Self-assembly of Co/Pt stripes with current-induced domain wall motion towards 3D racetrack devices.

Modification of the magnetic properties under the induced strain and curvature is a promising avenue to build three-dimensional magnetic devices, based on the domain wall motion. So far, most of the studies with 3D magnetic structures were performed in the helixes and nanowires, mainly with stationary domain walls. In this study, we demonstrate the impact of 3D geometry, strain and curvature on the current-induced domain wall motion and spin-orbital torque efficiency in the heterostructure, realized via a self-assembly rolling technique on a polymeric platform. We introduce a complete 3D memory unit with write, read and store functionality, all based on the field-free domain wall motion. Additionally, we conducted a comparative analysis between 2D and 3D structures, particularly addressing the influence of heat during the electric current pulse sequences. Finally, we demonstrated a remarkable increase of 30% in spin-torque efficiency in 3D configuration.

Study of synthesis temperature effect onß-NaGdF4: Yb3+, Er3+ upconversion luminescence efficiency and decay time using maximum entropy method.

Upconversion materials have several advantages for many applications due to their great potential in converting infrared light to visible. For practical use, it is necessary to achieve high intensity of UC luminescence, so the studies of the optimal synthesis parameters for upconversion nanoparticles are still going on. In the present work, we analyzed the synthesis temperature effect on the efficiency and luminescence decay ofß-NaGd0.78Yb0.20Er0.02F4(15-25 nm) upconversion nanoparticles with hexagonal crystal structure synthesized by anhydrous solvothermal technique. The synthesis temperature was varied in the 290 °C-320 °C range. The synthesis temperature was shown to have a significant influence on the upconversion luminescence efficiency and decay time. The coherent scattering domain linearly depended on the synthesis temperature and was in the range 13.1-22.3 nm, while the efficiency of the upconversion luminescence increases exponentially from 0.02 to 0.10% under 1 W cm-2excitation. For a fundamental analysis of the reasons for the upconversion luminescence intensity dependence on the synthesis temperature, it was proposed to use the maximum entropy method for luminescence decay kinetics processing. This method does not require a preliminary setting of the number of exponents and, due to this, makes it possible to estimate additional components in the luminescence decay kinetics, which are attributed to different populations of rare-earth ions in different conditions. Two components in the green luminescence and one component in the red luminescence decay kinetics were revealed for nanoparticles prepared at 290 °C-300 °C. An intense short and a weak long component in green luminescence decay kinetics could be associated with two different populations of ions in the surface quenching layer and the crystal core volume. With an increase in the synthesis temperature, the second component disappears, and the decay time increases due to an increase in the number of ions in the crystal core volume and a more uniform distribution of dopants.

Hydrophobic up-conversion carboxylated nanocellulose/fluoride phosphor composite films modified with alkyl ketene dimer.

Hydrophobic up-conversion nanocomposite films have been developed based on TEMPO-oxidized cellulose nanofibrils (TOCNF) modified with alkyl ketene dimer (AKD) as a matrix and MF2:Ho (M = Ca, Sr) as a phosphor. Fabrication of homogeneous, strong and translucent TOCNF/MF2:Ho-AKD films with water contact angle of 123 ±â€¯2° was accomplished with mild drying at 110 °C. These hydrophobic nanocomposite films demonstrated stable up-conversion luminescence in the visible spectral range upon excitation of the 5I7 level of Ho3+ ions by laser irradiation at 1912 nm both under ambient conditions and in a humid atmosphere (92 ±â€¯2% humidity). The absence of luminescence quenching in a high humidity atmosphere for TOCNF/MF2:Ho-AKD composite films was considered to be due to the reliable shielding effect of the hydrophobic TOCNF-AKD matrix. The films show promise for visualizing 2 µm laser radiation in medicine and monitoring of the atmosphere.

Temperature Sensing in the Short-Wave Infrared Spectral Region Using Core-Shell NaGdF4:Yb3+, Ho3+, Er3+@NaYF4 Nanothermometers.

The short-wave infrared region (SWIR) is promising for deep-tissue visualization and temperature sensing due to higher penetration depth and reduced scattering of radiation. However, the strong quenching of luminescence in biological media and low thermal sensitivity of nanothermometers in this region are major drawbacks that limit their practical application. Nanoparticles doped with rare-earth ions are widely used as thermal sensors operating in the SWIR region through the luminescence intensity ratio (LIR) approach. In this study, the effect of the shell on the sensitivity of temperature determination using NaGdF4 nanoparticles doped with rare-earth ions (REI) Yb3+, Ho3+, and Er3+ coated with an inert NaYF4 shell was investigated. We found that coating the nanoparticles with a shell significantly increases the intensity of luminescence in the SWIR range, prevents water from quenching luminescence, and decreases the temperature of laser-induced heating. Thermometry in the SWIR spectral region was demonstrated using synthesized nanoparticles in dry powder and in water. The core-shell nanoparticles obtained had intense luminescence and made it possible to determine temperatures in the range of 20-40 °C. The relative thermal sensitivity of core-shell NPs was 0.68% °C-1 in water and 4.2% °C-1 in dry powder.

Indium iodide single crystal: breakthrough material for infrared acousto-optics.

Measurements of the refractive indices and the full set of longitudinal acousto-optical figures of merit in an orthorhombic single-crystal indium iodide (InI) were carried out. The high acousto-optic characteristics (M2 up to 1100×10-15s3kg-1) and strong optical anisotropy (Δn=0.47) make it possible to design various types of high-performance acousto-optic devices of the middle and far-infrared spectral range. In combination with a wide transparency range (0.62-51µm), the obtained characteristics make the crystal extremely promising in comparison with most existing analogs.

