RESUMO
Single crystalline Ni-Mn-Ga is well known as a prototype ferromagnetic shape memory alloy (FSMA) exhibiting a giant magnetic field-induced strain (MFIS), up to 12%, due to the magnetically driven twin boundary rearrangement. The large stroke and fast magnetomechanical response make it important for actuators and sensors. Polycrystalline Ni-Mn-Ga is inexpensive and technologically easy accessible, but constrains from the grain boundaries inhibit the twin boundary motion, whereby a very low MFIS is observed. Here, we have shown for the first time that a polycrystalline Ni-Mn-Ga can be split into the magnetostrain-active single grains which, being specially assembled in a silicone polymer matrix, caused large and fully reversible MFIS of the resulting composite. We termed the unique reversibility of a large MFIS of the composite as the magnetic field-induced rubber-like behavior. The magnetostrain of individual particles was explored by the X-ray µCT 3D imaging. The results suggest novel solutions for development of the low cost magnetic actuators and sensors for haptic applications.
RESUMO
The Ion Source Hydrogen positive is a 2.7 GHz off-resonance microwave discharge ion source. It uses four coils to generate an axial magnetic field in the plasma chamber around 0.1 T that exceeds the ECR resonance field. A new magnetic system was designed as a combination of the four coils and soft iron in order to increase the reliability of the source. The description of the simulations of the magnetic field and the comparison with the magnetic measurements are presented. Moreover, results of the initial commissioning of the source for extraction voltage until 50 kV will be reported.
RESUMO
Magnetic [FeNi (170 nm)/Ti (6 nm)]3/Cu (L(cu) = 250 or 500 nm)/[Ti (6 nm)/FeNi (170 nm)]3 multilayers were designed with focus on high frequency applications. They were deposited onto glass or a microfluidic system compatible flexible Ciclo Olefin Copolymer substrate and comparatively tested. A maximum sensitivity for the total impedance of 110%/Oe was obtained for a driving current frequency of 30 MHz for [FeNi/Ti]3/Cu (L(cu) = 500 nm)/[Ti/FeNi]3 multilayers deposited onto a glass substrate and 45%/Oe for a driving current frequency of 65 MHz for the same multilayers deposited onto the flexible polymer substrate, a very promising result for applications. The possibility of using flexible substrate/[FeNi/Ti],/Cu/[Ti/FeNi]3 multilayers as MI pressure-sensitive elements was also demonstrated.