Polarized Raman Study of Internal Vibrations of the Organic Cation in 3-Cyanopyridinium Lead Tribromide Post-perovskite.

In this work, we apply polarized Raman spectroscopy for study of internal vibrations of the 3-cyanopyridinium cation in the halide post-perovskite (3cp)PbBr3 (3cp = 3-CN-C5H5NH+). For a single cation, the vibrational frequencies and intensities of the Raman signal were calculated using the density functional theory. Selection rules were established for vibrations of cations in the crystal. These rules together with modeling results were used to identify the internal vibrations of the cation in the Raman spectrum of the crystal. Narrow and isolated internal vibrations of cations could be used as spectators of the crystalline environment.

Diffuse Reflectance Spectroscopy with Dilution: A Powerful Method for Halide Perovskites Study.

Halide perovskites and their low-dimensional analogs are promising semiconductor materials for solar cells, LEDs, lasers, detectors and other applications in the area of photonics. The most informative optical property of semiconductor photonics materials is the absorption spectrum enabling observation of the fundamental absorption edge, exciton structure, defect-related bands, etc. Traditionally, in the study of halide perovskites, this spectrum is obtained by absorption spectroscopy of thin films or diffuse reflectance spectroscopy of powders. The first method is applicable only to compounds with the developed thin film deposition technology, and in the second case, a large absorption coefficient narrows the observations down to the sample transparency region. In this paper, we suggest the diffuse reflectance spectroscopy with dilution as a method for obtaining the full-range absorption spectrum from halide perovskite powders, and demonstrate its application to practically important cases.

Effect of Cu2O Substrate on Photoinduced Hydrophilicity of TiO2 and ZnO Nanocoatings.

The effect of a Cu2O substrate on the photoinduced alteration of the hydrophilicity of TiO2 and ZnO surfaces was studied. It was demonstrated that the formation of heterostructures Cu2O/TiO2 and Cu2O/ZnO strongly changed the direction of the photoinduced alteration of surface hydrophilicity: while both TiO2 and ZnO demonstrate surface transition to superhydrophilic state under UV irradiation and no significant alteration of the surface hydrophilicity under visible light irradiation, the formation of Cu2O/TiO2 and Cu2O/ZnO heterostructures resulted in photoinduced decay of the surface hydrophilicity caused by both UV and visible light irradiation. All observed photoinduced changes of the surface hydrophilicity were compared and analyzed in terms of photoinduced alteration of the surface free energy and its polar and dispersive components. Alteration of the photoinduced hydrophilic behavior of TiO2 and ZnO surfaces caused by formation of the corresponding heterostructures with Cu2O are explained within the mechanism of electron transfer and increasing of the electron concentration on the TiO2 and ZnO surfaces.

Separation and Recombination of Photocarriers from Color Centers and Optically Silent Trap States from 100 to 450 K: The Halide Double Photochromic Perovskite Cs2AgBiBr6.

Compared to lead-based solar cells whose power conversion efficiency is 25.2%, the highest power conversion efficiency of a halide double Cs2AgBiBr6-based perovskite solar cell is less than 3%. It was therefore relevant to unravel the inherent reason(s) for such a low efficiency in the latter that may be related to trapping/detrapping of photocarriers. Accordingly, photocoloration and photobleaching phenomena occurring in the Cs2AgBiBr6 photochromic perovskite were examined from 100 to 450 K by diffuse reflectance spectroscopy (DRS). The separation and recombination of photogenerated charge carriers implicated both color centers and optically silent trap states within the bandgap. The processes were reversible subsequent to heating after illumination at 100 K but were mostly irreversible at 290 K. DRS spectral and kinetic measurements at T = 100-450 K were carried out after visible light illumination that further revealed the nature of the various charge carrier traps in Cs2AgBiBr6. Results confirmed the separation of photogenerated electrons and holes, with formation of the color centers identified as deep electron traps. Three different photoinduced color centers were responsible for the absorption bands observed at 1.78 (ab1), 1.39 (ab2), and 1.10 eV (ab3) at 100 K. Annealing of these electron-type color centers occurred in the temperature range of 100-450 K via recombination with holes in the valence band following their thermal release from the several hole traps. Application of a first-order kinetic model to the thermoprogrammed annealing (TPA) of the color centers' spectra yielded estimates of the activation energies of hole detrapping and lifetimes of trapped holes at room temperature. The irreversibility of photocoloration at 290 K was caused by the formation of new deep hole trap states.

