Impact of orthodontic treatment on OHRQoL of adolescents: a longitudinal study.

OBJECTIVE: The aim of this study was to evaluate the extent to which orthodontic treatment need is perceived by the patients and by the orthodontist, as well as the possible impacts on the OHRQoL (Oral Health-Related Quality of Life) over the course of conventional orthodontic treatment in adolescent patients. METHODS: The sample consisted of 55 adolescents. The perception of patients and orthodontists relative to the malocclusion was evaluated by the IOTN (Index of Orthodontic Treatment Need). The OHRQoL was evaluated by the Child-OIDP (Child-Oral Impacts on Daily Performances) questionnaire before the conventional orthodontic appliance was bonded (T0); and at the following time intervals: after one week (T1), one month (T2), three months (T3), six months (T4), and after the end of orthodontic treatment (T5). RESULTS: Adolescents who had large orthodontic treatment needs had a poor OHRQoL, according to their self-perception (p=0.003) and according to the orthodontist's perception (p<0.001), when compared with patients with small and moderate needs. There was statistically significant difference in the OHRQoL between the time intervals T0 and T1 (p=0.021), T2 and T3 (p<0.001), T3 and T4 (p=0.033), and T0 and T5 (p<0.002). At the end of treatment, all evaluated participants reported an improvement in OHRQoL. CONCLUSIONS: It was concluded that adolescents and orthodontists agreed with regard to the perception of orthodontic treatment need. In the first week and in the first month of orthodontic treatment, there was a negative impact on the OHRQoL. After three months, an improvement of OHRQoL was detected, which has progressed over time.

Effects of rapid maxillary expansion on sleep disturbance scale for children: A longitudinal CASE-series study.

OBJECTIVE: To evaluate the effects of rapid maxillary expansion (RME) on Sleep Disturbance Scale for Children (SDSC) with maxillary atresia. MATERIALS AND METHODS: The sample consisted of 27 paediatric patients evaluated through a Brazilian version of the SDSC, answered by their guardians at the following experimental time points: T0 (before installing the Hyrax expander), T1 (on the day of expander stabilization), T2 (3 months after expander stabilization), T3 (immediately after expander removal, following 6 months of retention), and T4 (3 months post-retention). Multilevel Poisson analysis adjusted for repeated measures was performed to compare outcomes across the assessment time points. RESULTS: The mean age of patients was 9.1 years (SD = 1.46). The total SDSC scores decreased and were statistically significant from T2 onwards (P < .01), with a decrease of 24% at T4 compared with T1 (IRR 0.76; 95% CI 0.69-0.84). The mean scores at T4 were already lower than the cutoff point for risk of sleep disorders. Regarding the specific domains, there was a significant reduction in sleep breathing disorders, sleep-wake transition disorders, and disorders of excessive somnolence as of T2 (P < .01), T3 (P < .05) and T4 (P < .05), respectively. CONCLUSION: RME in children with maxillary atresia had a positive effect on the reduction of total SDSC scores after 3 months of expander stabilization, sustained over 6 and 9 months and significant reduction in sleep breathing disorders domain, sleep-wake transition disorders domain, and disorders of excessive somnolence domain over time points.

Impact of orthodontic treatment on OHRQoL of adolescents: a longitudinal study

ABSTRACT Objective: The aim of this study was to evaluate the extent to which orthodontic treatment need is perceived by the patients and by the orthodontist, as well as the possible impacts on the OHRQoL (Oral Health-Related Quality of Life) over the course of conventional orthodontic treatment in adolescent patients. Methods: The sample consisted of 55 adolescents. The perception of patients and orthodontists relative to the malocclusion was evaluated by the IOTN (Index of Orthodontic Treatment Need). The OHRQoL was evaluated by the Child-OIDP (Child-Oral Impacts on Daily Performances) questionnaire before the conventional orthodontic appliance was bonded (T0); and at the following time intervals: after one week (T1), one month (T2), three months (T3), six months (T4), and after the end of orthodontic treatment (T5). Results: Adolescents who had large orthodontic treatment needs had a poor OHRQoL, according to their self-perception (p=0.003) and according to the orthodontist's perception (p<0.001), when compared with patients with small and moderate needs. There was statistically significant difference in the OHRQoL between the time intervals T0 and T1 (p=0.021), T2 and T3 (p<0.001), T3 and T4 (p=0.033), and T0 and T5 (p<0.002). At the end of treatment, all evaluated participants reported an improvement in OHRQoL. Conclusions: It was concluded that adolescents and orthodontists agreed with regard to the perception of orthodontic treatment need. In the first week and in the first month of orthodontic treatment, there was a negative impact on the OHRQoL. After three months, an improvement of OHRQoL was detected, which has progressed over time.

