Primary Failure of Dental Eruption Due to Variants Parathyroid Hormone Receptor 1: Retrospective Study and Proposal of Guidelines Treatment.

OBJECTIVE: Primary failure of eruption is characterized by a nonsyndromic defect in tooth eruption in the absence of mechanical obstruction. It is correlated to rare heterozygous variants in the parathyroid hormone receptor 1 gene. The management of primary failure of eruption is complex because many therapies are ineffective. The present study aimed to compare the clinical outcomes of our patients with the findings reported in the literature, and to propose a treatment guideline based on the literature and our experience. METHODS: Retrospective study of patients affected by primary dental eruption failure in the department and analyse of the results and compare with those of the litterature. RESULTS: Twelve patients belonging to 5 families (9 males, 3 females; 13-52 y old) diagnosed and treated in the maxillofacial surgery and stomatology department of the Lille University Hospital were included. All patients showed posterior tooth involvement, and most patients showed bilateral defects. None of the affected teeth had coronal alveolar bone, whereas 6 patients showed root resorption in the affected teeth. Genetic analyses, performed on 11 patients, identified a parathyroid hormone receptor 1 disease-causing variant in 7 of them (63%). Multidisciplinary treatment was required to rehabilitate these patients. Orthodontic interventions, even at an early age, are difficult in affected teeth, which are often blocked or have internal resorption. Moreover, retention of these affected teeth during growth leads to dentoskeletal malocclusions, requiring difficult surgical management in the long term. Therefore, early extraction of these teeth is frequently recommended once the diagnosis has been confirmed. An implant-borne prosthetic rehabilitation can then be achieved at the end of growth after correction of the jaw discrepancy. In case of a late diagnosis, other surgical or noninvasive techniques may be used depending on the clinical situation. Distraction osteogenesis or segmental osteotomy could be discussed for patients with mild phenotypes. CONCLUSIONS: Early diagnosis of primary eruption defects is crucial to offer appropriate management as early as possible, and so to avoid late complicated treatments.

Facial dog bites in children: A public health problem highlighted by COVID-19 lockdown.

BACKGROUND: Stay-at-home injunction during COVID-19 pandemic led to new dynamics in households and increased the risk of domestic accidents involving pets. The aim of the study was to demonstrate an increase of facial dog bites in children during first lockdown period in France, compared to the same period in 2018 and 2019. Secondary objective was to investigate the demographics and circumstances in which dog bites occurred. METHODS: A retrospective multicentric study was conducted nationwide. Patients under 18 years old managed in fifteen oral and maxillofacial surgery departments for a dog bite were included. RESULTS: Eighty-seven patients were included. A significant increase of the number of children managed for facial dog bite was noticed in 2020 (p=0.0005). The male-to-female ratio was significantly reversed in 2020 with more bites in girls than boys (p=0.02). In 2020, children were mostly bitten to cheeks (28.6 %), lips-and-chin region (26.2 %), and eyelids (23.8 %). Severe bites increased in 2020, in comparison with 2018 and 2019. Dog bites occurring while petting or playing significantly increased in 2020 (31 %) (p=0.03). CONCLUSION: The process leading to bites is highly dependent on the balance of dog-owner relationship. This was strongly disrupted during COVID-19 pandemic, resulting in the increase of dog bites in households. Regarding dog bites, face is the most vulnerable area in children. Its injury has lots of esthetic and functional consequences and maxillofacial surgeons have a key role to play in their prevention. Reminders of some of these management and prevention strategies are presented in this article.

Strip pharyngoplasty as a secondary functional surgery for persistent velopharyngeal insufficiency in cleft palate.

Despite a satisfactory primary repair, velopharyngeal insufficiency (VPI) may be a sequel of soft palate clefts, resulting in hypernasality and phonation disorders. In order to increase the function of the pharyngeal flap during a secondary pharyngoplasty, we have developed a strip pharyngoplasty technique involving the middle constrictor muscle of the pharynx. This article describes the successive steps of the intervention and discuss its indications, advantages and limitations. Strip pharyngoplasty as a secondary functional surgery for persistent VPI after primary cleft palate repair is an attractive surgical procedure, particularly adapted to cases with defective muscle contraction by providing a muscle contingent in addition to the mucosal flap.