Is Geometric Frustration-Induced Disorder a Recipe for High Ionic Conductivity?

Ionic conductivity is ubiquitous to many industrially important applications such as fuel cells, batteries, sensors, and catalysis. Tunable conductivity in these systems is therefore key to their commercial viability. Here, we show that geometric frustration can be exploited as a vehicle for conductivity tuning. In particular, we imposed geometric frustration upon a prototypical system, CaF2, by ball milling it with BaF2, to create nanostructured Ba1-xCaxF2 solid solutions and increased its ionic conductivity by over 5 orders of magnitude. By mirroring each experiment with MD simulation, including "simulating synthesis", we reveal that geometric frustration confers, on a system at ambient temperature, structural and dynamical attributes that are typically associated with heating a material above its superionic transition temperature. These include structural disorder, excess volume, pseudovacancy arrays, and collective transport mechanisms; we show that the excess volume correlates with ionic conductivity for the Ba1-xCaxF2 system. We also present evidence that geometric frustration-induced conductivity is a general phenomenon, which may help explain the high ionic conductivity in doped fluorite-structured oxides such as ceria and zirconia, with application for solid oxide fuel cells. A review on geometric frustration [ Nature 2015 , 521 , 303 ] remarks that classical crystallography is inadequate to describe systems with correlated disorder, but that correlated disorder has clear crystallographic signatures. Here, we identify two possible crystallographic signatures of geometric frustration: excess volume and correlated "snake-like" ionic transport; the latter infers correlated disorder. In particular, as one ion in the chain moves, all the other (correlated) ions in the chain move simultaneously. Critically, our simulations reveal snake-like chains, over 40 Å in length, which indicates long-range correlation in our disordered systems. Similarly, collective transport in glassy materials is well documented [for example, J. Chem. Phys. 2013 , 138 , 12A538 ]. Possible crystallographic nomenclatures, to be used to describe long-range order in disordered systems, may include, for example, the shape, length, and branching of the "snake" arrays. Such characterizations may ultimately provide insight and differences between long-range order in disordered, amorphous, or liquid states and processes such as ionic conductivity, melting, and crystallization.

Upconversion microparticles as time-resolved luminescent probes for multiphoton microscopy: desired signal extraction from the streaking effect.

The great interest in upconversion nanoparticles exists due to their high efficiency under multiphoton excitation. However, when these particles are used in scanning microscopy, the upconversion luminescence causes a streaking effect due to the long lifetime. This article describes a method of upconversion microparticle luminescence lifetime determination with help of modified Lucy­Richardson deconvolution of laser scanning microscope (LSM) image obtained under near-IR excitation using nondescanned detectors. Determination of the upconversion luminescence intensity and the decay time of separate microparticles was done by intensity profile along the image fast scan axis approximation. We studied upconversion submicroparticles based on fluoride hosts doped with Yb3+-Er3+ and Yb3+-Tm3+ rare earth ion pairs, and the characteristic decay times were 0.1 to 1.5 ms. We also compared the results of LSM measurements with the photon counting method results; the spread of values was about 13% and was associated with the approximation error. Data obtained from live cells showed the possibility of distinguishing the position of upconversion submicroparticles inside and outside the cells by the difference of their lifetime. The proposed technique allows using the upconversion microparticles without shells as probes for the presence of OH? ions and CO2 molecules.

Fast and reliable method of conductive carbon nanotube-probe fabrication for scanning probe microscopy.

We demonstrate the procedure of scanning probe microscopy (SPM) conductive probe fabrication with a single multi-walled carbon nanotube (MWNT) on a silicon cantilever pyramid. The nanotube bundle reliably attached to the metal-covered pyramid is formed using dielectrophoresis technique from the MWNT suspension. It is shown that the dimpled aluminum sample can be used both for shortening/modification of the nanotube bundle by applying pulse voltage between the probe and the sample and for controlling the probe shape via atomic force microscopy imaging the sample. Carbon nanotube attached to cantilever covered with noble metal is suitable for SPM imaging in such modulation regimes as capacitance contrast microscopy, Kelvin probe microscopy, and scanning gate microscopy. The majority of such probes are conductive with conductivity not degrading within hours of SPM imaging.

Diode-pumped Er:CaF2 ceramic 2.7 µm tunable laser.

Spectroscopic and laser properties of a newly developed high optical quality Er:CaF2 hot-formed ceramic were investigated. Under pulsed 968 nm laser diode pumping, the mid-infrared (2.7 µm) radiation was obtained with a slope efficiency of 3%. Laser tunability was reached using a birefringent filter and the laser tuning range of 118 nm, from 2687 up to 2805 nm, was demonstrated. The maximal output energy reached was 0.48 mJ at 2730 nm for the absorbed pumping energy 34 mJ.

Novel benzanthrone aminoderivatives for membrane studies.

The potential of novel benzanthrone aminoderivatives to trace the changes in physicochemical properties of lipid bilayer has been evaluated. Binding of the dyes to the lipid bilayers composed of zwitterionic phospholipid phosphatidylcholine (PC) and its mixtures with anionic phospholipid cardiolipin (CL) and cholesterol (Chol) was followed by significant quantum yield increase with small blue shift of emission maximum. Analysis of partition coefficients of the dyes under study showed that all aminobenzanthrones possess high lipid-associating ability. The dyes A8 and AM2 proved to be sensitive to the variations in membrane chemical composition responding to the changes in bilayer hydration induced by CL and Chol.