RESUMO
Nanomaterials must be systematically designed to be technologically viable1-5. Driven by optimizing intermolecular interactions, current designs are too rigid to plug in new chemical functionalities and cannot mitigate condition differences during integration6,7. Despite extensive optimization of building blocks and treatments, accessing nanostructures with the required feature sizes and chemistries is difficult. Programming their growth across the nano-to-macro hierarchy also remains challenging, if not impossible8-13. To address these limitations, we should shift to entropy-driven assemblies to gain design flexibility, as seen in high-entropy alloys, and program nanomaterial growth to kinetically match target feature sizes to the mobility of the system during processing14-17. Here, following a micro-then-nano growth sequence in ternary composite blends composed of block-copolymer-based supramolecules, small molecules and nanoparticles, we successfully fabricate high-performance barrier materials composed of more than 200 stacked nanosheets (125 nm sheet thickness) with a defect density less than 0.056 µm-2 and about 98% efficiency in controlling the defect type. Contrary to common perception, polymer-chain entanglements are advantageous to realize long-range order, accelerate the fabrication process (<30 min) and satisfy specific requirements to advance multilayered film technology3,4,18. This study showcases the feasibility, necessity and unlimited opportunities to transform laboratory nanoscience into nanotechnology through systems engineering of self-assembly.
RESUMO
From drug delivery to ballistic impact, the ability to control or mitigate the puncture of a fast-moving projectile through a material is critical. While puncture is a common occurrence, which can span many orders of magnitude in the size, speed, and energy of the projectile, there remains a need to connect our understanding of the perforation resistance of materials at the nano- and microscale to the actual behavior at the macroscale that is relevant for engineering applications. In this article, we address this challenge by combining a new dimensional analysis scheme with experimental data from micro- and macroscale impact tests to develop a relationship that connects the size-scale effects and materials properties during high-speed puncture events. By relating the minimum perforation velocity to fundamental material properties and geometric test conditions, we provide new insights and establish an alternative methodology for evaluating the performance of materials that is independent of the impact energy or the specific projectile puncture experiment type. Finally, we demonstrate the utility of this approach by assessing the relevance of novel materials, such as nanocomposites and graphene for real-world impact applications.
RESUMO
Cavitation is a phenomenon that occurs when the internal pressure of a material exceeds the resistance to deformation provided by the surrounding medium. Several measurements, such as the blister test, bubble inflation, and cavitation rheology, take advantage of this phenomenon to measure the local mechanical properties of soft materials at relatively low deformation rates. Here, we introduce a new measurement called laser-induced membrane expansion (LIME) that measures the shear modulus of a thin membrane at high strain rates (≈106 s-1 to 108 s-1) by using laser ablation to rapidly expand a thin (tens of microns) elastomeric membrane. To demonstrate the capabilities of this measurement, we use LIME to study the mechanical properties of poly(dimethylsiloxane) (PDMS) membranes at several thicknesses (from 10 µm to 60 µm) and crosslink densities. We find that the shear modulus of the PDMS measured by LIME was weakly dependent on the crosslink density, but was strongly strain rate dependent with values ranging from 106 Pa to 108 Pa. This measurement platform presents a new approach to studying the mechanical properties of soft but thin materials over a range of deformation rates.
RESUMO
Grape growers are often constrained by available time and labor to conduct trials that deliver informative results. Spatially distributed trial designs coupled with data collection using sensing technologies can introduce efficiencies and also account for the impact of land variability on trial results. Various spatial approaches have been proposed, yet how farmers perceive them is largely unknown. We collaborated with four wine businesses in Australia to explore how grape growers and viticultural consultants perceive a simplified spatial approach to experimentation involving one or more vineyard rows or "strips." In each case, the simplified strip approach was applied alongside growers' or consultants' own methods to compare the perceived value of different methods. The Theory of Planned Behavior was used as an analytical framework to identify factors influencing participants' intentions towards adopting the strip approach. Our findings show that growers and consultants perceived several advantages of the strip approach over their own methods. Key factors impeding uptake were resource constraints for collecting trial data and lack of skills and knowledge to use and analyze spatial data to position the trial and interpret results. These constraints highlight the need to support growers and consultants who see value in this approach by developing automated and affordable measurements for viticultural variables beyond yield, and by providing training on how to analyze and interpret spatial and response data. This study provides novel insights for private and public sectors on where to focus efforts to facilitate adoption of spatial approaches to On-Farm Experimentation by specific target audiences.