RESUMO Objetivo: O objetivo deste estudo foi avaliar o quanto a necessidade de tratamento ortodôntico é percebida pelos pacientes e pelo ortodontista, bem como os possíveis impactos na Qualidade de Vida Relacionada à Saúde Bucal (QVRSB) ao longo do tratamento ortodôntico convencional em pacientes adolescentes. Métodos: A amostra foi composta por 55 adolescentes. A percepção dos pacientes e ortodontistas em relação à má oclusão foi avaliada pelo Índice de Necessidade de Tratamento Ortodôntico (IOTN). A QVRSB foi avaliada pelo questionário Child-OIDP (Child-Oral Impacts on Daily Performances) antes da colagem do aparelho ortodôntico convencional (T0); e nos seguintes intervalos de tempo: após uma semana (T1), um mês (T2), três meses (T3), seis meses (T4) e após o término do tratamento ortodôntico (T5). Resultados: Adolescentes que apresentavam grandes necessidades de tratamento ortodôntico apresentaram baixa QVRSB, segundo sua autopercepção (p=0,003) e segundo a percepção do ortodontista (p<0,001), quando comparados com pacientes com necessidades pequenas e moderadas . Houve diferença estatisticamente significativa na QVRSB entre os intervalos de tempo T0 e T1 (p=0,021), T2 e T3 (p<0,001), T3 e T4 (p=0,033) e T0 e T 5 (p<0,00 2 ). Ao final do tratamento, todos os participantes avaliados relataram melhora na QVRSB. Conclusões: Concluiu-se que adolescentes e ortodontistas concordaram quanto à percepção da necessidade de tratamento ortodôntico. Na primeira semana e no primeiro mês de tratamento ortodôntico, houve impacto negativo na QVRSB. Após três meses, foi detectada uma melhora na QVRSB, que progrediu ao longo do tempo.

Effect of peracetic acid on orthodontic elastics: an in vitro experiment / Efeito do ácido peracético nos elásticos ortodônticos: um estudo in vitro

Objetivo: Este estudo teve como objetivo avaliar a elasticidade de elásticos ortodônticos após desinfecção e esterilização com ácido peracético 0,2%. Materiais e métodos: Neste estudo piloto in vitro, elásticos ortodônticos Morelli® e American Orthodontics™ nas cores cinza e cristal foram divididas em três grupos experimentais: Grupo 1, imerso em água destilada por 72 horas, Grupo 2, imerso em peracético 0,2% por 10 min (para desinfecção) e Grupo 3, imerso em ácido peracético 0,2% por 30 min (para esterilização). Após a imersão, os valores de resistência à tração dos elásticos foram analisados em uma máquina de ensaios universal (EMIC DL-1000) para avaliar a resistência, em Newtons, necessária para a ruptura dos mesmos. A normalidade dos dados foi avaliada pelo teste de Shapiro-Wilk e os dados dos diferentes grupos experimentais foram comparados pelo teste ANOVA. Resultados: Para ambas as marcas, não houve diferença estatisticamente significativa entre os grupos experimentais quanto à resistência à tração. Discussão: O estudo apresentou um método alternativo para a desinfecção e esterilização de materiais termossensíveis. Conclusão: Assim, podemos concluir que a desinfecção e esterilização dos elásticos ortodônticos com ácido peracético 0,2% não alterou seu módulo de elasticidade.

Aim: This study aimed to evaluate the elasticity of orthodontic elastics after disinfection and sterilization with 0.2% peracetic acid. Materials and methods: In this in vitro pilot study, Morelli® and American Orthodontics™ elastic bands in gray and crystal colors were divided into three experimental groups: Group 1, immersed in distilled water for 72 hours, Group 2, immersed in 0.2% peracetic acid for 10 min (for disinfection) and Group 3, immersed in 0.2% peracetic acid for 30 min (for sterilization). After immersion, the tensile strength values of the elastics were analyzed in a universal test machine (EMIC DL-1000) to evaluate the strength, in Newtons, necessary for their rupture. Normality of the data was assessed using the Shapiro-Wilk test, and data from the different experimental groups were compared using the ANOVA test. Results: For both brands, there was no statistically significant difference between the experimental groups regarding tensile strength. Discussion: This study presented an alternative method for the disinfection and sterilization of thermo-sensitive materials. Conclusion: Thus, it can be concluded that the sterilization of orthodontic elastics with 0.2% peracetic acid did not change their modulus of elasticity.

Improvement on oral health related quality of life after orthosurgical treatment: a mixed methods study.

