Early Stages of Metal Corrosion in Coastal Archaeological Sites: Effects of Chemical Composition in Silver and Copper Alloys.

In this study, metal disks with different chemical composition (two Ag-based alloys and three Cu-based alloys) were buried in the soil of coastal archaeological sites for a period of 15 years. The aim was to naturally induce the growth of corrosion patinas to obtain a deeper insight into the role of alloying elements in the formation of the patinas and into the degradation mechanisms occurring in the very early stages of burial. To reach the aim, the morphological, compositional and structural features of the patinas grown over 15 years were extensively characterized by optical microscopy, field emission scanning electron microscopy coupled with energy dispersive spectrometry, X-ray diffraction and micro-Raman spectroscopy. Results showed that the Cu amount in Ag-based alloys strongly affected the final appearance, as well as the composition and structure of the patinas. Corrosion mechanisms typical of archaeological finds, such as the selective dissolution of Cu, Pb and Zn and internal oxidation of Sn, occurred in the Cu-based alloys, even if areas enriched in Zn and Pb compounds were also detected and attributed to an early stage of degradation. In addition, some unusual and rare compounds were detected in the patinas developed on the Cu-based disks.

A review on inorganic gaseous pollutants in conservation spaces: monitoring instrumentation and indoor concentrations.

This contribution presents the results of a review of scientific literature on gaseous inorganic pollutants monitored in confined indoor spaces housing cultural heritage. A survey on standards suggesting concentration thresholds together with European projects on the topic was provided. Sixty-six scientific articles were systematically selected based on the PRISMA flow diagram over the period 1984-2021 for a total number of 80 case studies mainly located in Europe (64%). Monitoring was mainly performed in museums and galleries (61%), specifically in exhibition rooms (79%). Active devices were rarely employed, whereas passive samplers, exposed in situ and then laboratory-analysed, were mostly used for nitrogen dioxide and sulphur dioxide monitoring. Direct-reading continuous devices were widely used for ozone monitoring. It was found that average concentrations of ozone were below 5 ppb in only 50% of cases, nitrogen dioxide below 10 ppb in more than 60% of cases, nitric oxide below 5 ppb in 30% of cases, nitric and nitrous acid below 1 ppb in less than 50% of cases, sulphur dioxide below 2 ppb in more than 60% of cases, and hydrogen sulphide below 0.1 ppb in only 25% of cases. Comparisons were performed following the thresholds suggested in the literature. The lowest concentration values were usually associated to the use of mechanical ventilation systems equipped with air filters and to non-urban case studies. The low number of case studies can be due to the difficulties to perform monitoring in conservation spaces with current instruments. Further research should be conducted to uniform standards that suggest instruments' requirements and pollutant thresholds to limit degradation on cultural materials.

Unearthed opium: development of a UHPLC-MS/MS method for the determination of Papaver somniferum alkaloids in Daunian vessels.

Introduction: The analysis of organic residue in ancient vessels to investigate early-age civilization habits is an important archeological application that needs advanced analytical methods. However, these procedures should meet inherent requisites such as low sampling invasiveness and high sensitivity for trace analysis. This study deals with the development of advanced analytical methods for the detection of opium alkaloids in ceramic vessels and its first application to the study of Daunian pots dating back to the VIII-IV sec BC. Methods: All the stages of the analytical procedure, from sampling to analysis, were carefully optimized. Concerning sampling, the traditional scraping approach was compared with a swabbing strategy which permitted minimizing sample encroachment. Extraction was based on pressurized liquid extraction or ultrasound-assisted liquid extraction, followed by dispersive liquid-liquid microextraction, which allowed concentration enrichment. On the other hand, a UHPLC-MS/MS method was specifically developed and validated to obtain reliable data. Some Daunian pots, belonging to the Ceci-Macrini private archeological collection, were selected for sample withdrawal as their iconography could suggest opium usage. Results: Several of the analyzed samples resulted positive to thebaine and less frequently to morphine and codeine; furthermore, 70% of the analyzed items tested positive for at least one opium alkaloid. Positive findings were common to all the samples collected in the pots, suggesting that scraping and swabbing provided comparable results and validating this unusual sampling strategy. All samples were additionally analyzed by UHPLC-HRMS to further improve the confidence level of the identified compounds. The obtained results shed new light on the hypothesis of opium usage by the ancient Daunian civilization. Furthermore, this study provided suitable analytical tools for further investigations on the same topic, with a good level of confidence in the quality of the results.

