Previsual and Early Detection of Myrtle Rust on Rose Apple Using Indices Derived from Thermal Imagery and Visible-to-Short-Infrared Spectroscopy.

Myrtle rust, caused by the fungus Austropuccinia psidii, is a serious disease, which affects many Myrtaceae species. Commercial nurseries that propagate Myrtaceae species are prone to myrtle rust and require a reliable method that allows previsual and early detection of the disease. This study uses time-series thermal imagery and visible-to-short-infrared spectroscopy measurements acquired over 10 days from 81 rose apple plants (Syzygium jambos) that were either inoculated with myrtle rust or maintained disease-free. Using these data, the objectives were to (i) quantify the accuracy of models using thermal indices and narrowband hyperspectral indices (NBHI) for previsual and early detection of myrtle rust using data from older resistant green leaves and young susceptible red leaves and (ii) identify the most important NBHI and thermal indices for disease detection. Using predictions made on a validation dataset, models using indices derived from thermal imagery were able to perfectly (F1 score = 1.0; accuracy = 100%) distinguish control from infected plants previsually one day before symptoms appeared (1 DBS) and for all stages after early symptoms appeared. Compared with control plants, plants with myrtle rust had lower and more variable normalized canopy temperature, which was associated with higher stomatal conductance and transpiration. Using NBHI derived from green leaves, excellent previsual classification was achieved 3 DBS, 2 DBS, and 1 DBS (F1 score range = 0.89 to 0.94). The accurate characterization of myrtle rust during previsual and early stages of disease development suggests that a robust detection methodology could be developed within a nursery setting. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Genomic selection for resistance to mammalian bark stripping and associated chemical compounds in radiata pine.

The integration of genomic data into genetic evaluations can facilitate the rapid selection of superior genotypes and accelerate the breeding cycle in trees. In this study, 390 trees from 74 control-pollinated families were genotyped using a 36K Axiom SNP array. A total of 15,624 high-quality SNPs were used to develop genomic prediction models for mammalian bark stripping, tree height, and selected primary and secondary chemical compounds in the bark. Genetic parameters from different genomic prediction methods-single-trait best linear unbiased prediction based on a marker-based relationship matrix (genomic best linear unbiased prediction), multitrait single-step genomic best linear unbiased prediction, which integrated the marker-based and pedigree-based relationship matrices (single-step genomic best linear unbiased prediction) and the single-trait generalized ridge regression-were compared to equivalent single- or multitrait pedigree-based approaches (ABLUP). The influence of the statistical distribution of data on the genetic parameters was assessed. Results indicated that the heritability estimates were increased nearly 2-fold with genomic models compared to the equivalent pedigree-based models. Predictive accuracy of the single-step genomic best linear unbiased prediction was higher than the ABLUP for most traits. Allowing for heterogeneity in marker effects through the use of generalized ridge regression did not markedly improve predictive ability over genomic best linear unbiased prediction, arguing that most of the chemical traits are modulated by many genes with small effects. Overall, the traits with low pedigree-based heritability benefited more from genomic models compared to the traits with high pedigree-based heritability. There was no evidence that data skewness or the presence of outliers affected the genomic or pedigree-based genetic estimates.

High density linkage maps, genetic architecture, and genomic prediction of growth and wood properties in Pinus radiata.

