Evaluation of 3D nano-macro porous bioactive glass scaffold for hard tissue engineering.

Recently, nano-macro dual-porous, three-dimensional (3D) glass structures were developed for use as bioscaffolds for hard tissue regeneration, but there have been concerns regarding the interconnectivity and homogeneity of nanopores in the scaffolds, as well as the cytotoxicity of the environment deep inside due to limited fluid access. Therefore, mercury porosimetry, nitrogen absorption, and TEM have been used to characterize nanopore network of the scaffolds. In parallel, viability of MG 63 human osteosarcoma cells seeded on scaffold surface was investigated by fluorescence, confocal and electron microscopy methods. The results show that cells attach, migrate and penetrate inside the glass scaffold with high proliferation and viability rate. Additionally, scaffolds were implanted under the skin of a male New Zealand rabbit for in vivo animal test. Initial observations show the formation of new tissue with blood vessels and collagen fibers deep inside the implanted scaffolds with no obvious inflammatory reaction. Thus, the new nano-macro dual-porous glass structure could be a promising bioscaffold for use in regenerative medicine and tissue engineering for bone regeneration.

Gap junction protein connexin-43 interacts directly with microtubules.

Gap junctions are specialized cell-cell junctions that mediate intercellular communication. They are composed of connexin proteins, which form transmembrane channels for small molecules [1, 2]. The C-terminal tail of connexin-43 (Cx43), the most widely expressed connexin member, has been implicated in the regulation of Cx43 channel gating by growth factors [3-5]. The Cx43 tail contains various protein interaction sites, but little is known about binding partners. To identify Cx43-interacting proteins, we performed pull-down experiments using the C-terminal tail of Cx43 fused to glutathione-S-transferase. We find that the Cx43 tail binds directly to tubulin and, like full-length Cx43, sediments with microtubules. Tubulin binding to Cx43 is specific in that it is not observed with three other connexins. We established that a 35-amino acid juxtamembrane region in the Cx43 tail, which contains a presumptive tubulin binding motif, is necessary and sufficient for microtubule binding. Immunofluorescence and immunoelectron microscopy studies reveal that microtubules extend to Cx43-based gap junctions in contacted cells. However, intact microtubules are dispensable for the regulation of Cx43 gap-junctional communication. Our findings suggest that, in addition to its well-established role as a channel-forming protein, Cx43 can anchor microtubule distal ends to gap junctions and thereby might influence the properties of microtubules in contacted cells.

Expression of fluorescently tagged connexins: a novel approach to rescue function of oligomeric DsRed-tagged proteins.

A novel, brilliantly red fluorescent protein, DsRed has become available recently opening up a wide variety of experimental opportunities for double labeling and fluorescence resonance electron transfer experiments in combination with green fluorescent protein (GFP). Unlike in the case of GFP, proteins tagged with DsRed were often found to aggregate within the cell. Here we report a simple method that allows rescuing the function of an oligomeric protein tagged with DsRed. We demonstrate the feasibility of this approach on the subunit proteins of an oligomeric membrane channel, gap junction connexins. Additionally, DsRed fluorescence was easily detected 12-16 h post transfection, much earlier than previously reported, and could readily be differentiated from co-expressed GFP. Thus, this approach can eliminate the major drawbacks of this highly attractive autofluorescent protein.

High resolution, fluorescence deconvolution microscopy and tagging with the autofluorescent tracers CFP, GFP, and YFP to study the structural composition of gap junctions in living cells.

High-resolution, fluorescence deconvolution (DV) microscopy was implemented to obtain a detailed view of the organization and structural composition of gap junctions assembled from one or two different connexin isotypes in live and fixed cells. To visualize gap junctions, the structural protein components of gap junction channels, the connexin polypeptides alpha1(Cx43), beta1(Cx32), and beta2(Cx26), were tagged on their C-termini with the autofluorescent tracers green fluorescent protein (GFP), and its cyan (CFP), and yellow (YFP) color variants. Tagged connexins were expressed in transiently transfected HeLa cells. Comprehensive analysis including dye-transfer analysis demonstrated that the tagged connexins trafficked, assembled, and packed normally into functional gap junction channel plaques. Such gap junction plaques were examined by single, dual, and triple-color DV microscopy. High-resolution images and three-dimensional volume reconstructions of gap junction plaques were obtained by this technique, which revealed several new aspects of gap junction structure. Specifically, the studies demonstrated that the mode of channel distribution strictly depends on the connexin isotypes. Here we present such images, and volume reconstructions in context with images obtained by other light, and electron microscopic techniques, such as laser scanning confocal, conventional wide-field fluorescence, thin section, and freeze-fracture electron microscopy. In addition, we give a simple description of the principal mechanisms of DV microscopy, name advantages and disadvantages, and discuss issues such as dual-color imaging using CFP and YFP, spatial resolution, colocalization, and avoiding imaging artifacts.

