Characterization of Different Sources of Human MSCs Expanded in Serum-Free Conditions with Quantification of Chondrogenic Induction in 3D.

Mesenchymal stem cells (MSCs) represent alternative candidates to chondrocytes for cartilage engineering. However, it remains difficult to identify the ideal source of MSCs for cartilage repair since conditions supporting chondrogenic induction are diverse among published works. In this study, we characterized and evaluated the chondrogenic potential of MSCs from bone marrow (BM), Wharton's jelly (WJ), dental pulp (DP), and adipose tissue (AT) isolated and cultivated under serum-free conditions. BM-, WJ-, DP-, and AT-MSCs did not differ in terms of viability, clonogenicity, and proliferation. By an extensive polychromatic flow cytometry analysis, we found notable differences in markers of the osteochondrogenic lineage between the 4 MSC sources. We then evaluated their chondrogenic potential in a micromass culture model, and only BM-MSCs showed chondrogenic conversion. This chondrogenic differentiation was specifically ascertained by the production of procollagen IIB, the only type II collagen isoform synthesized by well-differentiated chondrocytes. As a pilot study toward cartilage engineering, we encapsulated BM-MSCs in hydrogel and developed an original method to evaluate their chondrogenic conversion by flow cytometry analysis, after release of the cells from the hydrogel. This allowed the simultaneous quantification of procollagen IIB and α10, a subunit of a type II collagen receptor crucial for proper cartilage development. This work represents the first comparison of detailed immunophenotypic analysis and chondrogenic differentiation potential of human BM-, WJ-, DP-, and AT-MSCs performed under the same serum-free conditions, from their isolation to their induction. Our study, achieved in conditions compliant with clinical applications, highlights that BM-MSCs are good candidates for cartilage engineering.

Phenotypic Identification of Dental Pulp Mesenchymal Stem/Stromal Cells Subpopulations with Multiparametric Flow Cytometry.

Dental pulp (DP) is a specialized, highly vascularized, and innervated connective tissue mainly composed of undifferentiated mesenchymal cells, fibroblasts, and highly differentiated dentin-forming odontoblasts. Undifferentiated mesenchymal cells include stem/stromal cell populations usually called dental pulp mesenchymal stem cells (DP-MSCs) which differ in their self-renewal properties, lineage commitment, and differentiation capabilities. Analysis of surface antigens has been largely used to precisely identify these DP-MSC populations. However, a major difficulty is that these antigens are actually not specific for MSCs. Most of the markers used are indeed shared by other cell populations such as progenitor cells, mature fibroblasts, and/or perivascular cells. Accordingly, the detection of only one of these markers in a cell population is clearly insufficient to determine its stemness. Recent data reported that multiparametric flow cytometry, by allowing for the detection of several molecules on the surface of one single cell, is a powerful tool to elucidate the phenotype of a cell population both in vivo and in vitro. So far, DP-MSC populations have been characterized mainly based on the isolated expression of molecules known to be expressed by stem cells, such as Stro-1 antigen, melanoma cell adhesion molecule MCAM/CD146, low-affinity nerve growth factor receptor p75NTR/CD271, and the mesenchymal stem cell antigen MSCA-1. Using multiparametric flow cytometry, we recently showed that human DP-MSCs are indeed phenotypically heterogeneous and form several populations.The present paper describes the multiparametric flow cytometry protocol we routinely use for characterizing DP-MSCs. The description includes the design of the antibody panel and explains the selection of the different parameters related to the data quality control.

Current challenges in human tooth revitalization.

Tooth vitality and health are related to the presence of a living connective tissue, the dental pulp (DP), in the center of the dental organ. The DP contains the tooth immune defence system that is activated against invading oral cariogenic bacteria during the caries process and the tissue repair/regeneration machinery involved following microorganisms' eradication. However, penetration of oral bacteria into the DP often leads to complete tissue destruction and colonization of the endodontic space by microorganisms. Classical endodontic therapies consist of disinfecting then sealing the endodontic space with a gutta percha-based material. However, re-infections of the endodontic space by oral bacteria can occur, owing to the lack of tightness of the material. Recent findings suggest that regenerating a fully functional pulp tissue may be an ideal therapeutic solution to maintain a tooth defence system that will detect and help manage future injuries. The objective of this paper was to explain the different revascularization and regeneration strategies that have been proposed to reconstitute a living DP tissue and to discuss the main challenges that have to be resolved to improve these therapeutic strategies.