BACKGROUND: The growing availability of genomic resources in radiata pine paves the way for significant advances in fundamental and applied genomic research. We constructed robust high-density linkage maps based on exome-capture genotyping in two F1 populations, and used these populations to perform quantitative trait locus (QTL) scans, genomic prediction and quantitative analyses of genetic architecture for key traits targeted by tree improvement programmes. RESULTS: Our mapping approach used probabilistic error correction of the marker data, followed by an iterative approach based on stringent parameters. This approach proved highly effective in producing high-density maps with robust marker orders and realistic map lengths (1285-4674 markers per map, with sizes ranging from c. 1643-2292 cM, and mean marker intervals of 0.7-2.1 cM). Colinearity was high between parental linkage maps, although there was evidence for a large chromosomal rearrangement (affecting ~ 90 cM) in one of the parental maps. In total, 28 QTL were detected for growth (stem diameter) and wood properties (wood density and fibre properties measured by Silviscan) in the QTL discovery population, with 1-3 QTL of small to moderate effect size detected per trait in each parental map. Four of these QTL were validated in a second, unrelated F1 population. Results from genomic prediction and analyses of genetic architecture were consistent with those from QTL scans, with wood properties generally having moderate to high genomic heritabilities and predictive abilities, as well as somewhat less complex genetic architectures, compared to growth traits. CONCLUSIONS: Despite the economic importance of radiata pine as a plantation forest tree, robust high-density linkage maps constructed from reproducible, sequence-anchored markers have not been published to date. The maps produced in this study will be a valuable resource for several applications, including the selection of marker panels for genomic prediction and anchoring a recently completed de novo whole genome assembly. We also provide the first map-based evidence for a large genomic rearrangement in radiata pine. Finally, results from our QTL scans, genomic prediction, and genetic architecture analyses are informative about the genomic basis of variation in important phenotypic traits.

Chasing genetic correlation breakers to stimulate population resilience to climate change.

Global climate change introduces new combinations of environmental conditions, which is expected to increase stress on plants. This could affect many traits in multiple ways that are as yet unknown but will likely require the modification of existing genetic relationships among functional traits potentially involved in local adaptation. Theoretical evolutionary studies have determined that it is an advantage to have an excess of recombination events under heterogeneous environmental conditions. Our study, conducted on a population of radiata pine (Pinus radiata D. Don), was able to identify individuals that show high genetic recombination at genomic regions, which potentially include pleiotropic or collocating QTLs responsible for the studied traits, reaching a prediction accuracy of 0.80 in random cross-validation and 0.72 when whole family was removed from the training population and predicted. To identify these highly recombined individuals, a training population was constructed from correlation breakers, created through tandem selection of parents in the previous generation and their consequent mating. Although the correlation breakers showed lower observed heterogeneity possibly due to direct selection in both studied traits, the genomic regions with statistically significant differences in the linkage disequilibrium pattern showed higher level of heretozygosity, which has the effect of decomposing unfavourable genetic correlation. We propose undertaking selection of correlation breakers under current environmental conditions and using genomic predictions to increase the frequency of these 'recombined' individuals in future plantations, ensuring the resilience of planted forests to changing climates. The increased frequency of such individuals will decrease the strength of the population-level genetic correlations among traits, increasing the opportunity for new trait combinations to be developed in the future.

Marker Selection in Multivariate Genomic Prediction Improves Accuracy of Low Heritability Traits.

Multivariate analysis using mixed models allows for the exploration of genetic correlations between traits. Additionally, the transition to a genomic based approach is simplified by substituting classic pedigrees with a marker-based relationship matrix. It also enables the investigation of correlated responses to selection, trait integration and modularity in different kinds of populations. This study investigated a strategy for the construction of a marker-based relationship matrix that prioritized markers using Partial Least Squares. The efficiency of this strategy was found to depend on the correlation structure between investigated traits. In terms of accuracy, we found no benefit of this strategy compared with the all-marker-based multivariate model for the primary trait of diameter at breast height (DBH) in a radiata pine (Pinus radiata) population, possibly due to the presence of strong and well-estimated correlation with other highly heritable traits. Conversely, we did see benefit in a shining gum (Eucalyptus nitens) population, where the primary trait had low or only moderate genetic correlation with other low/moderately heritable traits. Marker selection in multivariate analysis can therefore be an efficient strategy to improve prediction accuracy for low heritability traits due to improved precision in poorly estimated low/moderate genetic correlations. Additionally, our study identified the genetic diversity as a factor contributing to the efficiency of marker selection in multivariate approaches due to higher precision of genetic correlation estimates.

Effect of trait's expression level on single-step genomic evaluation of resistance to Dothistroma needle blight.

