Optimization of paper mill industry wastewater treatment by electrocoagulation and electro-Fenton processes using response surface methodology.

This study deals with chemical oxygen demand (COD), phenol and Ca+2 removal from paper mill industry wastewater by electrocoagulation (EC) and electro-Fenton (EF) processes. A response surface methodology (RSM) approach was employed to evaluate the effects and interactions of the process variables and to optimize the performance of both processes. Significant quadratic polynomial models were obtained (R2 = 0.959, R2 = 0.993 and R2 = 0.969 for COD, phenol and Ca+2 removal, respectively, for EC and R2 = 0.936, R2 = 0.934 and R2 = 0.890 for COD, phenol and Ca+2 removal, respectively). Numerical optimization based on desirability function was employed; in a 27.55 min trial, 34.7% of COD removal was achieved at pH 9 and current density 96 mA/cm2 for EC, whereas in a 30 min trial, 74.31% of COD removal was achieved at pH 2 and current density 96 mA/cm2 and H2O2/COD molar ratio 2.0 for EF. The operating costs were calculated to be 6.44 €/m3 for EC and 7.02 €/m3 for EF depending on energy and electrode consumption at optimum conditions. The results indicate that the RSM is suitable for the design and optimization of both of the processes. However, EF process was a more effective technology for paper mill industry wastewater treatment as compared with EC.

The investigation of paper mill industry wastewater treatment and activated sludge properties in a submerged membrane bioreactor.

The paper mill industry produces high amounts of wastewater and, for this reason, stringent discharge limits are applied for sustainable reclamation and reuse of paper mill industry wastewater in many countries. Submerged membrane bioreactor (sMBR) systems can create new opportunities to eliminate dissolved substances present in paper mill wastewater including. In this study, a sMBR was operated for the treatment of paper mill industry wastewater at 35 h of hydraulic retention time (HRT) and 40 d of sludge retention time (SRT). The chemical oxygen demand (COD), NH3-N and total phosphorus (TP) removal efficiencies were found to be 98%, 92.99% and 96.36%. The results demonstrated that sMBR was a suitable treatment for the removal of organic matter and nutrients for treating paper mill wastewater except for the problem of calcium accumulation. During the experimental studies, it was noted that the inorganic fraction of the sludge increased as a result of calcium accumulation in the reactor and increased membrane fouling was observed on the membrane surface due to the calcification problem encountered. The properties of the sludge, such as extracellular polymeric substances (EPS) and soluble microbial products (SMP), relative hydrophobicity, zeta potential and floc size distribution were also monitored. According to the obtained results, the total EPS was found to be 43.93 mg/gMLSS and the average total SMP rejection by the membrane was determined as 66.2%.

Effect of carbon to nitrogen ratio of feed wastewater and sludge retention time on activated sludge in a submerged membrane bioreactor.

This paper investigated the effects of extracellular polymeric substances (EPS) on the activated sludge rheology in a submerged membrane bioreactor (sMBR) operated at different sludge retention time (SRT) values and different carbon to nitrogen ratios (C/N) of feed wastewater. The C/N ratios of the feed were adjusted accordingly so that synthetic wastewaters prepared simulated municipal wastewater, non-toxic wastewater with high C/N ratio and non-toxic wastewater with low C/N ratio. A number of important operational parameters such as mixed liquor suspended solid (MLSS), protein fraction of EPS (EPSp), carbohydrate fraction of EPS (EPSc), protein fraction of soluble microbial product (SMPp), carbohydrate fraction of SMP (SMPc), apparent viscosity, critical flux and hydrophobicity in mixed liquor and their correlations were investigated in the sMBR systems operated. The statistical analysis indicated that the C/N ratio of feed, SRT, MLSS and SMPc were found to have positive effects on apparent viscosity at three different shear rates. On the other hand, a negative impact was detected between the apparent viscosities and the critical fluxes. It was also observed that there is a significant positive correlation between hydrophobicity and both EPSp and SMPp.