Evaluation of Three Devices for the Isolation of the Stromal Vascular Fraction from Adipose Tissue and for ASC Culture: A Comparative Study.

Adipose-derived stem/stromal cells (ASCs) reside in the stromal vascular fraction (SVF) of adipose tissue (AT) and can be easily isolated. However, extraction of the SVF from lipoaspirate is a critical step in generating ASC, and semiautomated devices have been developed to enhance the efficacy and reproducibility of the outcomes and to decrease manipulation and contamination. In this study, we compared the reference method used in our lab for SVF isolation from lipoaspirate, with three medical devices: GID SVF-1™, Puregraft™, and Stem.pras®. Cell yield and their viability were evaluated as well as their phenotype with flow cytometry. Further on, we determined their proliferative potential using population doublings (PD), PD time (PDT), and clonogenicity assay (CFU-F). Finally, we checked their genetic stability using RT-qPCR for TERT mRNA assay and karyotyping as well as their multilineage potential including adipogenic, chondrogenic, and osteogenic differentiation. Our results demonstrate that all the devices allow the production of SVF cells with consistent yield and viability, in less time than the reference method. Expanded cells from the four methods showed no significant differences in terms of phenotype, proliferation capabilities, differentiation abilities, and genetic stability.

Immunophenotyping Reveals the Diversity of Human Dental Pulp Mesenchymal Stromal Cells In vivo and Their Evolution upon In vitro Amplification.

Mesenchymal stromal/stem cells (MSCs) from human dental pulp (DP) can be expanded in vitro for cell-based and regenerative dentistry therapeutic purposes. However, their heterogeneity may be a hurdle to the achievement of reproducible and predictable therapeutic outcomes. To get a better knowledge about this heterogeneity, we designed a flow cytometric strategy to analyze the phenotype of DP cells in vivo and upon in vitro expansion with stem cell markers. We focused on the CD31- cell population to exclude endothelial and leukocytic cells. Results showed that the in vivo CD31- DP cell population contained 1.4% of CD56+, 1.5% of CD146+, 2.4% of CD271+ and 6.3% of MSCA-1+ cells but very few Stro-1+ cells (≤ 1%). CD56+, CD146+, CD271+, and MSCA-1+ cell subpopulations expressed various levels of these markers. CD146+MSCA-1+, CD271+MSCA-1+, and CD146+CD271+ cells were the most abundant DP-MSC populations. Analysis of DP-MSCs expanded in vitro with a medicinal manufacturing approach showed that CD146 was expressed by about 50% of CD56+, CD271+, MSCA-1+, and Stro-1+ cells, and MSCA-1 by 15-30% of CD56+, CD146+, CD271+, and Stro-1+ cells. These ratios remained stable with passages. CD271 and Stro-1 were expressed by <1% of the expanded cell populations. Interestingly, the percentage of CD56+ cells strongly increased from P1 (25%) to P4 (80%) both in all sub-populations studied. CD146+CD56+, MSCA-1+CD56+, and CD146+MSCA-1+ cells were the most abundant DP-MSCs at the end of P4. These results established that DP-MSCs constitute a heterogeneous mixture of cells in pulp tissue in vivo and in culture, and that their phenotype is modified upon in vitro expansion. Further studies are needed to determine whether co-expression of specific MSC markers confers DP cells specific properties that could be used for the regeneration of human tissues, including the dental pulp, with standardized cell-based medicinal products.

Manufacturing of dental pulp cell-based products from human third molars: current strategies and future investigations.

