Severe Community-Acquired Pneumonia: Noninvasive Mechanical Ventilation, Intubation, and HFNT.

Severe acute respiratory failure (ARF) is a major issue in patients with severe community-acquired pneumonia (CAP). Standard oxygen therapy is the first-line therapy for ARF in the less severe cases. However, respiratory supports may be delivered in more severe clinical condition. In cases with life-threatening ARF, invasive mechanical ventilation (IMV) will be required. Noninvasive strategies such as high-flow nasal therapy (HFNT) or noninvasive ventilation (NIV) by either face mask or helmet might cover the gap between standard oxygen and IMV. The objective of all the supporting measures for ARF is to gain time for the antimicrobial treatment to cure the pneumonia. There is uncertainty regarding which patients with severe CAP are most likely to benefit from each noninvasive support strategy. HFNT may be the first-line approach in the majority of patients. While NIV may be relatively contraindicated in patients with excessive secretions, facial hair/structure resulting in air leaks or poor compliance, NIV may be preferable in those with increased work of breathing, respiratory muscle fatigue, and congestive heart failure, in which the positive pressure of NIV may positively impact hemodynamics. A trial of NIV might be considered for select patients with hypoxemic ARF if there are no contraindications, with close monitoring by an experienced clinical team who can intubate patients promptly if they deteriorate. In such cases, individual clinician judgement is key to choose NIV, interface, and settings. Due to the paucity of studies addressing IMV in this population, the protective mechanical ventilation strategies recommended by guidelines for acute respiratory distress syndrome can be reasonably applied in patients with severe CAP.

Bacterial Adaptive Memory in Methicillin-Resistant Staphylococcus aureus from Endotracheal Tubes.

OBJECTIVES: To evaluate the expression dynamics of biofilm genes in methicillin-resistant Staphylococcus aureus (MRSA) retrieved from endotracheal tubes (ETT) and to determine how gene regulation is attenuated in vitro where host-environmental factors are no longer present. METHODS: Biofilm was grown (24 h) in tryptic broth soy plus 0.25% glucose for a clinical MRSA isolate in planktonic state and after sessile growth named ETT-MRSA (S2, S3, S4, S5, S6, S7). Gene expression of five biofilm-related genes (icaC, clfB, ebps, fnbB, and RNA III) was assessed consecutively from day 1 to day 4 after ETT growth through real-time PCR. 16S rRNA was used as a control. RESULTS: The MRSA isolates retrieved from ETT were capable of producing biofilms dependent on ica. The gene expression dynamics of ETT-MRSA changed progressively compared to planktonic MRSA gene expression under both ambient air (p < 0.001) and ambient air with 5% CO2 (p < 0.001). Dynamic assessment of icaC expression in both atmospheric conditions showed progressive downregulation in vitro compared to in vivo ETT biofilms. The expression patterns of clfB and ebps genes were similar to icaC. In contrast, the expression of the RNA III gene showed progressive upregulation from day 1 to day 4 (p < 0.001). CONCLUSIONS: MRSA loses its biofilm gene expression in vitro, by adaptive features across multiple generations, as evidenced by the progressive downregulation of icaC and upregulation of RNA III. These findings underscore the significance of host-environment dependence in regulating bacterial biofilm genes, highlighting its importance in diagnostics. Bacterial strains lose their host-specific characteristics as they are cultured in vitro.

Local buckling of cold-formed steel trapezoidal sheets: Data for finite element model validation.

Data is provided from a validation example for a finite element model of a cold-formed steel trapezoidal sheet. The sheet is subjected to bending, failing due to local buckling. The numerical model and the validation procedure are carried out according to the new Eurocode 3 prEN1993-1-14 Design assisted by finite element analysis. Detailed information concerning all aspects needed to reproduce the example is included: (i) the nominal and measured values of the sheet geometry; (ii) the measured material properties of the steel; (iii) the test setup of the validation experiments; (iv) the experimental results; (v) a complete description of the finite element model and solution procedure; and (vi) the finite element results. Additionally, data related to sensitivity studies on the numerical model is also presented, including the effect of the model domain, meshing, and imperfections (shape, magnitude, direction and combinations). Overall, the article aims to provide data and guidance to designers and researchers validating similar numerical models.

