RESUMO
In this work, we present (hemi)spherical atomic force microscopy (AFM) sensors for the detection of hydrogen peroxide. Platinum-black (Pt-B) was electrodeposited onto conductive colloidal AFM probes or directly at recessed microelectrodes located at the end of a tipless cantilever, resulting in electrocatalytically active cantilever-based sensors that have a small geometric area but, due to the porosity of the films, exhibit a large electroactive surface area. Focused ion beam-scanning electron microscopy tomography revealed the porous 3D structure of the deposited Pt-B. Given the accurate positioning capability of AFM, these probes are suitable for local in situ sensing of hydrogen peroxide and at the same time can be used for (electrochemical) force spectroscopy measurements. Detection limits for hydrogen peroxide in the nanomolar range (LOD = 68 ± 7 nM) were obtained. Stability test and first in situ proof-of-principle experiments to achieve the electrochemical imaging of hydrogen peroxide generated at a microelectrode and at photocatalytically active structured poly(heptazine imide) films are demonstrated. Force spectroscopic data of the photocatalyst films were recorded in ambient conditions, in solution, and by applying a potential, which demonstrates the versatility of these novel Pt-B-modified spherical AFM probes.
RESUMO
Photocatalytic hydrogen production from water is a promising way to fulfill energy demands and attain carbon emission reduction goals effectively. In this study, a loop photoreactor with a total volume of around 500 mL is presented for the photocatalytic hydrogen evolution using a Pt-loaded polymeric carbon nitride photocatalyst under 365 nm irradiation in the presence of sacrificial reducing agents. The fluid flow pattern of the developed photoreactor was characterized experimentally and the photon flux incident to the loop photoreactor was measured by chemical actinometry. The system displayed exceptional stability, with operation sustained over 70 hours. A design of experiment (DOE) analysis was used to systematically investigate the influence of key parameters - photon flux, photocatalyst loading, stirring speed, and inert gas flow rate - on the hydrogen generation rate. Linear relationships were found between hydrogen evolution rate and photon flux as well as inert gas flow rate. Photocatalyst loading and stirring speed also showed linear correlations, but could not be correctly described by DOE analysis. Instead, linear single parameter correlations could be applied. Notably, the loop photoreactor demonstrated an external photon efficiency up to 17 times higher than reported in literature studies, while scaling the reactor size by a factor of 10.
RESUMO
Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K+ and Na+ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of â¼2-3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH4 as a model reaction, in which they outperform even the benchmark "naked" Au NPs electrostatically stabilized by excess NaBH4. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts.
RESUMO
This study presents a green, ultra-fast, and facile technique for the fabrication of micro/nano-structured and porous Cu electrodes through in-liquid plasma electrolysis using phosphorous-oxoanion-based electrolytes. Besides the preferential surface faceting, the Cu electrodes exhibit unique surface structures, including octahedral nanocrystals besides nanoporous and microporous structures, depending on the employed electrolyte. The incorporation of P-atoms into the Cu surfaces is observed. The modified Cu electrodes display increased roughness, leading to higher current densities for CO2 electroreduction reaction. The selectivity of the modified Cu electrodes towards C2 products is highest for the Cu electrodes treated in Na2 HPO3 and Na3 PO4 electrolytes, whereas those treated in Na2 H2 PO2 produce the most H2 . The Cu electrode treated in Na3 PO4 produces ethylene (23 %) at -1.1â V vs. RHE, and a comparable amount of acetaldehyde (15 %) that is typically observed for Cu(110) single crystals. The enhanced selectivity is attributed to several factors, including the surface morphology, the incorporation of phosphorus into the Cu structure, and the formation of Cu(110) facets. Our results not only advance our understanding of the influence of the electrolyte's nature on the plasma electrolysis of Cu electrodes, but also underscores the potential of in-liquid plasma treatment for developing efficient Cu electrocatalysts for sustainable CO2 conversion.
