Super-Poissonian Light Statistics from Individual Silicon Vacancy Centers Coupled to a Laser-Written Diamond Waveguide.

Modifying light fields at the single-photon level is a key challenge for upcoming quantum technologies and can be realized in a scalable manner through integrated quantum photonics. Laser-written diamond photonics offers 3D fabrication capabilities and large mode-field diameters matched to fiber optic technology, though limiting the cooperativity at the single-emitter level. To realize large coupling efficiencies, we combine excitation of single shallow-implanted silicon vacancy centers via high numerical aperture optics with detection assisted by laser-written type-II waveguides. We demonstrate single-emitter extinction measurements with a cooperativity of 0.0050 and a relative beta factor of 13%. The transmission of resonant photons reveals single-photon subtraction from a quasi-coherent field resulting in super-Poissonian light statistics. Our architecture enables light field engineering in an integrated design on the single quantum level although the intrinsic cooperativity is low. Laser-written structures can be fabricated in three dimensions and with a natural connectivity to optical fiber arrays.

Morphological Study of Nanostructures Induced by Direct Femtosecond Laser Ablation on Diamond.

High spatial frequency laser induced periodic surface structure (HSFL) morphology induced by femtosecond laser with 230 fs pulse duration, 250 kHz repetition rate at 1030 nm wavelength on CVD diamond surface is investigated and discussed. The spatial modification was characterized and analyzed by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and 2D-Fast Fourier Transform (2D-FFT). We studied the effect of pulse number and laser power on the spatial development of nanostructures, and also deduced the impact of thermal accumulation effect on their morphology. A generalized plasmonic model has been used to follow the optical evolution of the irradiated surface and to determine the periodic value of the nanostructures. We suggest that non-thermal melting and plasmonic excitation are the main processes responsible for the formation of HSFL-type nanostructures.

Micro-Hole Generation by High-Energy Pulsed Bessel Beams in Different Transparent Materials.

Micro-drilling transparent dielectric materials by using non-diffracting beams impinging orthogonally to the sample can be performed without scanning the beam position along the sample thickness. In this work, the laser micromachining process, based on the combination of picosecond pulsed Bessel beams with the trepanning technique, is applied to different transparent materials. We show the possibility to create through-apertures with diameter on the order of tens of micrometers, on dielectric samples with different thermal and mechanical characteristics as well as different thicknesses ranging from two hundred to five hundred micrometers. Advantages and drawbacks of the application of this technique to different materials such as glass, polymer, or diamond are highlighted by analyzing the features, the morphology, and the aspect-ratio of the through-holes generated. Alternative Bessel beam drilling configurations, and the possibility of optimization of the quality of the aperture at the output sample/air interface is also discussed in the case of glass.

Laser-Inscribed Diamond Waveguide Resonantly Coupled to Diamond Microsphere.

An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve stress-induced waveguiding. Transverse electrically and transverse magnetically polarized light from a tunable laser operating in the near-infrared region was injected into the diamond waveguide, which when coupled to the diamond microsphere showed whispering-gallery modes with a spacing of 0.33 nm and high-quality factors of 105. By carefully engineering these high-quality factor resonances, and further exploiting the properties of existing nitrogen-vacancy centers in diamond microspheres and diamond waveguides in such configurations, it should be possible to realize filtering, sensing and nonlinear optical applications in integrated diamond photonics.

Laser surface structuring of diamond with ultrashort Bessel beams.

We investigate the effect of ultrafast laser surface machining on a monocrystalline synthetic diamond sample by means of pulsed Bessel beams. We discuss the differences of the trench-like microstructures generated in various experimental conditions, by varying the beam cone angle, the energy and pulse duration, and we present a brief comparison of the results with those obtained with the same technique on a sapphire sample. In diamond, we obtain V-shaped trenches whose surface width varies with the cone angle, and which are featured by micrometer sized channels having depths in the range of 10-20 µm. By laser writing crossed trenches we are also able to create and tailor on the diamond surface pillar-like or tip-like microstructures potentially interesting for large surface functionalization, cells capturing and biosensing.

