Enhancing the Functionality of Immunoisolated Human SC-ßeta Cell Clusters through Prior Resizing.

The transplantation of immunoisolated stem cell derived beta cell clusters (SC-ß) has the potential to restore physiological glycemic control in patients with type I diabetes. This strategy is attractive as it uses a renewable ß-cell source without the need for systemic immune suppression. SC-ß cells have been shown to reverse diabetes in immune compromised mice when transplanted as ≈300 µm diameter clusters into sites where they can become revascularized. However, immunoisolated SC-ß clusters are not directly revascularized and rely on slower diffusion of nutrients through a membrane. It is hypothesized that smaller SC-ß cell clusters (≈150 µm diameter), more similar to islets, will perform better within immunoisolation devices due to enhanced mass transport. To test this, SC-ß cells are resized into small clusters, encapsulated in alginate spheres, and coated with a biocompatible A10 polycation coating that resists fibrosis. After transplantation into diabetic immune competent C57BL/6 mice, the "resized" SC-ß cells plus the A10 biocompatible polycation coating induced long-term euglycemia in the mice (6 months). After retrieval, the resized A10 SC-ß cells exhibited the least amount of fibrosis and enhanced markers of ß-cell maturation. The utilization of small SC-ß cell clusters within immunoprotection devices may improve clinical translation in the future.

A wireless, battery-free device enables oxygen generation and immune protection of therapeutic xenotransplants in vivo.

The immune isolation of cells within devices has the potential to enable long-term protein replacement and functional cures for a range of diseases, without requiring immune suppressive therapy. However, a lack of vasculature and the formation of fibrotic capsules around cell immune-isolating devices limits oxygen availability, leading to hypoxia and cell death in vivo. This is particularly problematic for pancreatic islet cells that have high O2 requirements. Here, we combine bioelectronics with encapsulated cell therapies to develop the first wireless, battery-free oxygen-generating immune-isolating device (O2-Macrodevice) for the oxygenation and immune isolation of cells in vivo. The system relies on electrochemical water splitting based on a water-vapor reactant feed, sustained by wireless power harvesting based on a flexible resonant inductive coupling circuit. As such, the device does not require pumping, refilling, or ports for recharging and does not generate potentially toxic side products. Through systematic in vitro studies with primary cell lines and cell lines engineered to secrete protein, we demonstrate device performance in preventing hypoxia in ambient oxygen concentrations as low as 0.5%. Importantly, this device has shown the potential to enable subcutaneous (SC) survival of encapsulated islet cells, in vivo in awake, freely moving, immune-competent animals. Islet transplantation in Type I Diabetes represents an important application space, and 1-mo studies in immune-competent animals with SC implants show that the O2-Macrodevice allows for survival and function of islets at high densities (~1,000 islets/cm2) in vivo without immune suppression and induces normoglycemia in diabetic animals.

Partially Oxidized Alginate as a Biodegradable Carrier for Glucose-Responsive Insulin Delivery and Islet Cell Replacement Therapy.

Self-regulated insulin delivery that mimics native pancreas function has been a long-term goal for diabetes therapies. Two approaches towards this goal are glucose-responsive insulin delivery and islet cell transplantation therapy. Here, biodegradable, partially oxidized alginate carriers for glucose-responsive nanoparticles or islet cells are developed. Material composition and formulation are tuned in each of these contexts to enable glycemic control in diabetic mice. For injectable, glucose-responsive insulin delivery, 0.5 mm 2.5% oxidized alginate microgels facilitate repeat dosing and consistently provide 10 days of glycemic control. For islet cell transplantation, 1.5 mm capsules comprised of a blend of unoxidized and 2.5% oxidized alginate maintain cell viability and glycemic control over a period of more than 2 months while reducing the volume of nondegradable material implanted. These data show the potential of these biodegradable carriers for controlled drug and cell delivery for the treatment of diabetes with limited material accumulation in the event of multiple doses.

Microgel encapsulated nanoparticles for glucose-responsive insulin delivery.

An insulin delivery system that self-regulates blood glucose levels has the potential to limit hypoglycemic events and improve glycemic control. Glucose-responsive insulin delivery systems have been developed by coupling glucose oxidase with a stimuli-responsive biomaterial. However, the challenge of achieving desirable release kinetics (i.e., insulin release within minutes after glucose elevation and duration of release on the order of weeks) still remains. Here, we develop a glucose-responsive delivery system using encapsulated glucose-responsive, acetalated-dextran nanoparticles in porous alginate microgels. The nanoparticles respond rapidly to changes in glucose concentrations while the microgels provide them with protection and stability, allowing for extended glucose-responsive insulin release. This system reduces blood sugar in a diabetic mouse model at a rate similar to naked insulin and responds to a glucose challenge 3 days after administration similarly to a healthy animal. With 2 doses of microgels containing 60 IU/kg insulin each, we are able to achieve extended glycemic control in diabetic mice for 22 days.

