Katrina and the Thai Tsunami - water quality and public health aspects mitigation and research needs.

The South East Asian Tsunami in Thailand and Hurricane Katrina in the United States were natural disasters of different origin but of similar destruction and response. Both disasters exhibited synonymous health outcomes and similar structural damage from large surges of water, waves, and flooding. A systematic discussion and comparison of the disasters in Thailand and the Gulf Coast considers both calamities to be similar types of disaster in different coastal locations. Thus valuable comparisons can be made for improvements in response, preparedness and mitigation. Research needs are discussed and recommendations made regarding potential methologies. Recommendations are made to: (1) improve disaster response time in terms of needs assessments for public health and environmental data collection; (2) develop an access-oriented data sharing policy; and (3) prioritize natural geomorphic structures such as barrier islands, mangroves, and wetlands to help reduce the scale of future natural disasters. Based on the experiences gained opportunities to enhance disaster preparedness through research are presented.

Variability control: key to regulatory compliance and sustainability goals.

The focus of this paper is on variability concerns in wastewater treatment and approaches to control unacceptable fluctuations in effluent quality. Areas considered include: factors contributing to variability in both waste loads and process technology performance; variability assessment; control of variability employing the process best management practice (BMP); design/operation of biological waste treatment technologies for variability reduction; and modelling to enhance process control.

Comparison of E. coli, enterococci, and fecal coliform as indicators for brackish water quality assessment.

Escherichia coli (E. coli), enterococci, and fecal coliform data were collected and compared as potential indicators for swimmablility assessment of a brackish waterbody (Lake Pontchartrain, Louisiana). These indicators were measured during lake background conditions, in stormwater runoff (before dilution with lake water), and in the outfall plume within the lake following storm events. Microbial indicator titers associated with suspended particles and lake-bottom sediments were also investigated. Overall reduction rate constants for fecal coliform, E. coli, and enterococci in lake water and sediment were measured and reported. Attachment of microbial indicators to suspended matter and subsequent sedimentation appeared to be a significant fate mechanism. A slower reduction rate of indicator organisms in sediment further suggested that bottom sediment may act as a reservoir for prolonging indicator organism survival and added concern of recontamination of overlaying waters due to potential solids resuspension. Results indicated that enterococci might be a more stable indicator than E. coli and fecal coliform and, consequently, a more conservative indicator under brackish water conditions.

Bioremediation of methyl tertiary-butyl ether (MTBE) by an innovative biofilter.

Methyl tertiary-butyl ether (MTBE) is a synthetic chemical used in unleaded gasoline as an additive to reduce levels of ozone and carbon monoxide from auto exhaust. Due to its chemical and recalcitrant properties, MTBE has caused groundwater contamination worldwide. A laboratory-scale biofilter made of a natural fiber (kenaf) mat and inoculated with MTBE-degrading microorganisms, was evaluated for MTBE removal efficiency. Operational parameters of oxygen flow rate, hydraulic retention time (HRT), yeast extract and initial MTBE concentration were varied and MTBE removal efficiencies determined. Four kinetic models were evaluated to describe the MTBE removal in the reactor. Formaldehyde and tertiary butyl alcohol (the most two reported MTBE biodegradation byproducts) were not found in the effluent; instead, carbon dioxide was monitored as the end product based on the results of a metabolic mass balance evaluation. Toxicity of treated effluent was evaluated by employing the Microtox acute toxicity test and comparing that to the influent.

Evaluation of biomass production in unleaded gasoline and BTEX-fed batch reactors.

BTEX removal under aerobic conditions by unleaded gasoline acclimated biomass and BTEX acclimated biomass, and the effect of surfactant on BTEX biodegradation were evaluated. The effect of BTEX concentration as the sole source of carbon for biomass acclimation and the effect of yeast extract on cell growth in unleaded gasoline-fed reactors were also evaluated. For the unleaded gasoline acclimated biomass, benzene was shown the most recalcitrant among all BTEX, followed by o-xylene and toluene with 16-23%, 35-41% and 57-69% biodegradation, respectively. Ethylbenzene was consistently the fastest BTEX chemical removed with 99% biodegradation for the four bioreactor acclimated biomasses tested. For the 1,200 ppm BTEX acclimated biomass, benzene showed the highest removal efficiency (99%) among the four biomass environmental conditions tested, along with 99% toluene and 99% ethylbenzene biodegradation. O-xylene showed 92-94% removal. In all bioassays tested Tergitol NP-10 was fully removed, and did not have a substantial effect on BTEX biodegradation at the end of a 10-day evaluation.

