First look at RNA in L-configuration.

Nucleic acid molecules in the mirror image or L-configuration are unknown in nature and are extraordinarily resistant to biological degradation. The identification of functional L-oligonucleotides called Spiegelmers offers a novel approach for drug discovery based on RNA. The sequence r(CUGGGCGG).r(CCGCCUGG) was chosen as a model system for structural analysis of helices in the L-configuration as the structure of the D-form of this sequence has previously been determined in structural studies of 5S RNA domains, in particular domain E of the Thermus flavus 5S rRNA [Perbandt et al. (2001), Acta Cryst. D57, 219-224]. Unexpectedly, the results of crystallization trials showed little similarity between the D- and the L-forms of the duplex in either the crystallization hits or the diffraction performance. The crystal structure of this L-RNA duplex has been determined at 1.9 A resolution with R(work) and R(free) of 23.8 and 28.6%, respectively. The crystals belong to space group R32, with unit-cell parameters a = 45.7, c = 264.6 A. Although there are two molecules in the asymmetric unit rather than one, the structure of the L-form arranges helical pairs in a head-to-tail fashion to form pseudo-continuous infinite helices in the crystal as in the D-form. On the other hand, the wobble-like G.C(+) base pair seen in the D-RNA analogue does not appear in the L-RNA duplex, which forms a regular double-helical structure with typical Watson-Crick base pairing.

Crystallographic structures of the ligand-binding domains of the androgen receptor and its T877A mutant complexed with the natural agonist dihydrotestosterone.

The structures of the ligand-binding domains (LBD) of the wild-type androgen receptor (AR) and the T877A mutant corresponding to that in LNCaP cells, both bound to dihydrotestosterone, have been refined at 2.0 A resolution. In contrast to the homodimer seen in the retinoid-X receptor and estrogen receptor LBD structures, the AR LBD is monomeric, possibly because of the extended C terminus of AR, which lies in a groove at the dimerization interface. Binding of the natural ligand dihydrotestosterone by the mutant LBD involves interactions with the same residues as in the wild-type receptor, with the exception of the side chain of threonine 877, which is an alanine residue in the mutant. This structural difference in the binding pocket can explain the ability of the mutant AR found in LNCaP cells (T877A) to accommodate progesterone and other ligands that the wild-type receptor cannot.

Crystallization and preliminary X-ray analysis of CTLA-4 (CD152) membrane-external domain.

CTLA-4 (CD152) is involved in T-lymphocyte co-stimulatory pathways modulating both humoral and cellular immune response. The membrane-external domain has been prepared and crystallized. The unit-cell parameters are a = b = 43, c = 143 A with the symmetry of space group P3(1)21 or its enantiomer and the crystals diffract to 2. 7 A resolution at synchrotron beamlines.

Molecular, biological, and preliminary structural analysis of recombinant bryodin 1, a ribosome-inactivating protein from the plant Bryonia dioica.

Bryonia dioica (Cucurbitaceae family) produces at least two type I ribosome-inactivating proteins, bryodin 1 (BD1) and bryodin 2 (BD2). A cDNA sequence encoding BD1 was isolated from B. dioica leaf mRNA using degenerative oligonucleotides and codes for a 22 amino acid signal peptide followed by a protein of 267 residues. Expression of two recombinant BD1 (rBD1) forms in Escherichia coli yielded proteins of 267 (to the natural stop codon) and 247 amino acids (to the putative cleavage site yielding the mature protein) that had identical protein synthesis inhibition activity as compared to native BD1. The substitution of Lys for Glu at position 189 near the active site reduced the ability of rBD1 to inhibit protein synthesis by 10-fold. Toxicologic analysis showed that rBD1 was well tolerated in rodents with LD50 values of 40 mg/kg in mice and >25 mg/kg in rats. A crystal of mature rBD1 protein was used to collect X-ray diffraction data to 2.1 A resolution. The rBD1 crystal structure was solved and showed extensive homology with other type I RIPs and A chains of type II RIPs. The studies described here demonstrate that rBD1 retains full biologic activity and serve as a guide for using this potent, yet nontoxic, RIP in the construction of single-chain immunotoxin fusion proteins.