The aim of this study was to understand the influence of orthosurgical treatment on oral health-related quality of life (OHRQoL) in patients with Class II and III skeletal malocclusion by conducting a mixed method case series study. Nineteen patients submitted to orthosurgical treatment in a private practice in Brazil were included in the sample. Data were collected retrospectively and interviews were held from March 2020 to July 2021. Patients answered to the Oral Health Impact Profile (OHIP-14) in the first part of the interview and subsequently answered the qualitative questions. The overall mean of OHIP-14 after treatment was 4.21 (SD 4.68). The qualitative data were analyzed according to thematic analysis and four themes emerged from the interviews: a) concept of quality of life, b) pre-treatment life, c) post-treatment life, and d) positive and negative aspects of treatment. Quality of Life was reported by the patients as the absence of feeling pain, having emotional and physical health, having a satisfactory esthetic appearance and self-esteem. Before treatment, most Class II patients used to complain about breathing and sleeping problems, while Class III patients complained more intensely about esthetics. Pain was a common problem reported by both Class II and Class III patients. In general, improvement was perceived in self-esteem, esthetics, function and pain. Complaints about negative aspects of the treatment were restricted to the postoperative period. The orthosurgical treatment was important for improving the OHRQoL of patients in terms of esthetic, functional and psychosocial aspects.

Pior qualidade de sono está associada à disfunção temporomandibular e hábitos parafuncionais entre estudantes e profissionais de Odontologia / La peor calidad del sueño se asocia con disfunción temporomandibular y hábitos parafuncionales en estudiantes y profesionales de Odontología / Worse sleep quality is associated with temporomandibular disorders and parafunctional habits among dental students and professionals

Este estudo teve como objetivo avaliar a associação entre a qualidade do sono e a presença de disfunção temporomandibular (DTM) e hábitos parafuncionais em estudantes e profissionais de Odontologia durante a pandemia de COVID-19. Cirurgiões-dentistas, docentes e estudantes brasileiros de graduação e pós-graduação em Odontologia responderam a um questionário virtual composto pelos seguintes instrumentos: Índice de Qualidade do Sono de Pittsburgh, Lista de Verificação de Comportamentos Orais, Índice Anamnésico de Fonseca e questões socioeconômicas e demográficas. Os questionários foram disponibilizados online de agosto a novembro de 2020. A associação entre as variáveis preditoras e cada desfecho foi avaliada por meio da regressão de Poisson. A amostra foi composta por 449 participantes, sendo que 259 (59,5%) relataramdistúrbios do sono, 352 (78,4%) apresentavam DTM e 311 (69,3%) realizavam hábitos orais parafuncionais. Os distúrbios do sono foram associados à maior prevalência de hábitos orais parafuncionais (RP 1,61; IC 95% 1,36-1,91) e DTM (RP 1,16; IC 95% 1,04-1,29). Além disso, as mulheres apresentaram maior prevalência de DTM em relação aos homens, assim como indivíduos cuja renda era menor. Desta forma, os distúrbios do sono foram associados a hábitos orais parafuncionais e DTM em estudantes e profissionais de Odontologia durante a quarentena da COVID-19 (AU).

Este estudio tuvo como objetivo evaluar la asociación entre la calidad del sueño y la presencia de disfunción temporomandibular (DTM) y hábitos parafuncionales en estudiantes y profesionales de Odontología durante la pandemia de COVID-19. Odontólogos, profesores y estudiantes brasileños de pregrado y posgrado en Odontología respondieron un cuestionario virtual compuesto por los siguientes instrumentos: Índice de Calidad de Sueño de Pittsburgh, Lista de Verificación de Comportamiento Oral, Índice Anamnésico de Fonseca y preguntas socioeconómicas y demográficas. Los cuestionarios estuvieron disponibles virtualmente de agosto a noviembre de 2020. La asociación entre las variables predictoras y cada resultado se evaluó mediante regresión de Poisson. La muestra estuvo compuesta por 449 participantes, de los cuales 259 (59,5%) refirieron trastornos del sueño, 352 (78,4%) DTM y 311 (69,3%) hábitos orales parafuncionales. Los trastornos del sueño se asociaron con una mayor prevalencia de hábitos bucales parafuncionales (RP 1,61; IC 95% 1,36-1,91) y DTM (RP 1,16; IC 95% 1,04-1,29). Además, las mujeres tenían una mayor prevalencia de DTM que los hombres, así como las personas con ingresos más bajos. Así, los trastornos del sueño se asociaron con hábitos orales parafuncionales y DTM en estudiantes y profesionales de odontología durante la cuarentena por COVID-19 (AU).

This study aimed to assess the association between sleep quality and the presence of temporomandibular disorders (TMD) and parafunctional habits in dental students and professionals during the COVID-19 quarantine. Brazilian dentists, professors, and dental undergraduate and graduate students answered a virtual questionnaire composed of the following instruments: Pittsburgh Sleep Quality Index. Oral Behaviors Checklist, Fonseca Anamnestic Index, and socioeconomic and demographic questions. Questionnaires were available on-line from August to November 2020. The association between the predictor variables and each outcome were assessed using Poisson regression. The sample consisted of 449 participants, 259 (59.5%) of whom had sleep disorders, 352 (78.4%) had TMD, and 311 (69.3%) had parafunctional oral habits. Sleep disorders were associated with higher prevalence of parafunctional oral habits (PR 1.61; 95%CI 1.36-1.91) and TMD (PR 1.16; 95%CI 1.04-1.29). Furthermore, women showed a higher prevalence of TMD in comparison to men, as well as individuals with lower income. Sleep disorders were associated with parafunctional oral habits and TMD in dental students and professionals during COVID-19 quarantine (AU).