New Advances in Dye Analyses: In Situ Gel-Supported Liquid Extraction from Paint Layers and Textiles for SERS and HPLC-MS/MS Identification.

To date, it is still not possible to obtain exhaustive information about organic materials in cultural heritage without sampling. Nonetheless, when studying unique objects with invaluable artistic or historical significance, preserving their integrity is a priority. In particular, organic dye identification is of significant interest for history and conservation research, but it is still hindered by analytes' low concentration and poor fastness. In this work, a minimally invasive approach for dye identification is presented. The procedure is designed to accompany noninvasive analyses of inorganic substances for comprehensive studies of complex cultural heritage matrices, in compliance with their soundness. Liquid extraction of madder, turmeric, and indigo dyes was performed directly from paint layers and textiles. The extraction was supported by hydrogels, which themselves can undergo multitechnique analyses in the place of samples. After extraction, Ag colloid pastes were applied on the gels for SERS analyses, allowing for the identification of the three dyes. For the HPLC-MS/MS analyses, re-extraction of the dyes was followed by a clean-up step that was successfully applied on madder and turmeric. The colour change perceptivity after extraction was measured with colorimetry. The results showed ΔE values mostly below the upper limit of rigorous colour change, confirming the gentleness of the procedure.

Inside the History of Italian Coloring Industries: An Investigation of ACNA Dyes through a Novel Analytical Protocol for Synthetic Dye Extraction and Characterization.

The introduction of synthetic dyes completely changed the industrial production and use of colorants for art materials. From the synthesis of the first synthetic dye, mauveine, in 1856 until today, artists have enjoyed a wider range of colors and selection of chemical properties than was ever available before. However, the introduction of synthetic dyes introduced a wider variety and increased the complexity of the chemical structures of marketed dyes. This work looks towards the analysis of synthetically dyed objects in heritage collections, applying an extraction protocol based on the use of ammonia, which is considered favorable for natural anthraquinone dyes but has never before been applied to acid synthetic dyes. This work also presents an innovative cleanup step based on the use of an ion pair dispersive liquid-liquid microextraction for the purification and preconcentration of historical synthetic dyes before analysis. This approach was adapted from food science analysis and is applied to synthetic dyes in heritage science for the first time in this paper. The results showed adequate recovery of analytes and allowed for the ammonia-based extraction method to be applied successfully to 15 samples of suspected azo dyes from the Azienda Coloranti Nazionali e Affini (ACNA) synthetic dye collection, identified through untargeted HPLC-HRMS analyses.

Smartphone-Based Electrochemical Biosensor for On-Site Nutritional Quality Assessment of Coffee Blends.

This work aimed to develop an easy-to-use smartphone-based electrochemical biosensor to quickly assess a coffee blend's total polyphenols (Phs) content at the industrial and individual levels. The device is based on a commercial carbon-based screen-printed electrode (SPE) modified with multi-walled carbon nanotubes (CNTs) and gold nanoparticles (GNPs). At the same time, the biological recognition element, Laccase from Trametes versicolor, TvLac, was immobilized on the sensor surface by using glutaraldehyde (GA) as a cross-linking agent. The platform was electrochemically characterized to ascertain the influence of the SPE surface modification on its performance. The working electrode (WE) surface morphology characterization was obtained by scanning electron microscopy (SEM) and Fourier-transform infrared (FT-IR) imaging. All the measurements were carried out with a micro-potentiostat, the Sensit Smart by PalmSens, connected to a smartphone. The developed biosensor provided a sensitivity of 0.12 µA/µM, a linear response ranging from 5 to 70 µM, and a lower detection limit (LOD) of 2.99 µM. Afterward, the biosensor was tested for quantifying the total Phs content in coffee blends, evaluating the influence of both the variety and the roasting degree. The smartphone-based electrochemical biosensor's performance was validated through the Folin-Ciocâlteu standard method.

