Antibacterial activity improvement of dental glass-ceramic by incorporation of AgVO3 nanoparticles.

OBJECTIVE: This study aimed to investigate the role of the incorporation of an antibacterial nanoceramic (AgVO3) on the properties of a restorative dental glass-ceramic. METHOD: A commercially available restorative glass-ceramic, commonly designated as porcelain (IPS d.SIGN) was functionalized with an antibacterial agent (nanostructured ß-AgVO3), synthesized by a hydrothermal route. Both functionalized and pristine samples were processed according to the manufacturer's instructions. All samples were characterized by X-ray diffraction, Rietveld refinement, particle size distribution, Scanning Electron Microscopy, chemical solubility, and Inductively Coupled Plasma Spectroscopy. Their antibacterial potential (Mueller-Hinton test) was analyzed against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). RESULTS: The commercial glass-ceramic showed leucite (KAlSi2O6) as the only detectable crystalline phase, and, for both strains, no antibacterial activity could be detected in the Mueller-Hinton agar plates test. A monophasic, needle-shaped, and nanometric ß-AgVO3 powder was successfully synthesized by a simple hydrothermal route. After thermal treatment, glass-ceramic samples containing different percentages of ß-AgVO3 showed a second crystalline phase of microline [K0.95(AlSi3O8)]. For modified samples, inhibition halos were easily visible on the Mueller-Hinton test, which ranged from 11.1 ± 0.5 mm to 16.6 ± 0.5 mm and 12.7 ± 0.3 mm to 15.5 ± 0.3 mm in the S. aureus and E.coli cultures, respectively, showing that the halos formed were dose-dependent. Also, increasing the percentage of ß-AgVO3 promoted a significant increase in chemical solubility, from 72 µg/cm2 (samples with 1 wt% of ß-AgVO3) to 136 µg/cm2 (samples with 2 wt% of ß-AgVO3), which was associated with the silver and vanadium ions released from the glass matrix. SIGNIFICANCE: Our in vitro results indicate that IPS d.SIGN, as most of the dental glass-ceramics, do not exhibit antibacterial activity per se. Nonetheless, in this concept test, we demonstrated that it is possible to modify dental veneering materials giving them antibacterial properties by adding at least 2 wt% of ß-AgVO3, a nanomaterial easily synthesized by a simple route.

Human-edible protein contribution of tropical beef cattle production systems at different levels of intensification.

Sustainable intensification of tropical grasslands has been identified by researchers and stakeholders as a solution to decrease greenhouse gas emissions and deforestation. However, there are concerns about food security and the role of livestock in feed-food competition between animals and humans involving land and other resources. We aimed to determine the net protein contribution (NPC), a feed-food competitiveness index, of tropical beef cattle raised on extensive systems or finished in pastures or conventional feedlots, under different levels of intensification. We modelled five scenarios, from cow-calf to slaughter, based on common beef cattle practices in Brazil, whose main production system is grazing. Scenario 1 represented the lowest level of intensification and the most extensive system. Scenario 2 represented a moderately extensive system. Scenarios 3, 4, and 5 represented different degrees and practices of intensification, with animals in cow-calf and stocker phases raised solely on well-managed permanent pastures. In Scenario 3, the animals were finished in a feedlot. In Scenarios 4 and 5, all animals in the stocker phase received a protein-energy supplement, but in Scenario 4, animals were finished in a permanent pasture with high-concentrate intake. In Scenario 5, animals were finished in a feedlot. The human-edible protein (heP) conversion efficiency (hePCE) was calculated as the ratio of heP produced (meat) to heP consumed as feed, and the NPC was the product of hePCE using the protein quality ratio, accounting for the digestible indispensable amino acid score content. An hePCE > 1 indicated that meat production did not compete with humans for food, and an NPC > 1 indicated that it contributed positively to meet human requirements. Meat production and heP intake consistently increased with intensification. The greatest hePCE values were from Scenarios 1 (9.2), 2 (2.2), and 3 (1.2), which were essentially pasture-fed systems, compared to Scenarios 4 and 5 (average of 1.0). The NPC varied from 24.1 (Scenario 1) to 2.6 (Scenario 5). The area required to produce 1 kg of carcass decreased from 147 to 45 m2, and the slaughter age decreased from 36 to 21 months from the most extensive to intensive systems. Brazilian beef cattle production contributes positively to the protein requirements of humans without limiting human food supplies. The intensification of tropical grazing beef systems is a key strategy to save land and produce more meat without limiting food for humans, playing an important role in the food security agenda.

