Biochemical monitoring throughout all stages of rabies virus-like particles production by Raman spectroscopy using global models.

This work aimed to quantify growth and biochemical parameters (viable cell density, Xv; cell viability, CV; glucose, lactate, glutamine, glutamate, ammonium, and potassium concentrations) in upstream stages to obtain rabies virus-like particles (rabies VLP) from insect cell-baculovirus system using on-line and off-line Raman spectra to calibrate global models with minimal experimental data. Five cultivations in bioreactor were performed. The first one comprised the growth of uninfected Spodoptera frugiperda (Sf9) cells, the second and third runs to obtain recombinant baculovirus (rBV) bearing Rabies G glycoprotein and matrix protein, respectively. The fourth one involved the generation of rabies VLP from rBVs and the last one was a repetition of the third one with cell inoculum infected by rBV. The spectra were acquired through a Raman spectrometer with a 785-nm laser source. The fitted Partial Least Square models for nutrients and metabolites were comparable with those previously reported for mammalian cell lines (Relative error < 15 %). However, the use of this chemometrics approach for Xv and CV was not as accurate as it was for other parameters. The findings from this work established the basis for bioprocess Raman spectroscopical monitoring using insect cells for VLP manufacturing, which are gaining ground in the pharmaceutical industry.

Performance Comparison of Recombinant Baculovirus and Rabies Virus-like Particles production Using Two Culture Platforms.

This work aimed to assess, following upstream optimization in Schott flasks, the scalability from this culture platform to a stirred-tank bioreactor in order to yield rabies-recombinant baculovirus, bearing genes of G (BVG) and M (BVM) proteins, and to obtain rabies virus-like particles (VLP) from them, using Sf9 insect cells as a host. Equivalent assays in Schott flasks and a bioreactor were performed to compare both systems and a multivariate statistical approach was also carried out to maximize VLP production as a function of BVG and BVM's multiplicity of infection (MOI) and harvest time (HT). Viable cell density, cell viability, virus titer, BVG and BVM quantification by dot-blot, and BVG quantification by Enzyme-Linked Immunosorbent Assay (ELISA) were monitored throughout the assays. Furthermore, transmission electron microscopy was used to characterize rabies VLP. The optimal combination for maximum VLP expression was BVG and BVM MOI of 2.3 pfu/cell and 5.1 pfu/cell, respectively, and 108 h of harvest time. The current study confirmed that the utilization of Schott flasks and a benchtop bioreactor under the conditions applied herein are equivalent regarding the cell death kinetics corresponding to the recombinant baculovirus infection process in Sf9 cells. According to the results, the hydrodynamic and chemical differences in both systems seem to greatly affect the virus and VLP integrity after release.

Ethanol from rice byproduct using amylases secreted by Rhizopus microsporus var. oligosporus. Enzyme partial purification and characterization.

A three-stage bioethanol bioprocess was developed. Firstly, amylases were obtained from Rhizopus microsporus var. oligosporus using wheat bran in solid-state fermentation. Secondly, amylases hydrolyzed a rice byproduct to make a glucose-rich solution, and this sugar was finally metabolized by Saccharomyces cerevisiae to produce bioethanol. Besides, the secreted enzymes were also partially purified and characterized. The amylase activity (AA) in the crude extract was 358 U/g substrate, and the partially purified enzyme showed the best activity in the 4.0-5.5 pH range. A wide pH stability range (3.5-8.5) was confirmed. The amylase was thermostable up to 60 °C. The ion Mn+2 (10 mM) improved by 60% the AA. There was a 54.9% yield in the conversion of rice residues into reducing sugars in 10 h. The glucose-rich solution was undergone fermentation by S. cerevisiae and showed high ethanol efficiency, 95.8% of the theoretical value. These results suggested a promising technology for bioethanol production.

An optimization study for expression of the rabies virus glycoprotein (RVGP) in mammalian cell lines using the Semliki Forest virus (SFV).

