All optical operation of a superconducting photonic interface.

Quantum photonic processing via electro-optic components typically requires electronic links across different operation environments, especially when interfacing cryogenic components such as superconducting single photon detectors with room-temperature control and readout electronics. However, readout and driving electronics can introduce detrimental parasitic effects. Here we show an all-optical control and readout of a superconducting nanowire single photon detector (SNSPD), completely electrically decoupled from room temperature electronics. We provide the operation power for the superconducting detector via a cryogenic photodiode, and readout single photon detection signals via a cryogenic electro-optic modulator in the same cryostat. This method opens the possibility for control and readout of superconducting circuits, and feedforward for photonic quantum computing.

Demonstration of Hong-Ou-Mandel interference in an LNOI directional coupler.

Interference between single photons is key for many quantum optics experiments and applications in quantum technologies, such as quantum communication or computation. It is advantageous to operate the systems at telecommunication wavelengths and to integrate the setups for these applications in order to improve stability, compactness and scalability. A new promising material platform for integrated quantum optics is lithium niobate on insulator (LNOI). Here, we realise Hong-Ou-Mandel (HOM) interference between telecom photons from an engineered parametric down-conversion source in an LNOI directional coupler. The coupler has been designed and fabricated in house and provides close to perfect balanced beam splitting. We obtain a raw HOM visibility of (93.5 ± 0.7) %, limited mainly by the source performance and in good agreement with off-chip measurements. This lays the foundation for more sophisticated quantum experiments in LNOI.

Broadband optical Ta2O5 antennas for directional emission of light.

Highly directive antennas with the ability of shaping radiation patterns in desired directions are essential for efficient on-chip optical communication with reduced cross talk. In this paper, we design and optimize three distinct broadband traveling-wave tantalum pentoxide antennas exhibiting highly directional characteristics. Our antennas contain a director and reflector deposited on a glass substrate, which are excited by a dipole emitter placed in the feed gap between the two elements. Full-wave simulations in conjunction with global optimization provide structures with an enhanced linear directivity as high as 119 radiating in the substrate. The high directivity is a result of the interplay between two dominant TE modes and the leaky modes present in the antenna director. Furthermore, these low-loss dielectric antennas exhibit a near-unity radiation efficiency at the operational wavelength of 780 nm and maintain a broad bandwidth. Our numerical results are in good agreement with experimental measurements from the optimized antennas fabricated using a two-step electron-beam lithography, revealing the highly directive nature of our structures. We envision that our antenna designs can be conveniently adapted to other dielectric materials and prove instrumental for inter-chip optical communications and other on-chip applications.

Scalable Generation of Multiphoton Entangled States by Active Feed-Forward and Multiplexing.

Multiphoton entangled quantum states are key to advancing quantum technologies such as multiparty quantum communications, quantum sensing, or quantum computation. Their scalable generation, however, remains an experimental challenge. Current methods for generating these states rely on stitching together photons from probabilistic sources, and state generation rates drop exponentially in the number of photons. Here, we implement a system based on active feed-forward and multiplexing that addresses this challenge. We demonstrate the scalable generation of four-photon and six-photon Greenberger-Horne-Zeilinger states, increasing generation rates by factors of 9 and 35, respectively. This is consistent with the exponential enhancement compared to the standard nonmultiplexed approach that is predicted by our theory. These results facilitate the realization of practical multiphoton protocols for photonic quantum technologies.

Cryogenic electro-optic polarisation conversion in titanium in-diffused lithium niobate waveguides.

Many technologies in quantum photonics require cryogenic conditions to operate. However, the underlying platform behind active components such as switches, modulators and phase shifters must be compatible with these operating conditions. To address this, we demonstrate an electro-optic polarisation converter for 1550 nm light at 0.8 K in titanium in-diffused lithium niobate waveguides. To do so, we exploit the electro-optic properties of lithium niobate to convert between orthogonal polarisation modes with a fiber-to-fiber transmission >43%. We achieve a modulation depth of 23.6±3.3 dB and a conversion voltage-length product of 28.8 V cm. This enables the combination of cryogenic photonics and active components on a single integration platform.

Spatially single mode photon pair source at 800 nm in periodically poled Rubidium exchanged KTP waveguides.

Photon pair sources in the visible to NIR wavelength region play a key role in quantum optics. The wavelength range around 800 nm provides an opportunity for using low cost detectors, which makes it highly interesting for practical, large scale quantum applications. Here, we report on the realization of single mode Rubidium (Rb) exchanged waveguides in periodically poled (PP) Potassium Titanyl Phosphate (Rb:KTiOPO4 or Rb:KTP) for frequency-non-degenerate type II parametric down-conversion pumped at 400 nm and generating pairs of photons at around 800 nm. The source exhibits a nonlinear conversion efficiency of 2.0%/(Wcm2), estimated from SHG measurements. Characterisation of the generated two-photon state confirms nonclassical photon-number correlations, characterized by g(1,1). The high nonlinear conversion efficiency and low temperature sensitivity make this source a promising candidate for operations in both classical and quantum integrated network applications.

Characterisation of width-dependent diffusion dynamics in rubidium-exchanged KTP waveguides.