Assessment of biofilm formation by Campylobacter spp. isolates mimicking poultry slaughterhouse conditions.

This research aimed to assess the biofilm formation ability of Campylobacter strains under temperature and oxygen stress conditions, similar to those found in the industrial environment, to explain the persistence of this pathogen on the poultry slaughter line. A collection of C. jejuni and C. coli isolates (n = 143) obtained from poultry samples (cecal content and neck skin), collected at slaughterhouse level, from diverse flocks, on different working days, was genotyped by flaA-restriction fragment length polymorphism (RFLP) typing method. A clustering analysis resulted in the assignment of 10 main clusters, from which 15 strains with different flaA-RFLP genotypes were selected for the assessment of biofilm formation ability and antimicrobial susceptibility. Biofilm assays, performed by crystal violet staining method, were conducted with the goal of mimicking some conditions present at the slaughterhouse environment, based on temperature, atmosphere, and contamination levels. Results indicated that many C. jejuni strains with similar flaA-RFLP profiles were present at the slaughterhouse on different processing days. All the strains tested (n = 15) were multidrug-resistant except for one. Biofilm formation ability was strain-dependent, and it appeared to have been affected by inoculum concentration, temperature, and tolerance to oxygen levels. At 10°C, adherence levels were significantly lower than at 42°C. Under microaerobic and aerobic atmospheres, at 42°C, 3 strains (C. jejuni 46E, C. jejuni 61C, and C. coli 65B) stood out, exhibiting significant levels of biofilm formation. C. jejuni strains 46E and 61C were inserted in clusters with evidence of persistence at the slaughterhouse for a long period of time. This study demonstrated that Campylobacter strains from broilers are capable of forming biofilms under conditions resembling the slaughterhouse environment. These results should be seen as a cue to improve the programs of hygiene implemented, particularly in those zones that can promote biofilm formation.

In Vitro and In Vivo Characterization of PLLA-316L Stainless Steel Electromechanical Devices for Bone Tissue Engineering-A Preliminary Study.

Bone injuries represent a major social and financial impairment, commonly requiring surgical intervention due to a limited healing capacity of the tissue, particularly regarding critical-sized defects and non-union fractures. Regenerative medicine with the application of bone implants has been developing in the past decades towards the manufacturing of appropriate devices. This work intended to evaluate medical 316L stainless steel (SS)-based devices covered by a polymer poly (L-lactic acid) (PLLA) coating for bone lesion mechanical and functional support. SS316L devices were subjected to a previously described silanization process, following a three-layer PLLA film coating. Devices were further characterized and evaluated towards their cytocompatibility and osteogenic potential using human dental pulp stem cells, and biocompatibility via subcutaneous implantation in a rat animal model. Results demonstrated PLLA-SS316L devices to present superior in vitro and in vivo outcomes and suggested the PLLA coating to provide osteo-inductive properties to the device. Overall, this work represents a preliminary study on PLLA-SS316L devices' potential towards bone tissue regenerative techniques, showing promising outcomes for bone lesion support.

Energy requirements and efficiency of energy utilization in growing dairy goats of different sexes.