BACKGROUND: Many conifer breeding programs are paying increasing attention to breeding for resistance to needle disease due to the increasing importance of climate change. Phenotyping of traits related to resistance has many biological and temporal constraints that can often confound the ability to achieve reliable phenotypes and consequently, reliable genetic progress. The development of next generation sequencing platforms has also enabled implementation of genomic approaches in species lacking robust reference genomes. Genomic selection is, therefore, a promising strategy to overcome the constraints of needle disease phenotyping. RESULTS: We found high accuracy in the prediction of genomic breeding values in the disease-related traits that were well characterized, reaching 0.975 for genotyped individuals and 0.587 for non-genotyped individuals. This compared well with pedigree-based accuracies of up to 0.746. Surprisingly, poorly phenotyped disease traits also showed very high accuracy in terms of correlation of predicted genomic breeding values with pedigree-based counterparts. However, this was likely caused by the fact that both were clustered around the population mean, while deviations from the population mean caused by genetic effects did not appear to be well described. Caution should therefore be taken with the interpretation of results in poorly phenotyped traits. CONCLUSIONS: Implementation of genomic selection in this test population of Pinus radiata resulted in a relatively high prediction accuracy of needle loss due to Dothistroma septosporum compared with a pedigree-based approach. Using genomics to avoid biological/temporal constraints where phenotyping is reliable appears promising. Unsurprisingly, reliable phenotyping, resulting in good heritability estimates, is a fundamental requirement for the development of a reliable prediction model. Furthermore, our results are also specific to the single pathogen mating-type that is present in New Zealand, and may change with future incursion of other pathogen varieties. There is no doubt, however, that once a robust genomic prediction model is built, it will be invaluable to not only select for host tolerance, but for other economically important traits simultaneously. This tool will thus future-proof our forests by mitigating the risk of disease outbreaks induced by future changes in climate.

Forest-Scale Phenotyping: Productivity Characterisation Through Machine Learning.

Advances in remote sensing combined with the emergence of sophisticated methods for large-scale data analytics from the field of data science provide new methods to model complex interactions in biological systems. Using a data-driven philosophy, insights from experts are used to corroborate the results generated through analytical models instead of leading the model design. Following such an approach, this study outlines the development and implementation of a whole-of-forest phenotyping system that incorporates spatial estimates of productivity across a large plantation forest. In large-scale plantation forestry, improving the productivity and consistency of future forests is an important but challenging goal due to the multiple interactions between biotic and abiotic factors, the long breeding cycle, and the high variability of growing conditions. Forest phenotypic expression is highly affected by the interaction of environmental conditions and forest management but the understanding of this complex dynamics is incomplete. In this study, we collected an extensive set of 2.7 million observations composed of 62 variables describing climate, forest management, tree genetics, and fine-scale terrain information extracted from environmental surfaces, management records, and remotely sensed data. Using three machine learning methods, we compared models of forest productivity and evaluate the gain and Shapley values for interpreting the influence of categorical variables on the power of these methods to predict forest productivity at a landscape level. The most accurate model identified that the most important drivers of productivity were, in order of importance, genetics, environmental conditions, leaf area index, topology, and soil properties, thus describing the complex interactions of the forest. This approach demonstrates that new methods in remote sensing and data science enable powerful, landscape-level understanding of forest productivity. The phenotyping method developed here can be used to identify superior and inferior genotypes and estimate a productivity index for individual site. This approach can improve tree breeding and deployment of the right genetics to the right site in order to increase the overall productivity across planted forests.

Genotype-by-environment interaction in coast redwood outside natural distribution - search for environmental cues.

BACKGROUND: Effective matching of genotypes and environments is required for the species to reach optimal productivity and act effectively for carbon sequestration. A common garden experiment across five different environments was undertaken to assess genotype x environment interaction (GxE) of coast redwood in order to understand the performance of genotypes across environments. RESULTS: The quantitative genetic analysis discovered no GxE between investigated environments for diameter at breast height (DBH). However, no genetic component was detected at one environment possibly due to stressful conditions. The implementation of universal response function allowed for the identification of important environmental factors affecting species productivity. Additionally, this approach enabled us to predict the performance of species across the New Zealand environmental conditions. CONCLUSIONS: In combination with quantitative genetic analysis which identified genetically superior material, the URF model can directly identify the optimal geographical regions to maximize productivity. However, the finding of ideally uncorrelated climatic variables for species with narrow ecological amplitude is rather challenging, which complicates construction of informative URF model. This, along with a small number of tested environments, tended to overfit a prediction model which resulted in extreme predictions in untested environments.