Ten Issues to Update in Nosocomial or Hospital-Acquired Pneumonia: An Expert Review.

Nosocomial pneumonia, or hospital-acquired pneumonia (HAP), and ventilator-associated pneumonia (VAP) are important health problems worldwide, with both being associated with substantial morbidity and mortality. HAP is currently the main cause of death from nosocomial infection in critically ill patients. Although guidelines for the approach to this infection model are widely implemented in international health systems and clinical teams, information continually emerges that generates debate or requires updating in its management. This scientific manuscript, written by a multidisciplinary team of specialists, reviews the most important issues in the approach to this important infectious respiratory syndrome, and it updates various topics, such as a renewed etiological perspective for updating the use of new molecular platforms or imaging techniques, including the microbiological diagnostic stewardship in different clinical settings and using appropriate rapid techniques on invasive respiratory specimens. It also reviews both Intensive Care Unit admission criteria and those of clinical stability to discharge, as well as those of therapeutic failure and rescue treatment options. An update on antibiotic therapy in the context of bacterial multiresistance, in aerosol inhaled treatment options, oxygen therapy, or ventilatory support, is presented. It also analyzes the out-of-hospital management of nosocomial pneumonia requiring complete antibiotic therapy externally on an outpatient basis, as well as the main factors for readmission and an approach to management in the emergency department. Finally, the main strategies for prevention and prophylactic measures, many of them still controversial, on fragile and vulnerable hosts are reviewed.

A long-lasting porcine model of ARDS caused by pneumonia and ventilator-induced lung injury.

BACKGROUND: Animal models of acute respiratory distress syndrome (ARDS) do not completely resemble human ARDS, struggling translational research. We aimed to characterize a porcine model of ARDS induced by pneumonia-the most common risk factor in humans-and analyze the additional effect of ventilator-induced lung injury (VILI). METHODS: Bronchoscopy-guided instillation of a multidrug-resistant Pseudomonas aeruginosa strain was performed in ten healthy pigs. In six animals (pneumonia-with-VILI group), pulmonary damage was further increased by VILI applied 3 h before instillation and until ARDS was diagnosed by PaO2/FiO2 < 150 mmHg. Four animals (pneumonia-without-VILI group) were protectively ventilated 3 h before inoculum and thereafter. Gas exchange, respiratory mechanics, hemodynamics, microbiological studies and inflammatory markers were analyzed during the 96-h experiment. During necropsy, lobar samples were also analyzed. RESULTS: All animals from pneumonia-with-VILI group reached Berlin criteria for ARDS diagnosis until the end of experiment. The mean duration under ARDS diagnosis was 46.8 ± 7.7 h; the lowest PaO2/FiO2 was 83 ± 5.45 mmHg. The group of pigs that were not subjected to VILI did not meet ARDS criteria, even when presenting with bilateral pneumonia. Animals developing ARDS presented hemodynamic instability as well as severe hypercapnia despite high-minute ventilation. Unlike the pneumonia-without-VILI group, the ARDS animals presented lower static compliance (p = 0.011) and increased pulmonary permeability (p = 0.013). The highest burden of P. aeruginosa was found at pneumonia diagnosis in all animals, as well as a high inflammatory response shown by a release of interleukin (IL)-6 and IL-8. At histological examination, only animals comprising the pneumonia-with-VILI group presented signs consistent with diffuse alveolar damage. CONCLUSIONS: In conclusion, we established an accurate pulmonary sepsis-induced ARDS model.

Validation of IDSA/ATS Guidelines for ICU Admission in Adults Over 80 Years Old With Community-Acquired Pneumonia