RESUMO
Modern design of common adhesives, composites and polymeric parts makes use of polymer glasses that are stiff enough to maintain their shape under a high stress while still having a ductile behavior after the yield point. Typically, material compositions are tuned with co-monomers, polymer blends, plasticizers, or other additives to arrive at a tradeoff between the elastic modulus and toughness. In contrast, strong changes to the mechanics of a glass are possible by changing only the molecular packing during vitrification or even deep in the glassy state. For example, physical aging or processing techniques such as physical vapor deposition increase the density, embrittle the material, and increase elastic modulus. Here, we use molecular simulations, validated by positron annihilation lifetime spectroscopy (PALS) and quasi-elastic neutron scattering, to understand the free volume distribution and the resulting dynamics of glassy co-polymers where the composition is systemically varied between polar 5-norbornene-2-methanol (NBOH) and non-polar ethylidene norbornene (ENB) monomers. In these polymer glasses, we analyze the structural features of the unoccupied volume using clustering analysis, where the clustering is parameterized to reproduce experimental measurements of the same features from PALS. Further, we analyze the dynamics, quantified by the Debye-Waller factor, and compare the results with softer, lower density states. Our findings indicate that faster structural relaxations and potentially improved ductility are possible through changes to the geometric structure and fraction of the free volume, and that the resulting changes to the glass dynamics are comparable to large changes in the monomer composition.
RESUMO
Blends of nanoparticles, polymers, and small molecules can self-assemble into optical, magnetic, and electronic devices with structure-dependent properties. However, the relationship between a multicomponent nanocomposite's formulation and its assembled structure is complex and cannot be predicted by theory. The blends can be strongly influenced by processing conditions, which can introduce non-equilibrium states. Currently, nanocomposite devices are designed through cycles of experimental trial and error. Machine learning (ML) methods are a compelling alternative because they can use existing datasets to map high-dimensional spaces. These methods do not rely on known relationships between parameters, so they are suited to complex systems without a solid theoretical foundation. Here, a dataset of 595 microscopy images of nanocomposite thin films is used to train a series of ML models. Correlations between the input and output parameters are examined, providing new insights into the system. Finally, the most successful ML model is used to predict the structures of new nanocomposite compositions. The results confirm that ML techniques can be used to improve the efficiency of nanocomposite device design. More broadly, the current study suggests some of the advantages and challenges associated with applying ML to complex systems.
RESUMO
Thermal percolation in polymer nanocompositesâthe rapid increase in thermal transport due to the formation of networks among fillersâis the subject of great interest in thermal management ranging from general utility in multifunctional nanocomposites to high-conductivity applications such as thermal interface materials. However, It remains a challenging subject encompassing both experimental and modeling hurdles. Successful reports of thermal percolation are exclusively found in high-aspect-ratio, conductive fillers such as graphene, albeit at filler loadings significantly higher than the electrical percolation threshold. This anomaly was attributed to the lower filler-matrix thermal conductivity contrast ratio kf/km â¼104 compared to electrical conductivity â¼1012-1016. In a randomly dispersed composite, the effect of a low contrast ratio is further accentuated by uncertainties in the morphology of the percolating network and presence of other phases such as disconnected aggregates and colloidal dispersions. Thus, the general properties of percolating networks are convoluted as they lack a defined structure. In contrast, a prototypical system with controllable nanofiller placement enables the elucidation of structure-property relations such as filler size, loading, and assembly. Using self-assembled nanocomposites with a controlled 1,2,3-dimension nanoparticle (NP) arrangement, we demonstrate that thermal percolation can be achieved in spite of using spherical, nonconductive fillers (kf/km â¼60) at a low volume fraction (9 vol %). We observe that the effects of volume fraction, interfacial thermal resistance, and filler conductivity on thermal conductivity depart from effective medium approximations. Most notably, contrast ratio plays a minor role in thermal percolation above kf/km â¼60âa common range for semiconducting nanoparticles/polymer ratios. Our findings bring new perspectives and insights to thermal percolation in nanocomposites, where the limits in contrast ratio, interfacial thermal conductance, and filler size are established.