Diagnosis of juvenile idiopathic arthritis with asymptomatic involvement of the temporomandibular joint: A case report.

Juvenile idiopathic arthritis (JIA) is a broad term that describes a group of heterogeneous rheumatologic diseases, mainly characterized by inflammation in the joints of children and young people up to 16 years of age. Its etiology is still not well understood and the diagnosis, essentially clinical, begins with the exclusion of other joint diseases. When the disease affects the temporomandibular joint, diagnosis is a challenge, as many patients are asymptomatic. The objective of this paper is to present a case of JIA with severe involvement of the temporomandibular joint and to discuss the clinical, radiographic, laboratory findings and the importance of early diagnosis. The lack of diagnosis of active arthritis in the temporomandibular joint in patients with JIA can cause irreversible effects such as micrognathia, malocclusion and reduced maximum mouth opening. Early diagnosis of temporomandibular joint involvement in JIA is important and needs to be investigated early in the clinical manifestation of systemic disease. Laboratory tests and clinical history are important to define treatment and prognosis, but not to predict temporomandibular joint arthritis. Imaging exams are important diagnostic tools to identify morphological changes in soft and hard tissues of the temporomandibular joint.

Improvement on oral health related quality of life after orthosurgical treatment: a mixed methods study

Abstract The aim of this study was to understand the influence of orthosurgical treatment on oral health-related quality of life (OHRQoL) in patients with Class II and III skeletal malocclusion by conducting a mixed method case series study. Nineteen patients submitted to orthosurgical treatment in a private practice in Brazil were included in the sample. Data were collected retrospectively and interviews were held from March 2020 to July 2021. Patients answered to the Oral Health Impact Profile (OHIP-14) in the first part of the interview and subsequently answered the qualitative questions. The overall mean of OHIP-14 after treatment was 4.21 (SD 4.68). The qualitative data were analyzed according to thematic analysis and four themes emerged from the interviews: a) concept of quality of life, b) pre-treatment life, c) post-treatment life, and d) positive and negative aspects of treatment. Quality of Life was reported by the patients as the absence of feeling pain, having emotional and physical health, having a satisfactory esthetic appearance and self-esteem. Before treatment, most Class II patients used to complain about breathing and sleeping problems, while Class III patients complained more intensely about esthetics. Pain was a common problem reported by both Class II and Class III patients. In general, improvement was perceived in self-esteem, esthetics, function and pain. Complaints about negative aspects of the treatment were restricted to the postoperative period. The orthosurgical treatment was important for improving the OHRQoL of patients in terms of esthetic, functional and psychosocial aspects.

Temporomandibular disorders and associated comorbidities among brazilian dental students during COVID-19

Aim: This study aimed to assess the prevalence of temporomandibular disorders (TMD) and psychosocial comorbidities in undergraduate dental students in a southern Brazilian university, during the COVID-19 pandemic. Also, it aimed to verify the association between psychosocial factors and TMD. Methods: Fonseca Anamnestic Index, Depression Anxiety Stress Scale (DASS-21), a socioeconomic questionnaire, and questions about academic performance and social distancing were applied. Poisson regression analysis was used to assess the association of predictive variables with TMD. Results: The prevalence of TMD was found to be 82.4%, and more than half of the students had some degree of stress, anxiety, and depression. Students who had symptoms of stress (RR 1.11; 95% CI 1.04-1.19), anxiety (RR 1.19; 95% CI 1.12-1.27) and reported academic performance worsening (RR 1.12; 95% CI 1.07-1.19) had higher TMD scores. Conclusion: The findings suggest that TMD was highly prevalent among dental students at a federal university in southern Brazil during the pandemic, being associated with high levels of stress, anxiety, poor academic performance, and greater social distancing

Color stability of resin composites for orthodontic attachments: an in vitro study.

OBJECTIVE: The aim of the present study was to evaluate the color stability of Filtek Z350 XT, Filtek Z250 XT, Z100 resin composites and Transbond XT orthodontic resin, all used in orthodontic attachments, when immersed in popular beverages. METHODS: Thirty disk-shaped specimens of each resin composite (2 x 5mm) were manufactured and randomly divided into six groups according to immersion solutions: coffee, red wine, white wine, regular beer, dark beer and deionized water (control). The specimens were fully immersed in each of the solutions for six days at 37°C, representing approximately six months of consumption. The color measurements were evaluated by a reflection spectrophotometer, at baseline (before immersion) and after staining. L*a*b* coordinates were measured and the color change (ΔE00) was calculated using the CIEDE2000 formula. The data were analyzed by ANOVA/Tukey tests at a significance level of 0.05. RESULTS: The resin composites immersed in white wine and regular beer showed either imperceptible or clinically acceptable ΔE00, and no difference from the control group (p= 0.4449 and p= 0.467 respectively). Immersion in coffee and red wine were considered clinically unacceptable and were significantly different from the control group (p= 0.0028 and p= 0.0475 respectively). CONCLUSION: Based on the results of the present study, the consumption of coffee and red wine may cause color change of the resin composite attachments above the visual acceptability threshold, and impair aesthetics during treatment.

