RESUMO
Ethylene dimerization is an industrial process that is currently carried out using homogeneous catalysts. Here we present a highly active heterogeneous catalyst containing minute amounts of atomically dispersed Pd. It requires no co-catalyst(s) or activator(s) and significantly outperforms previously reported catalysts tested under similar reaction conditions. The selectivity to C4- and C6-hydrocarbons was about 80 % and 10 % at 42 % ethylene conversion at 200 °C using an industrially relevant feed containing 50â vol % ethylene, respectively. Our kinetic and catalyst characterization experiments complemented by density functional theory calculations provide molecular insights into the local environment of isolated Pd(II)Ox species and their role in achieving high activity in the target reaction. When the developed catalyst was rationally integrated with a Mo-containing olefin metathesis catalyst in the same reactor, the formed butenes reacted with ethylene to propylene with a selectivity of 98 % at about 24 % ethylene conversion.
RESUMO
A mixed oxide of silver and nickel AgNiO2 was obtained via co-precipitation in alkaline medium. This oxide demonstrates room temperature activity in the reaction of ethylene epoxidation with a high selectivity (up to 70%). Using the PDF method, it was found that the initial structure of AgNiO2 contains stacking faults and silver vacancies, which cause the nonstoichiometry of the oxide (Ag/Ni < 1). It has been established that on the initial surface of AgNiO2 oxide, silver state can be considered as an intermediate between Ag2O and Ag0 (i.e. Agδ+-like), while nickel is characterized by signs of a deeply oxidized state (Ni3+-like). The interaction of AgNiO2 with C2H4 at room temperature leads to the simultaneous removal of two oxygen species with Eb(O 1s) = 529.0 eV and 530.5 eV considered as nucleophilic and electrophilic oxygen states, respectively. Nucleophilic oxygen was attributed to the lattice oxygen (Ag-O-Ni), while the electrophilic species with epoxidation activity was associated with the weakly bound oxygen stabilized on the surface. According to the TPR-C2H4 data, a large number of weakly bound oxygen species were found on the pristine AgNiO2 surface. The removal of such species at room temperature didn't result in noticeable structural transformation of delafossite. As the temperature of ethylene oxidation over AgNiO2 increased, the appearance of Ag0 particles was first observed below 200 °C followed by the complete destruction of the delafossite structure at higher temperatures.
RESUMO
The local structure of the active sites is one of the key aspects of establishing the nature of the catalytic activity of the systems. In this work, a detailed structural investigation of the Rh-CeO2 catalysts prepared by the co-precipitation method was carried out. The application of a variety of physicochemical methods such as XRD, Raman spectroscopy, XPS, TEM, TPR-H2, and XAS revealed the presence of highly dispersed Rh3+ species in the catalysts: Rh3+ single ions and RhOx clusters. The substitution of Ce4+ ions by Rh3+ species, which provided a strong distortion of the CeO2 lattice, is shown. XAS data ensured the refinement of the Rh local structure. It was shown that single Rh3+ sites located next to each other can merge the formation of RhOx clusters with Rh local environment close to the one in Rh2O3 and CeRh2O5 oxides. The distortion of the CeO2 lattice around single and cluster rhodium species had a beneficial effect on the catalytic activity of the samples in low-temperature CO oxidation (LTO-CO). TEM, XAS, and in situ XRD data allowed establishing the structural transformations of the catalysts under Red-Ox treatments. The reduction treatment led to Rhn metallic cluster formation localized on defects of the reduced CeO2-δ. The reduced sample demonstrated efficient CO conversion at 0 °C. However, this system was not stable: its contact with air led to ceria reoxidation and partial reoxidation of Rh to highly dispersed Rh3+ species at room temperature, while heating in an oxidizing atmosphere resulted in the complete reoxidation of metallic rhodium species. The results of the work shed light on the structural aspects of the reversibility of the Rh-CeO2 catalysts based on the highly dispersed Rh3+ species under treatment in the reaction conditions.
RESUMO
Metal-organic frameworks (MOFs) possess unique flexibility of structure and properties, which drives them toward applications as water adsorbents in many emerging technologies, such as adsorptive heat transformation, water harvesting from the air, dehumidification, and desalination. A deep understanding of the surface phenomena is a prerequisite for the target-oriented design of MOFs with the required adsorption properties. In this work, we comprehensively study the effect of functional groups on water adsorption on a series CAU-10-X substituted with both hydrophilic (X = NH2) and hydrophobic (X = NO2) groups in the linker. The adsorption equilibrium is measured at P = 7.6-42 mbar and T = 5-100 °C. The study of water adsorption by a set of mutually complementary physicochemical methods (TG, XRD in situ, FTIR, and 1H NMR relaxometry) elucidates the nature of primary adsorption sites and water adsorption mechanisms.
RESUMO
In this work, the reaction properties of mixed silver-nickel oxide AgNiO2 were investigated in the reaction of CO oxidation ranging from room temperature up to 350 °C. X-ray photoelectron spectroscopy revealed the presence of a single oxidized silver state and the combination of Ni2+ and Ni3+ species on the surface of the as-prepared mixed oxide. It was established that AgNiO2 was able to interact with CO at room temperature. It was accompanied by the simultaneous titration of the lattice (O2--like) and weakly charged (O--like) oxygen species. The interaction with CO below 100 °C resulted in the accumulation of carbonate-like species on the AgNiO2 surface. Above 150 °C, the surface structure of mixed oxide was found to be disrupted, resulting in the formation of individual particles of metallic silver and oxidized nickel.
RESUMO
We report the crystal structure and crystallization conditions of a first hydrated form of metacetamol (a hemihydrate), C8H9NO2·0.5H2O. It crystallizes from metacetamol-saturated 1:1 (v/v) water-ethanol solutions in a monoclinic structure (space group P21/n) and contains eight metacetamol and four water molecules per unit cell. The conformations of the molecules are the same as in polymorph II of metacetamol, which ensures the formation of hydrogen-bonded dimers and R22(16) ring motifs in its crystal structure similar to those in polymorph II. Unlike in form II, however, these dimers in the hemihydrate are connected through water molecules into infinite hydrogen-bonded molecular chains. Different chains are linked to each other by metacetamol-water and metacetamol-metacetamol hydrogen bonds, the latter type being also present in polymorph I. The overall noncovalent network of the hemihydrate is well developed and several types of hydrogen bonds are responsible for its formation.