Invalidity of Band-Gap Engineering Concept for Bi3+ Heterovalent Doping in CsPbBr3 Halide Perovskite.

Heterovalent CsPbBr3 doping with Bi results in a significant red shift of the optical absorption of both single-crystal and powdered samples. The results of low-temperature (3.6 K) photoluminescence studies of perovskite single crystals indicate that the position of the excitonic luminescence peak remains unaffected by Bi doping that, in turn, infers that the band gap of Bi-doped perovskite is not changed as well. The position and state density distribution of the valence band and Fermi level of single-crystal perovskites were determined by another direct method of ultraviolet photoelectron spectroscopy. The obtained results show that Bi3+ doping causes no changes in the valence band structure but an increase in the Fermi level by 0.6 eV. The summary of the obtained results directly demonstrates that the concept of the band-gap engineering in Bi3+-doped CsPbBr3 halide perovskite is not valid.

Low Inhomogeneous Broadening of Excitonic Resonance in MAPbBr3 Single Crystals.

We present an optical study of MAPbBr3 single crystal grown from solution. The crystal Pm3m symmetry was confirmed by electron backscatter diffraction. Our major attention was focused on optical effects related to the excitonic states in MAPbBr3. Photoluminescence temperature dependence of narrow exciton resonance showed encouragingly low inhomogeneous broadening Γ ≈ 0.5 meV that allows one to distinguish the signals from free excitons and those arising from recombination of excitons localized on defects. Excitonic origin of the resonance was proved by its superlinear pump intensity dependence, in contrast to the linear behavior of the defect-assisted recombination bands. For the first time, the phonon replicas originating from free exciton recombination accompanied by partial energy transfer to the phonons were observed in high-resolution PL spectra and confirmed by independent low-temperature Raman scattering experiments. In turn, low-temperature, low-frequency Raman scattering studies let us resolve the structure of the low-frequency phonon spectrum.

Water Will Be the Coal of the Future-The Untamed Dream of Jules Verne for a Solar Fuel.

This article evokes the futuristic visions of two giants, one a writer, Jules Verne, who foresaw water as the coal of the future, and the other a scientist, Giacomo Ciamician, who foresaw the utilization of solar energy as an energy source with which to drive photochemical and photocatalytic reactions for the betterment of mankind. Specifically, we examine briefly the early work of the 1960s and 1970s on the photosplitting of free water and water adsorbed on solid supports, based mostly on metal oxides, from which both hydrogen and oxygen evolve in the expected stoichiometric ratio of 2 to 1. The two oil crises of the 1970s (1973 and 1979) spurred the interest of researchers from various disciplines (photochemistry, photo-catalysis and photoelectrochemistry) in search of a Holy Grail photocatalyst, process, or strategy to achieve efficient water splitting so as to provide an energy source alternative to fossil fuels. Some approaches to the photosplitting of water adsorbed on solid insulators (high bandgap materials; Ebg ≥ 5 eV) and semiconductor photocatalysts (metal oxides) are described from which we deduce that metal oxides with bandgap energies around 5 eV (e.g., ZrO2) are more promising materials to achieve significant water splitting on the basis of quantum yields than narrower bandgap photocatalysts (e.g., TiO2; Ebg ≈ 3.0-3.2 eV), which tend to be relatively inactive by comparison. Although proof of concept of the photosplitting of water has been demonstrated repeatedly in the last four decades, much remains to be done to find the Holy Grail photocatalyst and/or strategy to achieve significant yields of hydrogen.

Sonochemical/hydration-dehydration synthesis of Pt-TiO2 NPs/decorated carbon nanotubes with enhanced photocatalytic hydrogen production activity.

Modified Pt-TiO2 NPs/decorated carbon nanotubes were synthesized utilizing sonochemical/hydration-dehydration techniques. Pt was loaded on TiO2 by a photodeposition method keeping in mind the end goal to achieve electron-hole pair separation and promote the surface reaction. The morphological and basic properties of Pt-TiO2/fCNTs were investigated by field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), powder X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL) and Raman spectroscopy. The selected area electron diffraction (SAED) patterns of Pt-TiO2/fCNTs were obtained utilizing TEM-based energy dispersive X-ray spectroscopy (EDXS) analysis. It was found that the TiO2 nanoparticles were uniformly distributed on the fCNTs, and the Pt particles were decorated on the surface of TiO2/fCNTs. The photocatalytic hydrogen production activity of the Pt(0.5%)-TiO2/fCNTs(0.5%) nanoparticle composites was investigated using a sacrificial agent methanol solution. Pt-loaded TiO2 demonstrated a hydrogen evolution rate around 20 times that of TiO2/fCNTs(0.5%) (fSWCNTs, fMWCNTs). When compared with platinized TiO2 in methanol, which was utilized as a control material, Pt-TiO2/fCNTs demonstrated an almost 2-fold increment in hydrogen generation.

