Efficient large-scale single-step evaluations and indirect genomic prediction of genotyped selection candidates.

BACKGROUND: Single-step genomic best linear unbiased prediction (ssGBLUP) models allow the combination of genomic, pedigree, and phenotypic data into a single model, which is computationally challenging for large genotyped populations. In practice, genotypes of animals without their own phenotype and progeny, so-called genotyped selection candidates, can become available after genomic breeding values have been estimated by ssGBLUP. In some breeding programmes, genomic estimated breeding values (GEBV) for these animals should be known shortly after obtaining genotype information but recomputing GEBV using the full ssGBLUP takes too much time. In this study, first we compare two equivalent formulations of ssGBLUP models, i.e. one that is based on the Woodbury matrix identity applied to the inverse of the genomic relationship matrix, and one that is based on marker equations. Second, we present computationally-fast approaches to indirectly compute GEBV for genotyped selection candidates, without the need to do the full ssGBLUP evaluation. RESULTS: The indirect approaches use information from the latest ssGBLUP evaluation and rely on the decomposition of GEBV into its components. The two equivalent ssGBLUP models and indirect approaches were tested on a six-trait calving difficulty model using Irish dairy and beef cattle data that include 2.6 million genotyped animals of which about 500,000 were considered as genotyped selection candidates. When using the same computational approaches, the solving phase of the two equivalent ssGBLUP models showed similar requirements for memory and time per iteration. The computational differences between them were due to the preprocessing phase of the genomic information. Regarding the indirect approaches, compared to GEBV obtained from single-step evaluations including all genotypes, indirect GEBV had correlations higher than 0.99 for all traits while showing little dispersion and level bias. CONCLUSIONS: In conclusion, ssGBLUP predictions for the genotyped selection candidates were accurately approximated using the presented indirect approaches, which are more memory efficient and computationally fast, compared to solving a full ssGBLUP evaluation. Thus, indirect approaches can be used even on a weekly basis to estimate GEBV for newly genotyped animals, while the full single-step evaluation is done only a few times within a year.

A computationally efficient method for approximating reliabilities in large-scale single-step genomic prediction.

BACKGROUND: In this study, computationally efficient methods to approximate the reliabilities of genomic estimated breeding values (GEBV) in a single-step genomic prediction model including a residual polygenic (RPG) effect are described. In order to calculate the reliabilities of the genotyped animals, a single nucleotide polymorphism best linear unbiased prediction (SNPBLUP) or a genomic BLUP (GBLUP), was used, where two alternatives to account for the RPG effect were tested. In the direct approach, the genomic model included the RPG effect, while in the blended method, it did not but an index was used to weight the genomic and pedigree-based BLUP (PBLUP) reliabilities. In order to calculate the single-step GBLUP reliabilities for the breeding values for the non-genotyped animals, a simplified weighted-PBLUP model that included a general mean and additive genetic effects with weights accounting for the non-genomic and genomic information was used. We compared five schemes for the weights. Two datasets, i.e., a small (Data 1) one and a large (Data 2) one were used. RESULTS: For the genotyped animals in Data 1, correlations between approximate reliabilities using the blended method and exact reliabilities ranged from 0.993 to 0.996 across three lactations. The slopes observed by regressing the reliabilities of GEBV from the exact method on those from the blended method were 1.0 for all three lactations. For Data 2, the correlations and slopes ranged, respectively, from 0.980 to 0.986 and from 0.91 to 0.96, and for the non-genotyped animals in Data 1, they ranged, respectively, from 0.987 to 0.994 and from 0.987 to 1, which indicate that the approximations were in line with the exact results. The best approach achieved correlations of 0.992 to 0.994 across lactations. CONCLUSIONS: Our results demonstrate that the approximated reliabilities calculated using our proposed approach are in good agreement with the exact reliabilities. The blended method for the genotyped animals is computationally more feasible than the direct method when RPG effects are included, particularly for large-scale datasets. The approach can serve as an effective strategy to estimate the reliabilities of GEBV in large-scale single-step genomic predictions.

Invited review: Reliability computation from the animal model era to the single-step genomic model era.

