Stable High-Capacity Elemental Sulfur Cathodes with Simple Process for Lithium Sulfur Batteries.

Lithium sulfur batteries are suitable for drones due to their high gravimetric energy density (2600 Wh/kg of sulfur). However, on the cathode side, high specific capacity with high sulfur loading (high areal capacity) is challenging due to the poor conductivity of sulfur. Shuttling of Li-sulfide species between the sulfur cathode and lithium anode also limits specific capacity. Sulfur-carbon composite active materials with encapsulated sulfur address both issues but require expensive processing and have low sulfur content with limited areal capacity. Proper encapsulation of sulfur in carbonaceous structures along with active additives in solution may largely mitigate shuttling, resulting in cells with improved energy density at relatively low cost. Here, composite current collectors, selected binders, and carbonaceous matrices impregnated with an active mass were used to award stable sulfur cathodes with high areal specific capacity. All three components are necessary to reach a high sulfur loading of 3.8 mg/cm2 with a specific/areal capacity of 805 mAh/g/2.2 mAh/cm2. Good adhesion between the carbon-coated Al foil current collectors and the composite sulfur impregnated carbon matrices is mandatory for stable electrodes. Swelling of the binders influenced cycling retention as electroconductivity dominated the cycling performance of the Li-S cells comprising cathodes with high sulfur loading. Composite electrodes based on carbonaceous matrices in which sulfur is impregnated at high specific loading and non-swelling binders that maintain the integrated structure of the composite electrodes are important for strong performance. This basic design can be mass produced and optimized to yield practical devices.

Proteinoid Polymers and Nanocapsules for Cancer Diagnostics, Therapy and Theranostics: In Vitro and In Vivo Studies.

Proteinoids-simple polymers composed of amino acids-were suggested decades ago by Fox and coworkers to form spontaneously by heat. These special polymers may self-assemble in micrometer structures called proteinoid microspheres, presented as the protocells of life on earth. Interest in proteinoids increased in recent years, in particular for nano-biomedicine. They were produced by stepwise polymerization of 3-4 amino acids. Proteinoids based on the RGD motif were prepared for targeting tumors. Nanocapsules form by heating proteinoids in an aqueous solution and slowly cooling to room temperature. Proteinoid polymers and nanocapsules suit many biomedical applications owing to their non-toxicity, biocompatibility and immune safety. Drugs and/or imaging reagents for cancer diagnostic, therapeutic and theranostic applications were encapsulated by dissolving them in aqueous proteinoid solutions. Here, recent in vitro and in vivo studies are reviewed.

Mitigation of Oxygen Evolution and Phase Transition of Li-Rich Mn-Based Layered Oxide Cathodes by Coating with Oxygen-Deficient Perovskite Compounds.

Li-rich Mn-based layered oxide cathodes with a high discharge capacity hold great promise for high energy density lithium-ion batteries. However, application is hampered by voltage and capacity decay and gas evolution during cycling due to interfacial side reactions. Here, we report coating by oxygen-deficient perovskite La0.9Sr0.1CoO3 using the Pechini process. X-ray photoelectron spectroscopy and scanning transmission electron microscopy both exhibit a uniform coating layer with a high oxygen vacancy concentration. The coating effectively mitigates the first cycle irreversible capacity loss and voltage decay while increasing cyclability. Optimized coating improves capacity retention from 55.6% to 84.8% after 400 cycles at 2 C. Operando differential electrochemical mass spectroscopy shows that such a coating can significantly mitigate the release of oxygen and carbon dioxide. Electrochemical impedance spectroscopy and post-mortem analysis indicate that the coating layer forms a stable interface and restricts structure evolution and cation mixing during cycling, conferring these cathode materials with better cycling and voltage stability. The perovskite can be applied to other cathodes with high voltage and capacity to suppress interfacial side reactions toward developing stable high energy density batteries.

Highly Stable 4.6 V LiCoO2 Cathodes for Rechargeable Li Batteries by Rubidium-Based Surface Modifications.

Among extensively studied Li-ion cathode materials, LiCoO2 (LCO) remains dominant for portable electronic applications. Although its theoretical capacity (274 mAh g-1 ) cannot be achieved in Li cells, high capacity (≤240 mAh g-1 ) can be obtained by raising the charging voltage up to 4.6 V. Unfortunately, charging Li-LCO cells to high potentials induces surface and structural instabilities that result in rapid degradation of cells containing LCO cathodes. Yet, significant stabilization is achieved by surface coatings that promote formation of robust passivation films and prevent parasitic interactions between the electrolyte solutions and the cathodes particles. In the search for effective coatings, the authors propose RbAlF4 modified LCO particles. The coated LCO cathodes demonstrate enhanced capacity (>220 mAh g-1 ) and impressive retention of >80/77% after 500/300 cycles at 30/45 °C. A plausible mechanism that leads to the superior stability is proposed. Finally the authors demonstrate that the main reason for the degradation of 4.6 V cells is the instability of the anode side rather than the failure of the coated cathodes.