Introduction: The 2007 IDSA/ATS guidelines for community-acquired pneumonia (CAP) recommended intensive care unit (ICU) admission for adults meeting severe CAP criteria. We aimed to validate the accuracy of IDSA/ATS criteria in patients≥80 years old (very elderly patients, VEP) with CAP. Methods: Prospective cohort study of VEP with CAP admitted to three Spanish hospitals between 1996 and 2019. We compared patients who did and did not require ICU admission. We also assessed factors independently associated with ICU admission, as well as the accuracy of severe CAP criteria for ICU admission and mortality. Major criteria include septic shock and invasive mechanical ventilation while minor criteria encompass other variables related to hemodynamics and respiratory insufficiency as well as level of consciousness, renal function, blood parameters indicative of sepsis and body temperature. Results: Of the 2006 VEP with CAP, 519 (26%) met severe CAP criteria, while 204 (10%) required ICU admission. Concordance between severe CAP criteria and the decision to admit the patient to the ICU occurred in 1591 (79%) cases (k coefficient, 0.33), with a sensitivity of 75% and specificity of 80% in predicting ICU admission. All patients with invasive mechanical ventilation received care in ICUs, while 45 (44%) patients with septic shock—previously stabilized in the emergency room—did not. Thirty-day mortality of ICU-admitted patients with septic shock was lower than that of patients in wards (30% vs. 60%, p=0.013). In contrast, patients with severe CAP and only minor criteria had similar mortality. Conclusions: IDSA/ATS criteria for severe CAP predict ICU admission in VEP moderately well. While patients with septic shock and invasive mechanical ventilation warrant ICU admission, severe CAP without major severity criteria in VEP may be acceptably manageable in wards. (AU)

Machine-Learning Model for Mortality Prediction in Patients With Community-Acquired Pneumonia: Development and Validation Study.

BACKGROUND: Artificial intelligence tools and techniques such as machine learning (ML) are increasingly seen as a suitable manner in which to increase the prediction capacity of currently available clinical tools, including prognostic scores. However, studies evaluating the efficacy of ML methods in enhancing the predictive capacity of existing scores for community-acquired pneumonia (CAP) are limited. We aimed to apply and validate a causal probabilistic network (CPN) model to predict mortality in patients with CAP. RESEARCH QUESTION: Is a CPN model able to predict mortality in patients with CAP better than the commonly used severity scores? STUDY DESIGN AND METHODS: This was a derivation-validation retrospective study conducted in two Spanish university hospitals. The ability of a CPN designed to predict mortality in sepsis (SepsisFinder [SeF]), and adapted for CAP (SeF-ML), to predict 30-day mortality was assessed and compared with other scoring systems (Pneumonia Severity Index [PSI], Sequential Organ Failure Assessment [SOFA], quick Sequential Organ Failure Assessment [qSOFA], and CURB-65 criteria [confusion, urea, respiratory rate, BP, age ≥ 65 years]). The SeF models are proprietary software. Differences between receiver operating characteristic curves were assessed by the DeLong method for correlated receiver operating characteristic curves. RESULTS: The derivation cohort comprised 4,531 patients, and the validation cohort consisted of 1,034 patients. In the derivation cohort, the areas under the curve (AUCs) of SeF-ML, CURB-65, SOFA, PSI, and qSOFA were 0.801, 0.759, 0.671, 0.799, and 0.642, respectively, for 30-day mortality prediction. In the validation study, the AUC of SeF-ML was 0.826, concordant with the AUC (0.801) in the derivation data (P = .51). The AUC of SeF-ML was significantly higher than those of CURB-65 (0.764; P = .03) and qSOFA (0.729, P = .005). However, it did not differ significantly from those of PSI (0.830; P = .92) and SOFA (0.771; P = .14). INTERPRETATION: SeF-ML shows potential for improving mortality prediction among patients with CAP, using structured health data. Additional external validation studies should be conducted to support generalizability.

Validation of IDSA/ATS Guidelines for ICU Admission in Adults Over 80 Years Old With Community-Acquired Pneumonia.