Applying Gel-Supported Liquid Extraction to Tutankhamun's Textiles for the Identification of Ancient Colorants: A Case Study.

The identification of the dyes present on a linen fragment from the tomb of Pharaoh Tutankhamun is the objective of the present study. Fiber optic reflectance spectroscopy (FORS) was applied to the archaeological sample for preliminary identification of the dyes and to better choose the extraction methodology for different areas of the sample. The innovative gel-supported micro-extraction with agar gel and the Nanorestore Gel® High Water Retention (HWR) gel were applied to the archaeological sample after testing of the best concentration for the extraction of the agar gels substrates, performed on laboratory mock-ups by means of UV-Vis transmittance spectroscopy. Immediately after extraction, Ag colloidal pastes were applied on the gel surface and Surface Enhanced Raman Scattering (SERS) analysis was performed directly on them. The combination of information deriving from FORS and SERS spectra resulted in the successful identification of both indigo and madder and, in hypothesis, of their degradation products.

Natural based products for cleaning copper and copper alloys artefacts.

Copper alloys objects can deteriorate their conservation state through irreversible corrosion. Since in the cultural heritage field every artefact is unique and any loss irreplaceable, solutions for conservation are needed. Hence, there is the necessity to stop the corrosion process with a suitable cleaning and conservation process to avoid further degradation processes without changing its morphological aspect. Chelating solutions are commonly used in chemical cleaning, mainly sodium salts of ethylenediaminetetraacetic acid (EDTA). However, it is resistant to water purification procedures and is not biodegradable. The goal of this study was to see if applying an ecologically friendly chelating agent as an alternative to EDTA cleaning procedures for cultural heritage was suitable. In this study were chosen six natural-based chelators that could be a new green non-toxic alternative to EDTA in corrosion-inhibiting properties. They were tested for cleaning copper artefacts exposed to atmospheric environment in polluted areas. The study considered four amino acids, a glucoheptonate (CSA) and an industrial green chelator (GLDA). The effectiveness was tested on corrosion copper compounds and on laboratory corroded copper sheets. Finally, the cleaning efficacy was tested on four Roman coins and a modern copper painting. To define the cleaning efficacy, surface analytical investigations have been carried out by means ICP-OES, UV-VIS, µ-Raman, spectro-colorimetry, XRD and FTIR. Among the amino acids, alanine was the most effective, showing an unaltered noble patina and a good effective copper recovery from corrosion patinas.

ASu@MNPs-based electrochemical immunosensor for vitamin D3 serum samples analysis.

We report a new sensitive label-free electrochemical immunosensor to detect Vitamin D3 (25-OHD3) in untreated serum samples. To this aim, a graphite screen printed electrode (SPE) was modified using cysteamine (CYM) functionalized core-shell magnetic nanoparticles (Au@MNPs) then, the 25-OHD3 antibody (AbD) was immobilized via glutaraldehyde crosslinking. The several steps involved in the immunosensor development and 25-OHD3 analysis were monitored by using differential pulse voltammetry (DPV). The developed immunosensor showed a LOD of 2.4 ng mL-1 and a linear range between 7.4 and 70 ng mL-1. The effectiveness of the immunosensor in human serum analysis was assessed by comparing the results obtained with the chemiluminescence-immunoassay (CLIA) reference method. The high sensitivity and excellent agreement with the reference method suggest its potential use as a POCT to monitor hypovitaminosis 25-OHD levels.

Photons for Photography: A First Diagnostic Approach to Polaroid Emulsion Transfer on Paper in Paolo Gioli's Artworks.

