A Comparative Investigation of Chemical Decontamination Methods for In-Situ Cleaning of Dental Implant Surfaces.

Surface chemistry evaluation is crucial in assessing the efficacy of chemical decontamination products for titanium implants. This study aimed to investigate the effectiveness of chemical decontamination solutions in cleaning a contaminated dental implant surface and to evaluate the potential of combining Pluronic gel with hydrogen peroxide (NuBone®Clean) by evaluating pellicle disruption and re-formation on implant surfaces. In addition, ensuring safety with in vitro and human testing protocols. X-ray Photoelectron Spectroscopy (XPS) was utilised for surface analysis. All the tested gels had some effect on the surface cleanness except for PrefGel®. Among the tested chemical decontamination candidates, NuBone®Clean demonstrated effectiveness in providing a cleaner titanium surface. Furthermore, none of the tested chemical agents exhibited cytotoxic effects, and the safety assessment showed no adverse events. The results of this study highlight the significance of conducting comprehensive evaluations, encompassing safety and efficacy, before introducing new chemical agents for dental treatments. The findings suggest that NuBone®Clean shows potential as a chemical decontamination solution for implant surfaces. However, further investigation through randomised clinical trials is necessary. By adhering to rigorous testing protocols, the development of safe and efficient chemical decontamination strategies can be advanced, benefiting patients and promoting progress in implant dentistry.

Backscatter from therapeutic doses of ionizing irradiation does not impair cell migration on titanium implants in vitro.

OBJECTIVE: The influence of radiation backscatter from titanium on DNA damage and migration capacity of human osteoblasts (OBs) and mesenchymal stem cells (MSCs) may be critical for the osseointegration of dental implants placed prior to radiotherapy. In order to evaluate effects of radiation backscatter, the immediate DNA damage and migration capacity of OBs and MSCs cultured on titanium or plastic were compared after exposure to ionizing irradiation. MATERIALS AND METHODS: Human OBs and MSCs were seeded on machined titanium, moderately rough fluoride-modified titanium, or tissue culture polystyrene, and irradiated with nominal doses of 2, 6, 10, or 14 Gy. Comet assay was performed immediately after irradiation, while a scratch wound healing assay was initiated 24 h post-irradiation. Fluorescent live cell imaging documented the migration. RESULTS: DNA damage increased with higher dose and with backscatter from titanium, and MSCs were significantly more affected than OBs. All doses of radiation accelerated the cell migration on plastic, while only the highest dose of 10 Gy inhibited the migration of both cell types on titanium. CONCLUSIONS: High doses (10 Gy) of radiation inhibited the migration capacity of both cell types on titanium, whereas lower doses (2 and 6 Gy) did not affect the migration of either OBs or MSCs. CLINICAL RELEVANCE: Fractionated doses of 2 Gy/day, as distributed in conventional radiotherapy, appear not to cause severe DNA damage or disturb the migration of OBs or MSCs during osseointegration of dental implants.

The dose-dependent impact of γ-radiation reinforced with backscatter from titanium on primary human osteoblasts.

In head and neck cancer patients receiving dental implants prior to radiotherapy, backscatter from titanium increases the radiation dose close to the surface, and may affect the osseointegration. The dose-dependent effects of ionizing radiation on human osteoblasts (hOBs) were investigated. The hOBs were seeded on machined titanium, moderately rough fluoride-modified titanium, and tissue culture polystyrene, and cultured in growth- or osteoblastic differentiation medium (DM). The hOBs were exposed to ionizing γ-irradiation in single doses of 2, 6 or 10 Gy. Twenty-one days post-irradiation, cell nuclei and collagen production were quantified. Cytotoxicity and indicators of differentiation were measured and compared to unirradiated controls. Radiation with backscatter from titanium significantly reduced the number of hOBs but increased the alkaline phosphatase activity in both types of medium when adjusted to the relative cell number on day 21. Irradiated hOBs on the TiF-surface produced similar amounts of collagen as unirradiated controls when cultured in DM. The majority of osteogenic biomarkers significantly increased on day 21 when the hOBs had been exposed to 10 Gy, while the opposite or no effect was observed after lower doses. High doses reinforced with backscatter from titanium resulted in smaller but seemingly more differentiated subpopulations of osteoblasts.