INTRODUCTION: The 2007 IDSA/ATS guidelines for community-acquired pneumonia (CAP) recommended intensive care unit (ICU) admission for adults meeting severe CAP criteria. We aimed to validate the accuracy of IDSA/ATS criteria in patients≥80 years old (very elderly patients, VEP) with CAP. METHODS: Prospective cohort study of VEP with CAP admitted to three Spanish hospitals between 1996 and 2019. We compared patients who did and did not require ICU admission. We also assessed factors independently associated with ICU admission, as well as the accuracy of severe CAP criteria for ICU admission and mortality. Major criteria include septic shock and invasive mechanical ventilation while minor criteria encompass other variables related to hemodynamics and respiratory insufficiency as well as level of consciousness, renal function, blood parameters indicative of sepsis and body temperature. RESULTS: Of the 2006 VEP with CAP, 519 (26%) met severe CAP criteria, while 204 (10%) required ICU admission. Concordance between severe CAP criteria and the decision to admit the patient to the ICU occurred in 1591 (79%) cases (k coefficient, 0.33), with a sensitivity of 75% and specificity of 80% in predicting ICU admission. All patients with invasive mechanical ventilation received care in ICUs, while 45 (44%) patients with septic shock-previously stabilized in the emergency room-did not. Thirty-day mortality of ICU-admitted patients with septic shock was lower than that of patients in wards (30% vs. 60%, p=0.013). In contrast, patients with severe CAP and only minor criteria had similar mortality. CONCLUSIONS: IDSA/ATS criteria for severe CAP predict ICU admission in VEP moderately well. While patients with septic shock and invasive mechanical ventilation warrant ICU admission, severe CAP without major severity criteria in VEP may be acceptably manageable in wards.

WITHDRAWN: Validation of IDSA/ATS Guidelines for ICU Admission in Adults Over 80 Years Old With Community-acquired Pneumonia.

The Publisher regrets that this article is an accidental duplication of an article that has already been published, https://doi.org/10.1016/j.arbres.2022.08.012. The duplicate article has therefore been withdrawn. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/policies/article-withdrawal

A Systematic Study of Restorative Crown-Materials Combinations for Dental Implants: Characterization of Mechanical Properties under Dynamic Loads.

This study aimed to find the optimum mechanical characteristics of the restorative materials for the manufacture of implant crowns subjected to impact loading when different combinations of materials are used for the inner and outer crown. Several combinations of external-internal crown restorative materials were analyzed. The dynamic stresses at eight different zones of a dental implant subjected to an impact load and the influence of several mechanical properties, such as the Young's modulus, Poisson's ratio, density, and initial velocity, were analyzed and compared. A detailed 3D model was created, including the crown, the retention screw, the implant, and a mandible section. The model was then built by importing the 3D geometries from CAD software. The whole 3D model was carefully created in order to guarantee a finite element mesh that produced results adjusted to physical reality. Then, we conducted a numerical simulation using the finite element method (FEM). The results of the FEM analysis allowed for evaluating the effect that different combinations of restorative materials and mechanical properties had on the stress distribution in various regions of the implant. The choice of restorative material is a factor to be considered in order to preserve the integrity of osseointegration. Restorative materials transfer more or less stress to the dental implant and surrounding bone, depending on their stiffness. Therefore, an inadequate Young's modulus of the rehabilitation material can affect the survival of the implant over time. Eight interactive graphics were provided on a web-based surface platform to help clinical dentists, researchers, and manufacturers to select the best restorative materials combination for the crown.

Risk Factors and Clinical Impact of Fibrotic-Like Changes and the Organizing Pneumonia Pattern in Patients With COVID-19- and Non-COVID-19-Induced Acute Respiratory Distress Syndrome / Factores de riesgo e impacto clínico de los cambios fibróticos y el patrón de neumonía organizada en los pacientes con síndrome de distrés respiratorio agudo producido o no por COVID-19

No disponible

Prediction of ventilator-associated pneumonia outcomes according to the early microbiological response: a retrospective observational study.