Optical NP problem solver on laser-written waveguide platform.

Cognitive photonic networks are researched to efficiently solve computationally hard problems. Flexible fabrication techniques for the implementation of such networks into compact and scalable chips are desirable for the study of new optical computing schemes and algorithm optimization. Here we demonstrate a femtosecond laser-written optical oracle based on cascaded directional couplers in glass, for the solution of the Hamiltonian path problem. By interrogating the integrated photonic chip with ultrashort laser pulses, we were able to distinguish the different paths traveled by light pulses, and thus infer the existence or the absence of the Hamiltonian path in the network by using an optical correlator. This work proves that graph theory problems may be easily implemented in integrated photonic networks, down scaling the net size and speeding up execution times.

Laser-Inscribed Glass Microfluidic Device for Non-Mixing Flow of Miscible Solvents.

In recent years, there has been significant research on integrated microfluidic devices. Microfluidics offer an advantageous platform for the parallel laminar flow of adjacent solvents of potential use in modern chemistry and biology. To reach that aim, we worked towards the realization of a buried microfluidic Lab-on-a-Chip which enables the separation of the two components by exploiting the non-mixing properties of laminar flow. To fabricate the aforementioned chip, we employed a femtosecond laser irradiation technique followed by chemical etching. To optimize the configuration of the chip, several geometrical and structural parameters were taken into account. The diffusive mass transfer between the two fluids was estimated and the optimal chip configuration for low diffusion rate of the components was defined.

Optical realization of the dissipative quantum oscillator.

An optical realization of the damped quantum oscillator, based on transverse light dynamics in an optical resonator with slowly-moving mirrors, is theoretically suggested. The optical resonator setting provides a simple implementation of the time-dependent Caldirola-Kanai Hamiltonian of the dissipative quantum oscillator and enables the visualization of the effects of damped oscillations in the classical (ray optics) limit and wave packet collapse in the quantum (wave optics) regime.

Three-dimensional structural niches engineered via two-photon laser polymerization promote stem cell homing.

A strategy to modulate the behavior of stem cells in culture is to mimic structural aspects of the native cell/extracellular matrix interaction. We applied femtosecond laser two-photon polymerization (2PP) to fabricate three-dimensional (3-D) microscaffolds, or "niches", using a hybrid organic-inorganic photoresist called SZ2080. The niches, of sizes fitting in a volume of 100×100×100 µm(3), were made by an external containment grid of horizontal parallel elements and by an internal 3-D lattice. We developed two niche heights, 20 and 80-100 µm, and four lattice pore dimensions (10, 20, 30 µm and graded). We used primary rat mesenchymal stem cells (MSCs) to study cell viability, migration and proliferation in the niches, up to 6 culture days. MSCs preferentially stayed on/in the structures once they ran into them through random migration from the surrounding flat surface, invaded those with a lattice pore dimension greater than 10 µm, and adhered to the internal lattice while the cell nuclei acquired a roundish morphology. In the niches, the highest MSC density was found in those areas where proliferation was observed, corresponding to the regions where the scaffold surface density available for cell adhesion was highest. The microgeometry inducing the highest cell density was 20 µm high with graded pores, in which cell invasion was favored in the central region of large porosity and cell adhesion was favored in the lateral regions of high scaffold surface density. Cell density in the niches, 17±6 cells/(100×100 µm(2)), did not significantly differ from that of the flat surface colonies. This implies that MSCs spontaneously homed and established colonies within the 3-D niches. This study brings to light the crucial role played by the niche 3-D geometry on MSC colonization in culture, with potential implications for the design of biomaterial scaffolds for synthetic niche engineering.

A new perfluoropolyether-based hydrophobic and chemically resistant photoresist structured by two-photon polymerization.

Two-photon polymerization technology has been used to fabricate submicrometer three-dimensional (3D) structures using a new polyfunctional perfluoropolyether-based resist, which is a polymer intrinsically hydrophobic and chemically resistant. The fluorinated resist was designed and synthesized in this work and successfully employed to fabricate woodpile structures in various experimental conditions. This is the first demonstration of the capability to fabricate hydrophobic and chemically resistant 3D structures with submicrometer resolution and arbitrary geometry.