RESUMO
Roughly 54 million Americans are 65 years of age or older. Given the number of comorbid diseases reported in older adults, healthcare tailored to the specific needs of this population is imperative. Nurse practitioners (NPs) are uniquely positioned to provide care to older adults; yet little is known about the geriatric-oriented NP workforce. In this study, four professional organizations distributed a survey link to their members who were queried on their demographic, employment, and practice characteristics; one organization's members responded to a previous survey, providing two time points for comparison. Compared with 2016 respondents, there was minimal growth in diversity, fewer who practice in suburban or rural areas, and restrictions on clinical education related to the ongoing pandemic. The findings from this study should alert policymakers of the need to address the development of an adequate workforce of clinicians who specialize in geriatrics.
Assuntos
Profissionais de Enfermagem , Idoso , Atenção à Saúde , Humanos , Profissionais de Enfermagem/educação , Inquéritos e Questionários , Recursos HumanosRESUMO
Population density can affect survival, growth, development time, and adult size and fecundity, which are collectively known as density-dependent effects. Container Aedes larvae often attain high densities in nature, and those densities may be reduced when larval control is applied. We tested the hypothesis that density-dependent effects on survival are common and strong in nature and could result in maximal adult production at intermediate densities for Aedes aegypti, Aedes albopictus, and Aedes triseriatus. We surveyed naturally occurring densities in field containers, then introduced larvae at a similar range of densities, and censused the containers for survivors. We analyzed the survival-density relationships by nonlinear regressions, which showed that survival-density relationships vary among seasons, sites, and species. For each Aedes species, some sites and times yielded predictions that larval density reduction would yield the same (compensation), or more (overcompensation), adults than no larval density reduction. Thus, larval control targeting these Aedes species cannot always be assumed to yield a reduction in the number of adult mosquitoes. We suggest that mosquito control targeting larvae may be made more effective by: Imposing maximum mortality; targeting populations when larval abundances are low; and knowing the shape of the survival-density response of the target population.
RESUMO
We report a case of a 64-year-old man with a fusiform right extracranial vertebral artery aneurysm, spanning over half the extra-cranial V2 (foraminal) segment, presenting with recurrent multi-focal posterior circulation embolic ischaemic stroke. The patient was treated with endovascular embolisation of the right vertebral artery to prevent further thrombo-embolic events. Distal and proximal occlusion of the aneurysmal vertebral artery was performed with a micro-vascular plug with partial aneurysm sack embolisation to aid thrombosis and reduce the risk of recanalisation. Two months post procedure MR angiography confirmed successful aneurysm occlusion with no post-procedural complication. The patient returned to his normal independent life. Endovascular treatment with vessel sacrifice is an effective treatment with low morbidity and we believe the MVP device to be a efficacious option in the vertebral artery.
Assuntos
Aneurisma , Isquemia Encefálica , Embolização Terapêutica , Aneurisma Intracraniano , Acidente Vascular Cerebral , Aneurisma/complicações , Isquemia Encefálica/terapia , Embolização Terapêutica/métodos , Humanos , Aneurisma Intracraniano/complicações , Aneurisma Intracraniano/diagnóstico por imagem , Aneurisma Intracraniano/terapia , Masculino , Pessoa de Meia-Idade , Acidente Vascular Cerebral/terapia , Artéria Vertebral/diagnóstico por imagem , Artéria Vertebral/cirurgiaRESUMO
Ring-shaped nanostructures can focus, filter, and manipulate electromagnetic waves, but are challenging to incorporate into devices using standard nanofabrication techniques. Directed self-assembly (DSA) of block copolymers (BCPs) on lithographically patterned templates has successfully been used to fabricate concentric rings and spirals as etching masks. However, this method is limited by BCP phase behavior and material selection. Here, a straightforward approach to generate ring-shaped nanoparticle assemblies in thin films of supramolecular nanocomposites is demonstrated. DSA is used to guide the formation of concentric rings with radii spanning 150-1150 nm and ring widths spanning 30-60 nm. When plasmonic nanoparticles are used, ring nanodevice arrays can be fabricated in one step, and the completed devices produce high-quality orbital angular momentum (OAM). Nanocomposite DSA simplifies and streamlines nanofabrication by producing metal structures without etching or deposition steps; it also introduces interparticle coupling as a new design axis. Detailed analysis of the nanoparticle ring assemblies confirms that the supramolecular system self-regulates the spatial distribution of its components, and thus exhibits a degree of flexibility absent in DSA of BCPs alone, where structures are determined by polymer-pattern incommensurability. The present studies also provide guidelines for developing self-regulating DSA as an alternative to incommensurability-driven methods.