The calculation of exact reliabilities involving the inversion of mixed model equations poses a heavy computational challenge when the system of equations is large. This has prompted the development of different approximation methods. We give an overview of the various methods and computational approaches in calculating reliability from the era before the animal model to the era of single-step genomic models. The different methods are discussed in terms of modeling, development, and applicability in large dairy cattle populations. The paper also describes the problems faced in reliability computation. Many details dispersed throughout the literature are presented in this paper. It is clear that a universal solution applicable to every model and input data may not be possible, but we point out several efficient and accurate algorithms developed recently for a variety of very large genomic evaluations.

Single-step genomic BLUP with many metafounders.

Single-step genomic BLUP (ssGBLUP) model for routine genomic prediction of breeding values is developed intensively for many dairy cattle populations. Compatibility between the genomic (G) and the pedigree (A) relationship matrices remains an important challenge required in ssGBLUP. The compatibility relates to the amount of missing pedigree information. There are two prevailing approaches to account for the incomplete pedigree information: unknown parent groups (UPG) and metafounders (MF). unknown parent groups have been used routinely in pedigree-based evaluations to account for the differences in genetic level between groups of animals with missing parents. The MF approach is an extension of the UPG approach. The MF approach defines MF which are related pseudo-individuals. The MF approach needs a Γ matrix of the size number of MF to describe relationships between MF. The UPG and MF can be the same. However, the challenge in the MF approach is the estimation of Γ having many MF, typically needed in dairy cattle. In our study, we present an approach to fit the same amount of MF as UPG in ssGBLUP with Woodbury matrix identity (ssGTBLUP). We used 305-day milk, protein, and fat yield data from the DFS (Denmark, Finland, Sweden) Red Dairy cattle population. The pedigree had more than 6 million animals of which 207,475 were genotyped. We constructed the preliminary gamma matrix (Γ pre ) with 29 MF which was expanded to 148 MF by a covariance function (Γ 148). The quality of the extrapolation of the Γ pre matrix was studied by comparing average off-diagonal elements between breed groups. On average relationships among MF in Γ 148 were 1.8% higher than in Γ pre . The use of Γ 148 increased the correlation between the G and A matrices by 0.13 and 0.11 for the diagonal and off-diagonal elements, respectively. [G]EBV were predicted using the ssGTBLUP and Pedigree-BLUP models with the MF and UPG. The prediction reliabilities were slightly higher for the ssGTBLUP model using MF than UPG. The ssGBLUP MF model showed less overprediction compared to other models.

Local breed proportions and local breed heterozygosity in genomic predictions for crossbred dairy cows.

For genomic prediction of crossbred animals, models that account for the breed origin of alleles (BOA) in marker genotypes can allow the effects of marker alleles to differ depending on their ancestral breed. Previous studies have shown that genomic estimated breeding values for crossbred cows can be calculated using the marker effects that are estimated in the contributing pure breeds and combined based on estimated BOA in the genotypes of the crossbred cows. In the presented study, we further exploit the BOA information for improving the prediction of genomic breeding values of crossbred dairy cows. We investigated 2 types of BOA-derived breed proportions: global breed proportions, defined as the proportion of marker alleles assigned to each breed across the whole genome; and local breed proportions (LBP), defined as the proportions of alleles on chromosome segments which were assigned to each breed. Further, we investigated 2 BOA-derived measures of heterozygosity for the prediction of total genetic value. First, global breed heterozygosity, defined as the proportion of marker loci that have alleles originating in 2 different breeds over the whole genome. Second, local breed heterozygosity (LBH), defined as proportions of marker loci on chromosome segments that had alleles originating in 2 different breeds. We estimated variance related to LBP and LBH on the remaining variation after accounting for prediction with solutions from the genomic evaluations of the pure breeds and validated alternative models for production traits in 5,214 Danish crossbred dairy cows. The estimated LBP variances were 0.9, 1.2, and 1.0% of phenotypic variance for milk, fat, and protein yield, respectively. We observed no clear LBH effect. Cross-validation showed that models with LBP effects had a numerically small but statistically significantly higher predictive ability than models only including global breed proportions. We observed similar improvement in accuracy by the model having an across crossbred residual additive genetic effect, accounting for the additive genetic variation that was not accounted for by the solutions from purebred. For genomic predictions of crossbred animals, estimated BOA can give useful information on breed proportions, both globally in the genome and locally in genome regions, and on breed heterozygosity.

Near Infrared Light Induced Radical Polymerization in Water.