Correlation between cortical bone thickness at mini-implant insertion sites and age of patient.

INTRODUCTION: Orthodontic mini-implants (MI) are a reliable alternative to provide temporary orthodontic anchorage. Prior to miniscrew insertion, the best approach would be to evaluate each possible insertion site and measure the cortical bone thickness, and verify whether it would provide adequate primary stability. OBJECTIVE: This study aimed to evaluate the difference in cortical bone thickness in areas of mini-implants insertion in patients of different ages, by means of cone beam computed tomography (CBCT). METHODS: The sample of this retrospective study was composed of 123 CBCT scans, which were used to measure cortical bone thickness in the buccal and palatal inter-radicular space in the mesial region of the first permanent molars. These measures were compared by using the Student's t-test, ANOVA/Tukey tests, and Linear regression between male and female subjects, from 12 to 30 years old. RESULTS: No significant difference was found in cortical bone thickness between sex, race and sagittal facial patterns. Significantly higher measurement values were observed in patients older than 12 years of age at all sites evaluated. The coefficient ß at the adjusted linear regression analysis showed that at each increment in age, mean cortical thickness values increased by 0.06mm in the mandible, 0.03mm in the buccal region and 0.02mm in the palatal region of the maxilla. CONCLUSIONS: The increase in cortical bone thickness was positively associated with age; that is, the more advanced the patient's age was, the less chance there was of failure due to primary stability.

Rapid LLLT protocol for myofascial pain and mouth opening limitation treatment in the clinical practice: An RCT.

OBJECTIVE: To evaluate the effect of a rapid treatment protocol of low-level laser therapy (LLLT) in patients with myofascial pain and mouth opening limitation. METHODS: Twenty patients were randomly allocated into the laser group (LG) (n = 10) and the placebo group (PG) (n = 10). Two LLLT sessions or placebo were performed. They were applied to the pain points upon palpation, with a 48-hr interval. Patients were evaluated for spontaneous pain sensitivity during mandibular movements and for oral health-related quality of life, which was assessed using the Oral Health Impact Profile for Temporomandibular Disorders (OHIP/TMD) questionnaire. RESULTS: Two patients from the placebo group were lost during the study. A significant increase in the maximum mouth opening (p = 0.04) and improvement in OHIP/TMD scores (p = 0.003) were observed in the LG after 30 days. CONCLUSION: Spontaneous pain was reduced in both groups with low-level laser therapy.

Avaliação da acurácia de medidas lineares de modelos ortodônticos digitalizados / Assessment of the accuracy of linear measurements of digitalized orthodontic models

Resumo Objetivo: Esse estudo teve como objetivo comparar a acurácia de mensurações lineares realizadas, de acordo com o método de Moyers, em modelos de gesso pelo método manual com paquímetro em modelos digitais 3D digitalizados por scanner de mesa e em modelos digitais 3D obtidos por Tomografia Computadorizada Multislice com protocolo CTdBem. Método: Um único operador selecionou 90 modelos de gesso da arcada inferior para análise de dentição mista. Os métodos testados e o método manual foram comparados usando o teste-t pareado. Para avaliar o acordo entre os métodos, a correlação de Pearson foi utilizada. O gráfico de Bland-Altman foi construído para avaliar a diferença entre as medidas de cada amostra. Resultados: Não houve diferenças significativas entre as medidas do scanner e da Tomografia Computadorizada Multislice, quando comparadas com as medidas do método manual (p>0.05). Ambos os métodos digitais apresentaram correlação alta e significativa com o método manual com coeficientes de 0,98 e 0,97 para o scanner e a Tomografia Computadorizada Multislice, respectivamente (p<0.01). Conclusão: Os modelos digitais obtidos por scanner de mesa e por Tomografia Computadorizada Multislice com protocolo CTdBem produziram medidas lineares e com boa acurácia, compatíveis com as medidas manuais realizadas em modelo de gesso. (AU)

Abstract Aim: This study has aimed to compare the accuracy of linear measurements made, according to the Moyers method, on plaster casts by the manual method using a pachymeter in digital 3D models digitalized by a desktop scanner and in 3D digital models scanned by Multislice Computed Tomography using the CTdBem protocol. Method: A single operator has selected 90 plaster casts of the mandibular arch for analysis of mixed dentition. The methods tested and manual method were compared by using the paired t-test. To assess the agreement between the methods, Pearson's correlation was performed. The Bland-Altman plot was built to evaluate the difference among the measurements for each sample. Results: There were no significant differences between scanner and Multislice CT measurements when compared to the manual method measurements (p> 0.05). Both digital methods have had a high and significant correlation with the manual method with coefficients of 0.98 and 0.97 for the scanner and Multislice CT method, respectively (p<0.01). Conclusions: The digital models obtained by means of the desktop scanner and Multislice Computed Tomography by means of CTdBem protocol produced linear measurement and with good accuracy, compatible with the manual measurements made on plaster casts (AU)