RESUMO
BACKGROUND: Aging is associated with body composition changes that include a reduction of muscle mass or sarcopenia and an increase in visceral obesity. Thus, aging involves a muscle-fat imbalance with a shift toward more fat and less muscle. Therefore, sarcopenic obesity, defined as a combination of sarcopenia and obesity, is a global health phenomenon due to the increased aging of the population combined with the increased epidemic of obesity. Previous studies have shown inconsistent association between sarcopenic obesity and the risk of cardiovascular disease (CVD). AIMS: To systematically review the recent literature on the CVD risks associated with sarcopenic obesity and summarizes ways of diagnosis and prevention. METHODS: A systematic review of studies that reported the association between sarcopenic obesity and CVD risk in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations. RESULTS: Risk factors of sarcopenic obesity included genetic factors, aging, malnutrition, sedentary lifestyle, hormonal deficiencies and other molecular changes. The muscle-fat imbalance with increasing age results in an increase in the pro-inflammatory adipokines secreted by adipocytes and a decline in the anti-inflammatory myokines secreted by myocytes. This imbalance promotes and perpetuates a chronic low-grade inflammatory state that is characteristic of sarcopenic obesity. After application of exclusion criteria, only 12 recent studies were included in this review. The recent studies have shown a consistent association between sarcopenic obesity and cardiovascular disease risk although most of the studies are of cross-sectional design that does not confirm a causal relationship. In addition, most of the population studied were of Asian origin which may limit the generalizability of the results. Non-pharmacological interventions by exercise training and adequate nutrition appear to be useful in maintenance of muscle strength and muscle mass in combination with a reduction of adiposity to promote healthy aging. CONCLUSIONS: Sarcopenic obesity appears to increase the risk of CVD in older people; however, future prospective studies of diverse population are still required. Although non-pharmacologic interventions are useful in reducing the risk of sarcopenic obesity, novel specific pharmacologic agents are lacking.
Assuntos
Envelhecimento/fisiologia , Doenças Cardiovasculares/etiologia , Obesidade/complicações , Obesidade/diagnóstico , Medição de Risco/métodos , Sarcopenia/complicações , Sarcopenia/diagnóstico , Idoso , Idoso de 80 Anos ou mais , Estudos Transversais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Fatores de RiscoRESUMO
Exercise interventions have been shown to help physical fitness, walking, and balance after stroke, but data are lacking on whether such interventions lead to improvements in health-related quality of life (HRQoL). In this systematic review and meta-analysis, 30 randomized controlled trials (n=1836 patients) were found from PubMed, OVID MEDLINE, Web of Science, CINAHL, SCOPUS, The Cochrane Library, and TRIP databases when searched from 1966 to February 2020 that examine the effects of exercise interventions on HRQoL after stroke or transient ischemic attack. Exercise interventions resulted in small to moderate beneficial effects on HRQoL at intervention end (standardized mean difference, -0.23 [95% CI, -0.40 to -0.07]) that appeared to diminish at longer-term follow-up (standardized mean difference, -0.11 [95% CI, -0.26 to 0.04]). Exercise was associated with moderate improvements in physical health (standardized mean difference, -0.33 [95% CI, -0.61 to -0.04]) and mental health (standardized mean difference, -0.29 [95% CI, -0.49 to -0.09]) domains of HRQoL while effects on social or cognitive composites showed little difference. Interventions that were initiated within 6 months, lasted at least 12 weeks in duration, involved at least 150 minutes per week, and included resistance training appeared most effective. Exercise can lead to moderate beneficial effects on HRQoL and should be considered an integral part of stroke rehabilitation.