Robotic calvarial bone sampling.

The aim of this study was to assess the feasibility of complex unicortical calvarial harvesting by using the Cold Ablation Robot-Guided Laser Osteotome (CARLO® primo+). A cadaveric study was performed with a progressive complexity of the bone harvesting. This preliminary study on the cadaveric cranial vault area examined the tracking precision, the strategies, settings and durations of harvesting, the accuracy of the unicortical bone cutting, and the risk of dura exposition. All sampling was realised with no more difficulty than that experienced during the standard procedure. No bicortical cutting occurred during CARLO® primo + robot-guided laser cutting. During the second sampling, dura was partially exposed due to improper angulation of the curved osteotome during harvesting. Complex unicortical calvarial harvesting using robot-guided laser appears to be feasible and safe. In the future, robotic approaches will probably replace current surgical techniques using cutting guides and help reduce intraoperative inaccuracies due to the human factor.

Impact of Mandibular Symphyseal Distraction Osteogenesis (MSDO) on the Sagittal Dimension and Long-Term Skeletal stability.

OBJECTIVE: To evaluate the long-term effects of mandibular symphyseal distraction osteogenesis (MSDO) on the correction of class II malocclusion correction and dental crowding. MATERIALS AND METHODS: Twenty-two patients received MSDO and presented class II malocclusion with transverse mandibular discrepancy. The authors collected data on 2 different cephalometric analyses. On Tweed analysis, The authors recorded ANB, SNA, SNB, and FMA angles. On Delaire analysis, we recorded the distance from Pti (pterygoid inferior) to ENAt (anterior nasal spine) and the distance from Cos (superior condyle) to Pog (pogonion). Superimpositions studies were performed at pre-treatment phase (T1) and post-treatment phase (T2) to evaluate the new position and changes in the dimensions of the mandible and maxilla. RESULTS: On superimposition of Tweed analysis of T1 and T2, reduction of ANB was seen in 18 patients, no change in ANB in 2 patients, and increase in ANB (by 1 deg) in 2 patients. Superimposition of Delaire analysis showed a mean difference of 0.3 mm (SD, 3.6 mm) between T1 and T2 for the maxilla and a mean difference of 6.0 mm (SD, 7.3 mm) for the mandible. CONCLUSIONS: Mandibular symphyseal distraction osteogenesis performed after the pubertal growth peak can effectively correct class II malocclusion and dental crowding with a single light surgical procedure.

In Vitro and In Vivo Evaluation of a Bio-Inspired Adhesive for Bone Fixation.

Compared to metallic hardware, an effective bone adhesive can revolutionize the treatment of clinically challenging situations such as comminuted, articular, and pediatric fractures. The present study aims to develop such a bio-inspired bone adhesive, based upon a modified mineral-organic adhesive with tetracalcium phosphate (TTCP) and phosphoserine (OPS) by incorporating nanoparticles of polydopamine (nPDA). The optimal formulation, which was screened using in vitro instrumental tensile adhesion tests, was found to be 50%molTTCP/50%molOPS-2%wtnPDA with a liquid-to-powder ratio of 0.21 mL/g. This adhesive has a substantially stronger adhesive strength (1.0-1.6 MPa) to bovine cortical bone than the adhesive without nPDA (0.5-0.6 MPa). To simulate a clinical scenario of autograft fixation under low mechanical load, we presented the first in vivo model: a rat fibula glued to the tibia, on which the TTCP/OPS-nPDA adhesive (n = 7) was shown to be effective in stabilizing the graft without displacement (a clinical success rate of 86% and 71% at 5 and 12 weeks, respectively) compared to a sham control (0%). Significant coverage of newly formed bone was particularly observed on the surface of the adhesive, thanks to the osteoinductive property of nPDA. To conclude, the TTCP/OPS-nPDA adhesive fulfilled many clinical requirements for the bone fixation, and potentially could be functionalized via nPDA to offer more biological activities, e.g., anti-infection after antibiotic loading.

