Enhanced photocatalytic and antibacterial activities of novel Ag-HA bioceramic nanocatalyst for waste-water treatment.

Hydroxyapatite (HA), the most common bioceramic material, offers attractive properties as a catalyst support. Highly crystalline mono-dispersed silver doped hydroxyapatite (Ag-HA) nanorods of 60 nm length was developed via hydrothermal processing. Silver dopant offered enhanced chemisorption for crystal violet (CV) contaminant. Silver was found to intensify negative charge on the catalyst surface; in this regard enhanced chemisorption of positively charged contaminants was accomplished. Silver dopant experienced decrease in the binding energy of valence electron for oxygen, calcium, and phosphorous using X-ray photoelectron spectroscopy XPS/ESCA; this finding could promote electron-hole generation and light absorption. Removal efficiency of Ag-HA nanocomposite for CV reached 88% after the synergistic effect with 1.0 mM H2O2; silver dopant could initiate H2O2 cleavage and intensify the release of active È®H radicals. Whereas HA suffers from lack of microbial resistance; Ag-HA nanocomposite demonstrated high activity against Gram-positive (S. aureus) bacteria with zone of inhibition (ZOI) mm value of 18.0 mm, and high biofilm inhibition of 91.1%. Ag-HA nanocompsite experienced distinctive characerisitcs for utilization as green bioceramic photocatalyst for wastewater treatment.

Synergistic Interaction of Clusters of Iron Oxide Nanoparticles and Reduced Graphene Oxide for High Supercapacitor Performance.

Supercapacitors have been recognized as one of the more promising energy storage devices, with great potential use in portable electronics and hybrid vehicles. In this study, a composite made of clusters of iron oxide (Fe3O4-γFe2O3) nanoparticles and reduced graphene oxide (rGO) has been developed through a simple one-step solvothermal synthesis method for a high-performance supercapacitor electrode. Electrochemical assessment via cyclic voltammetry, galvanostatic charge-discharge experiments, and electrochemical impedance spectroscopy (EIS) revealed that the Fe3O4-γFe2O3/rGO nanocomposite showed much higher specific capacitance than either rGO or bare clusters of Fe3O4-γFe2O3 nanoparticles. In particular, specific capacitance values of 100 F g-1, 250 F g-1, and 528 F g-1 were obtained for the clusters of iron oxide nanoparticles, rGO, and the hybrid nanostructure, respectively. The enhancement of the electrochemical performance of the composite material may be attributed to the synergistic interaction between the layers of graphene oxide and the clusters of iron oxide nanoparticles. The intimate contact between the two phases eliminates the interface, thus enabling facile electron transport, which is key to attaining high specific capacitance and, consequently, enhanced charge-discharge time. Performance evaluation in consecutive cycles has demonstrated that the composite material retains 110% of its initial capacitance after 3000 cycles, making it a promising candidate for supercapacitors.

Tuning Electro-Magnetic Interference Shielding Efficiency of Customized Polyurethane Composite Foams Taking Advantage of rGO/Fe3O4 Hybrid Nanocomposites.

Electromagnetic interference (EMI) has been recognized as a new sort of pollution and can be considered as the direct interference of electromagnetic waves among electronic equipment that frequently affects their typical efficiency. As a result, shielding the electronics from this interfering radiation has been addressed as critical issue of great interest. In this study, different hybrid nanocomposites consisting of magnetite nanoparticles (Fe3O4) and reduced graphene oxide (rGO) as (conductive/magnetic) fillers, taking into account different rGO mass ratios, were synthesized and characterized by XRD, Raman spectroscopy, TEM and their magnetic properties were assessed via VSM. The acquired fillers were encapsulated in the polyurethane foam matrix with different loading percentages (wt%) to evaluate their role in EMI shielding. Moreover, their structure, morphology, and thermal stability were investigated by SEM, FTIR, and TGA, respectively. In addition, the impact of filler loading on their final mechanical properties was determined. The obtained results revealed that the Fe3O4@rGO composites displayed superparamagnetic behavior and acceptable electrical conductivity value. The performance assessment of the conducting Fe3O4@rGO/PU composite foams in EMI shielding efficiency (SE) was investigated at the X-band (8-12) GHz, and interestingly, an optimized value of SE -33 dBw was achieved with Fe3O4@rGO at a 80:20 wt% ratio and 35 wt% filler loading in the final effective PU matrix. Thus, this study sheds light on a novel optimization strategy for electromagnetic shielding, taking into account conducting new materials with variable filler loading, composition ratio, and mechanical properties in such a way as to open the door for achieving a remarkable SE.