Highly efficient eco-friendly sodium titanate sorbents of Cs(i), Sr(ii), Co(ii) and Eu(iii): synthesis, characterization and detailed adsorption study.

Development of useful all-around materials which can quickly and efficiently adsorb radionuclides in response to environmental radioactive contamination is an urgent research objective. In response to this need, our team developed a simple preparation method for stable sodium titanates which can serve as efficient agents for removal of radionuclides from water. With an emphasis on an environmentally friendly synthesis, the resulting materials were defined by a range of means and methods measuring e.g. pH, ionic strength, contact time or metal ion concentration in order to assess their potential for use and applications as sorbents. The data obtained from measurements revealed rapid removal kinetics (up to 10 minutes), wide range of pH use and high equilibrium capacity. The maximum amount of adsorbed ions as calculated from the Langmuir isotherm was equal to 206.3 mg g-1 for Cs(i), 60.0 mg g-1 for Sr(ii), 50.2 mg g-1 for Co(ii) and 103.4 mg g-1 for Eu(iii), significantly exceeding published data obtained with related materials. The removal mechanism is most likely ion exchange followed by complexation reactions, as indicated by TEM/EDS analyses. Given their extraordinary sorption capacity and facile synthesis under mild conditions, these materials are promising candidates for the efficient removal of radionuclides from aqueous solutions during the clean-up of radioactive pollution in the environment.

Silver nanoparticles loaded on lactose/alginate: in situ synthesis, catalytic degradation, and pH-dependent antibacterial activity.

We present the in situ synthesis of silver nanoparticles (AgNPs) through ionotropic gelation utilizing the biodegradable saccharides lactose (Lac) and alginate (Alg). The lactose reduced silver ions to form AgNPs. The crystallite structure of the nanocomposite AgNPs@Lac/Alg, with a mean size of 4-6 nm, was confirmed by analytical techniques. The nanocomposite exhibited high catalytic performance in degrading the pollutants methyl orange and rhodamine B. The antibacterial activity of the nanocomposite is pH-dependent, related to the alterations in surface properties of the nanocomposite at different pH values. At pH 6, the nanocomposite demonstrated the highest antibacterial activity. These findings suggest that this nanocomposite has the potential to be tailored for specific applications in environmental and medicinal treatments, making it a highly promising material.

An Electrochemical Sensor for Detection of Neuroblastoma Markers: Complexation Studies as a Tool for the Selection of a Suitable Receptor for Electrode Coating.

Homovanillate (HVA) and vanilmandelate (VMA) are recognized markers of diseases, including neuroblastoma. However, their detection in urine represents a challenging task due to the complexity of the matrix. Here, a design, synthesis and thorough investigation of polymerizable urea-based receptors interacting with HVA and VMA are reported. The selection of receptor with the best anion recognition properties for electrode coating is based on 1 H-NMR and UV-Vis complexation studies. The sensor is prepared by electropolymerization with progress monitoring by cyclic voltammetry. The deposited layer is characterized by IR and scanning electron microscopy. The obtained sensor shows an electrochemical impedance spectroscopy response to VMA with linear range 9.9×10-6 to 1.2×10-3  M and LOD of 3.4×10-6  M. The sensor selectivity was demonstrated by the determination of VMA level in the presence of 16 µM HVA and in artificial urine with and without phosphates, with standard deviations of 0.11, 0.17 and 0.09, respectively.

Effect of Multiply Twinned Ag(0) Nanoparticles on Photocatalytic Properties of TiO2 Nanosheets and TiO2 Nanostructured Thin Films.

Ag-decorated TiO2 nanostructured materials are promising photocatalysts. We used non-standard cryo-lyophilization and ArF laser ablation methods to produce TiO2 nanosheets and TiO2 nanostructured thin films decorated with Ag nanoparticles. Both methods have a common advantage in that they provide a single multiply twinned Ag(0) characterized by {111} twin boundaries. Advanced microscopy techniques and electron diffraction patterns revealed the formation of multiply twinned Ag(0) structures at elevated temperatures (500 °C and 800 °C). The photocatalytic activity was demonstrated by the efficient degradation of 4-chlorophenol and Total Organic Carbon removal using Ag-TiO2 nanosheets, because the multiply twinned Ag(0) served as an immobilized photocatalytically active center. Ag-TiO2 nanostructured thin films decorated with multiply twinned Ag(0) achieved improved photoelectrochemical water splitting due to the additional induction of a plasmonic effect. The photocatalytic properties of TiO2 nanosheets and TiO2 nanostructured thin films were correlated with the presence of defect-twinned structures formed from Ag(0) nanoparticles with a narrow size distribution, tuned to between 10 and 20 nm. This work opens up new possibilities for understanding the defects generated in Ag-TiO2 nanostructured materials and paves the way for connecting their morphology with their photocatalytic activity.