Is panoramic radiography adequate for diagnosing coronoid process hyperplasia? A case series.

INTRODUCTION: The objective of this study was to compare the length ratios obtained on panoramic radiography and computed tomography (CT) to verify whether the former is adequate for diagnosing coronoid process hyperplasia. METHODS: A case series of patients with coronoid process hyperplasia was investigated. Length ratios between the coronoid process and condyle were measured on panoramic radiographs by using the Levandoski method and on CT scans by using the methods described by Tavassol et al. and Stopa et al. The mean length ratios obtained using the three measurement methods were compared. RESULTS: The mean length ratio measured with the Levandoski method was significantly lower than that measured with the method described by Stopa et al. (1.09 [0.09] vs. 1.21 [0.09]; P = 0.0001) and lower than that measured with the method described by Tavassol et al. (1.09 [0.09] vs. 1.34 [0.44]; P = 0.013). CONCLUSION: Panoramic measurement of the coronoid process by using the Levandoski method tended to underestimate the length ratio, emphasizing the importance of using a scanographic measurement method at the slightest doubt to confirm the diagnosis of coronoid process hyperplasia.

Three-dimensional Assessment of Autologous Calvarial Bone Grafting for Alveolar Clefts Reconstruction in Pediatric Population: A Retrospective Study.

Reconstruction of alveolar clefts using cancellous bone graft is associated with a high rate of resorption. The aim of this study was to evaluate the osseointegration capacity of cortical calvarial bone grafting using 3-dimensional imaging assessment for alveolar cleft reconstruction in pediatric population.All alveolar bone grafting procedures performed between January 2015 and October 2017 in the maxillofacial surgery department of Lille University Hospital were included. All patients were evaluated clinically and by 3-dimensional imaging before bone grafting and at 3 months after surgery. Cleft and bone graft volumes were assessed using Horos software, v. 3.3.5, through a segmentation process. The bone filled ratio at 3 months after surgery was calculated. A total of 48 alveolar bone grafting procedures were performed in 37 patients: 3 unilateral cleft lip and alveolar, 20 unilateral cleft lip and palate, and 25 bilateral full cleft lip and palate (3 patients had only unilateral surgery). The mean bone filled ratio was 72.27%±23.65%, 81% for unilateral cleft lip and alveolus, 75.4%±20.6 for unilateral cleft lip and palate, and 65.5%±30 for bilateral complete cleft lip and palate ( P =0.1981). Calvarial bone grafting seems to be a relevant alternative to other donor sites for alveolar cleft reconstruction.

ACTN3 genotype influences masseter muscle characteristics and self-reported bruxism.

OBJECTIVES: Main aim of the study was to explore the association between genetic polymorphisms in ACTN3 and bruxism. Secondary objectives included masseter muscle phenotypes assessment between bruxers and non-bruxers and according to genetic polymorphisms in ACTN3. MATERIALS AND METHODS: Fifty-four patients undergoing orthognathic surgery for correction of their malocclusion were enrolled. Self-reported bruxism and temporomandibular disorders status were preoperatively recorded. Saliva samples were used for ACTN3 genotyping. Masseter muscle samples were collected bilaterally at the time of orthognathic surgery to explore the muscle fiber characteristics. RESULTS: There were significant differences in genotypes for rs1815739 (R577X nonsense) (p = 0.001), rs1671064 (Q523R missense) (p = 0.005), and rs678397 (intronic variant) (p = 0.001) between bruxers and non-bruxers. Patients with self-reported bruxism presented a larger mean fiber area for types IIA (p = 0.035). The mean fiber areas in individuals with the wild-type CC genotype for rs1815739 (R577X) were significantly larger for type IIA fibers (1394.33 µm2 [572.77 µm2 ]) than in those with the TC and TT genotypes (832.61 µm2 [602.43 µm2 ] and 526.58 µm2 [432.21 µm2 ] [p = 0.014]). Similar results for Q523R missense and intronic variants. CONCLUSIONS: ACTN3 genotypes influence self-reported bruxism in patients with dentofacial deformity through specific masseter muscle fiber characteristics.

