Synthesis of Unprotected ß-Arylethylamines by Iron(II)-Catalyzed 1,2-Aminoarylation of Alkenes in Hexafluoroisopropanol.

ß-Arylethylamines are prevalent structural motifs in molecules exhibiting biological activity. Here we report a sequential one-pot protocol for the 1,2-aminoarylation of alkenes with hydroxylammonium triflate salts and (hetero)arenes. Unlike existing methods, this reaction provides a direct entry to unprotected ß-arylethylamines with remarkable functional group tolerance, allowing key drug-oriented functional groups to be installed in a two-step process. The use of hexafluoroisopropanol as a solvent in combination with an iron(II) catalyst proved essential to reaching high-value nitrogen-containing molecules.

Halogen bonding effect on electrochemical anion oxidation in ionic liquids.

Three Ionic liquids (ILs) based on an imidazolium core have been compared and used as solvents for the oxidation of various anions. Electrochemical experiments as well as NMR titrations and X-ray diffraction analyses unambiguously confirm the crucial role of non-covalent halogen bonding on the oxidation potentials and consequently the electrochemical window of the respective ILs.

Modulating alkene reactivity from oxygenation to halogenation via electrochemical O2 activation by Mn porphyrin.

Oxidation of organic substrates is achieved in nature under mild conditions thanks to metalloenzymes but remains a challenge for chemists. Herein we show by UV-Vis spectroelectrochemistry that when MnIIITPPCl is electrochemically reduced to MnII in CH2Cl2 under O2, a MnIIO2˙ species is generated. Benzoic anhydride reacts with the latter triggering a catalytic current in cyclic voltammetry. Electrolysis on the catalytic wave in the presence of cyclooctene leads to its oxygenation or halogenation depending on the axial ligand present as reported here for the first time.

Electrocatalytic O2 Activation by Fe Tetrakis(pentafluorophenyl)porphyrin in Acidic Organic Media. Evidence of High-Valent Fe Oxo Species.

O2 activation under mild conditions remains a weighty challenge for chemists. Herein we report a study of electrochemical O2 reductive activation catalyzed by FeIII(F20TPP)Cl, by means of cyclic voltammetry and UV-vis spectroelectrochemistry in acidic solutions of N,N-dimethylformamide. Two parallel catalytic pathways have been evidenced occurring at different overpotentials. At high overpotential a classical electron-proton (EPT) pathway where protonation of Fe peroxo ultimately leads to the formation of high-valent Fe oxo species dominates. At low overpotential a proton-electron (PET) pathway involving a hydrosuperoxo species has been identified.

Probing the Activity of Iron Peroxo Porphyrin Intermediates in the Reaction Layer during the Electrochemical Reductive Activation of O2.

Herein we report the first example of using scanning electrochemical microscopy (SECM) to quantitatively analyze O2 reductive activation in organic media catalyzed by three different Fe porphyrins. For each porphyrin, SECM can provide in one single experiment the redox potential of various intermediates, the association constant of FeII with O2 , and the pKa of the FeIII (OOH- )/ FeIII (OO2- ) couple. The results obtained can contribute to a further understanding of the parameters controlling the catalytic efficiency of the Fe porphyrin towards O2 activation and reduction.

Efficient Visible-Light-Driven CO2 Reduction by a Cobalt Molecular Catalyst Covalently Linked to Mesoporous Carbon Nitride.

Achieving visible-light-driven carbon dioxide reduction with high selectivity control and durability while using only earth abundant elements requires new strategies. Hybrid catalytic material was prepared upon covalent grafting a Co-quaterpyridine molecular complex to semiconductive mesoporous graphitic carbon nitride (mpg-C3N4) through an amide linkage. The molecular material was characterized by various spectroscopic techniques, including XPS, IR, and impedance spectroscopy. It proved to be a selective catalyst for CO production in acetonitrile using a solar simulator with a high 98% selectivity, while being remarkably robust since no degradation was observed after 4 days of irradiation (ca. 500 catalytic cycles). This unique combination of a selective molecular catalyst with a simple and robust semiconductive material opens new pathways for CO2 catalytic light-driven reduction.

Small-molecule activation with iron porphyrins using electrons, photons and protons: some recent advances and future strategies.

