RESUMO
Synchrotron radiation (SR) has proven to be an invaluable contributor to the field of molecular spectroscopy, particularly in the terahertz region (1-10 THz) where its bright and broadband properties are currently unmatched by laboratory sources. However, measurements using SR are currently limited to a resolution of around 30 MHz, due to the limits of Fourier-transform infrared spectroscopy. To push the resolution limit further, we have developed a spectrometer based on heterodyne mixing of SR with a newly available THz molecular laser, which can operate at frequencies ranging from 1 to 5.5 THz. This spectrometer can record at a resolution of 80 kHz, with 5 GHz of bandwidth around each molecular laser frequency, making it the first SR-based instrument capable of sub-MHz, Doppler-limited spectroscopy across this wide range. This allows closely spaced spectral features, such as the effects of internal dynamics and fine angular momentum couplings, to be observed. Furthermore, mixing of the molecular laser with a THz comb is demonstrated, which will enable extremely precise determinations of molecular transition frequencies.
RESUMO
A new spectrometer allowing both high resolution and broadband coverage in the terahertz (THz) domain is proposed. This instrument exploits the heterodyne technique between broadband synchrotron radiation and a quantum-cascade-laser-based molecular THz laser that acts as the local oscillator. Proof of principle for exploitation for spectroscopy is provided by the recording of molecular absorptions of hydrogen sulfide (H2S) and methanol (CH3OH) around 1.073 THz. Ultimately, the spectrometer will enable to cover the 1-4 THz region in 5 GHz windows at Doppler resolution.
RESUMO
Correction for 'Transport mechanisms in a puckered graphene-on-lattice' by T. Xu et al., Nanoscale, 2018, 10, 7519-7525.
RESUMO
Understanding the fundamental properties of graphene when its topography is patterned by the use of a compliant substrate is essential to improve the performances of graphene sensors. Here we suspend a graphene monolayer on SiO2 nanopillar arrays to form a puckered graphene-on-lattice and investigate the strain and electrical transport at the nanoscale. Despite a nonuniform strain in the graphene-on-lattice, the resistivity is governed by thermally activated transport and not the strain. We show that the high thermal activation energy results from a low charge carrier density and a periodic change of the chemical potential induced by the interaction of the graphene monolayer with the nanopillars, making the use of graphene-on-lattice attractive to further increase the electrical response of graphene sensors.
RESUMO
The chemical composition of single particles deposited on industrial filters located in three different chimneys of an iron-manganese (Fe-Mn) alloy manufacturing plant have been compared using aerosol time-of-flight mass spectrometry (ATOFMS) and scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX). Very similar types of particles were observed using both analytical techniques. Calcium-containing particles dominated in the firing area of the sintering unit, Mn and/or Al-bearing particles were observed at the cooling area of the sintering unit, while Mn-containing particles were dominant at the smelting unit. SEM-EDX analysis of particles collected downstream of the industrial filters showed that the composition of the particles emitted from the chimneys is very similar to those collected on the filters. ATOFMS analysis of ore samples was also performed to identify particulate emissions that could be generated by wind erosion and manual activities. Specific particle types have been identified for each emission source (chimneys and ore piles) and can be used as tracers for source apportionment of ambient PM measured in the vicinity of the industrial site.