In recent years, mesenchymal cell-based products have been developed to improve surgical therapies aimed at repairing human tissues. In this context, the tooth has recently emerged as a valuable source of stem/progenitor cells for regenerating orofacial tissues, with easy access to pulp tissue and high differentiation potential of dental pulp mesenchymal cells. International guidelines now recommend the use of standardized procedures for cell isolation, storage and expansion in culture to ensure optimal reproducibility, efficacy and safety when cells are used for clinical application. However, most dental pulp cell-based medicinal products manufacturing procedures may not be fully satisfactory since they could alter the cells biological properties and the quality of derived products. Cell isolation, enrichment and cryopreservation procedures combined to long-term expansion in culture media containing xeno- and allogeneic components are known to affect cell phenotype, viability, proliferation and differentiation capacities. This article focuses on current manufacturing strategies of dental pulp cell-based medicinal products and proposes a new protocol to improve efficiency, reproducibility and safety of these strategies.

Production of Human Dental Pulp Cells with a Medicinal Manufacturing Approach.

INTRODUCTION: Human dental pulp cells (HDPCs) are generally isolated and cultured with xenogeneic products and in stress conditions that may alter their biological features. However, guidelines from the American Food and Drug Administration and the European Medicines Agency currently recommend the use of protocols compliant with medicinal manufacturing. Our aim was to design an ex vivo procedure to produce large amounts of HDPCs for dentin/pulp and bone engineering according to these international recommendations. METHODS: HDPC isolation was performed from pulp explant cultures. After appropriate serum-free medium selection, cultured HDPCs were immunophenotyped with flow cytometry. Samples were then cryopreserved for 510 days. The post-thaw cell doubling time was determined up to passage 4 (P4). Karyotyping was performed by G-band analysis. Osteo/odontoblastic differentiation capability was determined after culture in a differentiation medium by gene expression analysis of osteo/odontoblast markers and mineralization quantification. RESULTS: Immunophenotyping of cultured HDPCs revealed a mesenchymal profile of the cells, some of which also expressed the stem/progenitor cell markers CD271, Stro-1, CD146, or MSCA-1. The post-thaw cell doubling times were stable and similar to fresh HDPCs. Cells displayed no karyotype abnormality. Alkaline phosphatase, osteocalcin, and dentin sialophosphoprotein gene expression and culture mineralization were increased in post-thaw HDPC cultures performed in differentiation medium compared with cultures in control medium. CONCLUSIONS: We successfully isolated, cryopreserved, and amplified human dental pulp cells with a medicinal manufacturing approach. These findings may constitute a basis on which to investigate how HDPC production can be optimized for human pulp/dentin and bone tissue engineering.

Cartilage tissue engineering: molecular control of chondrocyte differentiation for proper cartilage matrix reconstruction.

BACKGROUND: Articular cartilage defects are a veritable therapeutic problem because therapeutic options are very scarce. Due to the poor self-regeneration capacity of cartilage, minor cartilage defects often lead to osteoarthritis. Several surgical strategies have been developed to repair damaged cartilage. Autologous chondrocyte implantation (ACI) gives encouraging results, but this cell-based therapy involves a step of chondrocyte expansion in a monolayer, which results in the loss in the differentiated phenotype. Thus, despite improvement in the quality of life for patients, reconstructed cartilage is in fact fibrocartilage. Successful ACI, according to the particular physiology of chondrocytes in vitro, requires active and phenotypically stabilized chondrocytes. SCOPE OF REVIEW: This review describes the unique physiology of cartilage, with the factors involved in its formation, stabilization and degradation. Then, we focus on some of the most recent advances in cell therapy and tissue engineering that open up interesting perspectives for maintaining or obtaining the chondrogenic character of cells in order to treat cartilage lesions. MAJOR CONCLUSIONS: Current research involves the use of chondrocytes or progenitor stem cells, associated with "smart" biomaterials and growth factors. Other influential factors, such as cell sources, oxygen pressure and mechanical strain are considered, as are recent developments in gene therapy to control the chondrocyte differentiation/dedifferentiation process. GENERAL SIGNIFICANCE: This review provides new information on the mechanisms regulating the state of differentiation of chondrocytes and the chondrogenesis of mesenchymal stem cells that will lead to the development of new restorative cell therapy approaches in humans. This article is part of a Special Issue entitled Matrix-mediated cell behaviour and properties.