RESUMO
La0.67LixTi1-xAlxO3 were synthesized using the sol-gel Pechini route. Ceramic samples were sintered in the temperature range of 1240-1300 °C in the air atmosphere. It was found that in the concentration range of 0.05 ≤ x < 0.15 there is a morphotropic phase boundary region with rhombohedral and tetragonal syngonies. In the concentration range of 0.15 ≤ x ≤ 0.3, a single-phase solid solution with rhombohedral R 3 â¾ c syngony is formed. As the value of x increases, the average grain size of La0.67LixTi1-xAlxO3 ceramics increases from 5.23 µm (x = 0.05) to 8.76 µm (x = 0.3). All materials of the La0.67LixTi1-xAlxO3 system at 0.05 ≤ x ≤ 0.3 have colossal values of dielectric constant ε' > 104 at frequencies up to 1 kHz. La0.67LixTi1-xAlxO3 (x = 0.2) solid solution with rhombohedral syngony has the highest value of dielectric constant and the lowest value of the dielectric losses.
RESUMO
This work is on the design, fabrication and characterization of a hexagonal ferrite band-pass filter that can be tuned either with a magnetic field or an electric field. The filter operation is based on a straight-edge Y-type hexagonal ferrite resonator symmetrically coupled to the input and output microstrip transmission lines. The Zn2Yfilter demonstrated magnetic field tunability in the 8-12 GHz frequency range by applying an in-plane bias magnetic field H0 provided by a built-in permanent magnet. The insertion loss and 3 dB bandwidth within this band were 8.6 ± 0.4 dB and 350 ± 40 MHz, respectively. The electric field E tunability of the pass-band of the device was facilitated by the nonlinear magnetoelectric effect (NLME) in the ferrite. The E-tuning of the center frequency of the filter by (1150 ± 90) MHz was obtained for an input DC electric power of 200 mW. With efforts directed at a significant reduction in the insertion loss, the compact and power efficient magnetic and electric field tunable Zn2Y band-pass filter has the potential for use in novel reconfigurable RF/microwave devices and communication systems.