RESUMO
The current investigation deals with the simple and ecological synthesis of CaO, MgO, CaTiO3, and MgTiO3 for the photocatalytic dilapidation of rhodamine B dye. CaO was procured from chicken eggshell waste by calcination process, while MgO was produced by solution combustion method using urea as a fuel source. Furthermore, CaTiO3 and MgTiO3 were synthesized through an easy and simple solid-state method by mixing thoroughly the synthesized CaO or MgO with TiO2 before calcination at 900 °C. XRD and EDX investigations confirmed the phase formation of the materials. Moreover, FTIR spectra revealed the existence of Ca-Ti-O, Mg-Ti-O, and Ti-O which resembles the chemical composition of the proposed materials. SEM micrographs revealed that the surface of CaTiO3 is rougher with relatively dispersed particles compared to MgTiO3, reflecting a higher surface area of CaTiO3. Diffuse reflectance spectroscopy investigations indicated that the synthesized materials can act as photocatalysts under UV illumination. Accordingly, CaO and CaTiO3 effectively degraded rhodamine B dye within 120 min with a photodegradation activity of 63% and 72%, respectively. In contrast, the photocatalytic degradation activity of MgO and MgTiO3 was much lower, since only 21.39 and 29.44% of the dye were degraded, respectively after 120 min of irradiation. Furtheremore, the photocatalytic activity of the mixture from both Ca and Mg titanates was 64.63%. These findings might be valuable for designing potential and affordable photocatalysts for wastewater purification.
RESUMO
In this contribution, poly(maleic acid)-grafted cross-linked chitosan/montmorillonite composite nanospheres (PMAL-CTS/MMT) were synthesized via a facile approach for adsorption of organic dyes. The adsorption capacity of PMAL-CTS/MMT towards anionic acid yellow-17 (AY17) and cationic brilliant green (BG) was compared to PMAL-CTS, CTS/MMT, and MMT to emphasize the role of surface functional groups introduced by poly(maleic acid) and montmorillonite. Interestingly, the adsorption efficiency of PMAL-CTS/MMT nanocomposite towards both dyes in the single and binary systems was extremely high due to plenty of functional groups. The affinity of PMAL-CTS/MMT towards cationic and anionic dyes resulted from the feasible modulation of the surface charges as a function of the solution pH. The PMAL-CTS/MMT nanocomposite exhibited a maximum adsorption capacity of 518 and 1910 mg g-1 for AY17 and BG, respectively, which is higher than most of the adsorbents reported in recent literature studies. The proposed mechanism based on the characterization of PMAL-CTS/MMT after the adsorption highlighted that the adsorption is mainly controlled by electrostatic interaction, π - π interactions, and hydrogen bonding. More importantly, the PMAL-CTS/MMT nanocomposite was successfully applied to separate the AY17 and BG dyes from real-life aquatic environments. Collectively, the simple fabrication and superior adsorption performance reveal that PMAL-CTS/MMT has the potential to treat concomitant organic dyes effectively.
Assuntos
Quitosana , Nanosferas , Adsorção , Ânions , Bentonita/química , Cátions , Quitosana/química , Corantes/química , Cinética , Maleatos , Compostos de Amônio QuaternárioRESUMO
In this study, four hybrid organic-inorganic compounds (8-H2Q)2[PdCl4] (1), (H2ClQ)2[PdCl4] (2), (H2NQ)2[PdCl4] (3) and (H2MeQ)2[PdCl4]·2H2O (4) (where 8-H2Q = 8-hydroxyquinolinium, H2ClQ = 5-chloro-8-hydroxyquinolinium, H2NQ = 5-nitro-8-hydroxyquinolinium and H2MeQ = 2-methyl-8-hydroxyquinolinium) were synthesized through organic cation modulation. Single-crystal X-ray structure analysis of compounds 1 and 3 indicates that their structures are planar and consist of [PdCl4]2- anions and 8-H2Q or H2NQ cations, respectively. Both ionic components are held together through ionic interactions and hydrogen bonds forming infinite chains linked through π-π interactions to form 2D structures. Furthermore, NMR spectroscopy, UV-Vis spectroscopy, elemental analysis, and FT-IR spectroscopy were used to explore the synthesized compounds. The DNA interaction, antimicrobial activity, antiproliferative activity, and radical scavenging effect of the compounds were evaluated. The hybrid compounds and their free ligands can interact with the calf thymus DNA via an intercalation mode involving the insertion of the aromatic chromophore between the base pairs of DNA; compound 1 has the highest binding affinity. Moreover, they have high antimicrobial efficacy against the tested 14 strains of microorganisms with minimum inhibitory concentration values ranging from <1.95 to 250 µg/mL. The antiproliferative activity of the compounds was investigated against three different cancer cell lines, and their selectivity was verified on mesenchymal stem cells. Compounds 1 and 2 displayed selective and high cytotoxicity against human lung and breast cancer cells and showed moderate cytotoxicity against colon cancer cells. Accordingly, they might be auspicious candidates for future pharmacological investigations in lung and breast cancer research.