Simultaneous Mandibular Anterior Segmental Osteotomy and Genioplasty: A Novel Technique.

The current standard approach to treat class II malocclusion is orthodontic preparation followed by a mandibular advancement through bilateral sagittal split osteotomy associated or not with a genioplasty. However, when a malocclusion with an important incisors' axis deviation is associated with a chin malposition, an alternative technique can be considered: simultaneous mandibular anterior segmental osteotomy and genioplasty. This technique is performed without a bony bridge between osteotomies. Care must be taken not to wound the lingual mucosa. If preserved, this technique is safe. The result is stable and predictable.

3D printing for orbital volume anatomical measurement.

PURPOSE: The aim was to develop a method for reproducible orbital volume (OV) measurement in vivo based on 3D printing. METHODS: Twelve orbits were obtained from dry skulls of the Human Anatomy Department of Lille University. Computer tomography (CT) slice images of these orbits were transformed into stereo-lithography (STL) format and 3D-printed. Bone openings were closed using either putty and cellophane after printing (3D-Orb-1) or at the printing stage in silico using MeshMixer (3D-Orb-2). The results were compared with those of the conventional water-filling method as a control group (Anat-Orb). RESULTS: The observers reported a mean orbital volume of 21.3 ± 2.1 cm3 for the open-skull method, 21.2 ± 2.4 cm3 for the non-sealed 3D-printing method, and 22.2 ± 2.0 cm3 for the closed-print method. Furthermore, the intraclass correlation coefficients (ICCs) showed excellent intra-rater agreement, i.e., an ICC of 0.994 for the first observer and 0.998 for the second, and excellent interobserver agreement (ICC: 0.969). The control and 3D-Orb-1 groups show excellent agreement (ICC: 0.972). The 3D-Orb-2 exhibits moderate agreement (ICC: 0.855) with the control and appears to overestimate orbital volume slightly. CONCLUSION: Our 3D-printing method provides a standardized and reproducible method for the measurement of orbital volume.

Autogenous bone grafting with conventional implants vs zygomatic implants for atrophic maxillae: a retrospective study of the oral health-related quality of life.

INTRODUCTION: Autogenous bone grafting (ABG)-combined or not with Le Fort I osteotomy (LFIO)-and zygomatic implants (ZI) are two reliable techniques for the fixed rehabilitation of atrophic maxillae. ZI allow a reduced treatment duration with no need to graft, immediate loading and in principle less morbidity. The aim of this retrospective study was to compare these two protocols on oral health-related quality of life (OHRQoL). We also discussed implant and prosthetic survival rates, and biological complications. MATERIAL AND METHODS: All patients who benefited from ZI or ABG with conventional implants (CI) for a fixed maxillary rehabilitation, from November 2011 to April 2019, were included: 21 patients in the ABG group and 22 in the ZI group. OHRQoL was evaluated postoperatively by OHIP-14 questionnaire. RESULTS: OHIP-14 median scores were respectively 6.5 (interquartile range [IQR] 2.0-13.0) and 6.0 (IQR 3.0-10.0) without significant difference (p = 0.97). Implant/prosthetic survival rates were 97.9%/100% and 97.1%/95.5%. Biological complications rates were 33.3% and 36.4% without significant difference (p = 0.83). DISCUSSION: The type of surgery or prosthesis does not seem to affect final OHRQoL, implant and prosthetic survival rates or biological complications rates.

Radiographic volumetric risk factors for late enophthalmos prediction in orbital blow-out fractures: A retrospective study.