Femtosecond laser microstructuring for polymeric lab-on-chips.

This paper provides an overview of femtosecond laser microfabrication in polymeric materials, with emphasis on lab-on-chip applications. Due to the nonlinear interaction of femtosecond laser pulses with polymers, laser-induced modifications are localized to the focal volume, enabling high resolution patterning in 3D. Femtosecond laser microfabrication offers unmatched versatility in fabricating surface microchannels and diffractive optics by means of laser ablation, buried optical waveguides and micro-optics through refractive index modification and complex 3D microstructures in photoresists by two-photon polymerization. Femtosecond laser microfabrication technology opens the door to fabricating integrated lab-on-chip devices with a single tool.

Two-photon laser polymerization: from fundamentals to biomedical application in tissue engineering and regenerative medicine.

Three-dimensional material microstructuring by femtosecond laser-induced two-photon polymerization is emerging as an important tool in biomedicine. During two-photon polymerization, a tightly focused femtosecond laser pulse induces a crosslinking photoreaction in the polymer confined within the focal volume. As a rapid-prototyping technique, two-photon polymerization enables the fabrication of truly arbitrary three-dimensional micro- and nano-structures directly from computer models, with a spatial resolution down to 100 nm. In this review, we discuss the fundamentals, experimental methods, and materials used for two-photon polymerization; in addition, we present some applications of this technology related to microfluidics and to biomaterial scaffolds for tissue engineering and regenerative medicine.

Integrated three-dimensional filter separates nanoscale from microscale elements in a microfluidic chip.

We report on the integration of a size-based three-dimensional filter, with micrometre-sized pores, in a commercial microfluidic chip. The filter is fabricated inside an already sealed microfluidic channel using the unique capabilities of two-photon polymerization. This direct-write technique enables integration of the filter by post-processing in a chip that has been fabricated by standard technologies. The filter is located at the intersection of two channels in order to control the amount of flow passing through the filter. Tests with a suspension of 3 µm polystyrene spheres in a Rhodamine 6G solution show that 100% of the spheres are stopped, while the fluorescent molecules are transmitted through the filter. We demonstrate operation up to a period of 25 minutes without any evidence of clogging. Preliminary validation of the device for plasma separation from whole blood is shown. Moreover, the filter can be cleaned and reused by reversing the flow.

Fabrication of binary Fresnel lenses in PMMA by femtosecond laser surface ablation.

We report on the fabrication of binary Fresnel lenses by femtosecond laser surface ablation of poly(methyl methacrylate) (PMMA) substrates. Tight focusing of the laser pulses produced a minimum ablated feature size of 600 nm, enabling the creation of lenses with numerical apertures as high as 0.5 and focal lengths ranging from 500 µm to 5 mm. A precise control of the ablation depth allowed the achievement of a 30% focusing efficiency, close to the maximum theoretical value for this kind of lenses.

High-fidelity solvent-resistant replica molding of hydrophobic polymer surfaces produced by femtosecond laser nanofabrication.

We demonstrate that hydrophobic areas formed by femtosecond laser irradiation on poly(methyl methacrylate) (PMMA) and polystyrene (PS) polymer substrates can be faithfully replicated on samples of the same material via a solvent-resistant perfluoropolyether (PFPE) elastomer mold. The replicated PMMA and PS samples show nearly identical micro-nanoscale topography and hydrophobic wetting characteristics as the laser-patterned master substrates. This work combines the femtosecond laser capability of spatially tailoring the wettability with a high-resolution parallel replication method, offering the potential for the efficient production of microfluidic devices with selectively tailored flow behavior.

Surface properties of femtosecond laser ablated PMMA.

