Retrograde Solubility of Methylammonium Lead Iodide in γ-Butyrolactone Does Not Enhance the Uniformity of Continuously Coated Films.

Halide perovskite thin films can be the centerpiece of high-performance solar cells, light-emitting diodes, and other optoelectronic devices if the films are of high uniformity and relatively free of pinholes and other defects. A common strategy to form dense films from solution has been to generate a high density of nuclei by rapidly increasing supersaturation, for example, by timely application of an antisolvent or forced convection. In this work, we examine the role of retrograde solubility, wherein solubility decreases with increasing temperature, as a means of increasing the nucleation density and film coverage of slot-die-coated methylammonium lead iodide (MAPbI3) from γ-butyrolactone (GBL) solution. Coverage was investigated as a function of the substrate temperature and the presence and temperature of an air knife. Results were considered within the framework of the dimensionless modified Biot number, which quantifies the interplay between evaporation and horizontal diffusion. Moderate temperatures and a heated air knife improved film coverage and morphology by enhanced nucleation up to ∼80 °C. However, despite the dense nucleation enabled by retrograde solubility, slow evaporation as a result of the low vapor pressure of GBL, combined with Ostwald ripening at high temperatures, prevented the deposition of void-free, device-quality films. This work has provided a more detailed understanding of the interplay between perovskite processing, solvent parameters, and film morphology and ultimately indicates the obstacles to forming dense, uniform films from solvents with high boiling points even in the presence of rapid nucleation.

Quasi-2D Model to Predict Solid Microstructure in Drying Thin Films.

The microstructure of solid coatings produced by solution processing is highly dependent on the coupling between growth, solute diffusion, and solvent evaporation. Here, a quasi-2D numerical model coupling drying and solidification is used to predict the transient lateral growth of two adjacent nuclei growing toward each other. Lateral gradients of the solute and solvent influence the evolution of film thickness and solid growth rate. The important process parameters and solvent properties are captured by the dimensionless Peclet number (Pe) and the Biot number (Bi), modified by an aspect ratio defined by the film thickness and distance between nuclei. By variation of Pe and Bi, the evaporation dynamics and aspect ratio are shown to largely determine the coating quality. These findings are applied to drying thin films of crystallizing halide perovskites, demonstrating a convenient process map for capturing the relationship between the modified Bi and well-defined coating regimes, which may be generalized for any solution-processed thin film coating systems.

Interfacial Topochemical Fluoridation of MAPbI3 by Fluoropolymers.

Herein it is demonstrated that, under conditions relevant to perovskite synthesis (>140 °C in air), fluoride can topochemically react across the interface between a halide perovskite and a fluoropolymer when in close contact, thereby creating a small quantity of strongly bonded lead fluoride species. The quantity increases with temperature and processing duration. Photoinduced charge carrier lifetime provides a metric for the resulting changes in electronic structure of the perovskite. Under short-duration and/or moderate temperature processing, fluoride transfer to the perovskite yields increased carrier lifetimes, up to 3-fold longer than control samples, which is attributed to passivation of surface defects. Under more forcing conditions, the trend reverses: excessive fluoridation leads to shortened carrier lifetimes, which is ascribed to substantial interfacial formation of PbF2. It is demonstrated that an interface with bulk crystalline PbF2 quenches perovskite photoluminescence, likely due to PbF2 serving as an electron acceptor for the conduction band of MAPbI3.

Fate and Exposure Assessment of Pb Leachate from Hypothetical Breakage Events of Perovskite Photovoltaic Modules.

Emerging lead halide perovskite (LHP) photovoltaics are undergoing intense research and development due to their outstanding efficiency and potential for low manufacturing costs that render them competitive with existing photovoltaic (PV) technologies. While today's efforts are focused on stability and scalability of LHPs, the toxicity of lead (Pb) remains a major challenge to their large-scale commercialization. Here, we present a screening-level, EPA-compliant model of fate and transport of Pb leachate in groundwater, soil, and air, following hypothetical catastrophic breakage of LHP PV modules in conceptual utility-scale sites. We estimated exposure point concentrations of Pb in each medium and found that most of the Pb is sequestered in soil. Exposure point concentrations of Pb from the perovskite film fell well below EPA maximum permissible limits in groundwater and air even upon catastrophic release from PV modules at large scales. Background Pb levels in soil can influence soil regulatory compliance, but the highest observed concentrations of perovskite-derived Pb would not exceed EPA limits under our assumptions. Nonetheless, regulatory limits are not definitive thresholds of safety, and the potential for increased bioavailability of perovskite-derived Pb may warrant additional toxicity assessment to further characterize public health risks.

