Multichamber Multipotentiostat System for Cellular Microphysiometry.

Multianalyte microphysiometry is a powerful technique for studying cellular metabolic flux in real time. Monitoring several analytes concurrently in a number of individual chambers, however, requires specific instrumentation that is not available commercially in a single, compact, benchtop form at an affordable cost. We developed a multipotentiostat system capable of performing simultaneous amperometric and potentiometric measurements in up to eight individual chambers. The modular design and custom LabVIEW™ control software provide flexibility and allow for expansion and modification to suit different experimental conditions. Superior accuracy is achieved when operating the instrument in a standalone configuration; however, measurements performed in conjunction with a previously developed multianalyte microphysiometer have shown low levels of crosstalk as well. Calibrations and experiments with primary and immortalized cell cultures demonstrate the performance of the instrument and its capabilities.

Metabolic discrimination of select list agents by monitoring cellular responses in a multianalyte microphysiometer.

Harnessing the potential of cells as complex biosensors promises the potential to create sensitive and selective detectors for discrimination of biodefense agents. Here we present toxin detection and suggest discrimination using cells in a multianalyte microphysiometer (MMP) that is capable of simultaneously measuring flux changes in four extracellular analytes (acidification rate, glucose uptake, oxygen uptake, and lactate production) in real-time. Differential short-term cellular responses were observed between botulinum neurotoxin A and ricin toxin with neuroblastoma cells, alamethicin and anthrax protective antigen with RAW macrophages, and cholera toxin, muscarine, 2,4-dinitro-phenol, and NaF with CHO cells. These results and the post exposure dynamics and metabolic recovery observed in each case suggest the usefulness of cell-based detectors to discriminate between specific analytes and classes of compounds in a complex matrix, and furthermore to make metabolic inferences on the cellular effects of the agents. This may be particularly valuable for classifying unknown toxins.

Real-time cell dynamics with a multianalyte physiometer.

A technique for simultaneously measuring changes in extracellular glucose, lactate, and oxygen concentrations in conjunction with acidification rates on a Cytosensor Microphysiometer is described. Platinum electrodes are inserted into the standard Cytosensor plunger head and modified with enzymes and biocompatible polymeric films. The lactate and glucose oxidase enzymes catalyze the reaction of lactate and glucose. An end product of these catalyses, H2O2, is measured amperometrically. Extracellular oxygen is also measured amperometrically, while the acidification rate is measured potentiometrically by the Cytosensor. Useful information is obtained during the Cytosensor stop-flow cycles, which produce increasing or decreasing peaks, owing to the production of lactic and carbonic acid and consumption of glucose and oxygen by the cells. Fabrication of the modified sensor head and deposition of the electrode films is detailed, and the operation of the technique is described and illustrated by the simultaneous measurement of all four analytes during the addition of 20 mM fluoride to mouse fibro blast cells.

A microphysiometer for simultaneous measurement of changes in extracellular glucose, lactate, oxygen, and acidification rate.

A microphysiometer capable of measuring changes in extracellular glucose, lactate, oxygen, and acidification rate has been developed by incorporating modified electrodes into a standard Cytosensor Microphysiometer plunger. Glucose and lactate are measured indirectly at platinum electrodes by amperometric oxidation of hydrogen peroxide, which is produced from catalysis of glucose and lactate at films containing their respective entrapped oxidase. Oxygen is measured amperometrically at a platinum electrode coated with a Nafion film, while the acidification rate is measured potentiometrically by a Cytosensor Microphysiometer. Analytical information is obtained during the Cytosensor stop-flow cycles, where the electrodes measure changes in the extracellular medium corresponding to the consumption or production of the analyte by the cells. Modification of the Cytosensor plunger for multianalyte determination is described, and the operation of the technique is illustrated by the simultaneous measurement of all four analytes during the addition of fluoride and DNP to Chinese hamster ovary cells and fluoride and antimycin A to mouse fibroblast cells. Cell metabolic recovery and dynamics after exposure to agents can also be observed in specific cases.

Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer.

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.