We introduce a gold nanorod (AuNR) driven methodology to induce free radical polymerization in water with near infrared light (800 nm). The process exploits photothermal conversion in AuNR and subsequent heat transfer to a radical initiator (here azobisisobutyronitrile) for primary radical generation. A broad range of reaction conditions were investigated, demonstrating control over molecular weight and reaction conversion of dimethylacrylamide polymers, using nuclear magnetic resonance spectroscopy. We underpin our experimental data with finite element simulation of the spatio-temporal temperature profile surrounding the AuNR directly after femtosecond laser pulse excitation. Critically, we evidence that polymerization can be induced through biological tissues given the enhanced penetration depth of the near infrared light. We submit that the presented initiation mechanism in aqueous systems holds promise for radical polymerization in biological environments, including cells.

Single-step genomic BLUP with genetic groups and automatic adjustment for allele coding.

BACKGROUND: Genomic estimated breeding values (GEBV) by single-step genomic BLUP (ssGBLUP) are affected by the centering of marker information used. The use of a fixed effect called J factor will lead to GEBV that are unaffected by the centering used. We extended the use of a single J factor to a group of J factors. RESULTS: J factor(s) are usually included in mixed model equations (MME) as regression effects but a transformation similar to that regularly used for genetic groups can be applied to obtain a simpler MME, which is sparser than the original MME and does not need computation of the J factors. When the J factor is based on the same structure as the genetic groups, then MME can be transformed such that coefficients for the genetic groups no longer include information from the genomic relationship matrix. We illustrate the use of J factors in the analysis of a Red dairy cattle data set for fertility. CONCLUSIONS: The GEBV from these analyses confirmed the theoretical derivations that show that the resulting GEBV are allele coding independent when a J factor is used. Transformed MME led to faster computing time than the original regression-based MME.

Breeding value reliabilities for multiple-trait single-step genomic best linear unbiased predictor.

Approximate multistep methods to calculate reliabilities for estimated breeding values in large genetic evaluations were developed for single-trait (ST-R2A) and multitrait (MT-R2A) single-step genomic BLUP (ssGBLUP) models. First, a traditional animal model was used to estimate the amount of nongenomic information for the genotyped animals. Second, this information was used with genomic data in a genomic BLUP model (genomic BLUP/SNP-BLUP) to approximate the total amount of information and ssGBLUP reliabilities for the genotyped animals. Finally, reliabilities for the nongenotyped animals were calculated using a traditional animal model where the increased information due to genomic data for the genotyped animals is accounted for by including pseudo-record counts for the genotyped animals. The approaches were tested using a multiple-trait ssGBLUP model on 2 data sets. The first data set (data 1) was small enough such that exact ssGBLUP model reliabilities could be computed by inversion and compared with the approximation method reliabilities. Data 1 had 46,535 first-, 35,290 second-, and 23,780 third-lactation 305-d milk yield records from 47,124 Finnish Red dairy cows. The pedigree comprised 64,808 animals, of which 19,757 were genotyped. We examined the efficiency of the MT-R2A approximation on a large data set (data 2) derived from the joint Nordic (Danish, Finnish, and Swedish) Holstein dairy cattle data. Data 2 had 17.8 million 305-d milk records from 8.3 million cows and first 3 lactations. The pedigree had 11 million animals of which 274,145 were genotyped on 46,342 SNP markers. For data 1, correlations between the exact ssGBLUP model and the ST-R2A for the genotyped (nongenotyped) animals were 0.995 (0.987), 0.965 (0.984), and 0.950 (0.983) for first, second, and third lactation, respectively. Correspondingly, correlations between exact ssGBLUP reliabilities and MT-R2A for the genotyped (nongenotyped) animals were 0.995 (0.993), 0.992 (0.991), and 0.990 (0.990) for first, second, and third lactation, respectively. The regression coefficients (b1) of ssGBLUP reliability on ST-R2A for the genotyped (nongenotyped) animals ranged from 0.87 (0.94) for first lactation to 0.68 (0.93) for third lactation, whereas for MT-R2A they were between 0.91 (0.99) for first lactation to 0.89 (0.99) for third lactation. Correspondingly, the intercepts varied from 0.11 (0.05) to 0.3 (0.06) for ST-R2A and from 0.06 (0.01) to 0.07 (0.02) for MT-R2A. The computing time for the approximation method was approximately 12% of that required by the direct exact approach. In conclusion, the developed approximate approach allows calculating estimated breeding value reliabilities in the ssGBLUP model even for large data sets.