Kinetic and crystallographic studies of Escherichia coli UDP-N-acetylmuramate:L-alanine ligase.

Uridine diphosphate-N-acetylmuramate:L-alanine ligase (EC 6.3.2.8, UNAM:L-Ala ligase or MurC gene product) catalyzes the ATP-dependent ligation of the first amino acid to the sugar moiety of the peptidoglycan precursor. This is an essential step in cell wall biosynthesis for both gram-positive and gram-negative bacteria. Optimal assay conditions for initial velocity studies have been established. Steady-state assays were carried out to determine the effect of various parameters on enzyme activity. Factors studies included: cation specificity, ionic strength, buffer composition and pH. At 37 degrees C and pH 8.0, kcat was equal to 980 +/- 40 min-1, while K(m) values for ATP, UNAM, and L-alanine were, 130 +/- 10, 44 +/- 3, and 48 +/- 6 microM, respectively. Of the metals tested only Mn, Mg, and Co were able to support activity. Sodium chloride, potassium chloride, ammonium chloride, and ammonium sulfate had no effect on activity up to 75 mM levels. The enzyme, in appropriate buffer, was stable enough to be assayed over the pH range of 5.6 to 10.1. pH profiles of Vmax/K(m) for the three substrates and of Vmax were obtained. Crystallization experiments with the enzyme produced two crystal forms. One of these has been characterized by X-ray diffraction as monoclinic, space group C2, with cell dimensions a = 189.6, b = 92.1, c = 75.2 A, beta = 105 degrees, and two 54 kDa molecules per asymmetric unit. It was discovered that the enzyme will hydrolyze ATP in the absence of L-alanine. This L-alanine independent activity is dependent upon the concentrations of both ATP and UNAM; kcat for this activity is less than 4% of the biosynthetic activity measured in the presence of saturating levels of L-alanine. Numerous L-alanine analogs tested were shown to stimulate ATP hydrolysis. A number of these L-alanine analogs produced novel products as accessed by HPLC and mass spectral analysis. All of the L-alanine analogs tested as inhibitors were competitive versus L-alanine.

Crystallization and preliminary crystallographic analysis of E. coli uridine 5'-diphospho-N-acetylenolpyruvylglucosamine reductase in two new crystal forms.

Uridine 5'-diphospho-N-acetylenolpyruvylglucosamine reductase (MurB), the second enzyme in the peptidoglycan synthetic pathway of Escherichia coli, has been crystallized in two previously unreported forms, one orthorhombic and the other monoclinic. MurB (molecular mass 38 kDa) crystallizes in a range of conditions that utilize polyethylene glycol fractions as precipitants, and crystals can be grown with or without the enzyme's substrate, uridine 5'-diphospho-N-acetylenolpyruvylglucosamine. X-ray diffraction from crystals of the orthorhombic form extends to 2 A resolution and shows the symmetry and systematic absences of space group P2(1)2(1)2(1). These crystals show significant variations in cell dimensions at room temperature and at 100 K. A crystal used to collect a 2.0 A resolution data set at a synchrotron source showed cell dimensions at ca 100 K of a = 51.0, b = 79.3 and c = 87.1 A, indicating one molecule peroasymmetric unit. The monoclinic crystals scatter X-rays to 3.0 A resolution consistent with space group P2(1), unit-cell dimensions (ca 100 K) a = 50.7, b = 92.4, c = 85.5 A, and beta = 104 degrees, and two molecules per asymmetric unit. Mercury derivatives have been prepared with both orthorhombic and monoclinic forms, and efforts are underway to exploit these derivatives to determine the structure of this protein.