The aim of this research is to study and diagnose for the first time the Polaroid emulsion transfer in the contemporary artist Paolo Gioli's artworks to provide preliminary knowledge about the materials of his artworks and the appropriate protocols which can be applied for future studies. The spectral analysis performed followed a multi-technical approach first on the mock-up samples created following Gioli's technique and on one original artwork of Gioli, composed by: FORS (Fiber Optics Reflectance), Raman, and FTIR (Fourier-Transform InfraRed) spectroscopies. These techniques were chosen according to their completely non-invasiveness and no requirement for sample collection. The obtained spectra from FTIR were not sufficient to assign the dyes found in the transferred Polaroid emulsion. However, they provided significant information about the cellulose-based materials. The most diagnostic results were obtained from FORS for the determination of the dye developers present in the mock-up sample which was obtained from Polacolor Type 88 and from Paolo Gioli's original artwork created with Polacolor type 89.

Polymer composition analysis of plastic debris ingested by loggerhead turtles (Caretta caretta) in Southern Tyrrhenian Sea through ATR-FTIR spectroscopy.

The ingestion of anthropogenic plastic debris by marine wildlife is widespread in the Mediterranean Sea. The endangered status (in the IUCN Red List) of Loggerhead turtle (Caretta caretta, Linnaeus, 1758) is a consequence of its vulnerability. In this study, macro-/meso-plastics (5-170 mm) collected from faeces of twelve loggerhead turtles rescued (live) in the Aeolian Archipelago (Southern Tyrrhenian Sea, Italy) were analyzed by size, weight, shape, color and polymer type through Attenuated Total Reflectance Fourier-Transform Infrared Spectroscopy (ATR-FTIR). The defecation rate during hospitalization (7-14 days) varied among turtles (from 0.08 to 0.58). The mean number of plastic expulsions (2.7 ± 1.8 items for turtle) was higher during the 5th day of hospitalization (Kruskal-Wallis test, P = 0.01). However, the mean number of plastic-like items defecated during the common days of hospitalization did not vary among turtles (Kruskal-Wallis test, P > 0.05). All turtles were found to have ingested plastic. A total of 114 debris items were recovered from their faeces, 113 of which were identified as plastic. Their color was mostly white-transparent (64.9%) and light (19.3%). Shape was mainly fragments (52.6%), sheets (38.6%), followed by nylon, net-fragments, elastic plastic, foamed plastic and industrial granules (8.8%). Meso-plastics (5-25 mm) represented 72% of the total number of debris and were found more frequently in turtle with Curved Carapace Length (CCL) ≤ 60 cm (CCL = 30-60 cm, n = 5) than those with CCL >60 cm (CCL = 60-71 cm, n = 7). Plastic items were composed mainly of polyethylene (48.2%) and polypropylene (34.2%). Polypropylene (R2 = 0.95, P < 0.001) and polyisoprene (R2 = 0.45, P = 0.017) were more common in meso-plastics while polyethylene (R2 = 0.44, P < 0.01) in macro-plastics. Finally, high-density polyethylene, polyvinyl chloride, polyamide and polyurethane were also found in some turtles. This study reveals high spreads of plastic contamination in faeces of both turtles with CCL ≤60 cm and CCL >60 cm, particularly vulnerable to the increasing quantity of floating plastic into their foraging sites highlighting the need of further research to associate debris ingestion with turtle diet and their size.

Phthalate esters (PAEs) concentration pattern reflects dietary habitats (δ13C) in blood of Mediterranean loggerhead turtles (Caretta caretta).