Spatial Models With Inter-Tree Competition From Airborne Laser Scanning Improve Estimates of Genetic Variance.

Phenotyping individual trees to quantify interactions among genotype, environment, and management practices is critical to the development of precision forestry and to maximize the opportunity of improved tree breeds. In this study we utilized airborne laser scanning (ALS) data to detect and characterize individual trees in order to generate tree-level phenotypes and tree-to-tree competition metrics. To examine our ability to account for environmental variation and its relative importance on individual-tree traits, we investigated the use of spatial models using ALS-derived competition metrics and conventional autoregressive spatial techniques. Models utilizing competition covariate terms were found to quantify previously unexplained phenotypic variation compared with standard models, substantially reducing residual variance and improving estimates of heritabilities for a set of operationally relevant traits. Models including terms for spatial autocorrelation and competition performed the best and were labelled ACE (autocorrelation-competition-error) models. The best ACE models provided statistically significant reductions in residuals ranging from -65.48% for tree height (H) to -21.03% for wood stiffness (A), and improvements in narrow sense heritabilities from 38.64% for H to 14.01% for A. Individual tree phenotyping using an ACE approach is therefore recommended for analyses of research trials where traits are susceptible to spatial effects.

Genomic selection for non-key traits in radiata pine when the documented pedigree is corrected using DNA marker information.

BACKGROUND: Non-key traits (NKTs) in radiata pine (Pinus radiata D. Don) refer to traits other than growth, wood density and stiffness, but still of interest to breeders. Branch-cluster frequency, stem straightness, external resin bleeding and internal checking are examples of such traits and are targeted for improvement in radiata pine research programmes. Genomic selection can be conducted before the performance of selection candidates is available so that generation intervals can be reduced. Radiata pine is a species with a long generation interval, which if reduced could significantly increase genetic gain per unit of time. The aim of this study was to evaluate the accuracy and predictive ability of genomic selection and its efficiency over traditional forward selection in radiata pine for the following NKTs: branch-cluster frequency, stem straightness, internal checking, and external resin bleeding. RESULTS: Nine hundred and eighty-eight individuals were genotyped using exome capture genotyping by sequencing (GBS) and 67,168 single nucleotide polymorphisms (SNPs) used to develop genomic estimated breeding values (GEBVs) with genomic best linear unbiased prediction (GBLUP). The documented pedigree was corrected using a subset of 704 SNPs. The percentage of trio parentage confirmed was about 49% and about 50% of parents were re-assigned. The accuracy of GEBVs was 0.55-0.75 when using the documented pedigree and 0.61-0.80 when using the SNP-corrected pedigree. A higher percentage of additive genetic variance was explained and a higher predictive ability was observed when using the SNP-corrected pedigree than using the documented pedigree. With the documented pedigree, genomic selection was similar to traditional forward selection when assuming a generation interval of 17 years, but worse than traditional forward selection when assuming a generation interval of 14 years. After the pedigree was corrected, genomic selection led to 37-115% and 13-77% additional genetic gain over traditional forward selection when generation intervals of 17 years and 14 years were assumed, respectively. CONCLUSION: It was concluded that genomic selection with a pedigree corrected by SNP information was an efficient way of improving non-key traits in radiata pine breeding.

Modelling of population structure through contemporary groups in genetic evaluation.