Surface Properties of 1DTiO2 Microrods Modified with Copper (Cu) and Nanocavities.

This work deals with Cu-modified 1DTiO2 microrods (MRs) and their surface properties. The pristine lyophilized precursor Cu_1DTiO2, prepared by an environmentally friendly cryo-lyophilization method, was further annealed in the temperature interval from 500 to 950 °C. The microstructure of all samples was characterized by electron microscopy (SEM/EDS and HRTEM/SAED), X-ray powder diffraction (XRD), infrared spectroscopy, simultaneous DTA/TGA thermoanalytical measurement, and mass spectroscopy (MS). Special attention was paid to the surface structure and porosity. The 1D morphology of all annealed samples was preserved, but their surface roughness varied due to anatase-rutile phase transformation and the change of the nanocrystals habits due to nanocavities formation after releasing of confined ice-water. The introduction of 2 wt.% Cu as electronically active second species significantly reduced the direct bandgap of 1DTiO2 in comparison with undoped TiO2 and the standard Degussa TiO2_P25. All samples were tested for their UV absorption properties and H2 generation by PEC water splitting. We presented a detailed study on the surface characteristics of Cu doped 1DTiO2 MRs due to gain a better idea of their photocatalytic activity.

Chemical vapor deposition of germanium-rich CrGe x nanowires.

Chemical vapor deposition was applied to synthetize nanostructured deposits containing several sorts of nanoobjects (i.e., nanoballs, irregular particles, and nanowires). Analytical techniques, that is, high-resolution transmission electron microscopy, scanning electron microscopy, electron dispersive X-ray analysis, selected area electron diffraction, and X-ray photoelectron spectroscopy, showed that unlike nanoballs and particles composed of crystalline germanium, the layer was made of chromium germanide CrGe x . The nanowires possessed a complex structure, namely a thin crystalline germanium core and amorphous CrGe x coating. The composition of the nanowire coating was [Cr]/[Ge] = 1:(6-7). The resistance of the nanowire-deposit system was estimated to be 2.7 kΩ·cm using an unique vacuum contacting system.

Novel perspectives of laser ablation in liquids: the formation of a high-pressure orthorhombic FeS phase and absorption of FeS-derived colloids on a porous surface for solar-light photocatalytic wastewater cleaning.

A pulsed Nd : YAG laser ablation of FeS in water and ethanol produces FeS-derived colloidal nanoparticles that absorb onto immersed porous ceramic substrates and create solar-light photocatalytic surfaces. The stability, size distribution and zeta potential of the nanoparticles were assessed by dynamic light scattering. Raman, UV-Vis and XP spectroscopy and electron microscopy reveal that the sol nanoparticles have their outmost layer composed of ferrous and ferric sulphates and those produced in water are made of high-pressure orthorhombic FeS, cubic magnetite Fe3O4 and tetragonal maghemite γ-Fe2O3, while those formed in ethanol contain hexagonal FeS and cubic magnetite Fe3O4. Both colloids absorb solar light and their adsorption to porous ceramic surfaces creates functionalized ceramic surfaces that induce methylene blue degradation by daylight. The laser induced process thus offers an easy and efficient way for the functionalization of porous surfaces by photocatalytic nanoparticles that avoids aggregation in the liquid phase. The formation of an orthorhombic high-pressure FeS phase stable under ambient conditions is the first example of high-pressure structures produced by laser ablation in liquid without the assistance of an electric field.

The relationship between microstructure and photocatalytic behavior in lanthanum-modified 2D TiO2 nanosheets upon annealing of a freeze-cast precursor.

Titanium dioxide modified with 3 wt% La was prepared via a green freeze-casting method, and its photocatalytic activity was tested in terms of its ability to degrade 4-chlorophenol (4-CP) and remove total organic carbon (TOC). Under annealing conditions, the freeze-cast precursor was transformed into an La-modified anatase with a well-defined 2D TiO2 nanosheet morphology. Rietveld refinement of the X-ray diffraction patterns confirmed the substitutional nature of the La cation that induced local structural variations and involved subtle ion displacement in the TiO2 lattice due to the ionic size effect. Despite nearly identical tetragonal structures, replacement of Ti with La alters the photocatalytic activity through a reduction in band gap energies and an increase in charge carrier mobility. Material annealed at 650 °C exhibited the highest photocatalytic performance and achieved efficient TOC removal. Upon annealing at 800 °C, nanoscale lanthanum-enriched regions were generated due to the diffusive migration of La cations and phase transition from anatase to rutile. The La3+ cation, acting as a structural promoter, supported 2D TiO2 growth with well controlled crystallite size, surface area and porosity. La3+ could be regarded as a potential electronic promoter that can reduce the band gap of 2D TiO2 nanosheets and can provide a signature of the electron transfer and carrier charge separation. Both methods, kinetics of degradation of 4-CP and TOC, provided similar results, revealing that the photocatalytic activity under UV light irradiation increased in the order 950C < 500 °C < 800 °C < 650 °C < TiO2-P25.

