Rapid loss of estrogenicity of steroid estrogens by UVA photolysis and photocatalysis over an immobilised titanium dioxide catalyst.

The presence of low levels of natural and synthetic steroid estrogens in the aquatic environment, and their biological effects on aquatic organisms, are presently issues of concern. In this study, we investigated the temporal removal of estrogenic activity of several potent and environmentally relevant steroid estrogens by photocatalysis over an immobilised titanium dioxide (TiO2) catalyst. We used a recombinant yeast assay to measure estrogenic activity, which provided detection limits within the reactor of 53 ng/l for 17beta-estradiol and 17alpha-ethinylestradiol, and 100 ng/l for estrone. Pseudo-first-order kinetic data showed that photocatalysis over titanium dioxide was equally effective at removing the estrogenic activity of all three steroid substrates in aqueous solutions (initial concentrations of 10 microg/l) with a 50% reduction in estrogenicity within 10 min. In control experiments without TiO2 catalyst, the rate of UVA photolysis of the steroid substrates varied, but was most effective with 17alpha-ethinylestradiol followed by estrone, and was least effective with 17beta-estradiol (0.42, 0.2 and < 0.1 times the rate achieved with photocatalysis, respectively). The application of photocatalysis for the removal of steroid compounds within STW effluent released into the aquatic environment is discussed.

Composite carbon paste biosensor for phenolic derivatives based on in situ electrogenerated polypyrrole binder.

Amperometric biosensors based on new composite carbon paste (CPE) electrodes have been designed for the determination of phenolic compounds. The composite CPEs were prepared by in situ generation of polypyrrole (PPy) within a paste containing the enzyme polyphenol oxidase (PPO). The best paste composition (enzyme/pyrrole monomer/carbon particles/Nujol) was determined for a model enzyme, glucose oxidase, according to the enzymatic activity of the resulting electrodes and to the enzyme leakage from the paste during storage in phosphate buffer. The in situ electrogenerated PPy enables improvement in enzyme immobilization within the paste since practically no enzyme was lost in solution after 72 h of immersion. Moreover, the enzyme activity remains particularly stable under storage since the biocomposite structure maintains 80% of its activity after 1-month storage. Following the optimization of the paste composition, PPO-based carbon paste biosensors were prepared and presented excellent analytical properties toward catechol detection with a sensitivity of 4.7 A M(-1) cm(-2) and a response time lower than 20 s. The resulting biosensors were finally applied to the determination of epicatechin and ferulic acid as flavonol and polyphenol model, respectively.

A comparison of amperometric screen-printed, carbon electrodes and their application to the analysis of phenolic compounds present in beers.

In this paper a comparison between three commercially-available, screen-printable graphite inks for the construction of phenolic biosensors is made. The enzyme tyrosinase was immobilised within a polymer matrix and the substrate catechol was used to characterise the bio-electroanalytical response of each electrode. Biosensors fabricated from Gwent graphite inks exhibited the greatest sensitivity (5740 mA mol cm(-2)) compared to Dupont and Acheson graphite-based inks. This difference in sensitivity was attributed to a combination of a larger electroactive surface area, and thus a greater number of immobilised enzyme molecules. However, the dynamic range was considerably smaller (0.025-14 muM) indicating that the enzyme molecules were easily accessible to the substrate catechol. The surface properties of the biosensors were characterised using ac impedance, which indicated that the presence of the polymer on the electrode surface not only increased the charge-transfer kinetics of the three biosensors, but also increased the surface roughness of biosensors fabricated from Gwent inks. On the basis of these results Gwent graphite-based inks were used for analysis of phenolic compounds in lager beers by flow-injection analysis. The biosensor displayed favourable response characteristics, but cannot differentiate between the various phenolic compounds present in the samples. Nevertheless, the biosensor maybe suitable for indicating the phenolic status of beer or brew samples compared to time-consuming traditional methods, e.g. colorimetric or chromatographic methods.

Skin contact electrodes for medical applications.

Skin contact electrodes require electrolyte gels between the skin and the electrode in order to ensure good electrical contact. The effect of different types of electrolyte gel on skin impedance was studied. The main types of gels used were wet gels, karaya-gum based hydrogels and synthetic copolymer-based hydrogels [2-acrylamide-2-methylpropanesulfonic acid-N,N'-methylenebis(acrylamide) copolymers]. The effect of variation in gel composition on the impedance of the skin was investigated.