=0.015), especially in the inferotemporal (IT; F=6.25, P<0.001), temporoinferior (TI; F=2.865, P=0.038), and temporosuperior (TS; F=6.812, P<0.001) sectors. The IVD was correlated with age (r=-0.190, P<0.05) but not with SE or AL (P>0.05). The PVD was correlated with AL (r=-0.236, P<0.01) but not with age or SE (P>0.05). CONCLUSION: With the increase of AL, the IVD remains stable while the PVD decreases, especially in the three directions of temporal (IT, TI, and TS). The main cause of microcirculation reduction may be related to AL elongation rather than an increase in age or SE.

Label-free neural networks-based inverse lithography technology.

Neural network-based inverse lithography technology (NNILT) has been used to improve the computational efficiency of large-scale mask optimization for advanced photolithography. NNILT is now mostly based on labels, and its performance is affected by the quality of labels. It is difficult for NNILT to achieve high performance and extrapolation ability for mask optimization without using labels. Here, we propose a label-free NNILT (LF-NNILT), which is implemented completely without labels and greatly improves the printability of the target layouts and the manufacturability of the synthesized masks compared to the traditional ILT. More importantly, the optimization speed of LF-NNILT is two orders of magnitude faster than the traditional ILT. Furthermore, LF-NNILT is simpler to implement and can achieve better solvers to support the development of advanced lithography.

Consistent pattern printing of the gap structure in femtosecond laser DMD projection lithography.

Maskless lithography technologies have been developed and played an important role in the fabrication of functional micronano devices for microelectronics, biochips and photonics. Optical projection lithography based on digital micromirror device (DMD) is an efficient maskless lithography technology that can rapidly fabricate complex structures. The precise modulation of gap width by DMD maskless optical projection lithography (MOPL) using femtosecond laser becomes important for achieving micronano structures. Herein, we have investigated the relationship between the structure morphology and the light intensity distribution at the image plane by multi-slit diffraction model and Abbe imaging principle, and optimized the gap width more accurately by modulating exposure energy. The aperture diameter of the objective lens has a substantial effect on the pattern consistency. The continuously adjustable structural gap widths of 2144 nm, 2158 nm and 1703 nm corresponding to 6, 12, 24 pixels are obtained by varying the exposure energy in the home-built MOPL system. However, the ideal gap structure cannot be obtained only by adjusting the exposure energy when the gap width is small, such as 1 or 2 pixels. Furthermore, we have proposed an alternative way to achieve fine gap structures through the structural decomposition design and precise control of exposure energy in different regions without changing the MOPL optical system. This study would provide a promising protocol for fabricating gap microstructures with controllable configuration using MOPL technique.

λ/30 inorganic features achieved by multi-photon 3D lithography.

It's critically important to construct arbitrary inorganic features with high resolution. As an inorganic photoresist, hydrogen silsesquioxane (HSQ) has been patterned by irradiation sources with short wavelength, such as EUV and electron beam. However, the fabrication of three- dimensional nanoscale HSQ features utilizing infrared light sources is still challenging. Here, we demonstrate femtosecond laser direct writing (FsLDW) of HSQ through multi-photon absorption process. 26 nm feature size is achieved by using 780 nm fs laser, indicating super-diffraction limit photolithography of λ/30 for HSQ. HSQ microstructures by FsLDW possess nanoscale resolution, smooth surface, and thermal stability up to 600 °C. Furthermore, we perform FsLDW of HSQ to construct structural colour and Fresnel lens with desirable optical properties, thermal and chemical resistance. This study demonstrates that inorganic features can be flexibly achieved by FsLDW of HSQ, which would be prospective for fabricating micro-nano devices requiring nanoscale resolution, thermal and chemical resistance.

Efficient 4.95 µm-8.5 µm dual-band grating coupler with crosstalk suppression capability.

In many integrated optics systems, grating couplers are a key component of interfacing the external light source with in-plane photonic devices. Grating couplers with dual-band capability are often desired for expanding the operation spectrum of photonic systems. Here, we propose and theoretically investigate, for the first time, a 4.95 µm-8.5 µm dual-band grating coupler on a Ge-on-SOI platform. In addition to conventional structures, Bragg gratings are introduced to two wavelength division directions for crosstalk suppression. With this design, the simulated coupling efficiencies have respectively reached 59.93% and 46.38% for the 4.95 µm and 8.5 µm bands. This mid-infrared dual-band grating coupler may be useful for defense and environmental monitoring applications.

Maximizing energy utilization in DMD-based projection lithography.