BACKGROUND: Ventilator-associated pneumonia (VAP) is a leading infectious cause of morbidity in critically ill patients, yet current guidelines offer no indications for follow-up cultures. We aimed to evaluate the role of follow-up cultures and microbiological response 3 days after diagnosing VAP as predictors of short- and long-term outcomes. METHODS: We performed a retrospective analysis of a cohort prospectively collected from 2004 to 2017. VAP was diagnosed based on clinical, radiographical and microbiological criteria. For microbiological identification, a tracheobronchial aspirate was performed at diagnosis and repeated after 72 h. We defined three groups when comparing the two tracheobronchial aspirate results: persistence, superinfection and eradication of causative pathogens. RESULTS: 157 patients were enrolled in the study, among whom microbiological persistence, superinfection or eradication was present in 67 (48%), 25 (16%) and 65 (41%), respectively, after 72 h. Those with superinfection had the highest mortalities in the intensive care unit (p=0.015) and at 90 days (p=0.036), while also having the fewest ventilator-free days (p=0.019). Multivariable analysis revealed shock at VAP diagnosis (OR 3.43, 95% CI 1.25-9.40), Staphylococcus aureus isolation at VAP diagnosis (OR 2.87, 95% CI 1.06-7.75) and hypothermia at VAP diagnosis (OR 0.67, 95% CI 0.48-0.95, per +1°C) to be associated with superinfection. CONCLUSIONS: Our retrospective analysis suggests that VAP short- and long-term outcomes may be associated with superinfection in follow-up cultures. Follow-up cultures may help guide antibiotic therapy and its duration. Further prospective studies are necessary to verify our findings.

Associated Determinants Between Evidence of Burnout, Physical Activity, and Health Behaviors of University Students.

Risk behaviors and signs of burnout are associated with substantial health losses and university dropouts. Physical activity can be an effective approach to reduce these factors. The objective of this study was to analyze aspects related to health behaviors, physical activity, and signs of burnout in university students and their association with physical activity. The probabilistic cluster sample consisted of 3,578 regularly enrolled undergraduate students from UFPR in Curitiba, based on a population sample of 24,032 university students. The students completed the MBI-SS and NCHA II instruments. Descriptive statistics were used to identify demographic indicators and characteristics of the university environment. For the proportion of subjects with respective confidence intervals (CI = 95%), contingency tables involving the chi-square test (χ2) were used. The prevalence of signs of burnout was estimated in punctual proportions accompanied by the respective confidence intervals (CI = 95%). To analyze the associations between the independent variables and signs of burnout, the Hierarchical Logistic Regression was used through an analysis adjusted by the other independent variables involved in the models (CI = 95%). Results showed that the prevalence of individuals who showed signs of burnout was 40.4%. The hierarchical multiple regression model pointed to: female sex (OR = 1.30; 1.11-1.51); age between 20-24 years (OR = 1.51; 1.25-1.83); and 25-29 years (OR = 1.69; 1.27-2.24); being single (OR = 2.67; 1.01-7.10); presenting regular/poor health perception (OR = 1.59; 1.13-2.22), belonging to Human Sciences courses (OR = 1.37; 1.14-1.64); attending 2nd or 3rd year (OR = 1.34; 1.12-1.61); poor academic performance (OR = 5.35; 4.11-6.96); mean (OR = 2.08; 1.78-2.43). We conclude that academics showed a high prevalence of health risk behaviors and correlate and diagnose emotional problems and signs of burnout. Signs of burnout were significantly associated with the practice of physical activity in its three dimensions; however, in the adjusted analysis for demographic indicators, the characteristics of the university environment, and health behaviors, physical activity was not significant for the model.

Bone Stress Evaluation with and without Cortical Bone Using Several Dental Restorative Materials Subjected to Impact Load: A Fully 3D Transient Finite-Element Study.

Statement of problem. Previous peri-implantitis, peri-implant bone regeneration, or immediate implant placement postextraction may be responsible for the absence of cortical bone. Single crown materials are then relevant when dynamic forces are transferred into bone tissue and, therefore, the presence (or absence) of cortical bone can affect the long-term survival of the implant. Purpose: the purpose of this study is to assess the biomechanical response of dental rehabilitation when selecting different crown materials in models with and without cortical bone. Methods: several crown materials were considered for modeling six types of crown rehabilitation: full metal (MET), metal-ceramic (MCER), metal-composite (MCOM), peek-composite (PKCOM), carbon fiber-composite (FCOM), and carbon fiber-ceramic (FCCER). An impact-load dynamic finite-element analysis was carried out on all the 3D models of crowns mentioned above to assess their mechanical behavior against dynamic excitation. Implant-crown rehabilitation models with and without cortical bone were analyzed to compare how the load-impact actions affect both type of models. Results: numerical simulation results showed important differences in bone tissue stresses. The results show that flexible restorative materials reduce the stress on the bone and would be especially recommendable in the absence of cortical bone. Conclusions: this study demonstrated that more stress is transferred to the bone when stiffer materials (metal and/or ceramic) are used in implant supported rehabilitations; conversely, more flexible materials transfer less stress to the implant connection. Also, in implant-supported rehabilitations, more stress is transferred to the bone by dynamic forces when cortical bone is absent.