Correlation between cortical bone thickness at mini-implant insertion sites and age of patient

ABSTRACT Introduction: Orthodontic mini-implants (MI) are a reliable alternative to provide temporary orthodontic anchorage. Prior to miniscrew insertion, the best approach would be to evaluate each possible insertion site and measure the cortical bone thickness, and verify whether it would provide adequate primary stability. Objective: This study aimed to evaluate the difference in cortical bone thickness in areas of mini-implants insertion in patients of different ages, by means of cone beam computed tomography (CBCT). Methods: The sample of this retrospective study was composed of 123 CBCT scans, which were used to measure cortical bone thickness in the buccal and palatal inter-radicular space in the mesial region of the first permanent molars. These measures were compared by using the Student's t-test, ANOVA/Tukey tests, and Linear regression between male and female subjects, from 12 to 30 years old. Results: No significant difference was found in cortical bone thickness between sex, race and sagittal facial patterns. Significantly higher measurement values were observed in patients older than 12 years of age at all sites evaluated. The coefficient β at the adjusted linear regression analysis showed that at each increment in age, mean cortical thickness values increased by 0.06mm in the mandible, 0.03mm in the buccal region and 0.02mm in the palatal region of the maxilla. Conclusions: The increase in cortical bone thickness was positively associated with age; that is, the more advanced the patient's age was, the less chance there was of failure due to primary stability.

RESUMO Introdução: Os mini-implantes ortodônticos (MI) são uma alternativa confiável para fornecer ancoragem esquelética temporária. Antes da inserção do mini-implante, a melhor abordagem seria avaliar cada local de inserção possível, medir a espessura do osso cortical e verificar se proporcionaria uma adequada estabilidade primária. Objetivo: O presente estudo teve como objetivo avaliar a diferença na espessura do osso cortical em áreas de inserção dos mini-implantes em pacientes de diferentes idades, por meio da tomografia computadorizada de feixe cônico. Métodos: A amostra desse estudo retrospectivo foi composta por 123 tomografias computadorizadas de feixe cônico, que foram utilizadas para medir a espessura do osso cortical nos espaços inter-radiculares vestibular e palatino na região mesial dos primeiros molares permanentes. Essas medidas foram comparadas por meio dos testes t de Student, ANOVA/Tukey e regressão linear entre os sexos masculino e feminino, de 12 a 30 anos. Resultados: Não houve diferença estatisticamente significativa na espessura cortical, quando comparados sexo, cor da pele e padrão facial sagital. Foram verificadas medidas significativamente maiores em pacientes com idade superior a 12 anos em todos os sítios avaliados. O coeficiente β da análise de regressão linear ajustada mostrou que, a cada incremento da idade, os valores médios da espessura cortical aumentaram 0,06 mm na mandíbula, 0,03 mm na região vestibular e 0,02 mm na região palatina da maxila. Conclusão: O aumento da espessura do osso cortical teve associação positiva com a idade, ou seja, quanto mais avançada a idade do paciente, menor a chance de falha, devido à estabilidade primária.

Association between malocclusion, tongue position and speech distortion in mixed-dentition schoolchildren: an epidemiological study.

BACKGROUND: Malocclusions are highly prevalent in childhood and adolescence, being considered a public health problem worldwide, in addition to be considered an important predictor in the tongue position and speech disorders. OBJECTIVE: Evaluate the association of malocclusions with tongue position and speech distortion in mixed-dentition schoolchildren from the south of Brazil. METHODOLOGY: This cross-sectional study was performed using a database of an epidemiological survey realized in the southern of Brazil, in 2015, for evaluating the dental and myofunctional condition of the mixed-dentition from 7-13 years' schoolchildren. The outcome variables were tongue position and speech distortion, evaluated by a trained and calibrated examiner. Characteristics regarding sociodemographic and oral health measures (Angle's classification of the malocclusion, overjet, overbite, posterior crossbite and respiratory mode) were also assessed. Poisson regression models with adjusted robust variance were used to evaluate the association among predictors variables in the outcomes. Results are presented as prevalence ratio (PR) and 95% confidence interval (95% CI). RESULTS: A total of 547 children were evaluated. Schoolchildren who presented anterior open bite (PR 2.36 95%CI 1.59-3.49) and having oral/oral-nasal breathing (RP 2.51 95%CI 1.70-3.71) are more likely to have altered position of the tongue. Both deep bite and being male represent protection factors for the abnormal tongue position. Regarding speech distortion, deep overbite presents a protective relationship to speech distortion (PR 0.41; 95%CI 0.24-0.71), whereas schoolchildren with posterior crossbite were more likely to present this problem (PR 1.77; 95%CI 1.09-2.88). CONCLUSION: Anterior open bite and posterior crossbite were the malocclusions related to speech distortion and/or altered tongue position. Oral/oral-nasal breathing was also related to myofunctional changes. Deep bite malocclusion was a protective factor for both speech problems and altered tongue position when compared to a normal overbite.