Phthalic acid esters (PAEs) are classified as endocrine disruptors, but it remains unclear if they can enter the marine food-web and result in severe health effects for organisms. Loggerhead turtles (Caretta caretta) can be chronically exposed to PAEs by ingesting plastic debris, but no information is available about PAEs levels in blood, and how these concentrations are related to diet during different life stages. This paper investigated, for the first time, six PAEs in blood of 18 wild-caught Mediterranean loggerhead turtles throughout solid-phase extraction coupled with gas chromatography-ion trap/mass spectrometry. Stable isotope analyses of carbon and nitrogen were also performed to assess the resource use pattern of loggerhead turtles. DEHP (12-63 ng mL-1) and DBP (6-57 ng mL-1) were the most frequently represented PAEs, followed by DiBP, DMP, DEP and DOP. The total PAEs concentration was highest in three turtles (124-260 ng mL-1) whereas three other turtles had concentrations below the detection limit. PAEs were clustered in three groups according to concentration in all samples: DEHP in the first group, DBP, DEP, and DiBP in the second group, and DOP and DMP in the third group. The total phthalates concentration did not differ between large-sized (96.3 ± 86.0 ng mL-1) and small-sized (67.1 ± 34.2 ng mL-1) turtles (p < 0.001). However, DMP and DEP were found only in large-sized turtles and DiBP and DBP had higher concentrations in large-sized turtles. On the other hand, DEHP and DOP were found in both small- and large-sized turtles with similar concentrations, i.e. ~ 21.0/32.0 ng mL-1 and ~ 7.1/9.9 ng mL-1, respectively. Winsored robust models indicated that δ13C is a good predictor for DBP and DiBP concentrations (significant Akaike Information criterion weight, AICwt). Our results indicate that blood is a good matrix to evaluate acute exposure to PAEs in marine turtles. Moreover, this approach is here suggested as a useful tool to explain the internal dose of PAEs in term of dietary habits (δ13C), suggesting that all marine species at high trophic levels may be particularly exposed to PAEs, despite their different dietary habitats and levels of exposure.

Transient Anomalous Diffusion MRI Measurement Discriminates Porous Polymeric Matrices Characterized by Different Sub-Microstructures and Fractal Dimension.

Considering the current development of new nanostructured and complex materials and gels, it is critical to develop a sub-micro-scale sensitivity tool to quantify experimentally new parameters describing sub-microstructured porous systems. Diffusion NMR, based on the measurement of endogenous water's diffusion displacement, offers unique information on the structural features of materials and tissues. In this paper, we applied anomalous diffusion NMR protocols to quantify the subdiffusion of water and to measure, in an alternative, non-destructive and non-invasive modality, the fractal dimension dw of systems characterized by micro and sub-micro geometrical structures. To this end, three highly heterogeneous porous-polymeric matrices were studied. All the three matrices composed of glycidylmethacrylate-divynilbenzene porous monoliths obtained through the High Internal Phase Emulsion technique were characterized by pores of approximately spherical symmetry, with diameters in the range of 2-10 µm. Pores were interconnected by a plurality of window holes present on pore walls, which were characterized by size coverings in the range of 0.5-2 µm. The walls were characterized by a different degree of surface roughness. Moreover, complementary techniques, namely Field Emission Scanning Electron Microscopy (FE-SEM) and dielectric spectroscopy, were used to corroborate the NMR results. The experimental results showed that the anomalous diffusion α parameter that quantifies subdiffusion and dw = 2/α changed in parallel to the specific surface area S (or the surface roughness) of the porous matrices, showing a submicroscopic sensitivity. The results reported here suggest that the anomalous diffusion NMR method tested may be a valid experimental tool to corroborate theoretical and simulation results developed and performed for describing highly heterogeneous and complex systems. On the other hand, non-invasive and non-destructive anomalous subdiffusion NMR may be a useful tool to study the characteristic features of new highly heterogeneous nanostructured and complex functional materials and gels useful in cultural heritage applications, as well as scaffolds useful in tissue engineering.

Label-free magnetic nanoparticles-based electrochemical immunosensor for atrazine detection.

This work presents the realization of a label-free electrochemical immunosensor for the quick, cheap, and straightforward determination of atrazine. This biodevice is based on developing a technological platform where a gold screen printed electrode (Au-SPE) surface was modified by the electrodeposition of a highly porous gold layer. As an internal probe redox, a Prussian Blue thin layer (PB) was then electrosynthetized onto the modified Au-SPE. Atrazine antibody (Ab-ATZ) was immobilized using G protein-functionalized magnetic nanoparticles (MNPs@protG) to ensure the correct orientation of the antibody to enhance the immunoaffinity. Under optimum experimental conditions, the electrochemical characterization of the developed immunosensor displays a linearity range towards atrazine within 0.05-1.5 ng/mL, a LOD of 0.011 ng/mL good reproducibility and stability. The immunosensor was tested in the analysis of spiked drinking water samples with a mean recovery ranging from 95.7 to 108.4%. The overall good analytical performances of this immunodevice suggest its application for the screening and monitoring of atrazine in real matrices.