The aim of this study was to investigate the effects of sex on the requirements for maintenance and efficiency of energy utilization in growing Saanen goats. A database from 7 comparative slaughter studies that included 238 Saanen goats was gathered to provide information for the development of prediction equations of energy requirements for maintenance and efficiency of energy utilization. The experimental design provided different levels of metabolizable energy intake (MEI) and empty body weight (EBW). The data were analyzed so that sex (e.g., intact males, castrated males, and females; n = 98, 80, and 60, respectively) was a fixed effect, and blocks nested in the studies and goat sex were random effects. For the development of linear and nonlinear equations, we used the MIXED and NLMIXED procedures in SAS (SAS Institute Inc., Cary, NC). Nonlinear regression equations were developed to predict heat production (HP, kcal/kg0.75 of EBW; dependent variable) from MEI (kcal/kg0.75 of EBW; independent variable). Using the comparative slaughter technique, the net energy requirement for maintenance (NEM) was calculated as the value of HP at MEI equal to zero. Additionally, NEM was evaluated based on the degree of maturity. The metabolizable energy requirement for maintenance was calculated as the value at which HP is equal to MEI. Efficiency of ME utilization for maintenance (km) was calculated as the ratio between NEM and the metabolizable energy requirement for maintenance. Efficiency of energy utilization for growth (kg) was assumed to be the slope of the linear regression of retained energy (RE) on MEI above the maintenance stage (model intercept equal to 0). Efficiencies of RE as protein (kp) and as fat (kf) were calculated using the multiple linear regression of MEI above the maintenance (model intercept equal to 0) on RE as protein and as fat, respectively. Sex affected NEM (75.0 ± 1.76 kcal/kg0.75 of EBW for males and 63.6 ± 2.89 kcal/kg0.75 of EBW for females) and sex did not affect km (0.63). In contrast, sex no longer affected NEM when degree of maturity was considered on its estimation. The kg was different between sexes (0.31 for castrated males and females, and 0.26 for intact males), but kp (0.21) and kf (0.80) were similar between sexes. These results may be useful for improving robustness of the energy requirement recommendations for dairy goats.

Inhibitory Effect of 5-Aminoimidazole-4-Carbohydrazonamides Derivatives Against Candida spp. Biofilm on Nanohydroxyapatite Substrate.

Candida can adhere and form biofilm on biomaterials commonly used in medical devices which is a key attribute that enhances its ability to cause infections in humans. Furthermore, biomaterial-related infections represent a major therapeutic challenge since Candida biofilms are implicated in antifungal therapies failure. The goals of the present work were to investigate the effect of three 5-aminoimidazole-4-carbohydrazonamides, namely (Z)-5-amino-1-methyl-N'-aryl-1H-imidazole-4-carbohydrazonamides [aryl = phenyl (1a), 4-fluorophenyl (1b), 3-fluorophenyl (1c)], on Candida albicans and Candida krusei biofilm on nanohydroxyapatite substrate, a well-known bioactive ceramic material. To address these goals, both quantitative methods (by cultivable cell numbers) and qualitative evaluation (by scanning electron microscopy) were used. Compounds cytocompatibility towards osteoblast-like cells was also evaluated after 24 h of exposure, through resazurin assay. The three tested compounds displayed a strong inhibitory effect on biofilm development of both Candida species as potent in vitro activity against C. albicans sessile cells. Regarding cytocompatibility, a concentration-dependent effect was observed. Together, these findings indicated that the potent activity of imidazole derivatives on Candida spp. biofilms on nanohydroxyapatite substrate, in particular compound 1c, is worth further investigating.

Alginate-nanohydroxyapatite hydrogel system: Optimizing the formulation for enhanced bone regeneration.

Ceramic/polymer-based biocomposites have emerged as potential biomaterials to fill, replace, repair or regenerate injured or diseased bone, due to their outstanding features in terms of biocompatibility, bioactivity, injectability, and biodegradability. However, these properties can be dependent on the amount of ceramic component present in the polymer-based composite. Therefore, in the present study, the influence of nanohydroxyapatite content (30 to 70 wt%) on alginate-based hydrogels was studied in order to evaluate the best formulation for maximizing bone tissue regeneration. The composite system was characterized in terms of physic-chemical properties and biological response, with in vitro cytocompatibility assessment with human osteoblastic cells and ex vivo functional evaluation in embryonic chick segmental bone defects. The main morphological characteristics of the alginate network were not affected by the addition of nanohydroxyapatite. However, physic-chemical features, like water-swelling rate, stability at extreme pH values, apatite formation, and Ca2+ release were nanoHA dose-dependent. Within in vitro cytocompatibility assays it was observed that hydrogels with nanoHA 30% content enhanced osteoblastic cells proliferation and expression of osteogenic transcription factors, while those with higher concentrations (50 and 70%) decreased the osteogenic cell response. Ex vivo data underlined the in vitro findings, revealing an enhanced collagenous deposition, trabecular bone formation and matrix mineralization with Alg-nanoHA30 composition, while compositions with higher nanoHA content induced a diminished bone tissue response. The outcomes of this study indicate that nanohydroxyapatite concentration plays a major role in physic-chemical properties and biological response of the composite system and the optimization of the components ratio must be met to maximize bone tissue regeneration.