Designing Strong Optical Absorbers via Continuous Tuning of Interparticle Interaction in Colloidal Gold Nanocrystal Assemblies.

We program the optical properties of colloidal Au nanocrystal (NC) assemblies via an unconventional ligand hybridization (LH) strategy to precisely engineer interparticle interactions and design materials with optical properties difficult or impossible to achieve in bulk form. Long-chain hydrocarbon ligands used in NC synthesis are partially exchanged, from 0% to 100%, with compact thiocyanate ligands by controlling the reaction time for exchange. The resulting NC assemblies show transmittance, reflectance, optical permittivity, and direct-current (DC) resistivity that continuously traverse a dielectric-metal transition, providing analog tuning of their physical properties, unlike the digital control realized by complete exchange with ligands of varying length. Exploiting this LH strategy, we create Au NC assemblies that are strong, ultrathin film optical absorbers, as seen by a 6× increase in the extinction of infrared light compared to that in bulk Au thin films and by a temperature rise of 20 °C upon illumination with 808 nm light. Our LH strategy may be applied to the design of materials constructed from NCs of different size, shape, and composition for specific applications.

Influence of Compact, Inorganic Surface Ligands on the Electrophoretic Deposition of Semiconductor Nanocrystals at Low Voltage.

For electrophoretic deposition (EPD) to achieve its potential as a method for assembling functional semiconductors, it will be necessary to understand both what governs the threshold voltage for deposition and how to reduce that threshold. Herein we demonstrate that postsynthetic modification of the surface chemistry of all-inorganic copper zinc tin sulfide (CZTS) nanocrystals (NCs) enables EPD at voltages of as low as 4 V, which is a 3-fold or greater reduction over previous examples of nonoxide semiconductors. The chemical exchange of the original surfactant-based NC-surface ligands with selenide ions yields essentially bare, highly surface-charged NCs. Thus, both the electrophoretic mobility and electrochemical reactivity of these particles are increased, favoring deposition. In situ imaging of the reactor during deposition provides a quantitative measure of the electric field in the bulk of the reactor, yielding fundamental insight into the reaction mechanism and mass transport in the low-voltage regime. A crossover from mass-transport-limited to reaction-rate-limited EPD is observed. Under the latter conditions, the influence of gravity can result in boundary-layer instabilities that are severely deleterious to the uniformity of the deposited film, despite the gravitational stability of the colloids in the absence of electric fields. This knowledge is applied to deposit thick, uniform, and crack-free films without sintering, from stable, well-dispersed colloidal starting materials.

Quantitative Phase-Change Thermodynamics and Metastability of Perovskite-Phase Cesium Lead Iodide.

The perovskite phase of cesium lead iodide (α-CsPbI3 or "black" phase) possesses favorable optoelectronic properties for photovoltaic applications. However, the stable phase at room temperature is a nonfunctional "yellow" phase (δ-CsPbI3). Black-phase polycrystalline thin films are synthesized above 330 °C and rapidly quenched to room temperature, retaining their phase in a metastable state. Using differential scanning calorimetry, it is shown herein that the metastable state is maintained in the absence of moisture, up to a temperature of 100 °C, and a reversible phase-change enthalpy of 14.2 (±0.5) kJ/mol is observed. The presence of atmospheric moisture hastens the black-to-yellow conversion kinetics without significantly changing the enthalpy of the transition, indicating a catalytic effect, rather than a change in equilibrium due to water adduct formation. These results delineate the conditions for trapping the desired phase and highlight the significant magnitude of the entropic stabilization of this phase.

High Chloride Doping Levels Stabilize the Perovskite Phase of Cesium Lead Iodide.