In digital micromirror device (DMD)-based projection photolithography, the throughput largely depends on the effectiveness of the laser energy utilization, which is directly correlated to the diffraction efficiency of DMD. Here, to optimize the DMD diffraction efficiency and thus the laser energy utilization, we calculate the diffraction efficiencies Ediffraction of DMD with various pitch sizes at wavelengths ranging from 200 nm to 800 nm, using the two-dimensional blazed grating diffraction theory. Specifically, the light incident angle is optimized for 343 nm laser and 7.56 µm pitch-size DMD, and the maximum single-order diffraction efficiency Ediffraction is increased from 40% to 96%. Experimentally, we use the effective energy utilization ηeff = Ediffraction,(m,n)/Σ[Ediffraction,(m,n)] at the entrance pupil plane of the objective to verify the effectiveness of the optimized illumination angle in a lithography illumination system with parallel beams of two wavelengths (343 nm and 515 nm). The ηeff of a "blaze" order at a 34° angle of incidence can be optimized up to 88%. The experimental results are consistent with the tendency of the calculated results, indicating that this optimization model can be used to improve the energy utilization of projection lithography with the arbitrarily designable wavelengths and the DMD's pitch size.

Analysis of intestinal microbial diversity in Leopoldamys edwardsi based on illumina sequencing technique / 中华预防医学杂志

To explore the composition and diversity of the intestinal microflora of Leopoldamys edwardsi in Hainan Island. In November 2019, DNA was extracted from fecal samples of 25 adult Leopoldamys edwardsi (14 males and 11 females) in Hainan Island at the Joint Laboratory of tropical infectious diseases of Hainan Medical College and Hong Kong University. Based on the IonS5TMXL sequencing platform, single-end sequencing (Single-End) was used to construct a small fragment library for single-end sequencing. Based on Reads shear filtration and OTUs clustering. The species annotation and abundance analysis of OTUs were carried out by using mothur method and SSUrRNA database, and further conducted α diversity and β diversity analysis. A total of 1481842 high quality sequences, belonging to 14 Phyla, 85 families and 186 Genera, were obtained from 25 intestinal excrement samples of Leopoldamys edwardsi. At the level of phyla classification, the main core biota of the Leopoldamys edwardsi contained Firmicutes (46.04%),Bacteroidetes (25.34%), Proteobacteria (17.09%), Tenericutes (7.38%) and Actinobacteria (1.67%), these five phyla account for 97.52% of all phyla. The ratio of Helicobacter which occupied the largest proportion at the genus level was 12.44%, followed by Lactobacillus (11.39%), Clostridium (6.19%),Mycoplasma (4.23%) and Flavonifractor (3.52%). High throughput sequencing analysis showed that the intestinal flora of Leopoldamys edwardsi in Hainan Island was complex and diverse, which had the significance of further research.

Effect of metformin on adiponectin in PCOS: A meta-analysis and a systematic review.

BACKGROUND: Conflicting results have been reported regarding the effect of metformin on adiponectin levels in women with polycystic ovary syndrome (PCOS). This meta-analysis reviewed all studies comparing adiponectin levels before and after metformin treatment in PCOS women. Additionally, changes in other indicators, including long-term complications associated with PCOS, such as inflammatory, metabolism factors and hormonal profile, were investigated following metformin treatment. We conducted subgroup analysis based on body mass index (BMI) stratification and appropriate pooling. METHODS: We searched literature in PUBMED, EMBASE, the Cochrane Library, and CNKI databases. The main meta-analysis included 11 studies containing data on 353 subjects. RESULTS: Metformin treatment was associated with significantly increased serum adiponectin concentrations [10 studies, random-effects SMD (95% CI) -0.58 [-1.03, -0.13]; I2 = 86%; P = 0.01]. Additionally, the meta-analysis revealed that circulating tumor necrosis factor-α(TNF-α) and C-reactive protein (CRP) concentrations were significantly decreased after metformin treatment, with corresponding SMDs of 1.01 (95% CI: 0.74-1.28, P＜0.00001) and 0.48(95% CI: 0.35-0.60, P＜0.00001). CONCLUSION: Following metformin administration, serum adiponectin concentrations of PCOS women were found to be significantly increased, accompanied by a significant improvement in other indicators. Further investigation with a larger sample size should be conducted to validate optimal dose and duration of metformin.

Femtosecond laser trapping nanoprinting of silver micro/nanostructures.

In this paper, silver micro/nanostructures composed of sintered nanoparticles were printed by capturing silver nanoparticles in water with 800 nm femtosecond laser trapping. Relationships of laser power, scanning speed, nanoparticle concentration, and the width and morphology of fabricated silver wire were systematically investigated. It is found that low scanning speed and high nanoparticle concentration favor the printing of silver wire with good morphology. A silver wire with width of 305 nm was printed. Electrical resistivities of printed wires are about 24 times that of bulk silver. Silver grid structures and dot arrays were printed by using this technology. Several three-dimensional silver cuboid structures were also printed. This work provides a protocol for printing of three-dimensional metallic micro/nanostructures using laser trapping. These printed structures have great application prospects in metamaterials, flexible electronics, and SERS.

Therapeutic effect of Keap1-Nrf2-ARE pathway-related drugs on age-related eye diseases through anti-oxidative stress.