The two faces of titanium dioxide nanoparticles bio-camouflage in 3D bone spheroids.

Titanium (Ti) and its alloys are widely used in dental implants and hip-prostheses due to their excellent biocompatibility. Growing evidence support that surface degradation due to corrosion and wear processes, contribute to implant failure, since the release of metallic ions and wear particles generate local tissue reactions (peri-implant inflammatory reactions). The generated ions and wear debris (particles at the micron and nanoscale) stay, in a first moment, at the interface implant-bone. However, depending on their size, they can enter blood circulation possibly contributing to systemic reactions and toxicities. Most of the nanotoxicological studies with titanium dioxide nanoparticles (TiO2 NPs) use conventional two-dimensional cell culture monolayers to explore macrophage and monocyte activation, where limited information regarding bone cells is available. Recently three-dimensional models have been gaining prominence since they present a greater anatomical and physiological relevance. Taking this into consideration, in this work we developed a human osteoblast-like spheroid model, which closely mimics bone cell-cell interactions, providing a more realistic scenario for nanotoxicological studies. The treatment of spheroids with different concentrations of TiO2 NPs during 72 h did not change their viability significantly. Though, higher concentrations of TiO2 NPs influenced osteoblast cell cycle without interfering in their ability to differentiate and mineralize. For higher concentration of TiO2 NPs, collagen deposition and pro-inflammatory cytokine, chemokine and growth factor secretion (involved in osteolysis and bone homeostasis) increased. These results raise the possible use of this model in nanotoxicological studies of osseointegrated devices and demonstrate a possible therapeutic potential of this TiO2 NPs to prevent or reverse bone resorption.

Antibacterial effect and biocompatibility of a novel nanostructured ZnO-coated gutta-percha cone for improved endodontic treatment.

This work explored a novel approach to enhance the antibacterial activity of commercial Gutta-percha (GP) cones, the most commonly used core filling materials used in endodontic treatment. The reported procedure involved an argon (Ar) plasma treatment (PT) of the GP cone surface, followed by the deposition of a ZnO thin film by magnetron sputtering. The resulting surfaces were evaluated for surface topography, antibacterial activity against Enterococcus faecalis and Staphylococcus aureus, and cytocompatibility with human osteoblastic cells. GP cones treated with NaOCl, a routine chair-side protocol, were also tested as reference. The deposition of a ZnO film on pristine GP cones increased its antibacterial activity. Cones pre-treated with Ar-plasma (PT) and coated with the ZnO thin film presented significantly higher antibacterial activity than that observed on the pristine and, also, compared to the ZnO coated cones. The higher antibacterial activity of PT + ZnO cones appears related to the major effects induced by the PT pre-treatment on the cone surface endowing the deposited ZnO film with a homogeneous nanostructured topography that greatly improved surface reactivity. The modified GP cones maintained an appropriate cytocompatibility with human cells. This novel approach provides ready-to-use cones with enhanced antibacterial activity, improving a strict asepsis protocol during endodontic treatment and preventing secondary endodontic infections.

SPINA classification of cleft lip and palate: A suggestion for a complement.

Spina's classification uses the incisive foramen as an anatomic reference to define groups I, II, and III. In some cases, the morphological manifestation of the cleft arises simultaneously pre- and postforamen, but without communicating. Considering that group I refers to isolated clefts of the primary palate and group III includes isolated clefts of the secondary palate, the authors suggest the classification group IIa for the association of these two occurrences in the same patient, thus associating two classifications. The original structure proposed by Spina is maintained and simply complemented and updated to Spina-A classification.

Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants.