Single-step genomic evaluation of Russian dairy cattle using internal and external information.

Genomic data are widely used in predicting the breeding values of dairy cattle. The accuracy of genomic prediction depends on the size of the reference population and how related the candidate animals are to it. For populations with limited numbers of progeny-tested bulls, the reference populations must include cows and data from external populations. The aim of this study was to implement state-of-the-art single-step genomic evaluations for milk and fat yield in Holstein and Russian Black & White cattle in the Leningrad region (LR, Russia), using only a limited number of genotyped animals. We complemented internal information with external pseudo-phenotypic and genotypic data of bulls from the neighbouring Danish, Finnish and Swedish Holstein (DFS) population. Three data scenarios were used to perform single-step GBLUP predictions in the LR dairy cattle population. The first scenario was based on the original LR reference population, which constituted 1,080 genotyped cows and 427 genotyped bulls. In the second scenario, the genotypes of 414 bulls related to the LR from the DFS population were added to the reference population. In the third scenario, LR data were further augmented with pseudo-phenotypic data from the DFS population. The inclusion of foreign information increased the validation reliability of the milk yield by up to 30%. Suboptimal data recording practices hindered the improvement of fat yield. We confirmed that the single-step model is suitable for populations with a low number of genotyped animals, especially when external information is integrated into the evaluations. Genomic prediction in populations with a low number of progeny-tested bulls can be based on data from genotyped cows and on the inclusion of genotypes and pseudo-phenotypes from the external population. This approach increased the validation reliability of the implemented single-step model in the milk yield, but shortcomings in the LR data recording scheme prevented improvements in fat yield.

Trehalose supplementation enhanced the biocontrol efficiency of Sporidiobolus pararoseus Y16 through increased oxidative stress tolerance and altered transcriptome.

BACKGROUND: In the process of biological control, the antagonistic yeasts contend with various stresses that negatively influence yeasts' biocontrol efficiency. In the current study, we investigated the effect of trehalose supplementation on the biocontrol efficiency and oxidative stress tolerance of Sporidiobolus pararoseus Y16. RESULTS: S. pararoseus Y16, an antagonistic yeast cultured in trehalose supplemented medium, exhibited better biocontrol efficiency against Penicillium expansum and Aspergillus tubingensis in table grapes. Trehalose-treated S. pararoseus Y16 cells showed good proliferation efficiency and oxidative stress tolerance than untreated cells. Increased ß-1,3-glucanase, catalase, superoxide dismutase activity, and low protein carbonylation were observed in trehalose-amended S. pararoseus Y16 upon H2 O2 exposure. The RNA sequencing results indicated that trehalose significantly altered the transcriptome of S. pararoseus Y16. The GO, KEGG, and COG annotations revealed that the differentially regulated genes corresponded to the various biological process of the yeast. CONCLUSION: Our findings suggested that trehalose use could enhance the biocontrol efficiency and oxidative stress tolerance of S. pararoseus Y16. Trehalose supplementation altered the transcriptome of S. pararoseus Y16, particularly the genes that correspond to amino acid metabolism, nucleotide metabolism, and protein modification. Thereby the oxidative stress tolerance and biological control efficiency of S. pararoseus Y16 was enhanced by trehalose. © 2021 Society of Chemical Industry.

Genetic parameters for female fertility in Nordic Holstein and Red Cattle dairy breeds.

Genetic evaluation of female fertility in Danish, Finnish, and Swedish dairy cows was updated in 2015 to multiple-trait animal model evaluation, where heifer and cow fertility up to third parity are considered as separate traits. A model for conception rate was also developed, which required variance component estimation for Nordic Holstein and Nordic Red Dairy Cattle. We used a multiple-trait multiple-lactation sire model to determine variance components for interval from calving to first insemination, length of service period, and conception rate. Monte Carlo Expectation Maximization REML allowed estimation of all 11 traits simultaneously. Study data were sampled from Swedish Holstein (n = 140,040) and Red Dairy Cattle (n = 101,315) heifers and cows. Conception rate observations are binomial observations with various numbers of failures preceding an observation of success. Using a simulation study, we confirmed that including a service number effect into the conception rate model allowed us to model the change in expectation of successful AI with increasing number of services. Heifers outperformed cows in all fertility traits according to the phenotypic means in the records. Heritabilities for the traits varied from 3 to 7% for interval from calving to first insemination, from 1 to 5% for length of service period, and from 1 to 3% for conception rate. Genetic correlations within traits (i.e., between parities) were favorable, ranging from moderate to high; genetic correlations between heifer and cow traits were lower than between cow traits in different parities. Lowest genetic correlations between traits were for interval from calving to first insemination and conception rate, intermediate for interval from calving to first insemination and length of service period, and highest for length of service period and conception rate. The variance components estimated in this study have been used in Nordic fertility breeding value evaluations since 2016.

