Monolithic Two-Terminal Perovskite/CIS Tandem Solar Cells with Efficiency Approaching 25.

Monolithic two-terminal (2T) perovskite/CuInSe2 (CIS) tandem solar cells (TSCs) combine the promise of an efficient tandem photovoltaic (PV) technology with the simplicity of an all-thin-film device architecture that is compatible with flexible and lightweight PV. In this work, we present the first-ever 2T perovskite/CIS TSC with a power conversion efficiency (PCE) approaching 25% (23.5% certified, area 0.5 cm2). The relatively planar surface profile and narrow band gap (∼1.03 eV) of our CIS bottom cell allow us to exploit the optoelectronic properties and photostability of a low-Br-containing perovskite top cell as revealed by advanced characterization techniques. Current matching was attained by proper tuning of the thickness and bandgap of the perovskite, along with the optimization of an antireflective coating for improved light in-coupling. Our study sets the baseline for fabricating efficient perovskite/CIS TSCs, paving the way for future developments that might push the efficiencies to over 30%.

Thermal Stability and Cation Composition of Hybrid Organic-Inorganic Perovskites.

One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI3) and formamidinium cesium lead iodide (FACsPbI3) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.

Effect of Precursor Stoichiometry on the Performance and Stability of MAPbBr3 Photovoltaic Devices.

The wide-bandgap methylammonium lead bromide perovskite is promising for applications in tandem solar cells and light-emitting diodes. Despite its utility, there is a limited understanding of its reproducibility and stability. Herein, the dependence of the properties, performance, and shelf storage of thin films and devices on minute changes to the precursor solution stoichiometry is examined in detail. Although photovoltaic cells based on these solution changes exhibit similar initial performance, shelf storage depends strongly on precursor solution stoichiometry. While all devices exhibit some degree of healing, bromide-deficient films show a remarkable improvement, more than doubling in their photoconversion efficiency. Photoluminescence spectroscopy experiments performed under different atmospheres suggest that this increase is due, in part, to a trap-healing mechanism that occurs upon exposure to the environment. The results highlight the importance of understanding and manipulating defects in lead halide perovskites to produce long-lasting, stable devices.

Effect of Crystal Grain Orientation on the Rate of Ionic Transport in Perovskite Polycrystalline Thin Films.

In this work, we examine the effect of microstructure on ion-migration-induced photoluminescence (PL) quenching in methylammonium lead iodide perovskite films. Thin films were fabricated by two methods: spin-coating, which results in randomly oriented perovskite grains, and zone-casting, which results in aligned grains. As an external bias is applied to these films, migration of ions causes a quenching of the PL signal in the vicinity of the anode. The evolution of this PL-quenched zone is less uniform in the spin-coated devices than in the zone-cast ones, suggesting that the relative orientation of the crystal grains plays a significant role in the migration of ions within polycrystalline perovskite. We simulate this effect via a simple Ising model of ionic motion across grains in the perovskite thin film. The results of this simulation align closely with the observed experimental results, further solidifying the correlation between crystal grain orientation and the rate of ionic transport.

Effect of Ion Migration-Induced Electrode Degradation on the Operational Stability of Perovskite Solar Cells.

Perovskite-based solar cells are promising because of their rapidly improving efficiencies but suffer from instability issues. Recently, it has been claimed that one of the key contributors to the instability of perovskite solar cells is ion migration-induced electrode degradation, which can be avoided by incorporating inorganic hole-blocking layers (HBLs) in the device architecture. In this work, we investigate the operational environmental stability of methylammonium lead iodide perovskite solar cells that contain either an inorganic or organic HBL, with only the former effectively blocking ions from migrating to the metal electrode. This is confirmed by X-ray photoemission spectroscopy measured on the electrodes of degraded devices, where only electrodes of devices with an organic HBL show a significant iodine signal. Despite this, we show that when these devices are degraded under realistic operational conditions (i.e., constant illumination in a variety of atmospheric conditions), both types of devices exhibit nearly identical degradation behavior. These results demonstrate that contrary to prior suggestions, ion-induced electrode degradation is not the dominant factor in perovskite environmental instability under operational conditions.

Fractional deviations in precursor stoichiometry dictate the properties, performance and stability of perovskite photovoltaic devices.

The last five years have witnessed remarkable progress in the field of lead halide perovskite materials and devices. Examining the existing body of literature reveals staggering inconsistencies in the reported results among different research groups with a particularly wide spread in the photovoltaic performance and stability of devices. In this work we demonstrate that fractional, quite possibly unintentional, deviations in the precursor solution stoichiometry can cause significant changes in the properties of the perovskite layer as well as in the performance and stability of perovskite photovoltaic devices. We show that while the absorbance and morphology of the layers remain largely unaffected, the surface composition and energetics, crystallinity, emission efficiency, energetic disorder and storage stability are all very sensitive to the precise stoichiometry of the precursor solution. Our results elucidate the origin of the irreproducibility and inconsistencies of reported results among different groups as well as the wide spread in device performance even within individual studies. Finally, we propose a simple experimental method to identify the exact stoichiometry of the perovskite layer that researchers can employ to confirm their experiments are performed consistently without unintentional variations in precursor stoichiometry.