Immunohistochemical comparison of lateral bone augmentation using a synthetic TiO2 block or a xenogeneic graft in chronic alveolar defects.

OBJECTIVES: To evaluate osteogenic markers and alveolar ridge profile changes in guided bone regeneration (GBR) of chronic noncontained bone defects using a nonresorbable TiO2 block. MATERIALS AND METHODS: Three buccal bone defects were created in each hemimandible of eight beagle dogs and allowed to heal for 8 weeks before GBR. Treatment was assigned by block randomization: TiO2 block: TiO2 -scaffold and a collagen membrane, DBBM particulates: Deproteinized bovine bone mineral (DBBM) and a collagen membrane, Empty control: Only collagen membrane. Bone regeneration was assessed on two different healing timepoints: early (4 weeks) and late healing (12 weeks) using several immunohistochemistry markers including alpha-smooth muscle actin (α-SMA), osteopontin, osteocalcin, tartrate-resistant acid phosphatase, and collagen type I. Histomorphometry was performed on Movat Pentachrome-stained and Von Kossa/Van Gieson-stained sections. Stereolithographic (STL) models were used to compare alveolar profile changes. RESULTS: The percentage of α-SMA and osteopontin increased in TiO2 group after 12 weeks of healing at the bone-scaffold interface, while collagen type I increased in the empty control group. In the defect area, α-SMA decreased in the empty control group, while collagen type I increased in the DBBM group. All groups maintained alveolar profile from 4 to 12 weeks, but TiO2 group demonstrated the widest soft tissue contour profile. CONCLUSIONS: The present findings suggested contact osteogenesis when GBR is performed with a TiO2 block or DBBM particulates. The increase in osteopontin indicated a potential for bone formation beyond 12 weeks. The alveolar profile data indicated a sustained lateral increase in lateral bone augmentation using a TiO2 block and a collagen membrane, as compared with DBBM and a collagen membrane or a collagen membrane alone.

Impact of simultaneous placement of implant and block bone graft substitute: an in vivo peri-implant defect model.

BACKGROUND: Insufficient bone volume around an implant is a common obstacle when dental implant treatment is considered. Limited vertical or horizontal bone dimensions may lead to exposed implant threads following placement or a gap between the bone and implant. This is often addressed by bone augmentation procedures prior to or at the time of implant placement. This study evaluated bone healing when a synthetic TiO2 block scaffold was placed in circumferential peri-implant defects with buccal fenestrations. METHODS: The mandibular premolars were extracted and the alveolar bone left to heal for 4 weeks prior to implant placement in six minipigs. Two cylindrical defects were created in each hemi-mandible and were subsequent to implant placement allocated to treatment with either TiO2 scaffold or sham in a split mouth design. After 12 weeks of healing time, the samples were harvested. Microcomputed tomography (MicroCT) was used to investigate defect fill and integrity of the block scaffold. Distances from implant to bone in vertical and horizontal directions, percentage of bone to implant contact and defect fill were analysed by histology. RESULTS: MicroCT analysis demonstrated no differences between the groups for defect fill. Three of twelve scaffolds were partly fractured. At the buccal sites, histomorphometric analysis demonstrated higher bone fraction, higher percentage bone to implant contact and shorter distance from implant top to bone 0.5 mm lateral to implant surface in sham group as compared to the TiO2 group. CONCLUSIONS: This study demonstrated less bone formation with the use of TiO2 scaffold block in combination with implant placement in cylindrical defects with buccal bone fenestrations, as compared to sham sites.

Comparison of postoperative intraoral scan versus cone beam computerised tomography to measure accuracy of guided implant placement-A prospective clinical study.