Chromate adsorption on selected soil minerals: Surface complexation modeling coupled with spectroscopic investigation.

This study investigates the mechanisms of Cr(VI) adsorption on natural clay (illite and kaolinite) and synthetic (birnessite and ferrihydrite) minerals, including its speciation changes, and combining quantitative thermodynamically based mechanistic surface complexation models (SCMs) with spectroscopic measurements. Series of adsorption experiments have been performed at different pH values (3-10), ionic strengths (0.001-0.1M KNO3), sorbate concentrations (10(-4), 10(-5), and 10(-6)M Cr(VI)), and sorbate/sorbent ratios (50-500). Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy were used to determine the surface complexes, including surface reactions. Adsorption of Cr(VI) is strongly ionic strength dependent. For ferrihydrite at pH <7, a simple diffuse-layer model provides a reasonable prediction of adsorption. For birnessite, bidentate inner-sphere complexes of chromate and dichromate resulted in a better diffuse-layer model fit. For kaolinite, outer-sphere complexation prevails mainly at lower Cr(VI) loadings. Dissolution of solid phases needs to be considered for better SCMs fits. The coupled SCM and spectroscopic approach is thus useful for investigating individual minerals responsible for Cr(VI) retention in soils, and improving the handling and remediation processes.

Facile preparation of g-C3N4 modified BiOCl hybrid photocatalyst and vital role of frontier orbital energy levels of model compounds in photoactivity enhancement.

A novel hybrid photocatalyst (g-C3N4/BiOCl) using g-C3N4 series modified with BiOCl having controllable mass ratios among the g-C3N4 and BiOCl molecules was prepared through hydrolysis process of Bi(3+) onto g-C3N4, using NaBiO3 and g-C3N4 produced from pyrolysis of melamine as the starting materials. The microstructure, morphology and optical properties of the synthesized g-C3N4/BiOCl were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Vis diffuse reflection spectroscopy (DRS) and photoluminescence (PL) emission spectroscopy. The photoactivity of the g-C3N4/BiOCl was evaluated by photodegradation of Rhodamine B(RhB) from water as a model toxic contaminant. The RhB photodegradation results revealed that the photocatalytic activity of g-C3N4/BiOCl hybrid photocatalyst (mass ratio of g-C3N4/BiOCl equals to 2:8) exhibits superior activity as compared with pure BiOCl under visible light irradiation. The effects of pH, initial concentration of the model contaminant as well as the catalyst recycling on the photoactivity (or photostability) of g-C3N4/BiOCl were investigated in depth as well. Quantum chemical calculations revealed that the photoactivity enhancement is strongly dependent on the active role played by the frontier orbital energy levels of dye molecules and a probable correlation of "structure-activity" relationship was established.

High-aspect-ratio and high-flatness Cu3(SiGe) nanoplatelets prepared by chemical vapor deposition.

Cu3(SiGe) nanoplatelets were synthesized by low-pressure chemical vapor deposition of a SiH3C2H5/Ge2(CH3)6 mixture on a Cu-substrate at 500 degrees C, total pressure of 110-115 Pa, and Ge/Si molar ratio of 22. The nanoplatelets with composition Cu76Si15Ge12 are formed by the 4'-phase, and they are flattened perpendicular to the [001] direction. Their lateral dimensions reach several tens of micrometers in size, but they are only about 50 nm thick. Their surface is extremely flat, with measured root mean square roughness R(q) below 0.2 nm. The nanoplatelets grow via the non-catalytic vapor-solid mechanism and surface growth. In addition, nanowires and nanorods of various Cu-Si-Ge alloys were also obtained depending on the experimental conditions. Morphology of the resulting Cu-Si-Ge nanoobjects is very sensitive to the experimental parameters. The formation of nanoplatelets is associated with increased amount of Ge in the alloy.

From shelled Ge nanowires to SiC nanotubes.

Shelled germanium nanowires up to 100 nm in diameter and several micrometers in length were prepared by low pressure chemical vapor deposition (LPCVD) of tris(trimethylsilyl)germane (SiMe(3))(3)GeH. Vapors of the precursor were deposited on tantalum substrates in an oven at 365 degrees C. Subsequently, the products were annealed at 700 degrees C in vacuum. The wires consist of a crystalline Ge core surrounded by a two-layer jacket. The presence of hexagonal Ge in the core was documented in some of the nanowires. The inner jacket is formed by amorphous germanium, the outer part by an Si/C material. By annealing at 900 degrees C, germanium in the core is expelled and nanotubes formed by the Si/C material remain. The samples were studied by SEM, HRTEM, EDX, FTIR and Raman spectroscopy, and the XRD technique.