Cesium lead iodide possesses an excellent combination of band gap and absorption coefficient for photovoltaic applications in its perovskite phase. However, this is not its equilibrium structure under ambient conditions. In air, at ambient temperature it rapidly transforms to a nonfunctional, so-called yellow phase. Here we show that chloride doping, particularly at levels near the solubility limit for chloride in a cesium lead iodide host, provides a new approach to stabilizing the functional perovskite phase. In order to achieve high doping levels, we first co-deposit colloidal nanocrystals of pure cesium lead chloride and cesium lead iodide, thereby ensuring nanometer-scale mixing even at compositions that potentially exceed the bulk miscibility of the two phases. The resulting nanocrystal solid is subsequently fused into a polycrystalline thin film by chemically induced, room-temperature sintering. Spectroscopy and X-ray diffraction indicate that the chloride is further dispersed during sintering and a polycrystalline mixed phase is formed. Using density functional theory (DFT) methods in conjunction with nudged elastic band techniques, low-energy pathways for interstitial chlorine diffusion into a majority-iodide lattice were identified, consistent with the facile diffusion and fast halide exchange reactions observed. By comparison to DFT-calculated values (with the PBE exchange-correlation functional), the relative change in band gap and the lattice contraction are shown to be consistent with a Cl/I ratio of a few percent in the mixed phase. At these incorporation levels, the half-life of the functional perovskite phase in a humid atmosphere increases by more than an order of magnitude.

Ultrafast electron trapping in ligand-exchanged quantum dot assemblies.

We use time-integrated and time-resolved photoluminescence and absorption to characterize the low-temperature optical properties of CdSe quantum dot solids after exchanging native aliphatic ligands for thiocyanate and subsequent thermal annealing. In contrast to trends established at room temperature, our data show that at low temperature the band-edge absorptive bleach is dominated by 1S3/2h hole occupation in the quantum dot interior. We find that our ligand treatments, which bring enhanced interparticle coupling, lead to faster surface state electron trapping, a greater proportion of surface-related photoluminescence, and decreased band-edge photoluminescence lifetimes.

Gate-induced carrier delocalization in quantum dot field effect transistors.

We study gate-controlled, low-temperature resistance and magnetotransport in indium-doped CdSe quantum dot field effect transistors. We show that using the gate to accumulate electrons in the quantum dot channel increases the "localization product" (localization length times dielectric constant) describing transport at the Fermi level, as expected for Fermi level changes near a mobility edge. Our measurements suggest that the localization length increases to significantly greater than the quantum dot diameter.

Air-stable, nanostructured electronic and plasmonic materials from solution-processable, silver nanocrystal building blocks.

Herein we describe a room-temperature, chemical process to transform silver nanocrystal solids, deposited from colloidal solutions, into highly conductive, corrosion-resistant, optical and electronic materials with nanometer-scale architectures. After assembling the nanocrystal solids, we treated them with a set of simple, compact, organic and inorganic reagents: ammonium thiocyanate, ammonium chloride, potassium hydrogen sulfide, and ethanedithiol. We find that each reagent induces unique changes in the structure and composition of the resulting solid, giving rise to films that vary from insulating to, in the case of thiocyanate, conducting with a remarkably low resistivity of 8.8×10(-6) Ω·cm, only 6 times that of bulk silver. We show that thiocyanate mediates the spontaneous sintering of nanocrystals into structures with a roughness of less than 1/10th of the wavelength of visible light. We demonstrate that these solution-processed, low-resistivity, optically smooth films can be patterned, using imprint lithography, into conductive electrodes and plasmonic mesostructures with programmable resonances. We observe that thiocyanate-treated solids exhibit significantly retarded atmospheric corrosion, a feature that dramatically increases the feasibility of employing silver for electrical and plasmonic applications.

Solution-based stoichiometric control over charge transport in nanocrystalline CdSe devices.

Using colloidal CdSe nanowire (NW) field-effect transistors (FETs), we demonstrated the dependence of carrier transport on surface stoichiometry by chemically manipulating the atomic composition of the NW surface. A mild, room-temperature, wet-chemical process was devised to introduce cadmium, selenium, or sulfur adatoms at the surface of the NWs in completed devices. Changes in surface composition were tested for by energy dispersive spectroscopy and inductively coupled plasma-atomic emission spectroscopy and through the use of the vibrational reporter thiocyanate. We found that treatment with cadmium acetate enhances electron currents, while treatment with sodium selenide or sodium sulfide suppressed them. The efficacy of doping CdSe NWs through subsequent thermal diffusion of indium was highly dependent on the surface composition. While selenium-enriched CdSe NW FETs were characterized by little to no electron currents, when combined with indium, they yielded semimetallic devices. Sulfur-enriched, indium-doped devices also displayed dramatically enhanced electron currents, but to a lesser extent than selenium and formed FETs with desirable ION/IOFF >10(6). The atomic specificity of the electronic behavior with different surface chalcogens suggested indium was bound to chalcogens at the NW surface, indicating commonalities with and implications for indium-containing CdSe nanocrystal films. Low temperature measurements of indium-doped CdSe NW FETs showed no evidence of impurity scattering, further supporting the existence of an indium-chalcogen interaction at the surface rather than in the core of the NW.