This investigation aimed at developing micropatterned silica thin films (MSTFs) containing nanohydroxyapatite (nano-HA) microaggregates that were not completely covered by silica so that they could directly interact with the surrounding cells. The objectives were 1) to evaluate the effect of the presence of 2 films (MSTF with or without nano-HA addition) on the characteristic strength (σ0) and Weibull modulus ( m) of a yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and 2) to evaluate the effect of these 2 films, as applied onto the Y-TZP surface, on the morphology, orientation, and proliferation of MG63 cells. Sol-gel process and soft lithography were used to apply the MSTF onto the Y-TZP specimens. Three experimental groups were produced: Y-TZP, Y-TZP + MSTF, and Y-TZP + MSTF + sprayed nano-HA. All surfaces were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy and tested for 4-point flexural strength ( n = 30) in water at 37 °C. Weibull analysis was used to determine m and σ0 (maximum likelihood method). In vitro biological behavior was performed with human osteoblast-like cells (MG63). Y-TZP was successfully coated with MSFT and MSFT + nano-HA. Scanning electron microscopy micrographs indicated that the microaggregates of nano-HA were not entirely covered by the silica. There was no statistically significant difference among the experimental groups for σ0 and m. In the groups containing the films, the cells were elongated and aligned along the lines. The MSFT + nano-HA group showed significantly higher cell metabolic activity than that obtained for the Y-TZP group at day 7. This investigation was successful in producing an MSTF containing nano-HA microaggregates that remained exposed to the environment. The developed films did not jeopardize the structural reliability of a commercial Y-TZP, as confirmed by the Weibull statistics. The MG63 cells seeded over the films became elongated and aligned along the films' micropatterned lines. Y-TZP specimens coated with MSTF and nano-HA showed a higher cell metabolic activity and proliferation after 7 d of culture when compared with uncoated Y-TZP.

Potential anti-cancer and anti-Candida activity of Zn-derived foams.

Zinc (Zn)-derived foams have been prepared from an alkaline electrolyte solution by galvanostatic electrodeposition under different conditions. A detailed physico-chemical characterization was performed by Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). A pioneer application of these foams in medical implant-related applications was investigated. The in vitro behaviour of these Zn-derived foams in simulated physiological conditions was studied. The results revealed that the presence of zinc oxide was important enough to change the in vitro behaviour of these materials. The potential of these Zn-derived foams in inhibiting bone cancer cell proliferation - osteoscarcoma cells - and important pathogenic fungi responsible for implant-related infections -Candida albicans- was examined. Furthermore, the foams were evaluated for cytocompatibility with normal human osteoblasts. The results obtained allowed us to conclude that Zn-derived foams have an interesting potential for anti-cancer and anti-Candida activity, targeted for bone-related implant applications, suggesting that this novel material may have potential for further clinical studies.

Supercritical CO2 assisted process for the production of high-purity and sterile nano-hydroxyapatite/chitosan hybrid scaffolds.

Hybrid scaffolds composed of hydroxyapatite (HAp), in particular in its nanometric form (n-HAp), and chitosan (CS) are promising materials for non-load-bearing bone graft applications. The main constraints of their production concern the successful implementation of the final purification/neutralization and sterilization steps. Often, the used purification strategies can compromise scaffold structural features, and conventional sterilization techniques can result in material's thermal degradation and/or contamination with toxic residues. In this context, this work presents a process to produce n-HAp/CS scaffolds mimicking bone composition and structure, where an innovative single step based on supercritical CO2 extraction was used for both purification and sterilization. A removal of 80% of the residual acetic acid was obtained (T = 75°C, p = 8.0 MPa, 2 extraction cycles of 2 h) giving rise to scaffolds exhibiting adequate interconnected porous structure, fast swelling and storage modulus compatible with non-load-bearing applications. Moreover, the obtained scaffolds showed cytocompatibility and osteoconductivity without further need of disinfection/sterilization procedures. Among the main advantages, the proposed process comprises only three steps (n-HAp/CS dispersion preparation; freeze-drying; and supercritical CO2 extraction), and the supercritical CO2 extraction show clear advantages over currently used procedures based on neutralization steps. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 965-975, 2018.

Sex effects on macromineral requirements for growth in Saanen goats: A meta-analysis.