The aim of this study was to assess the correlation between volumetric risk factors, orbital volume (OV), orbital volume ratio (OVR), herniated volume (HV), and the newly described herniated volume ratio (HVR), with the occurrence of late enophthalmos. Patients presenting a unilateral unoperated blow-out fracture were retrospectively included. OV and HV were measured using planimetry on the initial CT scan images. OVR and HVR were then calculated. Enophthalmos was measured on the 2-month follow-up CT scan images. The population was divided into two groups according to their enophthalmos status. Correlations and multiple linear regression model were used. 17 patients out of 45 presented a late enophthalmos of 1 mm or more. There were significantly higher OVR (107 (3.76); p < 0.0001), HV (0.8 (0.47); p < 0.0001) and HVR (3.3 (1.82); p < 0.0001) in the enophthalmos group. A very strong linear correlation between enophthalmos and OVR (rs = 0.806), HV (rs = 0.948) and HVR (rs = 0.951) was found. Enophthalmos prediction using these volumetric parameters can help the surgeon's decision-making in orbital blow-out fractures in order to prevent late enophthalmos. Measurement is simple and reproducible. However, larger prospective studies are needed to confirm these results.

Dental and maxillofacial manifestations of Steinert's myotonic dystrophy: A retrospective case series and therapeutic investigation.

This retrospective study was performed to analyse the facial features and occlusal anomalies in 18 patients with Steinert's myotonic dystrophy (MD1). Medical and surgical management issues noted in this study may contribute to clinical decision-making. This series included 18 patients with MD1 who presented for maxillofacial consultations. For all patients, the following characteristics were assessed: sex, age, intellectual ability, oral condition, initial assessment of the occlusion and facial aspect. In total, 11 of 18 patients underwent surgery (10 achieved occlusion modification, whereas one did not). amongst patients who underwent surgery and achieved occlusion modification, six had stable class I results and four had unstable results or exhibited a slight degradation. Facial muscles play an important role in craniomaxillofacial development and facial aspects. A high prevalence of malocclusions is present in patients with MD1. Orthodontics and orthognathic surgery can improve the quality of life for affected patients. However, the long-term results of these treatments may be disappointing, and relapse can occur in patients with the most severe disease. Aspects of disease to consider while planning for surgery include oral health, risks of instability and relapse, and risks involving anaesthesia.

Quality of Life After Total Temporomandibular Joint Prothesis Surgery.

INTRODUCTION: Total temporomandibular joint (TMJ) prostheses are increasingly used in patients with joint destruction presenting significant pain and mouth opening limitation. This surgery can be considered as the last resort solution whose goal is to restore the mandible function. The aim of this study was to evaluate the patient quality of life (QoL) before and after TMJ replacement surgery with a total TMJ prosthesis, using a modified QoL scale. MATERIALS AND METHODS: All patients with a total uni or bilateral TMJ prosthesis who could be contacted were included. All patients completed 2 retrospective questionnaires: once relative to the preoperative QoL and another for the post-operative QoL, including the assessment of mouth opening limitation, daily eating difficulties and also a QoL score, adapted from the TMJ-QoL questionnaire. RESULTS: A total of 17 patients were included: 13 temporomandibular ankylosis, 3 condylar resorptions and 1 congenital malformation. Mouth opening limitation and daily eating difficulties were significantly reduced after surgery ( P < 0.001). Nine of the 11 QoL questions showed a significant decrease in score and thus an improvement of the QoL after surgery: having a conversation ( P = 0.006), eating ( P < 0.001), yawning ( P < 0.001), sleeping ( P = 0.043), recreational activities ( P = 0.005), relaxing ( P = 0.021), feeling depressed because of TMJ problems ( P = 0.032), daily activities ( P = 0.008) and patient self-assessment of QoL ( P = 0.003). Two showed no significant difference: taking analgesics, and social life. Total score of QoL showed a significant improvement ( P = 0.003). CONCLUSIONS: Quality of life, mouth opening, and daily eating were significantly improved after total TMJ prosthesis, in agreement with the litterature. The TMJ prosthesis could be considered ealier in the management of end-stage temporomandibular disease.