Assuntos
Exercício Físico/fisiologia , Ataque Isquêmico Transitório/terapia , Qualidade de Vida , Reabilitação do Acidente Vascular Cerebral/métodos , Acidente Vascular Cerebral/terapia , Exercício Físico/psicologia , Terapia por Exercício/métodos , Terapia por Exercício/psicologia , Humanos , Ataque Isquêmico Transitório/psicologia , Aptidão Física/fisiologia , Qualidade de Vida/psicologia , Ensaios Clínicos Controlados Aleatórios como Assunto/métodos , Acidente Vascular Cerebral/psicologia , Reabilitação do Acidente Vascular Cerebral/psicologia , Resultado do TratamentoRESUMO
The ethics of autonomous vehicles (AV) has received a great amount of attention in recent years, specifically in regard to their decisional policies in accident situations in which human harm is a likely consequence. Starting from the assumption that human harm is unavoidable, many authors have developed differing accounts of what morality requires in these situations. In this article, a strategy for AV decision-making is proposed, the Ethical Valence Theory, which paints AV decision-making as a type of claim mitigation: different road users hold different moral claims on the vehicle's behavior, and the vehicle must mitigate these claims as it makes decisions about its environment. Using the context of autonomous vehicles, the harm produced by an action and the uncertainties connected to it are quantified and accounted for through deliberation, resulting in an ethical implementation coherent with reality. The goal of this approach is not to define how moral theory requires vehicles to behave, but rather to provide a computational approach that is flexible enough to accommodate a number of 'moral positions' concerning what morality demands and what road users may expect, offering an evaluation tool for the social acceptability of an autonomous vehicle's ethical decision making.
Assuntos
Tomada de Decisões , Princípios Morais , Teoria Ética , Ética , Humanos , IncertezaRESUMO
The COVID-19 pandemic dramatically affected the operations of New York City hospitals during March and April of 2020. This article describes the transformation of a neurology division at a 450-bed tertiary care hospital in a multi-ethnic community in Brooklyn during this initial wave of COVID-19. In lieu of a mass redeployment of staff to internal medicine teams, we report a novel method for a neurology division to participate in a hospital's expansion of care for patients with COVID-19 while maintaining existing team structures and their inherent supervisory and interpersonal support mechanisms.
Assuntos
Infecções por Coronavirus/terapia , Departamentos Hospitalares/organização & administração , Neurologia/organização & administração , Admissão e Escalonamento de Pessoal , Pneumonia Viral/terapia , Betacoronavirus , COVID-19 , Cuidados Críticos/organização & administração , Eletroencefalografia/métodos , Hospitais Urbanos , Humanos , Internato e Residência/organização & administração , Enfermagem em Neurociência/organização & administração , Cidade de Nova Iorque , Pandemias , SARS-CoV-2 , Provedores de Redes de Segurança , Centros de Atenção TerciáriaRESUMO
The incursion of a plant pathogen into a new geographic area initiates a series of decisions about appropriate control or eradication efforts. Incomplete, erroneous, and/or selective information may be used by diverse stakeholders to support individual goals and positions on how an incursion should be managed. We discuss the complex social, political, and technical factors that shape a biosecurity response prior to reviewing information needs and common stakeholder misunderstandings. Selected examples focus on the rust fungi (order Pucciniales). We then explore how plant pathologists, as technical experts, can interact with biosecurity stakeholders to build empathy and understanding that in turn allows a shift from being a distant subject matter expert to an active participant helping to structure problems and shape knowledge flows for better outcomes.
Assuntos
Basidiomycota , Humanos , Competência ProfissionalAssuntos
Analgésicos Opioides , Clonidina , Músculos Abdominais/diagnóstico por imagem , Amidas/efeitos adversos , Analgésicos Opioides/efeitos adversos , Anestésicos Locais , Cesárea/efeitos adversos , Clonidina/efeitos adversos , Método Duplo-Cego , Feminino , Humanos , Dor Pós-Operatória/etiologia , Dor Pós-Operatória/prevenção & controle , Projetos Piloto , Gravidez , RopivacainaRESUMO
Currently available conductive inks present a challenge to achieving electrical performance without compromising mechanical properties, scalability, and processability. Here, we have developed blends of carbon black and the commercially available triblock copolymer (BCP), poly(styrene-ethylene-butylene-styrene)-g-maleic anhydride (SEBS-g-MAH) (FG1924G, Kraton), that can be readily applied as a conductive coating via a spray-coating process, for a wide range of insulating materials (fabric, wood, glass, and plastic). Simple but effective mechanical and chemical modifications of the ingredients can increase the electrical conductivity (â¼100 S/m) by an order of magnitude more than previously reported for carbon black composites; moreover, the coatings display excellent mechanical flexibility (tensile strain ε â¼ 5.00 mm/mm). To correlate electrical conductivity and nanoscale structural changes with mechanical deformation, small-angle X-ray scattering (SAXS) during in situ tensile testing was performed. We show that the nanocomposite can be produced using low-cost ingredients (â¼$ 10/kg), ensuring scalability for fabrication of large-scale devices without specialized material synthesis. Equally important, the phase behavior of block copolymers can enable recovery from physical damage via thermal annealing, which is critical for product longevity.