Substituted tetraphenyl Fe porphyrins are versatile molecular catalysts for the activation of small molecules (such as O2, H+ or CO2), which could lead to renewable energy storage, the direct production of fuels or new catalytic relevant processes. Herein, we review the recent studies of these earth-abundant metal catalysts for the electrochemical activation of dioxygen on the one hand and for the photostimulated reduction of carbon dioxide on the other hand. These two prototype reactions illustrate how mechanistic studies are the only rational approach to gain fundamental insights into the elementary steps that drive the catalysis and for identification of the key intrinsic parameters controlling the reactivity, offering in turn the possibility to rationally tune the structure of the catalysts as well as the catalytic conditions.

Electrochemically driven interfacial halogen bonding on self-assembled monolayers for anion detection.

Electrochemically driven interfacial halogen bonding between redox-active SAMs and halide anions was quantitatively studied for the first time. The halogen bond donor properties were switched on by electrochemically controlling the oxidation state of the adsorbates. Experimental data and simulation show high binding enhancement towards halide anions compared to homogeneous systems.

Comparative study of non-covalent interactions between cationic N-phenylviologens and halides by electrochemistry and NMR: the halogen bonding effect.

Five N-phenylviologen (PV2+) derivatives have been synthesized and their electrochemical behavior in the presence of halide anions has been studied. Further investigations were carried out by 1H and 19F NMR spectroscopy at different chloride concentrations. This is the first time a systematic study combines cyclic voltammetry and NMR spectroscopy in order to analyse the contribution of halogen bonding among the various non-covalent interactions between iodinated N-phenylviologens. The results show strong evidence for a significant "halogen bonding effect" in the interaction between halides and the iodo-tetrafluoro-phenylviologen PV2+-C6F4I. A significant influence of halogen bonding on reduction potentials of the novel halogen bond donor PV2+-C6F4I has been evidenced resulting in the first example of "inverse redox switching" of an XB-donor being partially deactivated upon reduction. Furthermore the particular binding properties of the perfluorinated derivative PV2+-C6F5 towards chloride are discussed considering a possible contribution of π-anion interaction in solution.

Multianalytical Study of the Binding between a Small Chiral Molecule and a DNA Aptamer: Evidence for Asymmetric Steric Effect upon 3'- versus 5'-End Sequence Modification.

Nucleic acid aptamers are involved in a broad field of applications ranging from therapeutics to analytics. Deciphering the binding mechanisms between aptamers and small ligands is therefore crucial to improve and optimize existing applications and to develop new ones. Particularly interesting is the enantiospecific binding mechanism involving small molecules with nonprestructured aptamers. One archetypal example is the chiral binding between l-tyrosinamide and its 49-mer aptamer for which neither structural nor mechanistic information is available. In the present work, we have taken advantage of a multiple analytical characterization strategy (i.e., using electroanalytical techniques such as kinetic rotating droplet electrochemistry, fluorescence polarization, isothermal titration calorimetry, and quartz crystal microbalance) for interpreting the nature of binding process. Screening of the binding thermodynamics and kinetics with a wide range of aptamer sequences revealed the lack of symmetry between the two ends of the 23-mer minimal binding sequence, showing an unprecedented influence of the 5' aptamer modification on the bimolecular binding rate constant kon and no significant effect on the dissociation rate constant koff. The results we have obtained lead us to conclude that the enantiospecific binding reaction occurs through an induced-fit mechanism, wherein the ligand promotes a primary nucleation binding step near the 5'-end of the aptamer followed by a directional folding of the aptamer around its target from 5'-end to 3'-end. Functionalization of the 5'-end position by a chemical label, a polydA tail, a protein, or a surface influences the kinetic/thermodynamic constants up to 2 orders of magnitude in the extreme case of a surface immobilized aptamer, while significantly weaker effect is observed for a 3'-end modification. The reason is that steric hindrance must be overcome to nucleate the binding complex in the presence of a modification near the nucleation site.

Characterization and Subsequent Reactivity of an Fe-Peroxo Porphyrin Generated by Electrochemical Reductive Activation of O2.

Reductive activation of O2 is achieved by using the [FeIII(F20TPP)Cl] (F20TPP = 5,10,15,20-tetrakis(pentafluorophenyl) porphyrinate) porphyrin through electrochemical reduction of the [FeIII(F20TPP)(O2•-)] superoxo complex. Formation of the [FeIII(F20TPP)(OO)]- peroxo species is monitored by using low-temperature electronic absorption spectroscopy, electron paramagnetic resonance, and cyclic voltammetry. Its subsequent protonation to yield the [FeIII(F20TPP)(OOH)] hydroperoxo intermediate is probed using low-temperature electronic absorption spectroscopy and electron paramagnetic resonance.

Self-assembled monolayer formation of a (N5)Fe(ii) complex on gold electrodes: electrochemical properties and coordination chemistry on a surface.