BACKGROUND: Forest trees can occupy extensive geography and environmentally highly variable areas which result in high genetic variability in the direction of pressure from natural selection. At the same time, the majority of conifer species are wind-pollinated from both short and long distances, resulting in wide-spread gene flow, which can lead to maladaptation to local conditions. Quantitative analyses of provenance/progeny tests correct for genetic differences between populations to ensure unbiased genetic parameters are obtained. Commonly, the provenance effect is fitted as a fixed term or can be implemented as a contemporary group in the pedigree. RESULTS: The use of a provenance effect, either as a fixed term or as the same contemporary groups in both maternal and paternal sides of the pedigree, resulted in fairly similar precision of genetic parameters in our case. However, when we developed a phantom contemporary group for the paternal side of the pedigree that considered a different genetic quality of pollen compared with the maternal contribution from trees in the local environment, the model fit and accuracy of breeding values increased. CONCLUSION: Consideration of the mating dynamics and the vector of gene flow are important factors in modelling contemporary genetic groups, particularly when implementing pedigrees within a mixed model framework to obtain unbiased estimates of genetic parameters. This approach is especially important in traits involved in local adaptation.

Expected benefit of genomic selection over forward selection in conifer breeding and deployment.

Genomic selection is a proven technology in animal and plant breeding to accelerate genetic gain, but as yet is to be fully realised in forest tree breeding. This paper examines, through stochastic simulation, the potential benefits of genomic selection (GS) over forward selection (FS) in a typical conifer breeding program. Methods of speeding the deployment of selected material were also considered, including top-grafting onto mature seed orchard ortets, using additional replicates of clones in archives for crossing, and embryogenesis and clonal propagation. Genetic gain per generation was found to increase considerably when the size of the training population was larger (800 c.f. 3000 clones), or when the heritability was higher (0.2 c.f. 0.5). The largest genetic gain, of 24% was achieved where large training populations (3000 clones) and high heritability traits (0.5) were combined. The accuracy of genomic breeding values (GEBVs) increased with the increase in the number of clones in the training population, the heritability of the trait and the density of the SNP markers. Calculated accuracies of simulated GEBVs and genetic gain per unit of time suggested that 2000 clones in the training population is the minimum size for effective genomic selection for conifers. Compared with forward selection, genomic selection with 2000 clones in the training population, and a 60K SNP panel, an increase of 1.58 mm per year in diameter-at-breast-height (DBH) and 2.44 kg/m3 per year for wood density can be expected. After one generation (9-years), this would be equivalent to 14.23 mm and 21.97 kg/m3 for DBH and wood density respectively. Deploying clones of the selected individuals always resulted in higher additional genetic gain than deploying progeny/seedlings. Deploying genetic material selected from genomic selection with top-grafting for early coning appeared to be the best option. Application of genomic selection to conifer breeding programs, combined with deployment tools such as top-grafting and embryogenesis are powerful tools to speed the delivery of genetic gain to the forest.

Effect of Hidden Relatedness on Single-Step Genetic Evaluation in an Advanced Open-Pollinated Breeding Program.

Open-pollinated (OP) mating is frequently used in forest tree breeding due to the relative temporal and financial efficiency of the approach. The trade-off is the lower precision of the estimated genetic parameters. Pedigree/sib-ship reconstruction has been proven as a tool to correct and complete pedigree information and to improve the precision of genetic parameter estimates. Our study analyzed an advanced generation Eucalyptus population from an OP breeding program using single-step genetic evaluation. The relationship matrix inferred from sib-ship reconstruction was used to rescale the marker-based relationship matrix (G matrix). This was compared with a second scenario that used rescaling based on the documented pedigree. The proposed single-step model performed better with respect to both model fit and the theoretical accuracy of breeding values. We found that the prediction accuracy was superior when using the pedigree information only when compared with using a combination of the pedigree and genomic information. This pattern appeared to be mainly a result of accumulated unrecognized relatedness over several breeding cycles, resulting in breeding values being shrunk toward the population mean. Using biased, pedigree-based breeding values as the base with which to correlate predicted GEBVs, resulted in the underestimation of prediction accuracies. Using breeding values estimated on the basis of sib-ship reconstruction resulted in increased prediction accuracies of the genotyped individuals. Therefore, selection of the correct base for estimation of prediction accuracy is critical. The beneficial impact of sib-ship reconstruction using G matrix rescaling was profound, especially in traits with inbreeding depression, such as stem diameter.