In situ repair of high-performance, flexible nanocrystal electronics for large-area fabrication and operation in air.

Colloidal semiconductor nanocrystal (NC) thin films have been integrated in light-emitting diodes, solar cells, field-effect transistors (FETs), and flexible, electronic circuits. However, NC devices are typically fabricated and operated in an inert environment since the reactive surface and high surface-to-volume ratio of NC materials render them sensitive to oxygen, water, and many solvents. This sensitivity has limited device scaling and large-scale device integration achievable by conventional fabrication technologies, which generally require ambient air and wet-chemical processing. Here, we present a simple, effective route to reverse the detrimental effects of chemical and environmental exposure, by incorporating, in situ, a chemical agent, namely, indium metal, which is thermally triggered to diffuse and repair the damage. Taking advantage of the recovery process, CdSe NC FETs are processed in air, patterned using the solvents of lithography, and packaged by atomic layer deposition to form large-area and flexible high-performance NC devices that operate stably in air.

Quantitative dissection of hydrogen bond-mediated proton transfer in the ketosteroid isomerase active site.

Hydrogen bond networks are key elements of protein structure and function but have been challenging to study within the complex protein environment. We have carried out in-depth interrogations of the proton transfer equilibrium within a hydrogen bond network formed to bound phenols in the active site of ketosteroid isomerase. We systematically varied the proton affinity of the phenol using differing electron-withdrawing substituents and incorporated site-specific NMR and IR probes to quantitatively map the proton and charge rearrangements within the network that accompany incremental increases in phenol proton affinity. The observed ionization changes were accurately described by a simple equilibrium proton transfer model that strongly suggests the intrinsic proton affinity of one of the Tyr residues in the network, Tyr16, does not remain constant but rather systematically increases due to weakening of the phenol-Tyr16 anion hydrogen bond with increasing phenol proton affinity. Using vibrational Stark spectroscopy, we quantified the electrostatic field changes within the surrounding active site that accompany these rearrangements within the network. We were able to model these changes accurately using continuum electrostatic calculations, suggesting a high degree of conformational restriction within the protein matrix. Our study affords direct insight into the physical and energetic properties of a hydrogen bond network within a protein interior and provides an example of a highly controlled system with minimal conformational rearrangements in which the observed physical changes can be accurately modeled by theoretical calculations.

Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals.

We demonstrate optical metamaterial design using colloidal gold nanocrystal building blocks. In the solid state, chemically exchanging the nanocrystals' surface-capping molecules provides a tailorable dielectric-to-metal transition exhibiting a 10(10) range in DC conductivity and dielectric permittivity ranging from everywhere positive to everywhere negative throughout the visible-to-near-IR. Direct, wide-area nanoimprinting of subwavelength superstructures at room temperature, on plastic and glass substrates, affords plasmonic resonances ranging from 660 to 1070 nm, in agreement with numerical simulations.

Metal-enhanced upconversion luminescence tunable through metal nanoparticle-nanophosphor separation.

We have demonstrated amplification of luminescence in upconversion nanophosphors (UCNPs) of hexagonal phase NaYF(4) (ß-NaYF(4)) doped with the lanthanide dopants Yb(3+), Er(3+) or Yb(3+), Tm(3+) by close proximity to metal nanoparticles (NPs). We present a configuration in which close-packed monolayers of UCNPs are separated from a dense multilayer of metal NPs (Au or Ag) by a nanometer-scale oxide grown by atomic layer deposition. Luminescence enhancements were found to be dependent on the thickness of the oxide spacer layer and the type of metal NP with enhancements of up to 5.2-fold proximal to Au NPs and of up to 45-fold proximal to Ag NPs. Concomitant shortening of the UCNP luminescence decay time and rise time is indicative of the enhancement of the UCNP luminescence induced by resonant plasmonic coupling and nonresonant near-field enhancement from the metal NP layer, respectively.

Bandlike transport in strongly coupled and doped quantum dot solids: a route to high-performance thin-film electronics.