Crystallization of microsomal triglyceride transfer protein from bovine liver.

The microsomal triglyceride transfer protein (MTP) is a heterodimeric lipid transfer protein required for the assembly of plasma very low density lipoproteins in the liver and chylomicrons in the intestine. Bovine MTP was purified by a modification of a previously published procedure and crystals of MTP were grown reproducibly with polyethylene glycol as a precipitant at pH 7.0. MTP crystals, which diffract to Bragg spacings of better than 3.2 A, have the symmetry of space group P2(1)2(1)2(1) with refined lattice constants of a = 88.7, b = 100.9 and c = 201.1 A, with one heterodimer per asymmetric unit.

Crystallization and preliminary X-ray analysis of an anti-staphylococcal nuclease-staphylococcal nuclease complex and of a second anti-staphylococcal nuclease antibody.

The Fab fragments of several monoclonal antibodies that bind Staphylococcal nuclease have been screened for crystallization conditions. Two of these, N10 and N25, have been crystallized in forms suitable for X-ray structural analysis. The anti-Staphylococcal nuclease antibody complex N10 Fab-nuclease crystallizes with symmetry consistent with space group C2 and cell parameters of a = 234.7 A; b = 43.5 A; c = 74.4 A; beta = 106.4 degrees. A second anti-Staphylococcal nuclease antibody, N25, although crystallized starting with the Fab-nuclease complex, apparently crystallizes as uncomplexed N25 Fab with symmetry consistent with space group P3(1)21 (or its enantiomorph P3(2)21) and cell parameters of a = b = 80.9 A; c = 138.4 A.

Initial crystallographic analysis of a recombinant human interleukin-1 receptor antagonist protein.

We report the crystallization of samples of a recombinant preparation of human interleukin-1 receptor antagonist protein (IRAP) and solution of the crystal structure by isomorphous replacement methods. Crystals were obtained by the hanging-drop vapor-diffusion method at 277 K from solutions of PEG 4000 containing sodium chloride, dithiothreitol and PIPES [sodium piperazione-N,N'-bis(2-ethanesulfonate)] buffer at pH 7.0. Crystals appear within about a week and grow as truncated tetragonal bipyramids to 0.3-0.6 mm on an edge. X-ray diffraction data from these crystals specify space group P4(3)2(1)2 and unit-cell dimensions of a = b = 72.35(26), c = 114.7(8) A and Z = 16 (two molecules per asymmetric unit). Fresh crystals diffract to about 2.3 A resolution. The search for heavy-atom derivatives has produced two, potassium gold cyanide and trimethyl lead chloride, as same-site, single-site derivatives. Inspection of an electron-density map at 4 A resolution calculated with these derivatives confirms that the IRAP molecule is a member of the interleukin-1 structural family.

Crystallographic analyses of an active HIV-1 ribonuclease H domain show structural features that distinguish it from the inactive form.

. An active recombinant preparation of the carboxy-terminal ribonuclease H (RNase H) domain of HIV-I reverse transcriptase has produced crystals of several different forms, including a trigonal prism form (P3(1); a = b = 52.03, c = 113.9 A with two molecules per asymmetric unit) and a hexagonal tablet form (P6(2)22 or P6(4)22; a = b = 93.5, c = 74.1 A with one molecule per asymmetric unit). The former appears to be isomorphous with crystals of a similar, but inactive, version of the enzyme that was used for a prior crystal structure determination [Davies, Hostomska, Hostomsky, Jordan & Matthews (1991). Science, 252, 88-95]. We have also obtained a structure solution for this crystal form and have refined it with 2.8 A resolution data (R = 0.216). We report here details of our crystallization studies and some initial structural results that verify that the preparation of active HIV-1 RNase H yields a protein that is not just enzymatically, but also structurally, distinguishable from the inactive form. Evidence suggests that region 538-542, which may be involved in the catalytic site and which is disordered in both molecules in the prior structure determination, is ordered in the crystal structure of the active enzyme, although the ordering may include more than one conformation for this loop. It should also be noted that, in the crystal structure of the trigonal form, RNase H monomers associate to form noncrystallographic twofold-symmetric dimers by fusing five-stranded mixed beta sheets into a single ten-stranded dimerwide sheet, an assembly that was not remarked upon by previous investigators.

