Pseudohalide-Based Ionic Liquids: Advancing Crystallization Kinetics and Optoelectronic Properties in All-Inorganic Perovskite Solar Cells.

This study delves into the innovative approach of enhancing the efficiency and stability of all-inorganic perovskite solar cells (I-PSCs) through the strategic incorporation of thiocyanate (SCN-) ions via pseudohalide-based ionic liquid (IL) configurations. This straightforward methodology has exhibited captivating advancements in the kinetics of crystallization as well as the optoelectronic characteristics of the resulting perovskite films. These developments hold the promise of enhancing not only the quality and uniformity of the films but also aspects such as band alignment and the efficacy of charge transfer mechanisms. Calculation results corroborate that the incorporation of 1-butyl-3-methylimidazolium thiocyanate (BmimSCN) led to a significant redistribution of electron state density and enhanced electron-donating properties, indicating a substantial electron transfer between the perovskite material and the IL. Notably, the engineered devices demonstrate a remarkable efficiency surpassing 15%, a substantial enhancement attributed to the synergistic effects of the SCN- ion. Additionally, this approach offers inherent stability benefits, thereby addressing a significant challenge in I-PSC technology. This IL maintains >90% of the initial efficiency after 600 h, while the control device decreased to <20% of its initial value after only 100 h. 1-butyl-3-methylimidazolium iodide (BmimI) is also employed to further investigate the effects of SCN- ions on device performance.

Eco-Friendly Boost for Perovskite Photovoltaics: Harnessing Cellulose-Modified SnO2 as a High-Performance Electron Transporting Material.

In this study, a passivated tin oxide (SnO2) film is successfully obtained through the implementation of sodium carboxymethyl cellulose (Na-CMC) modifier agent and used as the electron transporting layer (ETL) within the assembly of perovskite solar cells (PSCs). The strategic incorporation of the Na-CMC modifier agent yields discernible enhancements in the optoelectronic properties of the ETL. Among the fabricated cells, the champion cell based on Na-CMC-complexed SnO2 ETL achieves a conversion efficiency of 22.2% with an open-circuit voltage (VOC) of 1.12 V, short-circuit current density (JSC) of 24.57 mA/cm2, and fill factor (FF) of 80.6%. On the other hand, these values are measured for the pristine SnO2 ETL-based control cell as VOC = 1.11 V, JSC = 23.59 mA/cm2, and FF = 76.7% with an efficiency of 20.1%. This improvement can be ascribed to the high charge extraction ability, higher optical transmittance, better conductivity, and decrease in the trap state density associated with the passivated ETL structure. In addition, the cells employing Na-CMC-complexed SnO2 ETL exhibit prolonged stability under ambient conditions during 2000 h. Based on the preliminary results, this study also presents a set of findings that could have substantial implications for the potential use of the Na-CMC molecule in both large-scale perovskite cells and perovskite/Si tandem configuration.