A coordinatively unsaturated FeII complex bearing a pentadentate ligand (N,N',N'-tris(2-pyridyl-methyl)-1,2-diaminoethane) functionalized with a cyclic disulfide group has been prepared in order to graft reactive metal entities as self-assembled monolayers (SAMs) on gold electrodes. Prior to grafting, exogenous ligand exchange has been investigated by cyclic voltammetry (CV) in solution, showing that the nature of the first coordination sphere (N5)FeII-X (X = Cl-, OTf-, MeCN, acetone) can be tuned, thanks to the control of the chemical conditions. The FeII complex has been immobilized on gold electrodes by spontaneous (passive) adsorption as well as by an electro-assisted method. The resulting SAMs were characterised by XPS and AFM analyses. CV experiments implementing these SAMs as working electrodes showed that the first coordination sphere of the grafted FeII complex can be controlled by adjusting the chemical conditions, similarly to the studies in a homogeneous solution. Finally, the supported FeII complex proved to be reactive with superoxide generated at the electrode surface by reduction of dissolved dioxygen. Under the employed conditions, leaking of the metal complex was not observed.

Interaction of osmium(ii) redox probes with DNA: insights from theory.

In the course of developing ultrasensitive and quantitative electrochemical point-of-care analytical tools for genetic detection of infectious diseases, osmium(ii) metallointercalators were revealed to be suitable and efficient redox probes to monitor the in vitro DNA amplification [Defever etal, Anal. Chem., 2011, 83, 1815-1821]. In this work, we thus propose a complete computational protocol in order to evaluate the affinity between Os(ii) complexes with double-stranded DNA. This protocol is based on molecular dynamics, with the parametrization of the GAFF force field for the Os(ii) complexes presenting an octahedral environment with polypyridine ligands, and QM/QM' calculations to evaluate the binding energy. For three Os(ii) probes and different binding sites, molecular dynamics simulations and interaction energies calculated at the QM/QM' level are successively discussed and compared to experimental data in order to identify the most stable binding sites. The computational protocol we propose should then be used to design more efficient Os(ii) metallointercalators.

Optimization of Experimental Parameters to Explore Small-Ligand/Aptamer Interactions through Use of (1) H†NMR Spectroscopy and Molecular Modeling.

Aptamers constitute an emerging class of molecules designed and selected to recognize any given target that ranges from small compounds to large biomolecules, and even cells. However, the underlying physicochemical principles that govern the ligand-binding process still have to be clarified. A major issue when dealing with short oligonucleotides is their intrinsic flexibility that renders their active conformation highly sensitive to experimental conditions. To overcome this problem and determine the best experimental parameters, an approach based on the design-of-experiments methodology has been developed. Here, the focus is on DNA aptamers that possess high specificity and affinity for small molecules, L-tyrosinamide, and adenosine monophosphate. Factors such as buffer, pH value, ionic strength, Mg(2+) -ion concentration, and ligand/aptamer ratio have been considered to find the optimal experimental conditions. It was then possible to gain new insight into the conformational features of the two ligands by using ligand-observed NMR spectroscopic techniques and molecular mechanics.

Electrochemical controlling and monitoring of halogen bond formation in solution.

Cyclic voltammetry has been used for the first time to probe and to control the formation of non-covalent halogen bonding (XB) via redox switching. These results strongly encourage the use of electrochemistry as an economical and precisely controllable tool for the investigation of XB in solution.

Rational design of a redox-labeled chiral target for an enantioselective aptamer-based electrochemical binding assay.

A series of redox-labeled L-tyrosinamide (L-Tym) derivatives was prepared and the nature of the functional group and the chain length of the spacer were systematically varied in a step-by-step affinity optimization process of the tracer for the L-Tym aptamer. The choice of the labeling position on L-Tym proved to be crucial for the molecular recognition event, which could be monitored by cyclic voltammetry and is based on the different diffusion rates of free and bound targets in solution. From this screening approach an efficient electroactive tracer emerged. Comparable dissociation constants Kd were obtained for the unlabeled and labeled targets in direct or competitive binding assays. The enantiomeric tracer was prepared and its enantioselective recognition by the corresponding anti-D-Tym aptamer was demonstrated. The access to both enantiomeric tracer molecules opens the door for the development of one-pot determination of the enantiomeric excess when using different labels with well-separated redox potentials for each enantiomer.

Switching on/off the chemisorption of thioctic-based self-assembled monolayers on gold by applying a moderate cathodic/anodic potential.