The Semliki Forest virus (SFV) viral vector has been widely used for transient protein expression. This study aimed to analyze comprehensively the capacity of SFV vector to express rabies lyssavirus glycoprotein (RVGP) in mammalian cells. The assessed parameters were transfection strategy, multiplicity of infection (MOI), harvest time and mammalian cell host. Two transfection approaches, electroporation and lipofection were evaluated to obtain the recombinant SFV, and the electroporation was found to be the most effective. Viral quantification by RT-qPCR was performed to elucidate the relation between the amount of recombinant virus utilized in the infection process and the production levels of the heterologous protein. Four different multiplicities of infection (MOIs = 1; 10; 15; 50) were evaluated using five mammalian cell lines: BHK-21, HuH-7, Vero, L929, and HEK-293T. Protein expression was assessed at two harvest times after infection (24 and 48 h). The recombinant protein generated was characterized by western blot, dot blot, and indirect immunofluorescence (IIF), while its concentration was determined by enzyme-linked immunosorbent assay (ELISA). Similar expression patterns were observed in cell lines BHK-21, HEK-293T, L929, and Vero, with higher RVGP production in the first 24 h. The BHK-21 cells showed yields of up to 4.3 µg per 106 cells when lower MOIs (1 and 10) were used. The HEK-293 T cells also showed similar production (4.3 µg per 106 cells) with MOI of 1, while the L929 and Vero cell lines showed lower expression rates of 2.82 and 1.26 µg per 106 cells, respectively. These cell lines showed lower expression levels at 48 h after infection compared to 24 h. Controversially, in the case of the HuH-7 cell line, RVGP production was higher at 48 h after infection (4.0 µg per 106 cells) and using MOIs of 15 and 50. This work may contribute to optimize the RVGP production using SFV system in mammalian cells. This study can also substantiate for example, the development of approaches that use of SFV for applications for other protein expressions and suggests values for relevant parameters and cell lines of this biotechnique.

Holistic protocol for callus culture optimization using statistical modelling.

Plants endue a key role against illnesses caused by oxidative stress. These attributes are frequently associated with polyphenolic compounds. However, presence and concentration of secondary metabolites are affected by abiotic factors. The in vitro culture techniques can solve these drawbacks. Peppers can be a suitable alternative to obtain polyphenols. Aiming to optimise the callus culture stage from Capsicum baccatum to produce polyphenols, this work evaluated systemically the effects of the explant's origin (root, hypocotyl and cotyledon), growth hormone type (2,4-dichlorophenoxyacetic acid (2,4-D), benzylaminopurine (BAP) and a combination of 2,4-D/BAP at five-to-one ratio) and concentration (0.023-10.000 mg L-1) on callus culture efficiency parameters using a multilevel factorial design. The root explant in combination with BAP at 1.138 mg L-1 ensured the optimal values of the assessed responses; ​callus mass (225.03 mg), antioxidant activity (35.95%), total phenols (11.48 mg of GAE/g DE) and flavonoids (15.92 mg of RU/g DE) production.

Model comparison to describe BHK-21 cell growth and metabolism in stirred tank bioreactors operated in batch mode

Baby Hamster Kidney cells (BHK-21) are commonly used in research and the biopharmaceutical industry. This work aimed to model the kinetic performance in batch operation mode of BHK-21 cells cultured in two stirred tank configurations using different dissolved oxygen concentrations and pH control strategies. Viable and dead cell concentrations, as well as glucose, glutamine, lactate and ammonium concentrations, were monitored. Statistical multiple linear regression, logistic equation and multiplicative Monod kinetic models were fitted. Statistical models for viable cells concentration as a function of nutrient and metabolite concentrations were significant (R2 >0.91). Logistic model parameters: intrinsic growth rate, cell density level in the medium and time for reaching maximum cell concentrations were within 0.061-0.083 h-1, 1.85-5.39 x 109 cell L-1 and 52-90 h ranges, respectively. A Monod-type model was satisfactorily fitted to the experimental data. Relative errors were lower than 10% for six monitored state variables in most of the assessed experimental conditions. The three models developed in this work can be used in bioprocesses involving BHK-21 with good fitting.