OBJECTIVE: To evaluate the accuracy of implant placement with a digitally planned guided implant procedure. Two methods for identifying the actual postoperative positioning of the implants were compared: CBCT and IO scanning. MATERIAL AND METHODS: Twenty-eight implants with a sandblasted and acid-etched surface were placed in thirteen patients using tooth-supported surgical guides following a digital planning procedure. The implants were submerged for 12-15 weeks. New CBCT images were taken for identification of the implant position. After second stage surgery, scan bodies were mounted on the implants and scanned with an IO digital scanner. The recordings from the CBCT images and the IO scans were compared with respect to the identified positions of the implants. RESULTS: The study did not resolve any significant differences of the identified positioning of the implants as measured by CBCT or IO, except for the apical deviations at the coronal and apical points. The angular difference between CBCT and IO scanning at the coronal point was -0.011 (±0.6) degrees, whereas the 3D deviation was 0.03(±0.17) mm. The distal deviation between CBCT and IO scanning was 0.01(± 0.16) mm, and the vestibular deviation 0.033(± 0.16) mm and the apical deviation difference was 0.09(± 0.16) mm. The 3D deviation at the apical point was 0.04(± 0.22) mm. The distal deviation between CBCT and IO scanning was 0.06(± 0.19) mm, and the vestibular deviation 0.032(± 0.23) mm and the apical deviation difference was 0.09(± 0. 16) mm. CONCLUSION: The study demonstrated that accuracy measurements using IO scanning yields comparable results to those obtained by CBCT.

Hydrofluoric acid treatment of titanium surfaces enhances the proliferation of human gingival fibroblasts.

The attachment of implants relies on bone and soft tissue biocompatibility. The aim of this article is to investigate the effect of fluoride-modified metallic titanium (Ti) surfaces (Ti-F) on proliferation and differentiation of human gingival fibroblasts. Human gingival fibroblast cells were exposed to hydrofluoric acid-modified Ti coins (Ti-F) for 1, 3, 7, 14 and 21 days, and untreated coins were used as controls. A five- to six-fold increase in the proliferation of human gingival fibroblasts on Ti-F compared to Ti surfaces was observed. Enhanced gene expression of interleukin-6 and osteoprotegerin was found at 7 days. Increased levels of sclerostin, interleukin-6 and osteoprotegerin in the media from human gingival fibroblasts cultured on Ti-F coins were found compared to controls. Our results confirm that hydrofluoric acid-modified surface may indirectly enhance the firm attachment of implant surface to junction epithelium, soft tissue epithelium, which would give protection for underlying osseous structures making osseointegration of the dental implant possible.

In Vivo Accuracy of Implant Placement Using a Full Digital Planning Modality and Stereolithographic Guides.

PURPOSE: The aim of this study was to investigate a guided implant surgery procedure performed without any manual processes, by assessing the in vivo results following a digital planning and placement of dental implants using surgical templates. MATERIALS AND METHODS: Eligible patients were screened and enrolled in this prospective clinical study. A cone beam computed tomography (CBCT) scan was acquired, and the remaining dentition and soft tissues were recorded by an intraoral scanner after enrollment. The CBCT data and intraoral scan were fused in the planning software. The prosthetic reconstructions were digitally designed by a prosthodontist, and the ideal position of the dental implants was determined. The surgical template was digitally designed based on this plan, and a guide design was exported and manufactured in a stereolithographic process. The entire surgical procedure was performed with the aid of the template. An intraoral scan was performed 10 days after stage-two surgery using scan bodies placed on the implants. Digital preoperative and postoperative models were compared, and the metric difference between the planned and achieved implant positions was calculated. RESULTS: Twenty-seven implants were placed in 20 patients using tooth-supported surgical templates after a digital planning procedure. No implants were lost during the study period. The mean lateral deviation measured at the coronal point was 1.05 mm (SD: 0.59; range: 2.74 to 0.36). The mean lateral deviation measured at the apical point was 1.63 mm (SD: 1.05; range: 5.16 to 0.56). The mean depth displacement was + 0.48 mm (SD: 0.50; range: 1.33 to -0.52). The mean angle deviation was 3.85 degrees (SD: 1.83; range: 8.6 to 1.25). CONCLUSION: A simplified full digital planning procedure yields results comparable to conventional guided implant surgery. The main deviation between the planned and achieved implant positions in this prospective clinical study was angular. More clinical studies are needed to verify the procedure further.