X-ray crystal structure of a pea lectin-trimannoside complex at 2.6 A resolution.

The x-ray crystal structure of pea lectin, in complex with a methyl glycoside of the N-linked-type oligosaccharide trimannosyl core, methyl 3,6-di-O-(alpha-D-mannopyranosyl)-alpha-D-mannopyranoside, has been solved by molecular replacement and refined at 2.6-A resolution. The R factor is 0.183 for all data in the 8.0 to 2.6 A resolution range with an average atomic temperature factor of 26.1 A2. Strong electron density for a single mannose residue is found in the monosaccharide-binding site suggesting that the trisaccharide binds primarily through one of the terminal alpha-linked mannose residues. The complex is stabilized by hydrogen bonds involving the protein residues Asp-81, Gly-99, Asn-125, Ala-217, and Glu-218, and the carbohydrate oxygen atoms O3, O4, O5, and O6. In addition, the carbohydrate makes van der Waals contacts with the protein, involving Phe-123 in particular. These interactions are very similar to those found in the monosaccharide complexes with concanavalin A and isolectin 1 of Lathyrus ochrus, confirming the structural relatedness of this family of proteins. Comparison of the pea lectin complex with the unliganded pea lectin and concanavalin A structures indicates differences in the conformation and water structure of the unliganded binding sites of these two proteins. Furthermore, a correlation between the position of the carbohydrate oxygen atoms in the complex and the bound water molecules in the unliganded binding sites is found. Binding of the trimannose core through a single terminal monosaccharide residue strongly argues that an additional fucose-binding site is responsible for the high affinity pea lectin-oligosaccharide interactions.

Purification and characterization of heterodimeric human immunodeficiency virus type 1 (HIV-1) reverse transcriptase produced by in vitro processing of p66 with recombinant HIV-1 protease.

Active recombinant reverse transcriptase (RT) of human immunodeficiency virus type 1 (HIV-1) with an amino-terminal extension containing a hexa-histidine sequence has been prepared in milligram quantities in a pure heterodimeric (p66/p51) form by coordinated applications of immobilized metal affinity chromatography (IMAC) and HIV-1 protease treatment. The precursor protein, isolated from extracts of recombinant Escherichia coli by IMAC in a predominantly unprocessed form (p66), migrated on sodium dodecyl sulfate-polyacrylamide gels as a 66-kDa band with minor heterogeneity at lower relative molecular mass. Incubation of this protein with recombinant HIV-1 protease produced a stable heterodimeric RT that was purified in a single step by IMAC. The purified protein retained both RT and RNase H activity, and kinetic parameters (Km and Vmax) were measured with both RNA-dependent DNA polymerization and RNase H activity assays. Carboxyl-terminal sequencing of purified heterodimeric RT indicated that one subunit is intact p66, whereas the other, p51, is a truncated form of p66 that terminates at residue Phe440. Analysis of the HIV-1 protease digest revealed two cleavage sites, at Tyr483-Leu484 and Tyr532-Leu533, in addition to the site at Phe440-Tyr441 that is cleaved to produce p51.

Resolution of microheterogeneity associated with recombinant HIV-1 heterodimeric reverse transcriptase.