A 3D Finite Element Analysis Model of Single Implant-Supported Prosthesis under Dynamic Impact Loading for Evaluation of Stress in the Crown, Abutment and Cortical Bone Using Different Rehabilitation Materials.

In the literature, many researchers investigated static loading effects on an implant. However, dynamic loading under impact loading has not been investigated formally using numerical methods. This study aims to evaluate, with 3D finite element analysis (3D FEA), the stress transferred (maximum peak and variation in time) from a dynamic impact force applied to a single implant-supported prosthesis made from different materials. A 3D implant-supported prosthesis model was created on a digital model of a mandible section using CAD and reverse engineering. By setting different mechanical properties, six implant-supported prostheses made from different materials were simulated: metal (MET), metal-ceramic (MCER), metal-composite (MCOM), carbon fiber-composite (FCOM), PEEK-composite (PKCOM), and carbon fiber-ceramic (FCCER). Three-dimensional FEA was conducted to simulate the collision of 8.62 g implant-supported prosthesis models with a rigid plate at a speed of 1 m/s after a displacement of 0.01 mm. The stress peak transferred to the crown, titanium abutment, and cortical bone, and the stress variation in time, were assessed.

Impact of Cardiovascular Failure in Intensive CareUnit-Acquired Pneumonia: A Single-Center, Prospective Study.

BACKGROUND: Cardiovascular failure (CVF) may complicate intensive care unit-acquired pneumonia (ICUAP) and radically alters the empirical treatment of this condition. The aim of this study was to determine the impact of CVF on outcome in patients with ICUAP. METHODS: A prospective, single-center, observational study was conducted in six medical and surgical ICUs at a University Hospital. CVS was defined as a score of 3 or more on the cardiovascular component of the Sequential Organ Failure Assessment (SOFA) score. At the onset of ICUAP, CVF was reported as absent, transient (if lasting ≤ 3 days) or persistent (>3 days). The primary outcome was 90-day mortality modelled through a Cox regression analysis. Secondary outcomes were 28-day mortality, hospital mortality, ICU length of stay (LOS) and hospital LOS. RESULTS: 358 patients were enrolled: 203 (57%) without CVF, 82 (23%) with transient CVF, and 73 (20%) with persistent CVF. Patients with transient and persistent CVF were more severely ill and presented higher inflammatory response than those without CVF. Despite having similar severity and aetiology, the persistent CVF group more frequently received inadequate initial antibiotic treatment and presented more treatment failures than the transient CVF group. In the persistent CVF group, at day 3, a bacterial superinfection was more frequently detected. The 90-day mortality was significantly higher in the persistent CVF group (62%). The 28-day mortality rates for patients without CVF, with transient and with persistent CVF were 19, 35 and 41% respectively and ICU mortality was 60, 38 and 19% respectively. In the multivariate analysis chronic pulmonary conditions, lack of Pa02/FiO2 improvement at day 3, pulmonary superinfection at day 3 and persistent CVF were independently associated with 90-day mortality in ICUAP patients. Conclusions: Persistent CVF has a significant impact on the outcome of patients with ICUAP. Patients at risk from persistent CVF should be promptly recognized to optimize treatment and outcomes.

Role of respiratory intermediate care units during the SARS-CoV-2 pandemic.