Age-related eye diseases, including cataract, glaucoma, diabetic retinopathy (DR), and age-related macular degeneration (AMD), are the leading causes of vision loss in the world. Several studies have shown that the occurrence and development of these diseases have an important relationship with oxidative stress in the eye. The Keap1-Nrf2-ARE pathway is a classical pathway that resists oxidative stress and inflammation in the body. This pathway is also active in the development of age-related eye diseases. A variety of drugs have been shown to treat age-related eye diseases through the Keap1-Nrf2-ARE (Kelch-like ECH-Associating protein 1- nuclear factor erythroid 2 related factor 2-antioxidant response element) pathway. This review describes the role of oxidative stress in the development of age-related eye diseases, the function and regulation of the Keap1-Nrf2-ARE pathway, and the therapeutic effects of drugs associated with this pathway on age-related eye diseases.

λ/12 Super Resolution Achieved in Maskless Optical Projection Nanolithography for Efficient Cross-Scale Patterning.

The emerging demand for device miniaturization and integration prompts the patterning technique of micronano-cross-scale structures as an urgent desire. Lithography, as a sufficient patterning technique, has been playing an important role in achieving functional micronanoscale structures for decades. As a promising alternative, we have proposed and demonstrated the maskless optical projection nanolithography (MLOP-NL) technique for efficient cross-scale patterning. A minimum feature size of 32 nm, which is λ/12 super resolution breaking the optical diffraction limit, has been achieved by a single exposure. Furthermore, multiscale two-dimensional micronano-hybrid structures with the size over hundreds of micrometers and the precision at tens of nanometers have been fabricated by simply controlling the exposure conditions. The proposed MLOP-NL technique provides a powerful tool for achieving cross-scale patterning with both large-scale and precise configuration with high efficiency, which can be potentially used in the fabrication of multiscale integrated microsystems.

Glucocorticoid supplementation improves reproductive outcomes in infertile women with antithyroid autoimmunity undergoing ART: A meta-analysis.

BACKGROUND: Thyroid autoimmune disease (TAI) has been verified to be related to multiple adverse pregnancy outcomes. A growing number of evidences highlight the protective roles of glucocorticoid on the treatments of TAI. This meta-analysis aimed to study whether it is beneficial to add glucocorticoid treatment in infertile women with TAI when they are undergoing assisted reproductive technology (ART). METHODS: We conducted a systematic search in PubMed, EMBASE, Cochrane Library, China National Knowledge Infrastructure (CNKI), WanFang database, Weipu China Science and Technology Journal Databases (VIP database) up to September 10, 2020. The Revman 5.3 software was utilized for data statistics. We used a random-effects model to analyze data and the odds ratio (OR) combining with 95% confidence interval (95% CI) were employed to reveal the results. RESULTS: Three publications with 237 antithyroid antibody (ATA)-positive and 384 ATA-negative women were included in the final analysis. Overall, glucocorticoid therapy showed satisfying effects on improving clinical pregnancy rate (OR = 4.63, 95% CI [2.23, 9.58], I2 = 0.0%, P < .0001) and live birth rate (OR = 3.19, 95% CI [1.13, 9.04], I2 = 0.0%, P = .03) of ATA-positive women compared with control group. However, it seems that glucocorticoid showed no significant difference in the abortion rate (OR = 0.62, 95% CI [0.09, 4.32], I2 = 35%, P = .64) and oocyte recovery (OR = 2.26, 95% CI [-1.46, 5.99], I2 = 79%, P < .0001) between the 2 groups. CONCLUSIONS: Glucocorticoid may improve the pregnancy outcomes of ART women with ATA positive, but there is no significant reduction in the risk of miscarriage. Due to the limited enrolled references, glucocorticoid adjuvant therapy should be applied after more randomized controlled trials.

Cucurbit[7]uril-Carbazole Two-Photon Photoinitiators for the Fabrication of Biocompatible Three-Dimensional Hydrogel Scaffolds by Laser Direct Writing in Aqueous Solutions.

We have introduced a novel water-soluble two-photon photoinitiator based on the host-guest interaction between 3,6-bis[2-(1-methyl-pyridinium)vinyl]-9-pentyl-carbazole diiodide (BMVPC) and cucurbit[7]uril (CB7) because most of the commercial photoinitiators have poor two-photon initiating efficiency in aqueous solutions. The binding ratio of BMVPC and CB7 was determined as 1:1 by isothermal titration calorimetry and quantum chemical calculation. The formation of the host-guest complex increases the two-photon absorption cross-section about five times, and improves the water solubility required as the photoinitiator for hydrogel fabrication. The BMVPC-CB7 inclusion complex was used as the one-component photoinitiator, and the polyethylene glycol diacrylate with promising biocompatibility was used as the hydrogel monomer to form the aqueous-phase photoresist system applied to two-photon polymerization microfabrication. A relatively low laser threshold of 4.5 mW, a high fabricating resolution of 180 nm, and the true three-dimensional (3D) fabricating capability in the aqueous solution have been obtained by using the as-prepared photoresist system. Finally, 3D engineering hydrogel scaffold microstructures with low toxicity and good biocompatibility have been fabricated and cocultured with living HeLa cells, which demonstrates the potential for further application in tissue engineering.