Stabilizing High-Voltage LiNi0.5 Mn1.5 O4 Cathodes for High Energy Rechargeable Li Batteries by Coating With Organic Aromatic Acids and Their Li Salts.

Here, three types of surface coatings based on adsorption of organic aromatic acids or their Li salts are applied as functional coating substrates to engineer the surface properties of high voltage LiNi0.5 Mn1.5 O4 (LNMO) spinel cathodes. The materials used as coating include 1,3,5-benzene-tricarboxylic acid (trimesic acid [TMA]), its Li-salt, and 1,4-benzene-dicarboxylic acid (terephthalic acid). The surface coating involves simple ethanol liquid-phase mixing and low-temperature heat treatment under nitrogen flow. In typical comparative studies, TMA-coated (3-5%) LNMO cathodes deliver >90% capacity retention after 400 cycles with significantly improved rate performance in Li-coin cells at 30 °C compared to uncoated material with capacity retention of ≈40%. The cathode coating also prevents the rapid drop in the electrochemical activity of high voltage Li cells at 55 °C. Studies of high voltage full cells containing TMA coated cathodes versus graphite anodes also demonstrate improved electrochemical behavior, including improved cycling performance and capacity retention, increased rate capabilities, lower voltage hysteresis, and very minor direct current internal resistance evolution. In line with the highly positive effects on the electrochemical performance, it is found that these coatings reduce detrimental transition metal cations dissolution and ensure structural stability during prolonged cycling and thermal stability at elevated temperatures.

Evaluation of Mg[B(HFIP)4]2-Based Electrolyte Solutions for Rechargeable Mg Batteries.

One of the greatest challenges toward rechargeable magnesium batteries is the development of noncorrosive electrolyte solutions with high anodic stability that can support reversible Mg deposition/dissolution. In the last few years, magnesium electrolyte solutions based on Cl-free fluorinated alkoxyborates were investigated for Mg batteries due to their high anodic stability and ionic conductivity and the possibility of reversible deposition/dissolution in ethereal solvents. Here, the electrochemical performance of Mg[B(hexafluoroisopropanol)4]2/dimethoxyethane (Mg[B(HFIP)4]2/DME) solutions was examined. These electrolyte solutions require a special "conditioning" pretreatment that removes undesirable active moieties. Such a process was developed and explored, and basic scientific issues related to the mechanism by which it affects Mg deposition/dissolution were addressed. The chemical changes that occur during the conditioning process were examined. Mg[B(HFIP)4]2/DME solutions were found to enable reversible Mg deposition, albeit with a relatively low Coulombic efficiency of 95% during the first cycles. Prolonged deposition/dissolution cycling tests demonstrate a stable behavior of magnesium electrodes. Overall, this system presents a reasonable electrolyte solution and can serve as a basis for future efforts to develop chlorine-free alternatives for secondary magnesium batteries. It is clear that such a conditioning process is mandatory, as it removes reactive contaminants that lead to unavoidable passivation and deactivation of Mg electrodes from the solution.

Innovative functional polymerization of pyrrole-N-propionic acid onto WS2 nanotubes using cerium-doped maghemite nanoparticles for photothermal therapy.

Tungsten disulfide nanotubes (WS2-NTs) were found to be very active for photothermal therapy. However, their lack of stability in aqueous solutions inhibits their use in many applications, especially in biomedicine. Few attempts were made to chemically functionalize the surface of the NTs to improve their dispersability. Here, we present a new polymerization method using cerium-doped maghemite nanoparticles (CM-NPs) as magnetic nanosized linkers between the WS2-NT surface and pyrrole-N-propionic acid monomers, which allow in situ polymerization onto the composite surface. This unique composite is magnetic, and contains two active entities for photothermal therapy-WS2 and the polypyrrole. The photothermal activity of the composite was tested at a wavelength of 808 nm, and significant thermal activity was observed. Moreover, the polycarboxylated polymeric coating of the NTs enables effective linkage of additional molecules or drugs via covalent bonding. In addition, a new method was established for large-scale synthesis of CM-NPs and WS2-NT-CM composites.

Combined nanofiltration and advanced oxidation processes with bifunctional carbon nanomembranes.