Efficient Monte Carlo algorithm for restricted maximum likelihood estimation of genetic parameters.

Monte Carlo (MC) methods have been found useful in estimation of variance parameters for large data and complex models with many variance components (VC), with respect to both computer memory and computing time. A disadvantage has been a fluctuation in round-to-round values of estimates that makes the estimation of convergence challenging. Furthermore, with Newton-type algorithms, the approximate Hessian matrix might have sufficient accuracy, but the inaccuracy in the gradient vector exaggerates the round-to-round fluctuation to intolerable. In this study, the reuse of the same random numbers within each MC sample was used to remove the MC fluctuation. Simulated data with six VC parameters were analysed by four different MC REML methods: expectation-maximization (EM), Newton-Raphson (NR), average information (AI) and Broyden's method (BM). In addition, field data with 96 VC parameters were analysed by MC EM REML. In all the analyses with reused samples, the MC fluctuations disappeared, but the final estimates by the MC REML methods differed from the analytically calculated values more than expected especially when the number of MC samples was small. The difference depended on the random numbers generated, and based on repeated MC AI REML analyses, the VC estimates were on average non-biased. The advantage of reusing MC samples is more apparent in the NR-type algorithms. Smooth convergence opens the possibility to use the fast converging Newton-type algorithms. However, a disadvantage from reusing MC samples is a possible "bias" in the estimates. To attain acceptable accuracy, sufficient number of MC samples need to be generated.

Extracellular Vesicles in the Synovial Joint: Is there a Role in the Pathophysiology of Osteoarthritis?

The role of extracellular vesicles (EV) in osteoarthritis has become the focus of much research. These vesicles were isolated from several cell types found in synovial joint including chondrocytes and synovium. As articular cartilage is an avascular tissue surrounded by synovial fluid, it is believed that EV might play a crucial role in the homeostasis of cartilage and also could hold key information in the pathogenesis of osteoarthritis. This is thought to be due to activation of pro-inflammatory factors leading to a catabolic state and degradation of cartilage. In addition, due to the nature of articular cartilage lacking neuronal innervation, knowledge of EV can contribute to identification of novel biomarkers in this debilitating condition. This can be either directly isolated from aspirate of synovial fluid or from peripheral blood. Finally, EVs are known to shuttle important signalling molecules which can be utilised as unique modality in transferring therapeutic compounds in a cell free manner.

Extracellular Vesicles in the Synovial Joint: Is there a Role in the Pathophysiology of Osteoarthritis?

@#The role of extracellular vesicles (EV) in osteoarthritis has become the focus of much research. These vesicles were isolated from several cell types found in synovial joint including chondrocytes and synovium. As articular cartilage is an avascular tissue surrounded by synovial fluid, it is believed that EV might play a crucial role in the homeostasis of cartilage and also could hold key information in the pathogenesis of osteoarthritis. This is thought to be due to activation of pro-inflammatory factors leading to a catabolic state and degradation of cartilage. In addition, due to the nature of articular cartilage lacking neuronal innervation, knowledge of EV can contribute to identification of novel biomarkers in this debilitating condition. This can be either directly isolated from aspirate of synovial fluid or from peripheral blood. Finally, EVs are known to shuttle important signalling molecules which can be utilised as unique modality in transferring therapeutic compounds in a cell free manner.

Single step genomic evaluation for female fertility in Nordic Red dairy cattle.