An in situ and real-time electrochemical method has been devised for quantitatively monitoring the self-assembly of a ferrocene-labeled cyclic disulfide derivative (i.e., a thioctic acid derivative) on a polycrystalline gold electrode under electrode polarization. Taking advantage of the high sensitivity, specificity, accuracy, and temporal resolution of this method, we were able to demonstrate an unexpectedly facilitated formation of the redox-active SAM when the electrode was held at a moderate cathodic potential (-0.4 V vs SCE in CH3CN), affording a saturated monolayer from only micromolar solutions in less than 10 min, and a totally impeded SAM growth when the electrode was polarized at a slightly anodic potential (+0.5 V vs SCE in CH3CN). This method literally allows for switching on/off the formation of SAMs under "soft" conditions. Moreover the cyclic disulfide-based SAM was completely desorbed at this potential contrary to the facilitated deposition of a ferrocene-labeled alkanethiol. Such a strikingly contrasting behavior could be explained by an energetically favored release of the thioctic-based SAM through homolytic cleavage of the Au-S bond followed by intramolecular cyclization of the generated thiyl diradicals. Moreover, the absence of a discernible transient faradaic current response during the potential-assisted adsorption/desorption of the redox-labeled cyclic disulfide led us to conclude in a potential-dependent reversible surface reaction where no electron is released or consumed. These results provide new insights into the formation of disulfide-based SAMs on gold but also raise some fundamental questions about the intimate mechanism involved in the facilitated adsorption/desorption of SAMs under electrode polarization. Finally, the possibility to easily and selectively address the formation/removal of thioctic-based SAMs on gold by applying a moderate cathodic/anodic potential offers another degree of freedom in tailoring their properties and in controlling their self-assembly, nanostructuration, and/or release.

Synthesis and characterization of oligonucleotide conjugates bearing electroactive labels.

Oxime bond formation has been applied to the preparation of oligonucleotides labeled with electrochemical ferrocene and viologen labels. Aminooxy functionalized ferrocene and viologen derivatives were prepared by a straightforward route and efficiently conjugated with aldehyde containing oligonucleotides either at 3' or 5' end. Both labels were found to not disturb the recognition properties of the oligonucleotide. The versatility of the method was further demonstrated by preparing bi-functionalized conjugates with a disulfide at 3' end and an electrochemical label at 5' end.

Simple and highly enantioselective electrochemical aptamer-based binding assay for trace detection of chiral compounds.

A new electrochemical methodology is reported for monitoring in homogeneous solution the enantiospecific binding of a small chiral analyte to an aptamer. The principle relies on the difference of diffusion rates between the targeted molecule and the aptamer/target complex, and thus on the ability to more easily electrochemically detect the former over the latter in a homogeneous solution. This electrochemical detection strategy is significant because, in contrast to the common laborious and time-consuming heterogeneous binding approaches, it is based on a simple and fast homogeneous binding assay which does not call for an aptamer conformational change upon ligand binding. The methodology is here exemplified with the specific chiral recognition of trace amounts of l- or d-tyrosinamide by a 49-mer d- or l-deoxyribooligonucleotide receptor. Detection as low as 0.1% of the minor enantiomer in a nonracemic mixture can be achieved in a very short analysis time (<1 min). The assay finally combines numerous attractive features including simplicity, rapidity, low cost, flexibility, low volume samples (few microliters), and homogeneous format.

One dimensional assembly of Mn6 single molecule magnets linked by oligothiophene bridges.

A new 1D coordination polymer comprised of [Mn(III)(6)O(2)(Et-sao)(6)(EtOH)(4)(H(2)O)(2)](2+) units and bithiophene dicarboxylato was synthesized by mixing EtsaoH(2) (salicylaldoxime), H(2)btda (2,2'-bithiophene-5,5'-dicarboxylic acid) and Mn(ClO(4))(2)·6H(2)O in the presence of NEt(4)OH. The crystal structure was determined and consists of Mn(6) clusters bridged by the bithiophene dicarboxylato ligands coordinated to two of the Mn(III) ions of the Mn(6) polynuclear complex. Direct current magnetic measurements show an overall ferromagnetic interaction between the Mn(III) ions within the Mn(6) cluster leading to an S = 12 ground state for the Mn(6) unit. Furthermore, this compound presents single-molecule magnet behaviour. Slow relaxation of the magnetization is observed at low temperature following a thermal activated regime with U(eff) approximately 50 K and tau(0) approximately 2.2 10(-10) s. The magnetic measurements do not show any noticeable interaction between the Mn(6) clusters through the bithiophene dicarboxylato bridges.