Distribution and dynamics of gap junction channels revealed in living cells.

To study the structural composition and dynamics of gap junctions in living cells, we tagged their subunit proteins, termed connexins, with the autofluorescent tracer green fluorescent protein (GFP) and its cyan (CFP) and yellow (YFP) color variants. Tagged connexins assembled normally and channels were functional. High-resolution fluorescence images of gap junction plaques assembled from CFP and YFP tagged connexins revealed that the mode of channel distribution is strictly dependent on the connexin isoforms. Co-distribution as well as segregation into well-separated domains was observed. Based on accompanying studies we propose that channel distribution is regulated by intrinsic, connexin isoform specific signals. High-resolution time-lapse images revealed that gap junctions, contrary to previous expectations, are dynamic assemblies of channels. Channels within clusters and clusters themselves are mobile and constantly undergo structural rearrangements. Movements are complex and allow channels to move, comparable to other plasma membrane proteins not anchored to cytoskeletal elements. Comprehensive analysis, however, demonstrated that gap junction channel movements are not driven by diffusion described to propel plasma membrane protein movement. Instead, recent studies suggest that movements of gap junction channels are indirect and predominantly propelled by plasma membrane lipid flow that results from metabolic endo- and exocytosis.

Connexin-specific distribution within gap junctions revealed in living cells.

To study the organization of gap junctions in living cells, the connexin isotypes alpha(1)(Cx43), beta(1)(Cx32) and beta(2)(Cx26) were tagged with the autofluorescent tracer green fluorescent protein (GFP) and its cyan (CFP) and yellow (YFP) color variants. The cellular fate of the tagged connexins was followed by high-resolution fluorescence deconvolution microscopy and time-lapse imaging. Comprehensive analyses demonstrated that the tagged channels were functional as monitored by dye transfer, even under conditions where the channels were assembled solely from tagged connexins. High-resolution images revealed a detailed structural organization, and volume reconstructions provided a three-dimensional view of entire gap junction plaques. Specifically, deconvolved dual-color images of gap junction plaques assembled from CFP- and YFP-tagged connexins revealed that different connexin isotypes gathered within the same plaques. Connexins either codistributed homogeneously throughout the plaque, or each connexin isotype segregated into well-separated domains. The studies demonstrate that the mode of channel distribution strictly depends on the connexin isotypes. Based on previous studies on the synthesis and assembly of connexins I suggest that channel distribution is regulated by intrinsic connexin isotype specific signals.

Biosynthesis and structural composition of gap junction intercellular membrane channels.

Gap junction channels assemble as dodecameric complexes, in which a hexameric connexon (hemichannel) in one plasma membrane docks end-to-end with a connexon in the membrane of a closely apposed cell to provide direct cell-to-cell communication. Synthesis, assembly, and trafficking of the gap junction channel subunit proteins referred to as connexins, largely appear to follow the general secretory pathway for membrane proteins. The connexin subunits can assemble into homo-, as well as distinct hetero-oligomeric connexons. Assembly appears to be based on specific signals located within the connexin polypeptides. Plaque formation by the clustering of gap junction channels in the plane of the membrane, as well as channel degradation are poorly understood processes that are topics of current research. Recently, we tagged connexins with the autofluorescent reporter green fluorescent protein (GFP), and its cyan (CFP), and yellow (YFP) color variants and combined this reporter technology with single, and dual-color, high resolution deconvolution microscopy, computational volume rendering, and time-lapse microscopy to examine the detailed organization, structural composition, and dynamics of gap junctions in live cells. This technology provided for the first time a realistic, three-dimensional impression of gap junctions as they appear in the plasma membranes of adjoining cells, and revealed an excitingly detailed structural organization of gap junctions never seen before in live cells. Here, I summarize recent progress in areas encompassing the synthesis, assembly and structural composition of gap junctions with a special emphasis on the recent results we obtained using cell-free translation/ membrane-protein translocation, and autofluorescent reporters in combination with live-cell deconvolution microscopy.

Cell-free synthesis for analyzing the membrane integration, oligomerization, and assembly characteristics of gap junction connexins.