Joint Nordic (Denmark, Finland, Sweden) genetic evaluation of female fertility is currently based on the multiple trait multilactation animal model (BLUP). Here, single step genomic model (ssGBLUP) was applied for the Nordic Red dairy cattle fertility evaluation. The 11 traits comprised of nonreturn rate and days from first to last insemination in heifers and first three parities, and days from calving to first insemination in the first three parities. Traits had low heritabilities (0.015-0.04), but moderately high genetic correlations between the parities (0.60-0.88). Phenotypic data included 4,226,715 animals with records and pedigree 5,445,392 animals. Unknown parents were assigned into 332 phantom parent groups (PPG). In mixed model equations animals were associated with PPG effects through the pedigree or both the pedigree and genomic information. Genotype information of 46,914 SNPs was available for 33,969 animals in the pedigree. When PPG used pedigree information only, BLUP converged after 2,420 iterations whereas the ssGBLUP evaluation needed over ten thousand iterations. When the PPG effects were solved accounting both the pedigree and the genomic information, the ssGBLUP model converged after 2,406 iterations. Also, with the latter model breeding values by ssGBLUP and BLUP became more consistent and genetic trends followed each other well. Models were validated using forward prediction of the young bulls. Reliabilities and variance inflation of predicted genomic breeding values (values for parent averages in brackets) for the 11 traits ranged 0.22-0.31 (0.10-0.27) and 0.81-0.95 (0.83-1.06), respectively. The ssGBLUP model gave always higher validation reliabilities than BLUP, but largest increases were for the cow fertility traits.

Single-step SNP-BLUP with on-the-fly imputed genotypes and residual polygenic effects.

BACKGROUND: Single-step genomic best linear unbiased prediction (BLUP) evaluation combines relationship information from pedigree and genomic marker data. The inclusion of the genomic information into mixed model equations requires the inverse of the combined relationship matrix [Formula: see text], which has a dense matrix block for genotyped animals. METHODS: To avoid inversion of dense matrices, single-step genomic BLUP can be transformed to single-step single nucleotide polymorphism BLUP (SNP-BLUP) which have observed and imputed marker coefficients. Simple block LDL type decompositions of the single-step relationship matrix [Formula: see text] were derived to obtain different types of linearly equivalent single-step genomic mixed model equations with different sets of reparametrized random effects. For non-genotyped animals, the imputed marker coefficient terms in the single-step SNP-BLUP were calculated on-the-fly during the iterative solution using sparse matrix decompositions without storing the imputed genotypes. Residual polygenic effects were added to genotyped animals and transmitted to non-genotyped animals using relationship coefficients that are similar to imputed genotypes. The relationships were further orthogonalized to improve convergence of iterative methods. RESULTS: All presented single-step SNP-BLUP models can be solved efficiently using iterative methods that rely on iteration on data and sparse matrix approaches. The efficiency, accuracy and iteration convergence of the derived mixed model equations were tested with a small dataset that included 73,579 animals of which 2885 were genotyped with 37,526 SNPs. CONCLUSIONS: Inversion of the large and dense genomic relationship matrix was avoided in single-step evaluation by using fully orthogonalized single-step SNP-BLUP formulations. The number of iterations until convergence was smaller in single-step SNP-BLUP formulations than in the original single-step GBLUP when heritability was low, but increased above that of the original single-step when heritability was high.

Multi-angle fluorometer technique for the determination of absorption and scattering coefficients of subwavelength nanoparticles.

A thorough analysis of the resonance light scattering (RLS) technique for quantitative scattering measurements of subwavelength nanoparticles is reported. The systematic error associated with using a measurement at a single angle to represent all of the scattered light is investigated. In-depth analysis of the reference material was performed to identify and minimize the error associated with the reference material. Semiconductor ZnO nanobullets and spherical Au nanoparticles of various sizes were used to verify the approach. A simple and inexpensive modification to standard fluorometers is demonstrated using a glass prism allowing scattering measurements in the slightly forward and backwards directions. This allows quantification of the systematic error associated with RLS which is consistently overlooked.

Controlling Au Photodeposition on Large ZnO Nanoparticles.