The aim of this study was to investigate the effects of sex on the net requirements of growth for Ca (NCa), P (NP), Na (NNa), K (NK), and Mg (NMg) in Saanen goats from 5 to 45 kg BW, with or without consideration of the degree of maturity. A database containing 209 individual records for Saanen goats (69 castrated males, 71 intact males, and 69 females) was generated from 6 comparative slaughter studies. Total amounts of Ca, P, Na, K, and Mg in the body were fitted to logarithmized allometric equations using empty BW (EBW) or degree of maturity (EBW/mature EBW) as regressors. The equations were fitted using a mixed model, where sex was considered a fixed effect and study was considered a random effect. Net requirements were estimated by the first derivative of the logarithmized allometric equations. Then, a Monte Carlo simulation was used to assess the uncertainty of calculated net requirement values. Without considering the degree of maturity, sex did not affect NCa, NP, and NNa ( > 0.10). Conversely, considering the degree of maturity, NCa and NP of intact males were 5% and 2%, respectively, greater than those of castrated males and females ( < 0.01), and NNa of males (castrated and intact) was 6% greater than that of females ( < 0.01). Regardless of approach used, NCa and NP remained constant, whereas NNa decreased by 32% as BW ranged from 5 to 45 kg. Without considering the degree of maturity, NMg of castrated and intact males were 8% and 18% greater than that of female goats ( = 0.054), respectively. Hereof NMg of castrated and intact males increased by 8% and 15%, respectively, whereas that of females decreased by 8% as BW ranged from 5 to 45 kg. Considering the degree of maturity, NMg of castrated and intact males were 7% and 17% greater than that of female goats ( = 0.054), respectively. In this regard, NMg of castrated and intact males increased 8% and 16%, respectively, whereas that of females decreased by 7% from 5 to 45 kg BW. Both approaches showed that, regardless of sex ( > 0.10), NK decreased by 26% (i.e., without considering the maturity degree) or 27% (i.e., considering the degree of maturity) from 5 to 45 kg BW. Therefore, the consideration of maturity stage highlights differences across sexes in the net macromineral requirements for growth in goats. Elucidation of sex effects on macromineral requirements for growth may be useful for improving the accuracy of recommendations for mineral requirements for dairy goats.

Body composition, protein and energy efficiencies, and requirements for growth of F1 Boer × Saanen goat kids.

We conducted a study in which body composition, energy and protein requirements, and efficiency of MP and ME were determined in F1 Boer × Saanen goat kids of 5 to 25 kg BW by using the comparative slaughter technique. Two experiments were performed: Exp. 1 estimated the maintenance requirements of kids from 15 to 25 kg BW, and Exp. 2 estimated the gain requirements of kids from 5 to 25 kg BW. In Exp. 1, 28 intact male F1 Boer × Saanen goat kids were utilized, with 7 kids slaughtered (BW of 15.0 ± 0.35 kg) at the onset for estimation of initial body composition and the remaining 21 kids assigned to a randomized block design. Within each block, kids were subjected to 3 levels of feed intake treatments (ad libitum [100%] or restricted to 70% or 40% ad libitum). All kids in each block were slaughtered when the animals fed ad libitum reached 25 kg BW. The NE, ME for maintenance, and partial efficiency of use of ME for NE were 321.6 kJ/kg BW, 525.9 kJ/kg BW, and 0.61, respectively. The net protein and MP for maintenance were 2.43 g/kg of BW and 4.41 g/kg of BW, respectively; thus, the estimated partial efficiency of MP for maintenance was 0.55. In Exp. 2, 32 intact male F1 Boer × Saanen goat kids were distributed in a completely randomized design and slaughtered at 5.6 ± 0.85 kg BW ( = 6), 10.0 ± 0.35 kg BW ( = 6), 15.3 ± 0.52 kg BW ( = 7), 20.4 ± 0.66 kg BW ( = 6), and 25 ± 0.46 kg BW ( = 7). Body composition was then fitted to allometric equations. Body fat composition increased from 37 to 114 g/kg empty BW (EBW; < 0.001), and body protein composition decreased by 10% (from 203.2 to 180.6 g/kg EBW; < 0.001) when kids grew from 5 to 25 kg BW. The NE increased by approximately 60% (from 7.2 to 11.5 MJ/kg of empty BW gain [EWG]; < 0.001), and the net protein for gain decreased by 10% (from 186 to 166 g/kg of EWG; < 0.001). The partial efficiency of the utilization of ME to NE for growth was 0.32 ( < 0.0001), and the partial efficiencies of the utilization of ME for the synthesis of protein and fat were 0.19 and 0.59 ( < 0.011), respectively. These results demonstrate that the protein and energy maintenance requirements in young crossbred goat kids are greater than values reported previously in feeding system studies. In addition, their requirements for gain depend on body composition and are driven by efficiencies of deposition.