Genotype by environment interaction for growth and Dothistroma resistance and clonal connectivity between environments in radiata pine in New Zealand and Australia.

Twenty-eight clonal trials of radiata pine planted across Australia and New Zealand were used to investigate genetic variation and genotype by environment (G×E) interaction for diameter-at-breast-height (DBH), height and Dothistroma resistance (DO_R). The average narrow-sense heritabilities were 0.11, 0.21 and 0.30 while the average broad-sense heritabilities were 0.27, 0.34 and 0.40 for DBH, height and Dothistroma resistance, respectively. Dothistroma resistance was assessed as the percentage of needles that were not affected by Dothistroma needle blight. G×E interactions were analysed using an approximate reduced factor analytic model. Apparent G×E interactions were estimated for DBH, height and Dothistroma resistance. Estimates of G×E interactions and their standard errors were strongly influenced by the level of connectivity between trials, in terms of common clones and common parents. When there was sufficient connectivity between trials (more than 30% common clones between trials), a high level of G×E interaction was found for DBH and height but not for Dothistroma resistance. In two simulated clonal trials planted in two environments, low connectivity between environments resulted in a lower estimated genetic correlation between environments with an increased standard error. These results suggest that the number of clones in common between clonal trials is a key factor for inclusion in future experimental designs for estimating G×E interaction. When designing clonal trials for use in multiple environments for accurately estimating the level of G×E, if the resource for creating connectivity between environments is limited, at least 30% of the clones need to be in common between environments.

Phenotyping Whole Forests Will Help to Track Genetic Performance.

Phenotyping is the accurate and precise physical description of organisms. Accurate and quantitative phenotyping underpins the delivery of benefits from genetic improvement programs in agriculture. In forest trees, phenotyping at an equivalent precision has been impossible because trees and forests are large, long-lived, and highly variable. These facts have restricted the delivery of genetic gains in forestry compared to other agricultural sectors. We describe a landscape-scale phenotyping platform that integrates remote sensing, spatial information systems, and genomics to facilitate the delivery of greater gains enabling forestry to catch up with other sectors. Combining remote sensing at a range of spatial and temporal scales with genomics will ultimately impact on tree breeding globally.

Parentage Reconstruction in Eucalyptus nitens Using SNPs and Microsatellite Markers: A Comparative Analysis of Marker Data Power and Robustness.

Pedigree reconstruction using molecular markers enables efficient management of inbreeding in open-pollinated breeding strategies, replacing expensive and time-consuming controlled pollination. This is particularly useful in preferentially outcrossed, insect pollinated Eucalypts known to suffer considerable inbreeding depression from related matings. A single nucleotide polymorphism (SNP) marker panel consisting of 106 markers was selected for pedigree reconstruction from the recently developed high-density Eucalyptus Infinium SNP chip (EuCHIP60K). The performance of this SNP panel for pedigree reconstruction in open-pollinated progenies of two Eucalyptus nitens seed orchards was compared with that of two microsatellite panels with 13 and 16 markers respectively. The SNP marker panel out-performed one of the microsatellite panels in the resolution power to reconstruct pedigrees and out-performed both panels with respect to data quality. Parentage of all but one offspring in each clonal seed orchard was correctly matched to the expected seed parent using the SNP marker panel, whereas parentage assignment to less than a third of the expected seed parents were supported using the 13-microsatellite panel. The 16-microsatellite panel supported all but one of the recorded seed parents, one better than the SNP panel, although there was still a considerable level of missing and inconsistent data. SNP marker data was considerably superior to microsatellite data in accuracy, reproducibility and robustness. Although microsatellites and SNPs data provide equivalent resolution for pedigree reconstruction, microsatellite analysis requires more time and experience to deal with the uncertainties of allele calling and faces challenges for data transferability across labs and over time. While microsatellite analysis will continue to be useful for some breeding tasks due to the high information content, existing infrastructure and low operating costs, the multi-species SNP resource available with the EuCHIP60k, opens a whole new array of opportunities for high-throughput, genome-wide or targeted genotyping in species of Eucalyptus.