An integrated treatability protocol for biotreatment/bioremediation of toxic pollutants generated by chemical industries.

To optimize the efficiency of bioremediation, treatability studies are needed to understand the fate of pollutants and environmental conditions under which microorganism growth is promoted and efficient degradation of these pollutants result. This article presents a recommended procedure which may achieve these goals. Results and treatability comparisons for candidate compounds including carbon tetrachloride (CT), methyl-tert-butyl-ether (MTBE) and hexachlorobutadiene (HCBD) are presented and discussed. Culture redox potential (ORP) which is an indicator or free electron activity of a system appeared to have a significant impact on CT biodegradation. Optimum biodegradation of CT by Pseudomonas cepacia was observed between -100 and -200mv. Under the optimum environmental conditions established during the batch-scale biotransformation study, 98 to 99.9% of CT and 70% of MTBE introduced into the continuous fixed-biofilm reactor were degraded. The biphasic model simulating biodegradation of CT and MTBE provided an excellent correlation in the fixed-biofilm study and was simple to apply as compared with other models.

A preliminary study on coastal water quality monitoring and modeling.

The overall objective of this study was to assess the impact of individual rainfall events on Lake Pontchartrain water quality and risk to swimmers. Indicator organisms in lake water under dry weather conditions, in storm water runoff (prior to dilution with lake water), and in the outfall plume within the lake following storm events were monitored and quantified. Results indicated that drainage canals constitute a significant microbial loading to lake waters. Significant reductions of indicator microbes are observed in the water column following two to three days after storm pumping events into the lake. A mathematical model incorporating advection, dispersion, and bacterial die-off gives fairly good prediction on E. coli, enterococcoi, and fecal coliform titers. The somewhat under estimation by model suggests re-suspension of sediment and re-introduction of the indicator organisms that attached to the sediment back into the water column. Future direction of model development should include the mechanism of re-suspension and survival of indicator organisms in sediment.

Findings of the Beijing 2000 IWA Chemical Industries Speciality Conference.

Critical Technologies to the World in the 21st Century: Pollution Control and Reclamation in Process Industries was a Chemical Industries Specialty Conference held in Beijing, China 18-22 September 2000. Set in China, the cradle of civilization, the conference hosted about 100 delegates from over twenty countries. Approximately 122 technical papers were presented covering a wide range of topic areas. This paper reviews significant findings presented. Perhaps the conference proceedings will serve as a point of reference for future evaluations and accomplishments. The 21st century offers both challenges and opportunities for progress towards sustainable development/production in the process industries. International cooperation and inter-disciplinary collaboration are essential for this goal to be realized.

Biosolids management--sustainable development status and future direction.

The role of biosolids management continues to gain priority in terms of holistic waste management/reuse. Recommended options should lead to simple and safe management alternatives that stress reclamation of resources. This paper addresses current sustainability strategies, priorities and future direction of waste management as it relates to residuals and in particular to sludges/biosolids. Sludge management and resource recovery approaches must be diversified and flexible. They should be based on actual needs of the affected society and community. It is also important that the chosen strategy be appropriate to the conditions of the site under consideration. Processes which promote sustainability will become viable options for resource management if conversion into a "value-added product" can be realized.

The influence of selected environmental parameters on the toxicity of Bayluscide to Schistosoma mansoni miracidia.

Laboratory studies were conducted to investigate the influence of selected environmental parameters on the toxicity of Bayluscide to Schistosoma mansoni miracidia. Test results indicated that temperature, pH, hardness and salinity of the water exerted profound effects on miracidial survival and that the miracidicidal action of bayluscide was highly influenced by these factors. In summary, this chemical was found to be more effective in killing the miracidia of S. mansoni in waters of higher temperatures, lower values of pH (acidic waters), lower degrees of hardness (soft waters) and lower levels of salt (freshwaters). The implications of such studies in the control of schistosomiasis transmission are addressed.

Toxicity evaluation of Bayluscide and malathion to three developmental stages of freshwater snails.