This study investigated how to control the rate of photoreduction of metastable AuCl2(-) at the solid-solution interface of large ZnO nanoparticles (NPs) (50-100 nm size). Band-gap photoexcitation of electronic charge in ZnO by 370 nm UV light yielded Au NP deposition and the formation of ZnO-Au NP hybrids. Au NP growth was observed to be nonepitaxial, and the patterns of Au photodeposition onto ZnO NPs observed by high-resolution transmission electron microscopy were consistent with reduction of AuCl2(-) at ZnO facet edges and corner sites. Au NP photodeposition was effective in the presence of labile oleylamine ligands attached to the ZnO surface; however, when a strong-binding dodecanethiol ligand coated the surface, photodeposition was quenched. Rates of interfacial electron transfer at the ZnO-solution interface were adjusted by changing the solvent, and these rates were observed to strongly depend on the solvent's permittivity (ε) and viscosity. From measurements of electron transfer from ZnO to the organic dye toluidine blue at the ZnO-solution interface, it was confirmed that low ε solvent mixtures (ε ≈ 9.5) possessed markedly higher rates of photocatalytic interfacial electron transfer (∼3.2 × 10(4) electrons·particle(-1)·s(-1)) compared to solvent mixtures with high ε (ε = 29.9, ∼1.9 × 10(4) electrons·particle(-1)·s(-1)). Dissolved oxygen content in the solvent and the exposure time of ZnO to band-gap, near-UV photoexcitation were also identified as factors that strongly affected Au photodeposition behavior. Production of Au clusters was favored under conditions that caused electron accumulation in the ZnO-Au NP hybrid. Under conditions where electron discharge was rapid (such as in low ε solvents), AuCl2(-) precursor ions photoreduced at ZnO surfaces in less than 5 s, leading to deposition of several small, isolated ∼6 nm Au NP on the ZnO host instead.

Selection for population-specific adaptation shaped patterns of variation in the photoperiod pathway genes in Arabidopsis lyrata during post-glacial colonization.

Spatially varying selection can lead to population-specific adaptation, which is often recognized at the phenotypic level; however, the genetic evidence is weaker in many groups of organisms. In plants, environmental shifts that occur due to colonization of a novel environment may require adaptive changes in the timing of growth and flowering, which are often governed by location-specific environmental cues such as day length. We studied locally varying selection in 19 flowering time loci in nine populations of the perennial herb Arabidopsis lyrata, which has a wide but patchy distribution in temperate and boreal regions of the northern hemisphere. The populations differ in their recent population demographic and colonization histories and current environmental conditions, especially in the growing season length. We searched for population-specific molecular signatures of directional selection by comparing a set of candidate flowering time loci with a genomic reference set within each population using multiple approaches and contrasted the patterns of different populations. The candidate loci possessed approximately 20% of the diversity of the reference loci. On average the flowering time loci had more rare alleles (a smaller Tajima's D) and an excess of highly differentiated sites relative to the reference, suggesting positive selection. The strongest signal of selection was detected in photoperiodic pathway loci in the colonizing populations of Northwestern Europe, whereas no evidence of positive selection was detected in the Central European populations. These findings emphasized the population-specific nature of selection and suggested that photoperiodic adaptation was important during postglacial colonization of the species.

Across-country test-day model evaluations for Holstein, Nordic Red Cattle, and Jersey.

Three random regression models were developed for routine genetic evaluation of Danish, Finnish, and Swedish dairy cattle. Data included over 169 million test-day records with milk, protein, and fat yield observations from over 8.7 million dairy cows of all breeds. Variance component analyses showed significant differences in estimates between Holstein, Nordic Red Cattle, and Jersey, but only small to moderate differences within a breed across countries. The obtained variance component estimates were used to build, for each breed, their own set of covariance functions. The covariance functions describe the animal effects on milk, protein, and fat yields of the first 3 lactations as 9 different traits, assuming the same heritabilities and a genetic correlation of unity across countries. Only 15, 27, and 7 eigenfunctions with the largest eigenvalues were used to describe additive genetic animal effects and nonhereditary animal effects across lactations and within later lactations, respectively. These reduced-rank covariance functions explained 99.0 to 99.9% of the original variances but reduced the number of animal equations to be solved by 44%. Moderate rank reduction for nonhereditary animal effects and use of one-third-smaller measurement error correlations than obtained from variance component estimation made the models more robust against extreme observations. Estimation of the genetic levels of the countries' subpopulations within a breed was found sensitive to the way the breed effects were modeled, especially for the genetically heterogeneous Nordic Red Cattle. Means to ensure that only additive genetic effects entered the estimated breeding values were to describe the crossbreeding effects by fixed and random cofactors and the calving age effect by an age × breed proportion interaction, and to model phantom parent groups as random effects. To ensure that genetic variances were the same across the 3 countries in breeding value estimation, as suggested by the variance component estimates, the applied multiplicative heterogeneous variance adjustment method had to be tailored using country-specific reference measurement error variances. Results showed the feasibility of across-country genetic evaluation of cows and sires based on original test-day phenotypes. Nevertheless, applying a thorough model validation procedure is essential throughout the model building process to obtain reliable breeding values.