Integrated χ(2) devices are a widespread tool for the generation and manipulation of light fields, since they exhibit high efficiency, a small footprint and the ability to interface them with fibre networks. Surprisingly, some commonly used material substrates are not yet fully understood, in particular potassium titanyl phosphate (KTP). A thorough understanding of the fabrication process of waveguides in this material and analysis of their properties is crucial for the realization and the engineering of high efficiency devices for quantum applications. In this paper we present our studies on rubidium-exchanged waveguides fabricated in KTP. Employing energy dispersive X-ray spectroscopy (EDX), we analysed a set of waveguides fabricated with different production parameters in terms of time and temperature. We find that the waveguide depth is dependent on their widths by reconstructing the waveguide depth profiles. Narrower waveguides are deeper, contrary to the theoretical model usually employed. Moreover, we found that the variation of the penetration depth with the waveguide width is stronger at higher temperatures and times. We attribute this behaviour to stress-induced variation in the diffusion process.

Counter-propagating photon pair generation in a nonlinear waveguide.

Counter-propagating parametric conversion processes in non-linear bulk crystals have been shown to feature unique properties for efficient narrowband frequency conversion. In quantum optics, the generation of photon pairs with a counter-propagating parametric down-conversion process (PDC) in a waveguide, where signal and idler photons propagate in opposite directions, offers unique material-independent engineering capabilities. However, realizing counter-propagating PDC necessitates quasi-phase-matching (QPM) with extremely short poling periods. Here, we report on the generation of counter-propagating single-photon pairs in a self-made periodically poled lithium niobate waveguide with a poling period on the same order of magnitude as the generated wavelength. The single photons of the biphoton state bridge GHz and THz bandwidths with a separable joint temporal-spectral behavior. Furthermore, they allow the direct observation of the temporal envelope of heralded single photons with state-of-the art photon counters.

Nonlinear integrated quantum electro-optic circuits.

Future quantum computation and networks require scalable monolithic circuits, which incorporate various advanced functionalities on a single physical substrate. Although substantial progress for various applications has already been demonstrated on different platforms, the range of diversified manipulation of photonic states on demand on a single chip has remained limited, especially dynamic time management. Here, we demonstrate an electro-optic device, including photon pair generation, propagation, electro-optical path routing, as well as a voltage-controllable time delay of up to ~12 ps on a single Ti:LiNbO3 waveguide chip. As an example, we demonstrate Hong-Ou-Mandel interference with a visibility of more than 93 ± 1.8%. Our chip not only enables the deliberate manipulation of photonic states by rotating the polarization but also provides precise time control. Our experiment reveals that we have full flexible control over single-qubit operations by harnessing the complete potential of fast on-chip electro-optic modulation.

Periodically poled ridge waveguides in KTP for second harmonic generation in the UV regime.

Waveguide circuits play a key role in modern integrated optics and provide an appealing approach to scalability in quantum optics. We report on periodically poled ridge waveguides in z-cut potassium titanyl phosphate (KTiOPO4 or KTP), a material that has recently received growing interest due to its unique dispersion properties. Ridges were defined in surface-near rubidium-exchanged KTP by use of a precise diamond-blade dicing saw. We fabricated single-mode ridge waveguides at around 800 nm which exhibit widths of 1.9-3.2 µm and facilitated type-II second harmonic generation from 792 nm to 396 nm with high efficiency of 6.6 %/W·cm2. Temperature dependence of the second harmonic process was found to be 53 pm/K. The low temperature dependence and high nonlinear conversion efficiency make our waveguides ideally suited for future operations in classical nonlinear integrated optics and integrated quantum networking applications.

High-performance source of spectrally pure, polarization entangled photon pairs based on hybrid integrated-bulk optics.

Entangled photon pair sources based on bulk optics are approaching optimal design and implementation, with high state fidelities, spectral purities and heralding efficiencies, but generally low brightness. Integrated entanglement sources, while providing higher brightness and low-power operation, often sacrifice performance in output state quality and coupling efficiency. Here we present a polarization-entangled pair source based on a hybrid approach of waveguiding and bulk optics, addressing every metric simultaneously. We show 96 % fidelity to the singlet state, 82 % Hong-Ou-Mandel interference visibility, 43 % average Klyshko efficiency, and a high brightness of 2.9 × 106 pairs/(mode·s·mW), while requiring only microwatts of pump power.

Highly efficient frequency conversion with bandwidth compression of quantum light.

Hybrid quantum networks rely on efficient interfacing of dissimilar quantum nodes, as elements based on parametric downconversion sources, quantum dots, colour centres or atoms are fundamentally different in their frequencies and bandwidths. Although pulse manipulation has been demonstrated in very different systems, to date no interface exists that provides both an efficient bandwidth compression and a substantial frequency translation at the same time. Here we demonstrate an engineered sum-frequency-conversion process in lithium niobate that achieves both goals. We convert pure photons at telecom wavelengths to the visible range while compressing the bandwidth by a factor of 7.47 under preservation of non-classical photon-number statistics. We achieve internal conversion efficiencies of 61.5%, significantly outperforming spectral filtering for bandwidth compression. Our system thus makes the connection between previously incompatible quantum systems as a step towards usable quantum networks.