Determination of optimal experimental conditions for accurate 3D reconstruction of the magnetization vector via XMCD-PEEM.

This work presents a detailed analysis of the performance of X-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of magnetization. For this, 360° domain wall ring structures which form in a synthetic antiferromagnet are chosen as the model to conduct the quantitative analysis. An assessment is made of how the quality of the results is affected depending on the number of projections that are involved in the reconstruction process, as well as their angular distribution. For this a self-consistent error metric is developed which allows an estimation of the optimum azimuthal rotation angular range and number of projections. This work thus proposes XMCD-PEEM as a powerful tool for vector imaging of complex 3D magnetic structures.

Controlled evolution of three-dimensional magnetic states in strongly coupled cylindrical nanowire pairs.

Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence, we observe the formation of six fundamental states as a function of both inter-wire separation and wire height. In particular, two complex three-dimensional magnetic states, a 3D Landau Pattern and a Helical domain wall, are observed to emerge for intermediate overlap. These two emergent states show complex spin configurations, including a modulated domain wall with both Néel and Bloch character. The competition of magnetic interactions and the parallel growth scheme we follow (growing both wires at the same time) favours the formation of these anti-parallel metastable states. This works shows how the engineering of strongly coupled 3D nanostructures with competing interactions can be used to create complex spin textures.

A magnetic shift register with out-of-plane magnetized layers.

Using out-of-plane magnetized layers, a lateral shift register made from discrete elements is demonstrated. By carefully designing the in-plane shape of the elements which make up the shift register, both the position of nucleation of new domains and the coercivity of the element can be controlled. The dipole field from a neighboring element, placed tens of nanometers away, creates a bias field on the nucleation site, which can be used to create a NOT gate. By chaining these NOT gates together, a shift register can be created where data bits consisting of neighboring layers with aligned magnetization are propagated synchronously under a symmetric applied magnetic field. The operation of a 16 element shift register is shown, including field coupled data injection.

Improvement of domain wall conduit properties in cobalt nanowires by global gallium irradiation.

Applications based on the movement of domain walls (DWs) in magnetic nanowires (NWs) require a good DW conduit behavior, i.e. a significant difference between DW nucleation and propagation fields. In this work, we have systematically studied how this property evolves in cobalt NWs grown by focused electron beam induced deposition (FEBID) as a function of global gallium irradiation, for irradiation doses up to 1.24 × 10(17) ions cm(-2). Whereas for high doses the DW conduit is lost, below 6.42 × 10(15) ions cm(-2) the difference between the two fields increases with irradiation, becoming up to ∼9 times larger than for non-irradiated wires, due to a strong increase in the nucleation field, while the propagation field remains approximately constant. This behavior stems from two effects. The first effect is a decrease in the magnetic volume of the parasitic halo around the NW, typically present in FEBID nanostructures, leading to the disappearance of weak nucleation centers. The second effect is the formation of a 20 nm outer shell with Co crystals about twice the size of those forming the NW core, causing a net increase of the local magnetocrystalline anisotropy. The results presented here are important for the potential use of magnetic NWs grown by FEBID in DW-based devices, and might also be of interest for magnetic NWs fabricated by other techniques.

Domain wall interactions at a cross-shaped vertex.

The interaction of two domain walls (DWs) at a cross-shaped vertex fabricated from two ferromagnetic nanowires has been experimentally investigated. Both magnetostatically repulsive and attractive interactions have been probed. It is found that in the repulsive case, a passing DW may directly induce the depinning of another that is already pinned at a vertex. This effect can be qualitatively described by considering only simple, magnetostatic-charge-based arguments. In the attractive case, however, asymmetric pinning is found, with complete suppression of depinning possible. This observed effect is contrary to simple charge-based arguments and highlights the need for full micromagnetic characterization of the DW interactions in more complex systems.

Dynamic oscillations of coupled domain walls.