The effects of femtosecond laser ablation on the physical and chemical properties at the surface of poly methylmethacrylate (PMMA) were studied. Femtosecond laser microfabrication caused the initially wetting behavior of PMMA to become nonwetting, mainly because of the laser-induced surface porosity at the submicroscale. Static and dynamic contact angle measurements along with morphological characterization revealed that after the laser irradiation, the system lies in an intermediate regime between those theorized by Wenzel and Cassie-Baxter. Spectroscopic analysis did not evidence any significant variation in the chemical properties of the processed polymeric surfaces.

Three-dimensional optical sensing network written in fused silica glass with femtosecond laser.

A single-step fast-writing method of burst ultrafast laser modification was applied to form a mesh network of multi-wavelength Bragg grating waveguides in bulk fused silica glass. Strain-optic and thermo-optic responses of the laser-written internal sensors are reported for the first time. A dual planar layout provided independent temperature- and strain-compensated characterization of temperature and strain distribution with coarse spatial resolution. The grating responses were thermally stable to 500 masculineC. To our best knowledge, the grating network represents the first demonstration of 3D distributed optical sensing network in a bulk transparent medium. Such 3D grating networks open new directions for strain and temperature sensing in optical circuits, optofluidic, MEMS or lab-on-a-chip microsystems, actuators, and windows and other large display or civil structures.

Broadband directional couplers fabricated in bulk glass with high repetition rate femtosecond laser pulses.

A femtosecond fiber laser was applied to fabricate broadband directional couplers inside bulk glass for general power splitting application in the 1250 to 1650-nm wavelength telecom spectrum. The broadband response was optimized over the 400-nm bandwidth by tailoring the coupling strength and the waveguide interaction length to balance the differing wavelength dependence of the straight interaction and bent transition regions. High spatial finesse of the femtosecond-laser writing technique enabled close placement (approxiamtely 6 microm) of adjacent waveguides that underpinned the wavelength-flattened broadband response at any coupling ratio in the 0% to 100% range. The spectral responses were well-represented by coupled mode theory, permitting simple design and implementation of broadband couplers for bulk 3D optical circuit integration.

Transition from thermal diffusion to heat accumulation in high repetition rate femtosecond laser writing of buried optical waveguides.

A variable (0.2 to 5 MHz) repetition rate femtosecond laser was applied to delineate the role of thermal diffusion and heat accumulation effects in forming low-loss optical waveguides in borosilicate glass across a broad range of laser exposure conditions. For the first time, a smooth transition from diffusion-only transport at 200 kHz repetition rate to strong heat accumulation effects at 0.5 to 2 MHz was observed and shown to drive significant variations in waveguide morphology, with rapidly increasing waveguide diameter that accurately followed a simple thermal diffusion model over all exposure variables tested. Amongst these strong thermal trends, a common exposure window of 200 mW average power and approximately 15-mm/s scan speed was discovered across the range of 200 kHz to 2 MHz repetition rates for minimizing insertion loss despite a 10-fold drop in laser pulse energy. Waveguide morphology and thermal modeling indicate that strong thermal diffusion effects at 200 kHz give way to a weak heat accumulation effect at approximately 1 microJ pulse energy for generating low loss waveguides, while stronger heat accumulation effects above 1-MHz repetition rate offered overall superior guiding. A comprehensive characterization of waveguide properties is presented for laser writing in the thermal diffusion and heat accumulation regimes. The waveguides are shown to be thermally stable up to 800 degrees C and can be written in a convenient 520 microm depth range with low spherical aberration.

Low-loss waveguides fabricated in BK7 glass by high repetition rate femtosecond fiber laser.

For the first time femtosecond-laser writing has inscribed low-loss optical waveguides in Schott BK7 glass, a commercially important type of borosilicate widely used in optical applications. The use of a variable repetition rate laser enabled the identification of a narrow processing window at 1 MHz repetition rate with optimal waveguides exhibiting propagation losses of 0.3 dB/cm and efficient mode matching to standard optical fibers at a 1550 nm wavelength. The waveguides were characterized by complementary phase contrast and optical transmission microscopy, identifying a micrometer-sized guiding region within a larger complex structure of both positive and negative refractive index variations.