Assuntos
Complexos de Coordenação/química , Hidroxiquinolinas/química , Paládio/química , Compostos de Quinolínio/química , Células A549 , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Antineoplásicos/farmacologia , Quelantes/química , Cristalografia por Raios X/métodos , DNA/química , Sequestradores de Radicais Livres/química , Células HCT116 , Humanos , Hidroxiquinolinas/síntese química , Ligantes , Espectroscopia de Ressonância Magnética/métodos , Testes de Sensibilidade Microbiana/métodos , Estrutura Molecular , Compostos de Quinolínio/síntese química , Espécies Reativas de Oxigênio/metabolismoRESUMO
Melamine and its analogues are illegally added to raise the apparent protein content in foods. The elevated concentrations of these compounds cause adverse effects in humans and animals. In this contribution, the protective effects of the synthesized starch-stabilized selenium nanoparticles (Se-NPs@starch) on melamine-induced hepato-renal toxicity have been systematically investigated. The Se-NPs@starch were characterized by X-ray photoelectron spectroscopy (XPS) analysis, energy dispersive spectroscopy (EDS) mapping analysis, TEM, and FT-IR. Starch plays a crucial role in the stabilization and dispersion of Se NPs, as noticed from the TEM and EDS investigations. Furthermore, the atomic ratio of Se distribution over the starch surface is approximately 1.67%. The current study was conducted on four groups of adult male rats, and the oral daily treatments for 28 days were as follows: group I served as control, group II received Se-NPs@starch, group III was exposed to melamine, while group IV was treated with melamine and Se-NPs@starch. The results reveal a significant alteration in the histoarchitecture of both hepatic and renal tissues induced by melamine. Furthermore, elevated liver and kidney function markers, high malondialdehyde, and increased expression levels of apoptosis-related genes besides a reduction in GSH and expression levels of antioxidant genes were observed in the melamine-exposed group. Interestingly, the administration of the Se-NPs@starch resulted in remarkable protection of rats against melamine-induced toxicity through increasing the antioxidant capacity and inhibiting oxidative damage. Collectively, this study provides affordable starch-stabilized Se-NPs with potent biological activity, making them auspicious candidates for prospective biomedical applications.
Assuntos
Doença Hepática Induzida por Substâncias e Drogas/prevenção & controle , Nanopartículas/química , Selênio/química , Amido/química , Triazinas/toxicidade , Animais , Apoptose , Doença Hepática Induzida por Substâncias e Drogas/tratamento farmacológico , Doença Hepática Induzida por Substâncias e Drogas/etiologia , Rim/efeitos dos fármacos , Rim/metabolismo , Fígado/efeitos dos fármacos , Fígado/metabolismo , Masculino , Nanopartículas/uso terapêutico , Estresse Oxidativo , RatosRESUMO
Applying a voltage to metal electrodes in contact with aqueous electrolytes results in the electrolysis of water at voltages above the decomposition voltage and plasma formation in the electrolyte at much higher voltages referred to as contact glow discharge electrolysis (CGDE). While several studies explore parameters that lead to changes in the I-U characteristics in this voltage range, little is known about the evolution of the structural properties of the electrodes. Here we study this aspect on materials essential to electrocatalysis, namely Pt, Au, and Cu. The stationary I-U characteristics are almost identical for all electrodes. Detailed structural characterization by optical microscopy, scanning electron microscopy, and electrochemical approaches reveal that Pt is stable during electrolysis and CGDE, while Au and Cu exhibit a voltage-dependent oxide formation. More importantly, oxides are reduced when the Au and Cu electrodes are kept in the electrolysis solution after electrolysis. We suspect that H2 O2 (formed during electrolysis) is responsible for the oxide reduction. The reduced oxides (which are also accessible via electrochemical reduction) form a porous film, representing a possible new class of materials in energy storage and conversion studies.