Sex effects on net protein and energy requirements for growth of Saanen goats.

Requirements for growth in the different sexes remain poorly quantified in goats. The objective of this study was to develop equations for estimating net protein (NPG) and net energy (NEG) for growth in Saanen goats of different sexes from 5 to 45 kg of body weight (BW). A data set from 7 comparative slaughter studies (238 individual records) of Saanen goats was used. Allometric equations were developed to determine body protein and energy contents in the empty BW (EBW) as dependent variables and EBW as the allometric predictor. Parameter estimates were obtained using a linearized (log-transformation) expression of the allometric equations using the MIXED procedure in SAS software (SAS Institute Inc., Cary, NC). The model included the random effect of the study and the fixed effects of sex (intact male, castrated male, and female; n = 94, 73, and 71, respectively), EBW, and their interactions. Net requirements for growth were estimated as the first partial derivative of the allometric equations with respect to EBW. Additionally, net requirements for growth were evaluated based on the degree of maturity. Monte Carlo techniques were used to estimate the uncertainty of the calculated net requirement values. Sex affected allometric relationships for protein and energy in Saanen goats. The allometric equation for protein content in the EBW of intact and castrated males was log10 protein (g) = 2.221 (±0.0224) + 1.015 (±0.0165) × log10 EBW (kg). For females, the relationship was log10 protein (g) = 2.277 (±0.0288) + 0.958 (±0.0218) × log10 EBW (kg). Therefore, NPG for males was greater than for females. The allometric equation for the energy content in the EBW of intact males was log10 energy (kcal) = 2.988 (±0.0323) + 1.240 (±0.0238) × log10 EBW (kg); of castrated males, log10 energy (kcal) = 2.873 (±0.0377) + 1.359 (±0.0283) × log10 EBW (kg); and of females, log10 energy (kcal) = 2.820 (±0.0377) + 1.442 (±0.0281) × log10 EBW (kg). The NEG of castrated males was greater than that of intact males and lower than that of females. Using degree of maturity for estimating NPG and NEG, we could remove the differences between sexes. These results indicate that NPG and NEG differ among sexes in growing Saanen goats, and this difference should be accounted for by feeding systems. Including the degree of maturity as predictor cancels out those differences across sexes in protein and energy requirements.

Fasting heat production of Saanen and Anglo Nubian goats measured using open-circuit facemask respirometry.

This study aimed to establish the heat production (HP) of Saanen and Anglo Nubian goats at absorptive (feeding) and at post-absorptive (fasting) statuses to determine the adequate period of fasting required for the measurement of basal metabolism. Gas exchange was recorded via open-circuit facemask respirometry. Six non-lactating and non-pregnant goats of each breed, Saanen (49.2 ± 3.2 kg of body weight, BW) and Anglo Nubian (64.0 ± 3.0 kg BW), were placed in individual pens with ad libitum access to the same total mixed ration. After a 3-day feeding period, the animals were subjected to fasting (no feed), and the gas exchange measurement was performed for 30 min at 0, 12, 20, 36, 44, 60 and 68 h after fasting. The daily HP of the Saanen and Anglo Nubian goats averaged 557.4 ± 38.7 and 357.1 ± 35.3 kJ/kg0.75  BW day respectively. During fasting, the methane production decreased exponentially in both breeds, and the critical time when methane production was statistically equal to zero was at 31 h of fasting for the Saanen goats and at 40 h for the Anglo Nubian goats. The daily HP and respiratory exchange rate during fasting decreased up to 60 h. Taken together, our results suggest that the ideal period to measure fasting heat production (FHP) for goats fed at maintenance levels should be between 40 h and 60 h of fasting. Consequently, the daily FHP, after 60 h of fasting, of Saanen and Anglo Nubian goats was 183.3 ± 16.3 and 211.1 ± 11.5 kJ/kg0.75  BW day respectively. The results presented herein are relevant for future studies of energy metabolism in goats.

Net macromineral requirements in male and female Saanen goats.