In domain wall (DW) excitation experiments, nonlinearity (NL) intrinsic to the DW dynamics is often hard to distinguish from perturbation due to the confining potential or DW distortion. Here we numerically investigate the dynamic oscillations of magnetostatically coupled DWs: a system well understood in the quasistatic limit. NL is observed, even for a harmonic potential, due to the intrinsic DW motion. This behavior is principally dependent on terms normally associated with the DW canonical momentum and is in contrast with a NL restoring potential. This NL is not observable in quasistatic measurements, relatively insensitive to the confining potential, and may be tuned by the nanowire parameters. The shown NLs are present in any DW restoring potential and must be accounted for when probing DW potential landscapes.

Correlation between the magnetic imaging of cobalt nanoconstrictions and their magnetoresistance response.

Scanning transmission x-ray microscopy (STXM) and magnetoresistance (MR) measurements are used to investigate the magnetic behavior of a nanoconstriction joining two micrometric electrodes (a pad and a wire). The reversal of the magnetization under variable external static magnetic fields is imaged. By means of a detailed analysis of the STXM images at the nanocontact area, the MR is calculated, based on diffusive anisotropic-MR. This MR agrees well with that obtained from electrical transport measurements, allowing a direct correlation between the MR signal and the magnetic reversal of the system. The magnetization behavior depends on the sample thickness and constriction dimensions. In 40 nm-thick samples, with 20 × 175 nm(2) contact areas, the magnetization at the two sides of the constriction forms a net angle of 90°, with a progressive evolution of the magnetization structure between the electrodes during switching. The MR in those cases has a more peaked shape than with 20 nm-thick electrodes and 10 × 80 nm(2) contact areas, where the magnetization forms 180° between them, with a wide domain wall pinned at the constriction. As a consequence of this configuration, a plateau in the MR is observed for about 20 Oe.

Fast domain wall motion in magnetic comb structures.

Modern fabrication technology has enabled the study of submicron ferromagnetic strips with a particularly simple domain structure, allowing single, well-defined domain walls to be isolated and characterized. However, these domain walls have complex field-driven dynamics. The wall velocity initially increases with field, but above a certain threshold the domain wall abruptly slows down, accompanied by periodic transformations of the domain wall structure. This behaviour is potentially detrimental to the speed and proper functioning of proposed domain-wall-based devices, and although methods for suppression of the breakdown have been demonstrated in simulations, a convincing experimental demonstration is lacking. Here, we show experimentally that a series of cross-shaped traps acts to prevent transformations of the domain wall structure and increase the domain wall velocity by a factor of four compared to the maximum velocity on a plain strip. Our results suggest a route to faster and more reliable domain wall devices for memory, logic and sensing.

Magnetization reversal in individual cobalt micro- and nanowires grown by focused-electron-beam-induced-deposition.

We systematically study individual micro- and nanometric polycrystalline cobalt wires grown by focused-electron-beam-induced-deposition. The deposits were grown in a range of aspect ratios varying from 1 up to 26. The minimum lateral dimension of the nanowires was 150 nm, for a thickness of 40 nm. Atomic force microscopy images show beam-current-dependent profiles, associated with different regimes of deposition. The magnetization reversal of individual nanowires is studied by means of the spatially resolved magneto-optical Kerr effect. Abrupt switching is observed, with a systematic dependence on the wire's dimensions. This dependence of the coercive field is understood in magnetostatic terms, and agrees well with previous results on cobalt wires grown with different techniques. The influence of compositional gradients along the structural profile on the magnetic reversal is studied by using micromagnetic simulations. This work demonstrates the feasibility of using this technique to fabricate highly pure magnetic nanostructures, and highlights the advantages and disadvantages of the technique with respect to more conventional ones.

Exploring the conduction in atomic-sized metallic constrictions created by controlled ion etching.

A novel technique to establish atomic-sized contacts in metallic materials is shown. It is based on etching a (sub)micrometric electrode via a low-energy focused ion beam. The in situ measurements of the nanoconstriction resistance during the etching process permit control of the formation of atomic-sized constrictions with milling time, observing steps in the conductance in the range of the conductance quantum (G(0) = 2e(2)/h), just before entering the tunnelling regime. These constrictions are highly stable with time due to the adherence to a substrate, which allows further studies such as the detailed current-voltage transport investigation reported here. Scanning electron microscopy images are used to correlate the etching process and the constriction microstructure. The high control achieved in the process makes us suggest this technique as a promising route to study physical phenomena in the verge of the metal-tunnel conduction crossover.