Association between malocclusion, tongue position and speech distortion in mixed-dentition schoolchildren: an epidemiological study

Abstract Background Malocclusions are highly prevalent in childhood and adolescence, being considered a public health problem worldwide, in addition to be considered an important predictor in the tongue position and speech disorders. Objective Evaluate the association of malocclusions with tongue position and speech distortion in mixed-dentition schoolchildren from the south of Brazil. Methodology This cross-sectional study was performed using a database of an epidemiological survey realized in the southern of Brazil, in 2015, for evaluating the dental and myofunctional condition of the mixed-dentition from 7-13 years' schoolchildren. The outcome variables were tongue position and speech distortion, evaluated by a trained and calibrated examiner. Characteristics regarding sociodemographic and oral health measures (Angle's classification of the malocclusion, overjet, overbite, posterior crossbite and respiratory mode) were also assessed. Poisson regression models with adjusted robust variance were used to evaluate the association among predictors variables in the outcomes. Results are presented as prevalence ratio (PR) and 95% confidence interval (95% CI). Results A total of 547 children were evaluated. Schoolchildren who presented anterior open bite (PR 2.36 95%CI 1.59-3.49) and having oral/oral-nasal breathing (RP 2.51 95%CI 1.70-3.71) are more likely to have altered position of the tongue. Both deep bite and being male represent protection factors for the abnormal tongue position. Regarding speech distortion, deep overbite presents a protective relationship to speech distortion (PR 0.41; 95%CI 0.24-0.71), whereas schoolchildren with posterior crossbite were more likely to present this problem (PR 1.77; 95%CI 1.09-2.88). Conclusion Anterior open bite and posterior crossbite were the malocclusions related to speech distortion and/or altered tongue position. Oral/oral-nasal breathing was also related to myofunctional changes. Deep bite malocclusion was a protective factor for both speech problems and altered tongue position when compared to a normal overbite.

Enamel Roughness Changes after Removal of Orthodontic Adhesive.

The aim of this study was to evaluate enamel roughness, quality of the enamel surfaces and time duration comparing different orthodontic adhesive removal protocols. Premolars were used to test three adhesive removal methods (n = 20): five-blade carbide bur, 30-blade carbide bur, and ultrasonic diamond bur. Bracket was bonded using TransbondTM XT adhesive. Roughness with different parameters was measured before bracket bonding and after adhesive remnants removal. Micromorphological analysis of enamel surface (n = 5) was performed by SEM images and categorized in enamel damage index-"perfect"; "satisfying"; "imperfect"; and "unacceptable". Time was measured in seconds. All removal methods caused increased roughness in relation to Ra, Rq, and Rz parameters (X axis) comparing to healthy enamel surface. Enamel surface resulted from removal using five-blade burs was scored as satisfactory. Carbide bur groups decreased the roughness values of Ra, Rq, and Rz parameters on the Y axis and enamel surface was considered unacceptable. The 30-blade group increased symmetry (Rsk) and flattening (Rku) parameters of roughness and surface was scored as unsatisfactory. Diamond bur removed adhesive in 54.8 s, faster than five-blade carbide bur. The five-blade bur group resulted in less enamel roughness than the 30-blade and diamond groups.

Tomographic Evaluation of the Lower Incisor's Bone Limits in Mandibular Symphysis of Orthodontically Untreated Adults.

The amount of available bone in the lower incisor region is critical for periodontal preservation when planning large anteroposterior dental movements. The aims of this study were to evaluate bone limits of the lower incisors in the mandibular symphysis and to verify whether they are influenced by facial growth patterns, lower incisor inclinations, skeletal anteroposterior relationships, or patient age. Tomographic images of 40 orthodontically untreated patients were evaluated and measurements of width and height of the mandibular symphysis, thickness on the lingual and labial sides of the alveolar bone, and thickness of the entire alveolar bone were performed in sagittal view. The following cephalometric measurements were also evaluated: growth pattern (FHI), lower incisor inclination (IMPA), and skeletal anteroposterior relationships (AO-BO). Pearson's correlation test was used to assess associations among bone measurements, cephalometric measurements, and patients' ages. Weak to moderate positive correlations between FHI and bone measurements on the labial side of the incisors and total alveolar width were found. The height of the symphysis had a moderate negative correlation with FHI. It was concluded that patient age, FHI, and IMPA influenced bone limits of the lower incisors in the mandibular symphysis, while AO-BO had no influence.