RATIONALE: The SARS-CoV2 pandemic increased exponentially the need for both Intensive (ICU) and Intermediate Care Units (RICU). The latter are of particular importance because they can play a dual role in critical and post-critical care of COVID-19 patients. Here, we describe the setup of 2 new RICUs in our institution to face the SARS-CoV-2 pandemic and discuss the clinical characteristics and outcomes of the patients attended. METHODS: Retrospective analysis of the characteristics and outcomes of COVID-19 patients admitted to 2 new RICUs built specifically in our institution to face the first wave of the SARS-CoV-2 pandemic, from April 1 until May 30, 2020. RESULTS: During this period, 106 COVID-19 patients were admitted to these 2 RICUs, 65 of them (61%) transferred from an ICU (step-down) and 41 (39%) from the ward or emergency room (step-up). Most of them (72%) were male and mean age was 66 ± 12 years. 31% of them required support with oxygen therapy via high-flow nasal cannula (HFNC) and 14% non-invasive ventilation (NIV). 42 of the 65 patients stepping down (65%) had a previous tracheostomy performed and most of them (74%) were successfully decannulated during their stay in the RICU. Length of stay was 7 [4-11] days. 90-day mortality was 19% being significantly higher in stepping up patients than in those transferred from the ICU (25 vs. 10% respectively; p < 0.001). CONCLUSIONS: RICUs are a valuable hospital resource to respond to the challenges of the SARS-CoV-2 pandemic both to treat deteriorating and recovering COVID-19 patients.

Validation of a Prediction Score for Drug-Resistant Microorganisms in Community-acquired Pneumonia.

Rationale: Recommended initial empiric antimicrobial treatment covers the most common bacterial pathogens; however, community-acquired pneumonia (CAP) may be caused by microorganisms not targeted by this treatment. Developed in 2015, the PES (Pseudomonas aeruginosa, extended-spectrum ß-lactamase-producing Enterobacteriaceae, and methicillin-resistant Staphylococcus aureus) score was developed in 2015 to predict the microbiological etiology of CAP caused by PES microorganisms.Objective: To validate the usefulness of the PES score for predicting PES microorganisms in two cohorts of patients with CAP from Valencia and Mataró.Methods: We analyzed two prospective observational cohorts of patients with CAP from Valencia and Mataró. Patients in the Mataró cohort were all admitted to an intensive care unit (ICU).Results: Of the 1,024 patients in the Valencia cohort, 505 (51%) had a microbiological etiology and 31 (6%) had a PES microorganism isolated. The area under the receiver operating characteristic curve was 0.81 (95% confidence interval [95% CI], 0.74-0.88). For a PES score ≥5, sensitivity, specificity, the negative and positive predictive values as well as the negative and positive likelihood ratios were 72%, 74%, 98%, 14%, 0.38, and 2.75, respectively. Of the 299 patients in the Mataró cohort, 213 (71%) had a microbiological etiology and 11 (5%) had a PES microorganism isolated. The area under the receiver operating characteristic curve was 0.73 (95% CI 0.61-0.86). For a PES score ≥ 5, sensitivity, specificity, the negative and positive predictive values, and the negative and positive likelihood ratios were 36%, 83%, 96%, 11%, 0.77, and 2.09, respectively. The best cutoff for patients admitted to the ICU was 4 points, which improved sensitivity to 86%. The hypothetical application of the PES score showed high rates of overtreatment in both cohorts (26% and 35%, respectively) and similar rates of undertreatment.Conclusions: The PES score showed good accuracy in predicting the risk for microorganisms that required different empirical therapy; however, its use as a single strategy for detecting noncore pathogens could lead to high rates of overtreatment. Given its high negative predictive value, the PES score may be used as a first step of a wider strategy that includes subsequent advanced diagnostic tests.

Comparison between experimental digital image processing and numerical methods for stress analysis in dental implants with different restorative materials.

The aim of this study is to evaluate the stresses transferred to peri-implant areas from single implants restored with different restorative materials and subjected to a static vertical load with low eccentricity. A total of 12 crowns were made with four types of materials: carbon fiber-composite, metal-ceramic, metal-composite, and full-metal, all of them cemented over a titanium abutment. Three different ways of approaching the problem have been used independently to verify the robustness of the conclusions. The experimental results of stress distribution around the implant were obtained by two image processing techniques: Digital Photoelasticity and Digital Image Correlation (DIC). The tests have been modelled by 3D Finite Element Method (FEM). The FEM models have also been used to study the sensitivity of the results to slight changes in geometry or loads, so that the robustness of the experimental techniques can be analyzed. In addition, the realistic bone morphology of the mandible has also been modelled by FEM, including the cortical and trabecular bone property distinctions.