A retrievable implant for the long-term encapsulation and survival of therapeutic xenogeneic cells.

The long-term function of transplanted therapeutic cells typically requires systemic immune suppression. Here, we show that a retrievable implant comprising a silicone reservoir and a porous polymeric membrane protects human cells encapsulated in it after implant transplantation in the intraperitoneal space of immunocompetent mice. Membranes with pores 1 µm in diameter allowed host macrophages to migrate into the device without the loss of transplanted cells, whereas membranes with pore sizes <0.8 µm prevented their infiltration by immune cells. A synthetic polymer coating prevented fibrosis and was necessary for the long-term function of the device. For >130 days, the device supported human cells engineered to secrete erythropoietin in immunocompetent mice, as well as transgenic human cells carrying an inducible gene circuit for the on-demand secretion of erythropoietin. Pancreatic islets from rats encapsulated in the device and implanted in diabetic mice restored normoglycaemia in the mice for over 75 days. The biocompatible device provides a retrievable solution for the transplantation of engineered cells in the absence of immunosuppression.

Biomaterials for Personalized Cell Therapy.

Cell therapy has already had an important impact on healthcare and provided new treatments for previously intractable diseases. Notable examples include mesenchymal stem cells for tissue regeneration, islet transplantation for diabetes treatment, and T cell delivery for cancer immunotherapy. Biomaterials have the potential to extend the therapeutic impact of cell therapies by serving as carriers that provide 3D organization and support cell viability and function. With the growing emphasis on personalized medicine, cell therapies hold great potential for their ability to sense and respond to the biology of an individual patient. These therapies can be further personalized through the use of patient-specific cells or with precision biomaterials to guide cellular activity in response to the needs of each patient. Here, the role of biomaterials for applications in tissue regeneration, therapeutic protein delivery, and cancer immunotherapy is reviewed, with a focus on progress in engineering material properties and functionalities for personalized cell therapies.

Micropattern size-dependent endothelial differentiation from a human induced pluripotent stem cell line.

The multifaceted extracellular milieu presents biochemical and biophysical stimuli that influence stem cell differentiation. Two-dimensional (2D) micropatterned substrates allow the presentation of these cues in spatially defined geometries that have been demonstrated to guide stem cell fate decisions. Leveraging stem cells to reconstruct microvasculature, made up of an inner lining of endothelial cells (ECs) supported by pericytes, is critical to tissue-engineering advances; thus, methods to improve endothelial differentiation efficiency are vital to these efforts. In this study, we examine the hypothesis that the diameter of micropatterned islands influences endothelial differentiation from human induced pluripotent stem cells (hiPSCs). Comparing island diameters of 80, 140, 225 and 500 µm, we found that co-cultures of control ECs and pericytes did not yield variable ratios of cell types; however, when hiPSCs were differentiated toward a bicellular population of ECs and pericytes on these varying micropattern feature sizes, we found that smaller islands promoted EC differentiation efficiency, yielding a derived population composed of 70% ECs, which exhibited a greater sprouting propensity. Differentiation on the largest feature size exhibited a smaller EC yield, similar to that on non-patterned substrates. Taken together, these data demonstrate that micropatterned islands of varying diameters can be used to modulate EC differentiation efficiency. Copyright © 2015 John Wiley & Sons, Ltd.

Characterizing human pluripotent-stem-cell-derived vascular cells for tissue engineering applications.

Tissue-engineered constructs are rendered useless without a functional vasculature owing to a lack of nutrients and oxygen. Cell-based approaches to reconstruct blood vessels can yield structures that mimic native vasculature and aid transplantation. Vascular derivatives of human induced pluripotent stem cells (hiPSCs) offer opportunities to generate patient-specific therapies and potentially provide unlimited amounts of vascular cells. To be used in engineered vascular constructs and confer therapeutic benefit, vascular derivatives must exhibit additional key properties, including extracellular matrix (ECM) production to confer structural integrity and growth factor production to facilitate integration. In this study, we examine the hypothesis that vascular cells derived from hiPSCs exhibit these critical properties to facilitate their use in engineered tissues. hiPSCs were codifferentiated toward early vascular cells (EVCs), a bicellular population of endothelial cells (ECs) and pericytes, under varying low-oxygen differentiation conditions; subsequently, ECs were isolated and passaged. We found that EVCs differentiated under low-oxygen conditions produced copious amounts of collagen IV and fibronectin as well as vascular endothelial growth factor and angiopoietin 2. EVCs differentiated under atmospheric conditions did not demonstrate such abundant ECM expression, but exhibited greater expression of angiopoietin 1. Isolated ECs could proliferate up to three passages while maintaining the EC marker vascular endothelial cadherin. Isolated ECs demonstrated an increased propensity to produce ECM compared with their EVC correlates and took on an arterial-like fate. These findings illustrate that hiPSC vascular derivates hold great potential for therapeutic use and should continue to be a preferred cell source for vascular construction.