The inception of a hospital-based dental emergency department in a precarious region decreases the incidence of severe cellulitis of odontogenic origin.

INTRODUCTION: Although most localized odontogenic infections can be managed successfully without complications, some can cause extensive morbidity through the onset of cervicofacial cellulitis. The management of these more severe infections generally requires emergency treatment, including surgical treatment under general anesthesia, and prolonged length of hospital stay. MATERIAL & METHODS: In this work, we assessed the impact of the provision of a hospital-based dental emergency department on the regional incidence of severe odontogenic cellulitis in a socioeconomically precarious region. Monthly case rates of odontogenic cellulitis treated between January 2010 and December 2019 at the hospital-based dental emergency department of Lille Medical University Hospital were collected. RESULTS: The mean number of monthly severe odontogenic cellulitis cases treated under general anesthesia was significantly higher before than after the inception of the hospital-based dental emergency service [14.07 (5.83) vs 8.79 (4.42); p<0.0001]. Conversely, the monthly mean number of collected odontogenic cellulitis cases treated under local anesthesia was significantly lower before the emergency service was set up [22.42 (12.73) vs 43.32 (23.41); p<0.0001]. CONCLUSION: The provision of a hospital-based dental emergency department resulted in a decrease in severe dental infections in a region with high indices of socioeconomic precarity, morbidity and mortality. Greater accessibility to dental care allows for the rationalization of care through more precocious and fewer burdensome procedures.

Effect of modified bilateral sagittal split osteotomy on inferior alveolar nerve neurosensory disturbance.

The aim of this study was to assess the occurrence of neurosensory disturbance of the inferior alveolar nerve (IAN) following modified mandibular bilateral sagittal split osteotomy (BSSO) that preserves the mandibular inferior border. All patients undergoing BSSO, associated or not with a Le Fort I osteotomy (performed by the same senior operator) between January 2018 and December 2019, were eligible. The modified BSSO consists of a modification of the technique described by Epker: the bony section of the buccal cortex stops 3-4 mm above the basal mandibular edge. While respecting the basilar border, sectioning is then performed up to the gonial angle where bicortical section is finally performed. Sensibility of the labial and chin area was evaluated immediately postoperatively, and at six months and two years of follow up. A total of 140 eligible patients underwent the modified BSSO between January 2018 and December 2019, and 72 were included. Hypoaesthesia was found in 81.9% of the patients (59/72 patients) at initial evaluation. It decreased to 45.8% (33/72 patients) at the six-month examination and to 12.5% (9/72 patients) at the last examination. Four bad splits were recorded. The modified BSSO preserves the inferior border of the mandible and maintains the IAN in the lingual fragment. There is no need to release the IAN, hence its manipulation is reduced and the incidence of IAN postoperative hypoaesthesia is also reduced.

Three-dimensional printing models improve long-term retention in medical education of pathoanatomy: A randomized controlled study.

Craniosynostosis is a rare and complex pathology, and visuospatial skills are necessary for a good understanding of the condition. While the use of three-dimensional (3D) models has improved the understanding of complex craniofacial anatomy, no study has evaluated the impact of this teaching support on long-term retention. Our randomized controlled trial was designed to compare the long-term retention of information with 3D-printed models of four types of craniosynostosis versus classic 3D reconstructions displayed in two-dimensional (2D) among undergraduate students. All students benefited from the same standardized course followed by the manipulation of the learning tool associated with the group for 15 min. Long-term retention was assessed by the capability to properly recognize different types of craniosynostosis 3 weeks after the course. Eighty-five students were enrolled. Previous educational achievements and baseline visuospatial skills were similar between the groups. The bivariate analysis showed the mean score in the 3D and 2D groups were 11.32 (2.89) and 8.08 (2.81), respectively (p < 0.0001). 3D-printed models of structures with spatial complexity such as various craniosynostosis patterns improve significantly medical students' long-term retention, indicating their educational efficacy.