Wastewater reclamation is becoming a top global interest as population growth and rapid industrialization pose a major challenge that requires development of sustainable cost-effective technologies and strategies for wastewater treatment. Carbon nanomembranes (CNMs)-synthetic 2D carbon sheets-can be tailored chemically with specific surface functions and/or physically with nanopores of well-defined size as a strategy for multifunctional membrane design. Here, we explore a bifunctional design for combined secondary wastewater effluent treatment with dual action of membrane separation and advanced oxidation processes (AOP), exploiting dissolved oxygen. The bifunctional membrane consists of a CNM layer on top of a commercial ultrafiltration membrane (Microlon™) and a spray-coated reduced graphene oxide (rGO) thin film as the bottom layer. The CNM/support/rGO membrane was characterized by helium ion and atomic force microscopy, FTIR, XPS with a four-point conductivity probe, cyclic voltammetry, galvanostatic measurements, and impedance spectroscopy. Combined treatment of water by nanofiltration and AOP was demonstrated, employing a unique three electrode-dead end filtration setup that enables concurrent application of potential and pressure on the integrated membrane. For the model organic compound methylene blue, oxidation (by the Fenton reaction) was evaluated using UV-vis (610 nm). The rejection rate and permeability provided by the CNM layer were evaluated by dissolving polyethylene glycol (400 and 1000 Da) in the feed solution and applying pressure up to 1.5 bar. This demonstration of combined membrane separation and AOP using an integrated membrane opens up a new strategy for wastewater treatment.

Engineering of Doxorubicin-Encapsulating and TRAIL-Conjugated Poly(RGD) Proteinoid Nanocapsules for Drug Delivery Applications.

Proteinoids are non-toxic biodegradable polymers prepared by thermal step-growth polymerization of amino acids. Here, P(RGD) proteinoids and proteinoid nanocapsules (NCs) based on D-arginine, glycine, and L-aspartic acid were synthesized and characterized for targeted tumor therapy. Doxorubicin (Dox), a chemotherapeutic drug used for treatment of a wide range of cancers, known for its adverse side effects, was encapsulated during self-assembly to form Dox/P(RGD) NCs. In addition, tumor necrosis factor-related apoptosis-inducing ligand (TRAIL), which can initiate apoptosis in most tumor cells but undergoes fast enzyme degradation, was stabilized by covalent conjugation to hollow P(RGD) NCs. The effect of polyethylene glycol (PEG) conjugation was also studied. Cytotoxicity tests on CAOV-3 ovarian cancer cells demonstrated that Dox/P(RGD) and TRAIL-P(RGD) NCs were as effective as free Dox and TRAIL with cell viability of 2% and 10%, respectively, while PEGylated NCs were less effective. Drug-bearing P(RGD) NCs offer controlled release with reduced side effects for improved therapy.

Improving Amorphous Carbon Anodes for Na Ion Batteries by Surface Treatment of a Presodiated Electrode with Al2O3.

Disordered carbons are promising anode materials for sodium ion batteries. However, a major drawback of these materials is their low coulombic efficiency in the first cycles, which indicates parasitic reactions. Such reactions can be suppressed by alumina coating on the surface of the anodic materials; more ions are then available for electrochemical activity, and less electrolyte solution is lost. On the other hand, some pores and surface edge sites are passivated by the coating and are no longer available for reversible reaction with sodium ions; hence, their contribution is eliminated, leading to reduction in specific capacity. We show herein that electrochemical insertion of sodium ions into carbon anodes prior to alumina coating has a double positive effect on anode perfomances, meaning preventing passivation and maintaining high specific capacity. We show that the artificial layer still prevented parasitic reactions, while the pores and surface edge sites retained electrochemical activity. The capacity values were thus restored and even became higher as a result of preventing the development of a surface layer. Ultraviolet photoelectron spectroscopy measurements assessed the energetic states of the electrodes and confirmed that the alumina coating forms a barrier for interfacial electron transfer from the electrode to the solution at any polarization stage.

Bio-inspired Photocatalytic Ruthenium Complexes: Synthesis, Optical Properties, and Solvatochromic Effect.

We report the synthesis, characterization, and photo-physical properties of two new rutheniumII -phenol-imidazole complexes. These bio-mimetic complexes have potential as photocatalysts for water splitting. Owing to their multiple phenol-imidazole groups, they have a higher probability of light-induced radical formation than existing complexes. The newly synthesized complexes show improved overlap with the solar spectrum compared to other rutheniumII -phenol-imidazole complexes, and their measured lifetimes are suitable for light-induced radical formation. In addition, we conducted solvatochromic absorption measurements, which elegantly follow Marcus theory, and demonstrate the symmetry differences between the two complexes. The solvatochromic measurements further imply electron localization onto one of the ligands. The new complexes may find applications in photocatalysis, dye-sensitized solar cells, biomedicine, and sensing. Moreover, their multiple chelating units make them promising candidates for light-activated metal organic radical frameworks, i.e. metal-organic frameworks that contain organic radicals activated by light.