HIV-1 reverse transcriptase (RT) has been successfully expressed as a biologically active recombinant protein in Escherichia coli and purified to homogeneity. After partial purification, RT was obtained primarily in a heterodimeric form represented by two subunits of 66 and 51 kDa, but the preparation also included several forms distinguishable in size and charge by chromatography on ionic-exchange and gel-filtration columns. We have developed a purification method that yields a single heterodimeric form of RT. Our strategy involves the selection of RT molecules exhibiting uniformity in elution from QAE Sepharose anion-exchange columns and Superose 12 gel-filtration columns. In the former, RT is resolved into multiple peaks on the basis of enzymatic activity, one of which represents highly active and pure p66:p51 heterodimeric RT. This highly active RT fraction, after gel-filtration chromatography, yields a compositionally pure protein product free of observable microheterogeneity by 1D and 2D polyacrylamide gel electrophoresis under a variety of conditions. Furthermore, the RNAse H enzymatic activity associated with HIV-1 RT has been demonstrated to coelute with the purified polymerase activity during gel filtration at a size (120 kDa) consistent with its location on the heterodimeric protein molecule.

Protein crystal growth aboard the U.S. space shuttle flights STS-31 and STS-32.

NASA: The first microgravity protein crystal growth experiments were performed on Spacelab I by Littke and John. These experiments indicated that the space grown crystals, which were obtained using a liquid-liquid diffusion system, were larger than crystals obtained by the same experimental system on earth. Subsequent experiments were performed by other investigators on a series of space shuttle missions from 1985 through 1990. The results from two of these shuttle flights (STS-26 and STS-29) have been described previously. The results from these missions indicated that the microgravity grown crystals for a number of different proteins were larger, displayed more uniform morphologies, and yielded diffraction data to significantly higher resolutions than the best crystals of these proteins grown on earth. This paper presents the results obtained from shuttle flight STS-32 (flown in January, 1990) and preliminary results from the most recent shuttle flight, STS-31 (flown in April, 1990).^ieng

The crystal structure of a lysine 49 phospholipase A2 from the venom of the cottonmouth snake at 2.0-A resolution.

The crystal structure of a lysine 49 variant phospholipase A2 (K49 PLA2) has been determined at 2.0-A resolution. This particular phospholipase A2, purified from the venom of the eastern cottonmouth (Agkistrodon piscivorus piscivorus), a North American pit viper, differs significantly from others studied crystallographically because of replacement of the aspartate residue at position 49, whose side chain is important in calcium binding, by lysine. The crystallographic analysis of K49 PLA2 was undertaken to assess the structural ramifications of this substitution, particularly as they affect the binding mechanism of both the calcium cofactor and the phospholipid substrate. The protein crystals are tetragonal, space group P4(1)2(1)2, with unit cell dimensions of a = b = 71.7 (1) and c = 57.8 (3) A. Preliminary phases were obtained by molecular replacement techniques with a search model derived from the refined 2.5-A structure of a rattle-snake venom phospholipase A2 (Brunie, S., Bolin, J., Gewirth, D., and Sigler, P. B. (1985) J. Biol. Chem. 260, 9742-9749). The starting model gave an initial crystallographic RF of 0.526 (RF = sigma parallel to Fo /-/ Fc parallel to /sigma/Fo/). The structure was refined against all data to 2.0-A resolution. The final RF is 0.158. The final model includes 150 discrete water molecules. The K49 PLA2 model is composed primarily of alpha-helices joined by loops, some of which are quite extensive. Although dissimilarities are observed in the loop regions, the helical portions are very similar to those in other known phospholipase A2 structures. The proposed catalytic center (His48, Tyr73, and Asp99) is also structurally conserved. The region in K49 PLA2 corresponding to the calcium-binding site in other phospholipases A2 is occupied by the epsilon-amino group of lysine 49.

Crystal structure of recombinant human interleukin-1 beta at 2.0 A resolution.