These experiments estimated Ca, P, Mg, K, and Na requirements of intact male, castrated male, and female Saanen goats. Two experiments were performed: one to determine the net macromineral requirements for maintenance (Exp. 1) and another to determine net macromineral requirements for growth (Exp. 2). In Exp. 1, 75 goats (26 intact males, 25 castrated males, and 24 females) with initial BW (iBW) of 15.76 ± 0.10 kg were used. These animals were divided in 2 groups: baseline animals and pair-fed animals. Twenty-one goats (8 intact males, 7 castrated males, and 6 females) were slaughtered (16.6 ± 0.96 kg BW) at the beginning of the experiment to be used as the baseline group. The 54 remaining goats (18 intact males, 18 castrated males, and 18 females) were pair fed in 6 blocks of 3 goats per sex. The goats within each block were then randomly allocated to 1 of 3 levels of intake: ad libitum, restricted fed to 75% of the ad libitum intake, and restricted fed to 50% of ad libitum intake. When the animal fed ad libitum reached 31.2 ± 0.58 kg BW, it and the other goats from the same block were slaughtered. The effects of sex and level of intake were evaluated in a split-plot design, where sex was the main plot observation and level of intake was the subplot. Daily net macromineral requirements for maintenance did not differ among the sexes ( > 0.05), and the average values obtained were 35.4 mg Ca, 24.7 mg P, 2.5 mg Mg, 5.0 mg K, and 3.30 mg Na per kg BW∙d. The net requirements for growth in Exp. 2 were obtained using 58 goats (20 intact males, 20 castrated males, and 18 females) with 15.8 ± 0.11 kg iBW, all fed ad libitum. These animals were assigned in a completely randomized design and allocated in 3 slaughter weight groups: 16.6 ± 0.96, 23.1 ± 1.33, and 31.2 ± 0.58 kg BW. The net Ca, P, and Mg requirements for growth were not different among the sexes ( > 0.05). There was a sex effect on net K and Na requirements for growth ( < 0.05). The net K requirements for growth (g/kg ADG) of intact males were greater ( = 0.03) and increased approximately 16%, whereas females and castrated males decreased approximately 11% as BW increased from 15 to 30 kg BW. The net Na requirements for growth (g/kg ADG) increased 9.5% for intact males and decreased 22% for females when the goats grew from 15 to 30 kg BW. Sex, therefore, affects net K and Na requirements for growth, but it does not affect net macromineral requirements for maintenance in Saanen goats.

Using body composition to determine weight at maturity of male and female Saanen goats.

The objective of this study is to provide approaches to determine mature weight of female and intact and castrated male Saanen goats using body composition data. Our database combined 7 comparative slaughter studies and comprised 244 individual records of body composition of intact male ( = 94), female ( = 71), and castrated male ( = 79) Saanen goats weighing from 4.6 to 51.0 kg BW. Nonlinear regressions were fitted to predict empty body water, fat (EBF), protein (EBP), and ash, expressed as amounts and percentages of the empty BW (EBW) and water-free EBW. Candidate equations were selected on the basis of preliminary graphical examination of the observed body composition of the database, and the best one to describe the data was selected on the basis of convergence achievement with coherent biological interpretation. The selected nonlinear functions were the allometric function (Y = ß × EBW) to describe the EBF content and the exponential function (Y = ß × × EBW) to describe EBP content in the water-free matter basis. None of the tested nonlinear functions were able to describe ash content, possibly because of its large variation. Mature weight was assumed to be the weight when net protein deposition (i.e., accretion minus degradation) tended to zero. The EBP (percentage of water-free EBW) plotted against the EBW using the exponential function enabled us to estimate the mature weight of intact and castrated males and females as 83.9, 33.6, and 26.4 kg EBW, respectively, indicating that the decrease of protein accretion of intact males approaches zero later than in females and castrated males during growth. Replacing these mature EBW estimates in the allometric function to describe the fat content in the EBW, we estimated that at maturity, castrated males and females had 21.6% and 22.4% EBF, whereas intact males had 36.8% EBF, which may not be biologically acceptable because it is too high. On the other hand, assuming that a goat matures at 22% EBF, one can backward estimate mature EBW of 42.6, 34.9, and 26.0 kg for intact and castrated males and females, respectively. This study indicated that fat percentage in the body may be used to describe maturity, as long as dietary challenges are not imposed on the animals. In addition, our results confirmed that female Saanen goats reach maturity at a lighter weight than males.