Model comparison to describe BHK-21 cell growth and metabolism in stirred tank bioreactors operated in batch mode

Baby Hamster Kidney cells (BHK-21) are commonly used in research and the biopharmaceutical industry. This work aimed to model the kinetic performance in batch operation mode of BHK-21 cells cultured in two stirred tank configurations using different dissolved oxygen concentrations and pH control strategies. Viable and dead cell concentrations, as well as glucose, glutamine, lactate and ammonium concentrations, were monitored. Statistical multiple linear regression, logistic equation and multiplicative Monod kinetic models were fitted. Statistical models for viable cells concentration as a function of nutrient and metabolite concentrations were significant (R2 >0.91). Logistic model parameters: intrinsic growth rate, cell density level in the medium and time for reaching maximum cell concentrations were within 0.061-0.083 h-1, 1.85-5.39 x 109 cell L-1 and 52-90 h ranges, respectively. A Monod-type model was satisfactorily fitted to the experimental data. Relative errors were lower than 10% for six monitored state variables in most of the assessed experimental conditions. The three models developed in this work can be used in bioprocesses involving BHK-21 with good fitting.

Lactic acid production from submerged fermentation of broken rice using undefined mixed culture.

The present work aimed to characterize and optimize the submerged fermentation of broken rice for lactic acid (LA) production using undefined mixed culture from dewatered activated sludge. A microorganism with amylolytic activity, which also produces LA, Lactobacillus amylovorus, was used as a control to assess the extent of mixed culture on LA yield. Three level full factorial designs were performed to optimize and define the influence of fermentation temperature (20-50 °C), gelatinization time (30-60 min) and broken rice concentration in culture medium (40-80 g L-1) on LA production in pure and undefined mixed culture. LA production in mixed culture (9.76 g L-1) increased in sixfold respect to pure culture in optimal assessed experimental conditions. The optimal conditions for maximizing LA yield in mixed culture bioprocess were 31 °C temperature, 45 min gelatinization time and 79 g L-1 broken rice concentration in culture medium. This study demonstrated the positive effect of undefined mixed culture from dewatered activated sludge to produce LA from culture medium formulated with broken rice. In addition, this work establishes the basis for an efficient and low-cost bioprocess to manufacture LA from this booming agro-industrial by-product.

Approach toward an efficient inoculum preparation stage for suspension BHK-21 cell culture.

Mammalian cells are the most frequently used hosts for biopharmaceutical proteins manufacturing. Inoculum quality is a key element for establishing an efficient bioconversion process. The main objective in inoculation expansion process is to generate large volume of viable cells in the shortest time. The aim of this paper was to optimize the inoculum preparation stage of baby hamster kidney (BHK)-21 cells for suspension cultures in benchtop bioreactors, by means of a combination of static and agitated culture systems. Critical parameters for static (liquid column height: 5, 10, 15 mm) and agitated (working volume: 35, 50, 65 mL, inoculum volume percentage: 10, 30 % and agitation speed: 25, 60 rpm) cultures were study in T-flask and spinner flask, respectively. The optimal liquid column height was 5 mm for static culture. The maximum viable cell concentration in spinner flask cultures was reached with 50 mL working volume and the inoculum volume percentage was not significant in the range under study (10-30 %) at 25 rpm agitation. Agitation speed at 60 rpm did not change the main kinetic parameters with respect to those observed for 25 rpm. These results allowed for a schedule to produce more than 4 × 10(9) BHK-21 cells from 4 × 10(6) cells in 13 day with 1,051 mL culture medium.

Transient expression of rabies virus G-glycoprotein using BHK-21 cells cultured in suspension.

OBJECTIVE: To assess the expression of rabies virus G-glycoprotein (RVGP) expression using Semliki Forest virus as a vector in combination with BHK-21 cells cultured in suspension. RESULTS: A multilevel factorial design was used to quantify effects of temperature (33-37 °C), fresh medium addition after the viral adsorption step (100-200 % with respect to the initial cell suspension volume before infection) and harvest time (8-40 h) on RVGP production. Experimental runs were performed in 24-well cell culture plates at a multiplicity of infection (MOI) of 16. An additional experiment in spinner-flask was performed at MOI of 9, using the optimal conditions determined in cell culture plates. Values for temperature, fresh medium addition and harvest time of 33 °C, 100 % and 16 h, respectively, ensured the optimal RVGP production in culture plates. The volumetric yield (239 ng ml(-1)) in these conditions was higher than that reported previously for adherent cell culture. In spinner-flasks, the volumetric yield was improved (559 ng ml(-1)). CONCLUSION: These results establish the basis for designing bioprocess to produce RVGP.