The crystal structure of recombinant human interleukin-1 beta (IL-1 beta) has been determined at 2.0 A resolution and refined to a crystallographic R-factor of 0.19. Three heavy-atom derivatives were identified and used for multiple isomorphous replacement phasing. Interpretation of the resulting electron density map revealed a structure in which there are 12 antiparallel beta-strands and no alpha-helix. The single 153-residue polypeptide chain is folded into a six-stranded beta-barrel similar in architecture to the Kunitz-type trypsin inhibitor found in soybeans. The molecule displays approximate 3-fold symmetry about the axis of the beta-barrel. Each successive pair of component strands of the barrel brackets an extensive sequence outside the barrel that includes an additional pair of beta-strands and a prominent loop. Together, these three external segments conceal much of the perimeter and one end of the barrel, leaving only the end supporting the chain termini fully exposed. The structure can be used to identify portions of the polypeptide chain that are exposed on the surface of the molecule, some of which must be epitopes recognized by interleukin-1 beta receptors.

Soybean trypsin inhibitor. An IL-1-like protein?

Soybean trypsin inhibitor (SBTI) shares some structural homology with interleukin-1 (IL-1) and was tested for IL-1 bioactivity. Human T-cells proliferated maximally when stimulated with PMA and SBTI but failed to respond to either stimulus alone. This response was abrogated by neutralizing antibodies to IL-1 beta but not to IL-1 alpha. However, immunoblots showed no cross-reactivity between SBTI and anti-IL-1 antibodies. Furthermore, SBTI did not bind to IL-1 receptors on YT cells and did not activate a murine T-lymphoma or human T-hybridoma. Supernantants from monocytes stimulated with SBTI contained significant levels of IL-1 activity. The data show that SBTI has no direct IL-1 activity but can stimulate T-cells indirectly through an IL-1 dependent mechanism.

The crystal structure of pea lectin at 3.0-A resolution.

The structure of pea lectin has been determined to 3.0-A resolution based on multiple isomorphous replacement phasing to 6.0-A resolution and a combination of single isomorphous replacement, anomalous scattering, and density modification to 3.0-A resolution. The pea lectin model has been optimized by restrained least squares refinement against the data between 7.0- and 3.0-A resolution. The final model at 3.0 A gives an R factor of 0.24 and a root mean square deviation from ideal bond distances of 0.02 A. The two monomers in the asymmetric unit are related by noncrystallographic 2-fold symmetry to form a dimer. Monomers were treated independently in modeling and refinement, but are found to be virtually identical at this resolution. The molecular structure of the pea lectin monomer is very similar to that of concanavalin A, the lectin from the jack bean. Similarities extend from secondary and tertiary structures to the occurrence of a cis-peptide bond and the pattern of coordination of the Ca2+ and Mn2+ ions. Differences between the two lectin structures are confined primarily to the loop regions and to the chain termini, which are different and give rise to the unusual permuted relationship between the pea lectin and concanavalin A protein sequences.

Model for calcium binding to gamma-carboxyglutamic acid residues of proteins: crystal structure of calcium alpha-ethylmalonate.

The crystal structure of a Ca2+ salt of alpha-ethylmalonic acid was determined from three-dimensional X-ray diffraction data. The dicarboxylate anion represents the functional side chain of gamma-carboxyglutamic acid (Gla) residues, which are implicated as essential calcium-binding ligands in a variety of proteins. The alpha-ethylmalonate ion chelates the Ca2+ ion in a bidentate manner that involves an O atom from each of the two malonate carboxylate groups. This type of binding arises from the constrained arrangement of carboxylate ligands in the malonate group and may be of significance to the calcium-binding properties of Gla-containing sites in proteins. The Ca2+-malonate chelation forms a six-membered ring, which is stabilized by interactions that are consistent with the preferred stereochemistries of both calcium-carboxylate and metal-malonate complexes. No other interactions are observed between Ca2+ ions and alpha-ethylmalonate ions that depend upon the malonate juxtaposition of two carboxylate groups. The potential for this type of binding distinguishes Gla residues from the monocarboxylate residues, aspartate and glutamate, and confers a novel calcium-chelation ability upon Gla-containing sites in proteins.