RESUMO
Background: Endoscopic endonasal surgery is an established minimally invasive technique for resecting pituitary adenomas. However, understanding orientation and identifying critical neurovascular structures in this anatomically dense region can be challenging. In clinical practice, commercial navigation systems use a tracked pointer for guidance. Augmented Reality (AR) is an emerging technology used for surgical guidance. It can be tracker based or vision based, but neither is widely used in pituitary surgery. Methods: This pre-clinical study aims to assess the accuracy of tracker-based navigation systems, including those that allow for AR. Two setups were used to conduct simulations: (1) the standard pointer setup, tracked by an infrared camera; and (2) the endoscope setup that allows for AR, using reflective markers on the end of the endoscope, tracked by infrared cameras. The error sources were estimated by calculating the Euclidean distance between a point's true location and the point's location after passing it through the noisy system. A phantom study was then conducted to verify the in-silico simulation results and show a working example of image-based navigation errors in current methodologies. Results: The errors of the tracked pointer and tracked endoscope simulations were 1.7 and 2.5 mm respectively. The phantom study showed errors of 2.14 and 3.21 mm for the tracked pointer and tracked endoscope setups respectively. Discussion: In pituitary surgery, precise neighboring structure identification is crucial for success. However, our simulations reveal that the errors of tracked approaches were too large to meet the fine error margins required for pituitary surgery. In order to achieve the required accuracy, we would need much more accurate tracking, better calibration and improved registration techniques.
RESUMO
BACKGROUND: Powered wheelchairs are an essential technology to support mobility, yet their use is associated with a high level of sedentarism that can have negative health effects for their users. People with Duchenne muscular dystrophy (DMD) start using a powered wheelchair in their early teens due to the loss of strength in their legs and arms. There is evidence that low-intensity exercise can help preserve the functional abilities of people with DMD, but options for exercise when sitting in a powered wheelchair are limited. METHODS: In this paper, we present the design and the feasibility study of a new version of the MOVit device that allows powered-wheelchair users to exercise while driving the chair. Instead of using a joystick to drive the wheelchair, users move their arms through a cyclical motion using two powered, mobile arm supports that provide controller inputs to the chair. The feasibility study was carried out with a group of five individuals with DMD and five unimpaired individuals. Participants performed a series of driving tasks in a wheelchair simulator and on a real driving course with a standard joystick and with the MOVit 2.0 device. RESULTS: We found that driving speed and accuracy were significantly lowered for both groups when driving with MOVit compared to the joystick, but the decreases were small (speed was 0.26 m/s less and maximum path error was 0.1 m greater). Driving with MOVit produced a significant increase in heart rate (7.5 bpm) compared to the joystick condition. Individuals with DMD reported a high level of satisfaction with their performance and comfort in using MOVit. CONCLUSIONS: These results show for the first time that individuals with DMD can easily transition to driving a powered wheelchair using cyclical arm motions, achieving a reasonable driving performance with a short period of training. Driving in this way elicits cardiopulmonary exercise at an intensity found previously to produce health-related benefits in DMD.