Laboratory studies were conducted to assess the conditions under which the use of malathion in ricelands of Cameroon may impact the transmission of schistosomiasis. Helisoma trivolvis and Biomphalaria havanensis were selected as test organisms due to the lack of intermediate snail hosts in the U.S. Using Bayluscide as a reference molluscicidal compound, malathion was tested against snail eggs, juveniles, and adults. Snail eggs were more susceptible to Bayluscide and malathion than juvenile snails which in turn were more susceptible than adult snails. A Bayluscide concentration of 0.200 mg/L caused 100% mortality to adults of both snail species after 24 h exposure. This relatively high toxicity of Bayluscide to freshwater snails is one of the reasons why it has been recommended by the World Health Organization as the molluscicide of choice for control of schistosome-bearing snails. The concentrations of malathion resulting in 100% kill of adult snails after 24 h exposure were 1,200 mg/L for H. trivolvis and 500 mg/L for B. havanensis. After 48 h exposure, these concentrations were reduced to 500 mg/L and 300 mg/L, respectively. Therefore it is expected that the use of malathion for insect control in ricelands of Cameroon may affect the survival of freshwater snails including the intermediate hosts of bilharziasis.

Toxicity evaluation of ammonium sulphate and urea to three developmental stages of freshwater snails.

Studies were performed to evaluate the toxic effects of ammonium sulphate and urea (chemical fertilizers currently applied in ricelands of Cameroon) against eggs, juveniles, and adults of two species of freshwater snails (Helisoma trivolvis and Biomphalaria havanensis). Results obtained from ammonium sulphate tests indicated 24-h LC50 values of 558 mg/L and 669 mg/L for eggs; 393 mg/L and 526 mg/L for juveniles, and 701 mg/L and 657 mg/L for adults of H. trivolvis and B. havanensis, respectively. Similar analysis with urea revealed LC50 values of 14,241 mg/L and 13,532 mg/L for eggs; 18,255 mg/L and 24,504 mg/L for juveniles and 30,060 mg/L and 26,024 mg/L for adults of H. trivolvis and B. havanensis, respectively. Following 48 h exposure, the concentrations of ammonium sulphate killing 100% of snails were 1,250 mg/L and 1,000 mg/L for the adults of H. trivolvis and of B. havanensis, respectively. Those of urea were computed to be 25,000 mg/L for H. trivolvis and 35,000 mg/L for B. havanensis. In rice culture in Cameroon, these fertilizers are applied at doses of 100 kg/ha (ammonium sulphate) and of 150 kg/ha (urea); hence, the above found concentrations lethal to snails appeared to be 10 to 13 times (ammonium sulphate) and to be 165 to 235 times (urea) higher assuming an average water depth of 10 cm in these ricefields. Therefore, the use of ammonium sulphate and urea as chemical fertilizers in ricelands of the Republic of Cameroon might adversely affect the survival of freshwater snails only in the case of spills or of stressful environmental conditions. Under normal laboratory conditions, both chemicals show a low molluscicidal activity with urea being about 25 to 35 times less potent than ammonium sulphate.

The effects of ammonium sulphate and urea upon egg hatching and miracidial survival of Schistosoma mansoni.

The effects of various concentrations of ammonium sulphate and urea on egg hatching and miracidial survival of S. mansoni were tested in order to determine if the use of these fertilizers in the ricelands of the Republic of Cameroon could affect the transmission of schistosomiasis. Results indicate that hatching of eggs and survival of miracidia varied with concentrations of tested chemicals and times of exposure. Exposure of S. mansoni eggs to 0.20%-1.00% ammonium sulphate or to 0.50%-4.00% urea reduced their ability to hatch and produce miracidia. A chemical concentration of 1.00% ammonium sulphate or 4.00% urea was found to be sufficient to produce complete inhibition of hatching. High concentrations of both chemicals not only inhibited miracidial emergence but also may be ovocidal. Results obtained from miracidial survival tests indicated that LC5, LC50 and LC95 values for ammonium sulphate were 0.07%, 0.80% and 10.61% after 2 hours of exposure; 0.03%, 0.16% and 0.90% after 4 hours of exposure; and 0.30%, 0.20% and 0.40% after 6 hours of exposure respectively. Similar statistical analyses revealed that the LC5, LC50 and LC95 values for urea were 0.22%, 1.90% and 16.25% after 2 hours of exposure; 0.28%, 0.57% and 1.14% after 4 hours of exposure; and 0.13%, 0.27% and 0.57% after 6 hours of exposure respectively. Although the two fertilizers exerted some adverse effects on S. mansoni eggs and miracidia at relatively high concentrations, neither of them was found to be of practical value. Ammonium sulphate and urea concentrations effective in killing S. mansoni eggs and miracidia were about one to two orders of magnitude greater than the actual field application rates.