RESUMO
A new hydrazono-imidazoline modified cellulose (HIMC) was synthesized for selective recovery of Pt(IV), Pd(II) and Au(III) from geological samples. Cellulose was oxidized by periodate and was further functionalized with hydrazono-imidazoline moieties to afford N-donor chelating fibers. Scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N2 physisorption, elemental analysis, and energy-dispersive X-ray spectroscopy (EDX) were used for characterization. Introducing the hydrazono-imidazoline groups at the surface of cellulose fibers did not alert their ordered structure and crystallinity, as indicated by XRD and SEM results. Factors affecting the adsorption were systematically investigated. Under the optimized conditions, the HIMC sorbent exhibited high adsorption capacities of 105, 88 and 75â¯mgâ¯g-1 for Pt(IV), Pd(II) and Au(III), respectively. Besides, the metal ion adsorption process fitted by pseudo-second-order kinetic model and Langmuir adsorption isotherm. These results highlight the applicability of this carbohydrate-based sorbent for the selective recovery of precious metals from various matrices.
RESUMO
Silver nanoparticles (AgNPs) have become known as a broad-spectrum antimicrobial agent. The antimicrobial activity of AgNPs is dependent on the particle size and the dispersion status. In this study, a simple and effective approach is developed for sequestering the biosynthesized AgNPs in silica composites during the gel formation of MCM-41. Composites with different Ag concentrations of 0.034% (Ag1@MCM-41), 0.151% (Ag2@MCM-41), and 0.369% (Ag3@MCM-41) are synthesized and then heated at 400 °C to produce Ag1@MCM-41H, Ag2@MCM-41H, and Ag3@MCM-41H, respectively. The samples are characterized by flame atomic absorption spectrometry, Fourier-transform infrared spectroscopy, X-ray diffraction, N2 physisorption, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The AgNPs are confirmed to be highly dispersed in the amorphous silica framework. The antimicrobial activity of the AgNP-silica samples is investigated against Staphylococcus aureus, Escherichia coli, and Candida albicans using the cup-plate and the plate-count techniques. The results show an excellent antimicrobial effect of these samples against the studied microorganisms. Importantly, the AgNP-silica samples are found to be stable up to 58 months under ambient conditions. These stable and powerful antimicrobial composites provide a more practical and effective strategy for combating biomedical pathogens and public health threats.
RESUMO
A simple mixed-micelle mediated extraction was elaborated for the preconcentration and determination of scandium(III) by inductively coupled plasma optical emission spectrometry. Scandium(III) was complexed with Alizarin Red S and cetyltrimethylammonium bromide at pH 3 to form hydrophobic chelates, which could be extracted with Triton X-114 at room temperature (25°C) in the presence of KI as a salting-out electrolyte. The main parameters of the extraction procedure were investigated in regard to the extraction efficiency of scandium(III). Under the optimum conditions, a linear range of 0.5 - 150 ng mL(-1) and a detection limit of 0.2 ng mL(-1), along with a preconcentration factor of 100, were achieved. Furthermore, the interference of diverse ions accompanying scandium(III) was extensively studied. The obtained results indicate the high selectivity of the proposed procedure. The accuracy of the procedure was verified through recovery experiments on spiked water samples and synthetic mixtures. The procedure was successfully applied to a scandium(III) determination in clay samples.