Non-Invasive Assessment of PVA-Borax Hydrogel Effectiveness in Removing Metal Corrosion Products on Stones by Portable NMR.

The cleaning of buildings, statues, and artworks composed of stone materials from metal corrosion is an important topic in the cultural heritage field. In this work the cleaning effectiveness of a PVA-PEO-borax hydrogel in removing metal corrosion products from different porosity stones has been assessed by using a multidisciplinary and non-destructive approach based on relaxation times measurement by single-sided portable Nuclear Magnetic Resonance (NMR), Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), and Raman Spectroscopy. To this end, samples of two lithotypes, Travertine and Carrara marble, have been soiled by triggering acidic corrosion of some copper coins in contact with the stone surface. Then, a PVA-PEO-borax hydrogel was used to clean the stone surface. NMR data were collected in untreated, soiled with corrosion products, and hydrogel-cleaned samples. Raman spectroscopy was performed on PVA-PEO-borax hydrogel before and after cleaning of metal corrosion. Furthermore, the characterization of the dirty gel was obtained by SEM-EDS. The combination of NMR, SEM-EDS and Raman results suggests that the mechanism behind the hydrogel cleaning action is to trap heavy metal corrosion products, such as Cu2+ between adjacent boron ions cross-linked with PVA. Moreover, the PVA-PEO-borax hydrogel cleaning effectiveness depends on the stone porosity, being better in Carrara marble compared to Travertine.

Fast and Reliable Determination of Phthalic Acid Esters in the Blood of Marine Turtles by Means of Solid Phase Extraction Coupled with Gas Chromatography-Ion Trap/Mass Spectrometry.

The presence of phthalic acid esters (PAEs) in marine environments is an important issue. These chemicals are able to affect marine organisms, particularly marine turtles, and to act as endocrine disrupters. In this paper, for the first time, a simple and reproducible analytical method based on solid-phase extraction (SPE) coupled with gas chromatography-ion trap/mass spectrometry (GC-IT/MS) was developed for the extraction of phthalates from the blood of marine turtles. The extraction was obtained by using C18 phthalates-free as the stationary phase. In order to individuate the best working conditions for the extraction, the adsorption isotherms and breakthrough curves were studied. The overall analytical methodology was validated in terms of limit of detection (LOD, 0.08-0.6 ng mL-1), limit of quantification (LOQ, 0.4-0.8 ng mL-1), and correlation coefficients (>0.9933). By using this procedure, percentage recoveries ranging from 89 to 103% were achieved. The precision parameters (intra-day and inter-day) were studied, and the obtained values were smaller than 12.5%. These data confirm the goodness of the proposed analytical methodology, which is applied to real samples.

Single-Sided Portable NMR Investigation to Assess and Monitor Cleaning Action of PVA-Borax Hydrogel in Travertine and Lecce Stone.

In this work, we investigated the potential of PVA-borax hydrogel for cleaning limestones and the dependence of the cleaning on the porosity of the rock and on the action time of the hydrogel treatment. Towards this goal, we used a nuclear magnetic resonance (NMR) spectrometer, developed for non-invasive and non-destructive applications on cultural heritage. T2-NMR parameters were quantified on different samples of Lecce stone and Travertine cut perpendicular (Pe) and parallel (Pa) to the bedding planes under different experimental conditions: untreated samples, treated with Paraloid B72 and cleaned with PVA-PEO-borax hydrogel applied for 4 min and 2 h. The T2 results suggest that the effectiveness of the cleaning strongly depended on the porosity of the stones. In Lecce stone, the hydrogel seemed to eliminate both the paramagnetic impurities (in equal measure with 4 min and 2 h treatment) and Paraloid B72. In Travertine Pe, characterized by a smaller pore size compared to Lecce stone, no significant effects were found regarding both the cleaning and the treatment with Paraloid B72. In Travertine Pa, characterized by a larger pore size than the other two samples, the hydrogel seemed to clean the paramagnetic agents (it worked better if applied for a longer time) but it did not appear to have any effect on Paraloid B72 removal.