Light-Controlled ZrO2 Surface Hydrophilicity.

In recent years many works are aimed at finding a method of controllable switching between hydrophilicity and hydrophobicity of a surface. The hydrophilic surface state is generally determined by its energy. Change in the surface energy can be realized in several different ways. Here we report the ability to control the surface wettability of zirconium dioxide nano-coatings by changing the composition of actinic light. Such unique photoinduced hydrophilic behavior of ZrO2 surface is ascribed to the formation of different active surface states under photoexcitation in intrinsic and extrinsic ZrO2 absorption regions. The sequential effect of different actinic lights on the surface hydrophilicity of zirconia is found to be repeatable and reversibly switchable from a highly hydrophilic state to a more hydrophobic state. The observed light-controllable reversible and reproducible switching of hydrophilicity opens new possible ways for the application of ZrO2 based materials.

Photoinduced hydrophilic conversion of hydrated ZnO surfaces.

Here we focused on the study of the effect of the zinc oxide nano-coatings surface acidity on the surface hydrophilicity and photoinduced hydrophilic conversion. A three-step procedure was used to have the initial state of the ZnO surface free of organics and to control the conditions during the water wetting and the irradiation steps. The kinetics of photoinduced hydrophilic conversions for ZnO films were obtained and demonstrated a dependence on the initial hydrophilic state. No conversion into the superhydrophilic state was observed for ZnO nano-films independently of the surface acidity. Irradiation in the ultraviolet and visible spectral regions showed the existence of "slow" and "fast" processes in the photoinduced hydrophilic conversion of the ZnO surface. A multi-layered model of hydroxyl-hydrated coverage of the surface is proposed to explain the experimental results.

Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties.

Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.

Fibrous TiO2-SiO2 nanocomposite photocatalyst.

The electrospinning method is employed to prepare a fibrous TiO2-SiO2 (Ti : Si = 1 : 2) nanocomposite photocatalyst, in which Degussa P25 T i O2 nanoparticles are embedded inthe body of SiO2 fibers and which shows good photocatalytic activity due to its 3-D open structure, as evidenced by photocatalytic reduction of silver ions and decomposition of acetaldehyde.

Photoelectrochemical behavior of Nb-doped TiO2 electrodes.

The photoelectrochemical behavior of degenerate Nb-doped TiO2 (Ti(1-x)Nb(x)O2: x = 0, 0.01, 0.03, 0.06, 0.1) electrodes prepared by pulsed laser deposition on LaAlO3 (LAO) and SrTiO3 (STO) was examined, revealing that an increase in Nb concentration causes a significant decay of titania photoactivity. One reason for such behavior may be a Burstein-Moss effect, which leads to a blue shift of the spectral limit of photoactivity. Another reason typical for metal-doped photocatalysts is the increase of the efficiency of charge carrier recombination.

An in vitro systematic spectroscopic examination of the photostabilities of a random set of commercial sunscreen lotions and their chemical UVB/UVA active agents.

The photostabilities of a random set of commercially available sunscreen lotions and their active ingredients are examined spectroscopically subsequent to simulated sunlight UV exposure. Loss of filtering efficacy can occur because of possible photochemical modifications of the sunscreen active agents. Changes in absorption of UVA/ UVB sunlight by agents in sunscreen lotions also leads to a reduction of the expected photoprotection of human skin and DNA against the harmful UV radiation. The active ingredients were investigated in aqueous media and in organic solvents of various polarities (methanol, acetonitrile, and n-hexane) under aerobic and anaerobic conditions The UV absorption features are affected by the nature of the solvents with properties closely related to oil-in-water (o/w) or water-in-oil (w/o) emulsions actually used in sunscreen formulations, and by the presence of molecular oxygen. The photostabilities of two combined chemical ingredients (oxybenzone and octyl methoxycinnamate) and the combination oxybenzone/titanium dioxide were also explored. In the latter case, oxybenzone undergoes significant photodegradation in the presence of the physical filter TiO2.