For gap junction channels to function, their subunit proteins, referred to as connexins, have to be synthesized and inserted into the cell membrane in their native configuration. Like other transmembrane proteins, connexins are synthesized and inserted cotranslationally into the endoplasmic reticulum membrane. Membrane insertion is followed by their assembly and transport to the plasma membrane. Finally, the end-to-end pairing of two half-channels, referred to as connexons, each provided by one of two neighboring cells, and clustering of the channels into larger plaques complete the gap junction channel formation. Gap junction channel formation is further complicated by the potential assembly of homo- as well as heterooligomeric connexons, and the pairing of identical or different connexons into homo- and heterotypic gap junction channels. In this article, I describe the cell-free synthesis approach that we have used to study the biosynthesis of connexins and gap junction channels. Special emphasis is placed on the synthesis of full-length, membrane-integrated connexins, assembly into gap junction connexons, homo- as well as heterooligomerization, and characterization of connexin-specific assembly signals.

Synthesis, assembly and structure of gap junction intercellular channels.

Gap junction membrane channels assemble as dodecameric complexes, in which a hexameric hemichannel (connexon) in one plasma membrane docks end to end with a connexon in the membrane of a closely apposed cell. Steps in the synthesis, assembly and turnover of gap junction channels appear to follow the general secretory pathway for membrane proteins. In addition to homo-oligomeric connexons, different connexin polypeptide subunits can also assemble as hetero-oligomers. The ability to form homotypic and heterotypic channels that consist of two identical or two different connexons, respectively, adds even greater versatility to the functional modulation of gap junction channels. Electron cryocrystallography of recombinant gap junction channels has recently provided direct evidence for alpha-helical folding of at least two of the transmembrane domains within each connexin subunit. The potential to correlate the structure and biochemistry of gap junction channels with recently identified human diseases involving connexin mutations makes this a particularly exciting area of research.

Connexin membrane protein biosynthesis is influenced by polypeptide positioning within the translocon and signal peptidase access.

We reported previously (Falk, M. M., Kumar, N. M., and Gilula, N. B. (1994) J. Cell Biol. 127, 343-355) that the membrane integration of polytopic connexin polypeptides can be accompanied by an inappropriate cleavage that generates amino-terminal truncated connexins. While this cleavage was not detected in vivo, translation in standard cell-free translation/translocation systems resulted in the complete cleavage of all newly integrated connexins. Partial cleavage occurred in heterologous expression systems that correlated with the expression level. Here we report that the transmembrane topology of connexins generated in microsomal membranes was identical to the topology of functional connexins in plasma membranes. Characterization of the cleavage site and reaction showed that the connexins were processed by signal peptidase immediately downstream of their first transmembrane domain in a reaction similar to the removal of signal peptides from pre-proteins. Increasing the length and hydrophobic character of the signal anchor sequence of connexins completely prevented the aberrant cleavage. This result indicates that their signal anchor sequence was falsely recognized and positioned as a cleavable signal peptide within the endoplasmic reticulum translocon, and that this mispositioning enabled signal peptidase to access the cleavage sites. The results provide direct evidence for the involvement of unknown cellular factors in the membrane integration process of connexins.

Cell-free synthesis and assembly of connexins into functional gap junction membrane channels.

Several different gap junction channel subunit isotypes, known as connexins, were synthesized in a cell-free translation system supplemented with microsomal membranes to study the mechanisms involved in gap junction channel assembly. Previous results indicated that the connexins were synthesized as membrane proteins with their relevant transmembrane topology. An integrated biochemical and biophysical analysis indicated that the connexins assembled specifically with other connexin subunits. No interactions were detected between connexin subunits and other co-translated transmembrane proteins. The connexins that were integrated into microsomal vesicles assembled into homo- and hetero-oligomeric structures with hydrodynamic properties of a 9S particle, consistent with the properties reported for hexameric gap junction connexons derived from gap junctions in vivo. Further, cell-free assembled homo-oligomeric connexons composed of beta1 or beta2 connexin were reconstituted into synthetic lipid bilayers. Single channel conductances were recorded from these bilayers that were similar to those measured for these connexons produced in vivo. Thus, this is the first direct evidence that the synthesis and assembly of a gap junction connexon can take place in microsomal membranes. Finally, the cell-free system has been used to investigate the properties of alpha1, beta1 and beta2 connexin to assemble into hetero-oligomers. Evidence has been obtained for a selective interaction between individual connexin isotypes and that a signal determining the potential hetero-oligomeric combinations of connexin isotypes may be located in the N-terminal sequence of the connexins.

Membrane insertion of gap junction connexins: polytopic channel forming membrane proteins.