An ultra performance liquid chromatography coupled with high resolution mass spectrometry method for the screening of cianotoxins content in drinking water samples.

The incidence of cyanobacterial harmful algal blooms (CHABs) and their potentially toxic secondary metabolites is increasing in Italy and worldwide and several studies demonstrated that the climate change may be playing a role. The method described in this work allows to detect simultaneously 21 cyanotoxins of different classes (including 12 Microcystins, 5 Microginins, 2 Cyanopeptolins, and 2 Anabaenopeptins) in water samples for human consumption by an Ultra Performance Liquid Chromatography coupled with a Q-TOF mass spectrometer. Water samples were freezed, filtered, spiked with Nodularin used as internal standard (I.S.) and then extracted with a SPE Carboghaph 4 cartridge. The extracted sample were analysed injecting 10 µL into the UPLC-HRMS/MS system: the chromatographic separation was obtained using acetonitrile and water as mobile phases, both containing 10 mM formic acid, and a UPLC C18 column, acquiring the experiments in positive ionization and Sensitivity Mode. The described method allows to separate and detect all the selected analytes in short time of analysis (16 minutes) with a good resolution for all the analytes.•simultaneous determination of 21 cyanotoxins belonging to different classes in water sample•low injection volume•short time of analysis.

Site-Directed Antibody Immobilization by Resorc[4]arene-Based Immunosensors.

One of the main problems in the development of immunosensors is to overcome the complexity of binding antibodies to the sensor surface. Most immobilizing methods lead to a random orientation of antibodies with a lower binding site density and immunoaffinity. In order to control the orientation of antibody immobilization, several resorc[4]arene derivatives were designed and synthesized. After the spectroscopic characterization of resorc[4]arene self-assembled monolayers (SAMs) onto gold films, the surface coverage and the orientation of insulin antibody (Ab-Ins) were assessed by a surface plasmon resonance (SPR) technique and compared with a random immobilization method. Experimental results combined with theoretical studies confirmed the dipole-dipole interaction as an important factor in antibody orientation and demonstrated the importance of the upper rim functionalization of resorcarenes. Accordingly, resorcarene 5 showed a major binding force towards Ab-Ins thanks to the H-bond interactions with the amine protein groups. Based on these findings, the resorcarene-based immunosensor is a powerful system with improved sensitivity providing new insight into sensor development.

Multi-residue Ultra Performance Liquid Chromatography-High resolution mass spectrometric method for the analysis of 21 cyanotoxins in surface water for human consumption.

The presence of cyanobacteria and their toxins in water used as drinking water or for recreational purposes may represent a risk for human health. This work describes the development of an advanced analytical method for simultaneous determination of 21 cyanotoxins (including Microcystins, Cyanopeptolins, Anabaenopeptins and Microginins) in drinking water based on Ultra Performance Liquid Chromatography coupled with a Q-TOF mass spectrometer. Water samples, spiked with Nodularin as internal standard at 1 µg/L, were extracted using Carbograph 4 SPE cartridge and 10 µL of the extracted sample were injected into the UPLC-HRMS/MS system. Analytes separation was obtained using a UPLC C18 column, acetonitrile and water as mobile phases, both containing 10 mM formic acid, and operating in positive ionization mode and sensitivity mode. The method has been proven to be robust, precise and accurate with recovery percentages above 85% and with relative standard deviations ≤16% and LODs between 0.002 and 0.047 µg/L, fitting for the intended purposes at the concentrations of interest. This method was applied during a monitoring activity in an Italian volcanic lake in Viterbo (Lazio Region, Italy), due to a severe algal proliferation in January 2018-March 2019 period and for the assessment of cyanobacteria proliferation risk and of cyanotoxin production in drinking water chain.