THEMATIC ABSTRACT REVIEW: Implantoplasty: A Valuable Method for the Management of Peri-implantitis?

No abstract available.

TiO2 scaffolds in peri-implant dehiscence defects: an experimental pilot study.

OBJECTIVES: The primary objective was to assess osseointegration of implants with dehiscence defects grafted with a TiO2 scaffold. The secondary objective was to assess the performance of the scaffold in terms of mechanical stability and bone fill. MATERIAL AND METHODS: Five minipigs had the mandibular premolars extracted. After healing, two dental implants (SLActive® , Institut Straumann AG, Basel, Switzerland) with associated semi-cylindrical dehiscence defects (Ø = 6 mm, height = 10 mm) were installed in each quadrant. The defects were grafted with test scaffolds (n = 10) or control autologous bone blocks (n = 10). After 3 months submerged healing, the pigs were euthanized and the sites analysed by microcomputed tomography and histology. RESULTS: Four minipigs were available for second stage surgery; (n = 9) experimental and (n = 7) control sites. The mean bone-to-implant contact on the defect side was 82% (±10%) and 79% (±11%) in the test and control groups respectively. The mean level of first bone-to-implant contact was more coronal on the defect side in the test group 3.2 mm (±0.4 mm) than in the control group 3.6 mm (±1.1 mm). The defect area occupied by bone within the extent of the scaffold varied, but averaged 37% (±14.6%) whereas the material itself occupied 7.4% (±3.5%). CONCLUSIONS: Within the limitations of the study, the results suggest that the novel synthetic scaffold material perform similar to the autologous bone block control with respect to implant osseointegration. The mechanical properties of the scaffold appeared sufficient to withstand clinical load in the present experimental model.

The influence of surface nanoroughness, texture and chemistry of TiZr implant abutment on oral biofilm accumulation.

OBJECTIVES: The aim of the study was to examine surface nanoroughness, texture and chemistry of dental implant abutment and to investigate how these parameters influence oral biofilm formation in healthy subjects. MATERIALS AND METHODS: Eight different nanorough TiZr surfaces were produced by polishing, machining, cathodic polarization and acid etching. Surface topography was examined using field emission scanning electron microscope and a blue light laser profilometer. Surface chemistry was analyzed by secondary ion mass spectrometry and X-ray photoelectron spectroscopy. Surface hydrophilicity was tested by measuring contact angle on the surfaces. A human in vivo study using a splint model was employed to evaluate oral biofilm accumulation on these surfaces. RESULTS: Different surface textures (flat, grooved and irregular) were created with nanoroughness from 29 to 214 nm. Some test surfaces were incorporated with hydrogen by cathodic polarization and/or acid etching with HCl/H(2)SO(4). Nanoroughness (S(a)) positively correlated with microbial adhesion. Biofilm accumulation was less pronounced on flat and grooved than on irregular surfaces. No significant association between hydrogen content or hydrophilicity of the surface and biofilm accumulation was observed. CONCLUSIONS: Nanoroughness (< 214 nm) and surface texture influence oral biofilm accumulation independent of surface chemistry and hydrophilicity. Surface hydrogen, which has previously been shown to promote fibroblast growth, does not affect biofilm formation.

The effect of hydrofluoric acid treatment of titanium and titanium dioxide surface on primary human osteoblasts.