Artificial neural network associated to UV/Vis spectroscopy for monitoring bioreactions in biopharmaceutical processes.

Currently, mammalian cells are the most utilized hosts for biopharmaceutical production. The culture media for these cell lines include commonly in their composition a pH indicator. Spectroscopic techniques are used for biopharmaceutical process monitoring, among them, UV-Vis spectroscopy has found scarce applications. This work aimed to define artificial neural networks architecture and fit its parameters to predict some nutrients and metabolites, as well as viable cell concentration based on UV-Vis spectral data of mammalian cell bioprocess using phenol red in culture medium. The BHK-21 cell line was used as a mammalian cell model. Off-line spectra of supernatant samples taken from batches performed at different dissolved oxygen concentrations in two bioreactor configurations and with two pH control strategies were used to define two artificial neural networks. According to absolute errors, glutamine (0.13 ± 0.14 mM), glutamate (0.02 ± 0.02 mM), glucose (1.11 ± 1.70 mM), lactate (0.84 ± 0.68 mM) and viable cell concentrations (1.89 10(5) ± 1.90 10(5) cell/mL) were suitably predicted. The prediction error averages for monitored variables were lower than those previously reported using different spectroscopic techniques in combination with partial least squares or artificial neural network. The present work allows for UV-VIS sensor development, and decreases cost related to nutrients and metabolite quantifications.

Use of uniform designs in combination with neural networks for viral infection process development.

This work aimed to compare the predictive capacity of empirical models, based on the uniform design utilization combined to artificial neural networks with respect to classical factorial designs in bioprocess, using as example the rabies virus replication in BHK-21 cells. The viral infection process parameters under study were temperature (34°C, 37°C), multiplicity of infection (0.04, 0.07, 0.1), times of infection, and harvest (24, 48, 72 hours) and the monitored output parameter was viral production. A multilevel factorial experimental design was performed for the study of this system. Fractions of this experimental approach (18, 24, 30, 36 and 42 runs), defined according uniform designs, were used as alternative for modelling through artificial neural network and thereafter an output variable optimization was carried out by means of genetic algorithm methodology. Model prediction capacities for all uniform design approaches under study were better than that found for classical factorial design approach. It was demonstrated that uniform design in combination with artificial neural network could be an efficient experimental approach for modelling complex bioprocess like viral production. For the present study case, 67% of experimental resources were saved when compared to a classical factorial design approach. In the near future, this strategy could replace the established factorial designs used in the bioprocess development activities performed within biopharmaceutical organizations because of the improvements gained in the economics of experimentation that do not sacrifice the quality of decisions.

A multivariate calibration procedure for UV/VIS spectrometric monitoring of BHK-21 cell metabolism and growth.

Monitoring mammalian cell culture with UV­vis spectroscopy has not been widely explored. The aim of this work was to calibrate Partial Least Squares (PLS) models from off-line UV­vis spectral data in order to predict some nutrients and metabolites, as well as viable cell concentrations for mammalian cell bioprocess using phenol red in culture medium. The BHK-21 cell line was used as a mammalian cell model. Spectra of samples taken from batches performed at different dissolved oxygen concentrations (10, 30, 50, and 70% air saturation), in two bioreactor configurations and with two strategies to control pH were used to calibrate and validate PLS models. Glutamine, glutamate, glucose, and lactate concentrations were suitably predicted by means of this strategy. Especially for glutamine and glucose concentrations, the prediction error averages were lower than 0.5060.10 mM and 2.2160.16 mM, respectively. These values are comparable with those previously reported using near infrared and Raman spectroscopy in conjunction with PLS. However, viable cell concentration models need to be improved. The present work allows for UV­vis at-line sensor development, decrease cost related to nutrients and metabolite quantifications and establishment of fed-batch feeding schemes.