We report bandlike transport in solution-deposited, CdSe QD thin-films with room temperature field-effect mobilities for electrons of 27 cm(2)/(V s). A concomitant shift and broadening in the QD solid optical absorption compared to that of dispersed samples is consistent with electron delocalization and measured electron mobilities. Annealing indium contacts allows for thermal diffusion and doping of the QD thin-films, shifting the Fermi energy, filling traps, and providing access to the bands. Temperature-dependent measurements show bandlike transport to 220 K on a SiO(2) gate insulator that is extended to 140 K by reducing the interface trap density using an Al(2)O(3)/SiO(2) gate insulator. The use of compact ligands and doping provides a pathway to high performance, solution-deposited QD electronics and optoelectronics.

Quantitative, directional measurement of electric field heterogeneity in the active site of ketosteroid isomerase.

Understanding the electrostatic forces and features within highly heterogeneous, anisotropic, and chemically complex enzyme active sites and their connection to biological catalysis remains a longstanding challenge, in part due to the paucity of incisive experimental probes of electrostatic properties within proteins. To quantitatively assess the landscape of electrostatic fields at discrete locations and orientations within an enzyme active site, we have incorporated site-specific thiocyanate vibrational probes into multiple positions within bacterial ketosteroid isomerase. A battery of X-ray crystallographic, vibrational Stark spectroscopy, and NMR studies revealed electrostatic field heterogeneity of 8 MV/cm between active site probe locations and widely differing sensitivities of discrete probes to common electrostatic perturbations from mutation, ligand binding, and pH changes. Electrostatic calculations based on active site ionization states assigned by literature precedent and computational pK(a) prediction were unable to quantitatively account for the observed vibrational band shifts. However, electrostatic models of the D40N mutant gave qualitative agreement with the observed vibrational effects when an unusual ionization of an active site tyrosine with a pK(a) near 7 was included. UV-absorbance and (13)C NMR experiments confirmed the presence of a tyrosinate in the active site, in agreement with electrostatic models. This work provides the most direct measure of the heterogeneous and anisotropic nature of the electrostatic environment within an enzyme active site, and these measurements provide incisive benchmarks for further developing accurate computational models and a foundation for future tests of electrostatics in enzymatic catalysis.

Thiocyanate-capped PbS nanocubes: ambipolar transport enables quantum dot based circuits on a flexible substrate.

We report the use of thiocyanate as a ligand for lead sulfide (PbS) nanocubes for high-performance, thin-film electronics. PbS nanocubes, self-assembled into thin films and capped with the thiocyanate, exhibit ambipolar characteristics in field-effect transistors. The nearly balanced, high mobilities for electrons and holes enable the fabrication of CMOS-like inverters with promising gains of ∼22 from a single semiconductor material. The mild chemical treatment and low-temperature processing conditions are compatible with plastic substrates, allowing the realization of flexible, nonsintered quantum dot circuits.

Thiocyanate-capped nanocrystal colloids: vibrational reporter of surface chemistry and solution-based route to enhanced coupling in nanocrystal solids.

Ammonium thiocyanate (NH(4)SCN) is introduced to exchange the long, insulating ligands used in colloidal nanocrystal (NC) synthesis. The short, air-stable, environmentally benign thiocyanate ligand electrostatically stabilizes a variety of semiconductor and metallic NCs in polar solvents, allowing solution-based deposition of NCs into thin-film NC solids. NH(4)SCN is also effective in replacing ligands on NCs after their assembly into the solid state. The spectroscopic properties of this ligand provide unprecedented insight into the chemical and electronic nature of the surface of the NCs. Spectra indicate that the thiocyanate binds to metal sites on the NC surface and is sensitive to atom type and NC surface charge. The short, thiocyanate ligand gives rise to significantly enhanced electronic coupling between NCs as evidenced by large bathochromic shifts in the absorption spectra of CdSe and CdTe NC thin films and by conductivities as high as (2 ± 0.7) × 10(3) Ω(-1) cm(-1) for Au NC thin films deposited from solution. NH(4)SCN treatment of PbTe NC films increases the conductivity by 10(13), allowing the first Hall measurements of nonsintered NC solids, with Hall effect mobilities of 2.8 ± 0.7 cm(2)/(V·s). Thiocyanate-capped CdSe NC thin films form photodetectors exhibiting sensitive photoconductivity of 10(-5) Ω(-1) cm(-1) under 30 mW/cm(2) of 488 nm illumination with I(photo)/I(dark) > 10(3) and form n-channel thin-film transistors with electron mobilities of 1.5 ± 0.7 cm(2)/(V·s), a current modulation of >10(6), and a subthreshold swing of 0.73 V/decade.