Direct Synthesis of Aluminosilicate SSZ-39 Zeolite Using Colloidal Silica as a Starting Source.

For the first time, SSZ-39 zeolite has been directly prepared using conventional colloidal silica and sodium aluminate instead of using FAU zeolite as the raw material in the alkaline media. The adjustment of the Si/Al ratios in the starting materials to the suitable values is a key factor to prepare the aluminosilicate SSZ-39 zeolite. Various characterizations (for instance, X-ray diffraction, scanning electron microscopy, nitrogen sorption, solid 27Al NMR, and NH3-temperature-programmed desorption) display that the aluminosilicate SSZ-39 zeolite owns high crystallinity, uniform cuboid morphology, large surface area, four-coordinated aluminum species, and strong acidic sites. Inductively coupled plasma analysis shows that the SiO2/Al2O3 ratios of the SSZ-39 products are ranged from 12.8 to 16.8. Considering the special framework of the SSZ-39 zeolite, the yield of this synthesis is not higher than 21.3%. Moreover, the catalytic performance of Cu-SSZ-39 catalyst synthesized from this route is excellent in the selective catalytic reduction of NO x with NH3 (NH3-SCR).

Influence of supports on catalytic behavior of nickel catalysts in carbon dioxide reforming of toluene as a model compound of tar from biomass gasification.

A series of supported Ni catalysts including Ni/MgO, Ni/γ-Al2O3, Ni/α-Al2O3, Ni/SiO2 and Ni/ZrO2 was tested in CO2 reforming of toluene as a model compound of tar from biomass gasification in a fluidized bed reactor, and characterized by the means of temperature programmed reduction with hydrogen (H2-TPR), XRD, TEM and temperature programmed oxidation (TPO). Combining the characterization results with the performance tests, the activity of catalyst greatly depended on Ni particles size, and the stability was affected by the coke composition. Both of them (Ni particle size and coke composition) were closely related to the interaction between nickel and support which would determine the chemical environment where Ni inhabited. The best catalytic performance was observed on Ni/MgO due to the strong interaction between NiO and MgO via the formation of Ni-Mg-O solid solution, and the highest dispersion of Ni particle in the basic environment.