RESUMO
BACKGROUND: Advanced practice registered nurses (APRNs) play a pivotal role in meeting the increasing needs of elder care given the aging population. A good understanding of the characteristics of gerontological APRNs is important for future workforce planning. PURPOSE: To understand the demographic, employment, and practice characteristics of APRNs who provide elder care. METHODS: A 34-item survey was distributed to 2,500 current members of the Gerontological Advanced Practice Nurses Association. Three hundred and sixty-four members provided demographic information and employment and practice patterns. To examine the sample representativeness, the survey sample was compared with a sample drawn from the National Sample Survey of Nurse Practitioners 2012. Descriptive statistics were used for analysis. RESULTS: Most respondents were older than 55 years, held a master's degree, were certified as a Gerontology APRN, worked in a long-term/elder care setting as an APRN, earned a salary ranging from $105,001 to $125,000, and practiced in urban or suburban areas. Most respondents worked full time, provided care for people who were 55 to 75 years old, and prescribed under a collaborative agreement. IMPLICATIONS FOR PRACTICE: The study results suggested that gerontological APRNs have the experience and competence to meet the increasing needs of elder care, practice in a variety of settings, including in rural areas, and spend much time with patients. Future efforts are needed to support APRN practice, such as improving their autonomy and independence.
Assuntos
Prática Avançada de Enfermagem/classificação , Prática Avançada de Enfermagem/métodos , Geriatria/métodos , Padrões de Prática Médica/classificação , Prática Avançada de Enfermagem/tendências , Idoso , Feminino , Geriatria/classificação , Geriatria/estatística & dados numéricos , Humanos , Masculino , Pessoa de Meia-Idade , Padrões de Prática Médica/tendências , Inquéritos e Questionários , Recursos HumanosRESUMO
OBJECTIVE: While current literature has explored the transferability of laparoscopic surgical skills to robotic surgery, this study looks to investigate the transferability of surgical skills between robotic surgical simulation and simulated traditional laparoscopy. DESIGN: Participants completed a survey regarding prior surgery exposure and other confounding factors including previous video game experience and self-assessed hand-eye coordination. Following orientation to the laparoscopic simulator (LS) and robotic surgical simulator (RoSS), participants were timed performing the Balloon Grasp and Ball Drop tasks on the RoSS and the Peg Transfer and Ball Drop tasks on the LS. Participants were then randomized to either the laparoscopic or RoSS arm and timed performing the Ball Drop task 10 times and then reassessed performing the Ball Drop using the unpracticed modality. SETTING: Clinical Simulation Laboratory at the University of Vermont PARTICIPANTS: A total of 31 medical students with limited experience in laparoscopic and robotic surgery. RESULTS: There were no statistically significant differences in the demographics or prior surgical and videogame experience between the participants in the laparoscopic and robotic arms of the study (X2â¯=â¯0.72, pâ¯=â¯0.75). Timed initial assessment of the RoSS Balloon Grasp (pâ¯=â¯0.84) and Ball Drop (pâ¯=â¯0.79) tasks and the LS Peg Transfer (pâ¯=â¯0.14) and Ball Drop (pâ¯=â¯0.44) tasks were not statistically different between the 2 arms. The simulator modality which was practiced yielded the greatest improvement. The degree of improvement on the unpracticed modality was not statistically different between the groups (pâ¯=â¯0.57), and it was not significantly better than 2 rounds of sequential practice on the practiced modality (LS, pâ¯=â¯0.98 and RoSS, pâ¯=â¯0.55). CONCLUSIONS: With practice, both groups increased surgical skill on the unpracticed modality. However, this degree of improvement was equal, suggesting there is no transferability of skills between laparoscopy and robotics.