OBJECTIVE: The aim of the study was to investigate solely the effect of fluoride on the surface chemistry of polycrystalline ceramic titanium dioxide (TiO2 ) and metallic titanium (Ti) and its effect on proliferation and differentiation of primary human osteoblasts (NHO). MATERIALS AND METHODS: The NHO cells were exposed to fluoride-modified and unmodified samples for 1, 3, 7, 14 and 21 days. The fluoride effect on the mRNA expression was quantified and measured. The secretion of cytokines and interleukins in the cell culture medium was measured by Luminex, gene expression by RT-PCR, and compared with untreated controls. The effect on cell growth after 1 and 3 days in culture was measured using [(3) H]-thymidine incorporation. Fluoride release was measured using an ion-selective electrode. The surfaces were examined by X-ray photoelectron spectroscopy and profilometry. RESULTS: The fluoride release study detected that fluoride content easily washed off in TiO2 coins when compared with Ti coins. No increase in cell proliferation was found among fluoride-modified TiO2 surfaces compared with controls, except for washed Ti coins with fluoride modification. The cell differentiation with regard to gene expression showed no significant differences in both fluoride-modified and unmodified samples and less effect on protein release for all groups. CONCLUSIONS: The fluoride from hydrofluoric acid treatment on Ti and TiO2 surfaces gave no specific effect on primary human osteoblast cells. The study indicates that the released fluoride is not the unique factor for the bioactivity of Ti and TiO2 surfaces.

Effect of proline-rich synthetic peptide-coated titanium implants on bone healing in a rabbit model.

PURPOSE: Previous studies have demonstrated the capacity of a designed proline-rich synthetic peptide to stimulate osteoblast differentiation and biomineralization in vitro. Therefore, the aim of the present study was to evaluate the osseointegration capacity of titanium (Ti) implants coated with these peptides in a rabbit model. MATERIALS AND METHODS: Four calibrated defects were prepared in the tibiae of three New Zealand rabbits, and the defects were randomized into a test group (peptide-modified machined Ti implant) and a control group (unmodified machined Ti implant). The performance in vivo was investigated after 4 weeks of implantation by real-time reverse transcriptase polymerase chain reaction of bone and inflammatory markers, microcomputed tomographic analysis of mineralized bone, and histologic examination. RESULTS: The peptides adsorbed in agglomerates on Ti and underwent a change in secondary structure upon adsorption, which induced an increase in surface wettability. Gene expression markers indicated that peptide-coated Ti implants had significantly decreased mRNA levels of tartrate-resistant acid phosphatase. A trend toward increased osteocalcin in the peri-implant bone tissue was also seen. Bone morphometric and histologic parameters did not show significant differences, although the peptide group showed a higher percentage of new bone histologically. CONCLUSIONS: Proline-rich peptides have potential as a biocompatible coating for promoting osseointegration of Ti implants by reducing bone resorption.

Porous ceramic titanium dioxide scaffolds promote bone formation in rabbit peri-implant cortical defect model.

Titanium oxide (TiO2) scaffolds have previously been reported to exhibit very low mechanical strength. However, we have been able to produce a scaffold that features a high interconnectivity, a porosity of 91% and a compressive strength above 1.2 MPa. This study analyzed the in vivo performance of the porous TiO2 scaffolds in a peri-implant cortical defect model in the rabbit. After 8 weeks of healing, morphological microcomputed tomography analyses of the defects treated with the TiO2 scaffolds had significantly higher bone volume, bone surface and bone surface-to-volume ratio when compared to sham, both in the cortical and bone marrow compartment. No adverse effects, i.e. tissue necrosis or inflammation as measured by lactate dehydrogenase activity and real-time reverse transcription polymerase chain reaction analysis, were observed. Moreover, the scaffold did not hinder bone growth onto the adjacent cortical titanium implant. Histology clearly demonstrated new bone formation in the cortical sections of the defects and the presence of newly formed bone in close proximity to the scaffold surface and the surface of the adjacent Ti implant. Bone-to-material contact between the newly formed bone and the scaffold was observed in the histological sections. Islets of new bone were also present in the marrow compartment albeit in small amounts. In conclusion, the present investigation demonstrates that TiO2 scaffolds osseointegrate well and are a suitable scaffold for peri-implant bone healing and growth.