The effects of bayluscide and malathion on the survival of Schistosoma mansoni miracidia.

Laboratory experiments were conducted to assess the toxic effects of bayluscide and malathion against Schistosoma mansoni miracidia. The results indicate that survival of miracidia varied with times of exposure and concentrations of tested chemicals. Statistical analyses reveal that LC5, LC50 and LC95 for bayluscide were 0.04 ppm, 0.06 ppm and 0.12 ppm after 2 hours of exposure; 0.02 ppm, 0.03 ppm and 0.06 ppm after 4 hours of exposure; and 0.01 ppm, 0.02 ppm and 0.04 ppm after 6 hours of exposure respectively. These data indicate that bayluscide is much more toxic to the first stage larvae of schistosomes than to snail intermediate hosts cited in the literature. Application of lower concentrations of molluscicide in the transmission sites is thus expected to curtail the survival of miracidia; therefore controlling schistosomiasis at relatively low costs. Such applications also reduce the risk of toxicity to non target organisms present in the aquatic environment. Statistical analysis of the results of tests using malathion gave LC5, LC50 and LC95 values of 83.38 ppm, 153.11 ppm and 245.85 ppm after 2 hours of exposure; and 76.86 ppm, 116.48 ppm and 172.04 ppm after 4 hours of exposure respectively. These data indicate that the use of malathion as an insecticide in tropical ecosystems may also affect the survival and viability of schistosome miracidia. Such uses could help reducing the risk of schistosomiasis transmission in these particular locations.

A new method for determining concentrations of Endod-S (Phytolacca dodecandra) in water during mollusciciding.

A hemolytic method was developed for the quantitative determination of oleanane saponin (Endod-S) in Phytolacca dodecandra (Phytolaccaceae), a plant with potent molluscicidal properties. A chemical method based on thin-layer chromatography (TLC) was used as a control for comparison with a hemolysis test. Standard curves for calibration of both tests of Endod-S gave high correlation coefficients. The hemolysis method gave a correlation coefficient of 0.98 for saponin (Endod-S) levels ranging from 1.6 to 4.2 mg/l. The TLC method gave a correlation coefficient of 0.99 for saponin levels above 1.5 micrograms. Due to the action of saponins on erythrocytes, the hemolysis method could not be used at levels below 1.6 and above 4.2 mg/l. Similarly, sample size limited TLC quantitation of these saponins at levels below 1 microgram. Both the TLC and the hemolysis methods on identical Endod-S water samples gave comparable results at saponin levels between 2 and 6 mg/l. A snail bioassay showed that the LC50 and the LC90 concentrations of Endod-S to the snail Biomphalaria glabrata (albino) were 2.57 and 2.92 mg/l respectively. These values fell in the standard curve range for the hemolysis method thus indicating that the hemolysis method is of practical value for testing Endod-S concentrations that would actually be used in field applications for snail control. The hemolysis method is less expensive than TLC and can be easily adapted to field conditions.

Biotransformation of the pesticide sodium arsenate.

Biotransformation is an important parameter in assessing the environmental impact and fate of pesticides since metabolites produced may be either more or less toxic than the parent compound. Sodium arsenate (+5 inorganic), the wood preservative and insecticide, may be converted to both inorganic (+3) and organic compounds (-3) by microorganisms in soil, sediment and water bodies. Biotransformation of sodium arsenate was studied in pure cultures of 5 bacterial species using a mineral salt and limited carbon source medium. Arsenate concentrations were 10 microgram/ml and 100 microgram/ml of arsenic respectively. The rate of biodegradation of the parent compound was described by a first order composite exponential equation of the form Ct = C1e-k1t+C2e-k2t. Rates of production of metabolites (arsenite, monomethylarsine, dimethylarsine and trimethylarsine) were described by a first order exponential equation of the form Ct = Co (1-e-kt).