Connexins, the proteins that form gap junction channels, are polytopic plasma membrane (PM) proteins that traverse the plasma membrane bilayer four times. The insertion of five different connexins into the membrane of the ER was studied by synthesizing connexins in translation-competent cell lysates supplemented with pancreatic ER-derived microsomes, and by expressing connexins in vivo in several eucaryotic cell types. In addition, the subcellular distribution of the connexins was determined. In vitro-synthesis in the presence of microsomes resulted in the signal recognition particle-dependent membrane insertion of the connexins. The membrane insertion of all connexins was accompanied by an efficient proteolytic processing that was dependent on the microsome concentration. Endogenous unprocessed connexins were detectable in the microsomes used, indicating that the pancreatic microsomes serve as a competent recipient in vivo for unprocessed full length connexins. Although oriented with their amino terminus in the cytoplasm, the analysis of the cleavage reaction indicated that an unprecedented processing by signal peptidase resulted in the removal of an amino-terminal portion of the connexins. Variable amounts of similar connexin cleavage products were also identified in the ER membranes of connexin overexpressing cells. The amount generated correlated with the level of protein expression. These results demonstrate that the connexins contain a cryptic signal peptidase cleavage site that can be processed by this enzyme in vitro and in vivo in association with their membrane insertion. Consequently, a specific factor or condition must be required to prevent this aberrant processing of connexins under normal conditions in the cell.

VPg gene amplification correlates with infective particle formation in foot-and-mouth disease virus.

In order to analyze the function of VPg amplification in aphthoviruses, we have undertaken the first mutational analysis of the repetitive VPg-coding region using an improved foot-and-mouth disease virus (FMDV) cDNA clone from which infective viral RNA was synthesized. A set of VPg mutants was constructed by site-directed mutagenesis which includes different VPg deletion mutations, a VPg insertion mutation, and amino acid residue replacement mutations that interfere with binding of the VPg protein to the viral RNA and with its proteolytic processing. Our results revealed that an amazing flexibility in the number of VPgs is tolerated in FMDV. Optimal viability is given when three VPgs are encoded. Deletion as well as insertion of one VPg gene still resulted in infective particle production. Infective particle formation was observed as long as one VPg remained intact. No obvious differences in the individual VPg molecules with regard to their promoting viral RNA synthesis were observed, indicating that all three VPgs can act equally in FMDV replication. Mutant polyprotein processing was comparable to that of the wild-type virus. However, VPg mutants showed reduced viral RNA synthesis levels after infection. The levels of viral RNA synthesis and infective particle formation were found to correlate with the number of functional VPgs left in the mutant virus. These findings suggest a direct VPg gene dosage effect on viral RNA synthesis, with a secondary effect on infective particle formation.

Infectious foot-and-mouth disease virus derived from a cloned full-length cDNA.

A full-length cDNA plasmid of foot-and-mouth disease virus has been constructed. RNA synthesized in vitro by means of a bacteriophage SP6 promoter inserted in front of the cDNA led to the production of infectious particles upon transfection of BHK-21 cells. These particles were also found to be highly infectious for primary bovine kidney cells as well as for baby mice. The difficulty in cloning the foot-and-mouth disease virus cytidyl tract in Escherichia coli was circumvented by joining two separate cloned parts, representing the S and L fragments of the genome, and, in a second step, inserting a dC-dG homopolymer. Homopolymeric sequences of up to 25 cytidyl residues did not lead to the production of virus. Replicons containing poly(C) tracts long enough to permit virus replication were first established in yeast cells. One of these constructs could also be maintained in E. coli and was used to produce infectious RNA in vitro. The length of the poly(C) sequence in this cDNA plasmid was 32 nucleotides. However, the poly(C) tracts of two recombinant viruses found in transfected BHK-21 cells were 60 and 80 nucleotides long, respectively. Possible mechanisms leading to the enlargement of the poly(C) tract during virus replication are discussed.

Foot-and-mouth disease virus protease 3C induces specific proteolytic cleavage of host cell histone H3.

In foot-and-mouth disease virus (FMDV)-infected cells, the disappearance of nuclear protein histone H3 and the simultaneous appearance of a new chromatin-associated protein termed Pi can be observed (P. R. Grigera and S. G. Tisminetzky, Virology 136:10-19, 1984). We sequenced the amino terminus of protein Pi and showed that Pi derives from histone H3 by proteolytic cleavage. The 20 N-terminal amino acid residues of histone H3 are specifically cleaved off early during infection. Truncated histone H3 remains chromatin associated. In addition, we showed that the histone H3-Pi transition is catalyzed by the FMDV 3C protease. The only known function of the viral 3C protease was, until now, the processing of the viral polyprotein. The viral 3C protease is the only FMDV protein required to induce the histone H3-Pi transition, as well as being the only viral protein capable of cleaving histone H3. No viral precursor fusion protein is needed for this specific cleavage as was reported for the processing of the poliovirus P1 precursor polyprotein by 3C/D protease. As the deleted part of the histone H3 corresponds to the presumed regulatory domain involved in the regulation of transcriptionally active chromatin in eucaryotes, it seems possible that this specific cleavage of histone H3 is related to the host cell transcription shutoff reported for several picornaviruses.