Effect of etching with different hydrofluoric acid concentrations on bond strength between glazed feldspathic ceramic and metal brackets / Efeito de diferentes concentrações de ácido fluorídrico na resistência adesiva entre uma cerâmica feldspatica glazeada e bráquetes metálicos

Objetivo: O objetivo deste estudo foi avaliar o efeito do condicionamento com diferentes concentrações de ácido fluorídrico (AF) na resistência de união ao cisalhamento entre cerâmica feldspática glazeada e bráquetes metálicos. Material e Métodos: Setenta e cinco blocos de cerâmica feldspática glazeada foram produzidos e distribuídos aleatoriamente em 5 grupos: Ctrl- silano; HF1- AF 1% + silano; HF3- AF 3% + silano; HF5- AF 5% + silano; HF10- AF 10% + silano (procedimento padrão: condicionamento por 1 min + lavagem + secagem + silanização). Bráquetes metálicos de incisivo central superior (Edgewise Standard) foram colados sobre a superfície da cerâmica com o uso de um sistema adesivo e resina composta fotopolimerizável (Transbond TM XT, 3M). Os espécimes foram envelhecidos por 60 dias (termociclagem: 10000x a 5-55°C; estocados em água destilada a 37°C). O teste de cisalhamento foi realizado e espécimes foram classificados quanto ao seu Índice de Remanescente Adesivo (IRA). Inspeção topográfica e análise do ângulo de contato da superfície da cerâmica condicionada foram realizados. Dados de resistência adesiva foram analisados estatisticamente usando o teste de Kruskal-Wallis, enquanto os dados de ângulo de contato foram analisados com ANOVA 1-fator e teste de Tukey (p<0.05). Resultados: Nenhuma diferença significativa foi detectada para a resistência de união entre os grupos; mas o condicionamento da superfície teve uma influência significativa sobre os resultados de ângulo de contato (p<0.00001). O grupo controle apresentou a mais alta média de ângulo de contato (61,8± 17,2°). Todos os espécimes apresentaram falhas adesivas na interface cerâmica-resina. Conclusão: As concentrações de AF testadas não influenciaram significativamente a resistência de união de bráquetes metálicos aderidos na superfície de cerâmica feldspática glazeada

Objective: The aim of this study was evaluate the effect of etching with different hydrofluoric acid (HF) concentrations on the shear bond strength between glazed feldspathic ceramic and metal brackets. Material and Methods: –Seventyfive blocks of glazed feldspathic ceramic were produced and randomly allocated to 5 groups: Ctrl- silane application only; HF1- HF1%+silane; HF3- HF3%+silane; HF5- HF5%+silane; HF10 HF10%+silane (standard procedures: etching for 1 min + washing + drying + silanization). Metal brackets for upper central incisors (Edgewise Standard) were bonded on the ceramic surface with the use of an adhesive system and light-cured composite resin (TransbondTM XT, 3M). The specimens were aged for 60 days (thermocycling: 10000x at 5-55 °C; stored in distilled water at 37°C). Shear testing was performed, and specimens were classified for their AdhesiveRemnant-Index (ARI). Topographical inspectionand contact angle analysis of the etched ceramic surfaces were performed. Data were statistically analyzed using the non-parametric Kruskal-Wallis test. One-way ANOVA and post-hoc Tukey’s tests were applied to the contact angle data (p<0.05). Results: No significant difference was detected between the shear bond strength of the groups; but surface etching had a significant influence on the contact angle results (p<0.00001). The control group presented the highest mean contact angle (61.8±17.2°). All specimens showed adhesive failure at the resin ceramic interface. Conclusion The tested HF concentrations did not significantly influence the obtained shear bond strength of metal brackets adhered to glazed feldspathic ceramic surfaces.

Effect of surface treatment of brackets and mechanical cycling on adhesion to enamel.

This in vitro study sought to evaluate how surface conditioning from bracket and mechanical cycling aging affected the bond strength between metallic brackets and bovine enamel, and to determine the adhesive remnant index. Eighty bovine incisors were embedded in acrylic resin using polyvinyl chloride rings and divided into 4 groups based on surface treatment (n = 20). Group 1 (control) received no surface treatment, Group 2 specimens were sandblasted with aluminum oxide particles, Group 3 specimens were sandblasted with silicon oxide and treated with a tribochemichemical silica coupling agent, and Group 4 specimens were primed with a multidomain protein-based agent. Half of the specimens were submitted to shear bond testing, while the others were subjected to mechanical cycling. ANOVA showed that mechanical cycling did not have a significant influence on bond strength (P = 0.9244), while surface conditioning of the brackets did (P = 0.0001). Tukey's test results were similar for mechanical cycling, and indicated that only Group 3 significantly improved the resin bond to the brackets; however, this group also demonstrated the highest percentage of enamel failure.