Determination of liquid-vapor equilibrium and critical properties of fatty acids for biodiesel production through molecular dynamics.

In recent years, biodiesel production has emerged as an option for renewable and green fuel generation due to the constant reduction of fossil fuel reservoirs. Biofuels as biodiesel also show valuable attributes, environmentally speaking, due to their low environmental impact, contributing to the achievement of sustainability. However, costs are not allowable for large-scale production. Thereby, several novel processes have been proposed (e.g., reactive distillation) to solve this issue. An inconvenience for the development of these processes is the little information in the literature about the critical properties of fatty acids, which are precursors of biodiesel. Determination of critical properties for fatty acids through experimentation is difficult. The reason is that fatty acids tend to self-associate (to dimerize) due to carboxylic groups presence through hydrogen bonds, and consequently, have higher boiling points than other compounds of similar molecular mass (e.g., hydrocarbons, esters). Therefore, alternative methods for this determination are required. One choice is the group-contribution method, which is based on the structure of the molecule; however, results can significantly vary among different group-contribution approaches. Another alternative (and the focus of this research) for the determination of these properties is molecular simulation techniques. In this work, the liquid-vapor equilibrium as a function of temperature and the surface tension of three pure fatty acids of long chain (linoleic, oleic, and palmitic acid) have been calculated. Simulations have been performed by molecular dynamics using the method of direct determination of phase coexistence with the software GROMACS; in which the transferable potentials for phase equilibria united atom forcefield (TraPPE-UA) have been implemented for these specific molecules. Orthobaric densities and surface tension values have been reported at temperatures near the critical point (from 650 K to 800 K). Critical properties (temperature, pressure, density) have been extrapolated from trajectories obtained in these simulations using scaling law relations. Critical properties for these compounds are not available experimentally, therefore, group contribution calculations from the literature were used as a reference. In this comparison, the palmitic acid properties calculated in this work, show the best agreement among the three substances investigated.

Gelatin as a Photosensitive Material.

Because this issue journal is dedicated to Gelatin, here we present a few applications of gelatin in the field of optics. Optics is the science that studies the production, propagation, interaction and detection of light. Various materials sensitive to light (photosensitive) are used for detection of light, such as photomultipliers, CCDs, crystals, two dimensional (2D) materials and more. Among the 2D materials, the most popular for several centuries has been gelatin based photographic emulsion, which records spatial distributions of light. More recently (1970), films made of Gelatin with Dichromate (DCG) and dyes have been used. We describe some characteristics and applications of these two photosensitive materials. We also describe examples where gelatin is used as a Relative Humidity (RH) sensor and in the fabrication of optical elements based on gelatin. This article is intended for researchers outside the optics community.

Colloid-polymer mixtures under slit confinement.

We report a NVT molecular dynamic study of colloid-polymer mixtures under slit confinement. For this purpose, we are employing the Asakura-Oosawa model for studying colloidal particles, polymer coils, and hard walls as the external confining field. The colloid-polymer size ratio, q, is varied in the range 1⩾q⩾0.4 and the confinement distance, H, in 10σc⩾H⩾3σc, σc being the colloidal diameter. Vapor-liquid coexistence properties are assessed, from which phase diagrams are built. The obtained data fulfill the corresponding states law for a constant H when q is varied. The shift of the polymer and colloidal chemical potentials of coexistence follows a linear relationship with (H-σc)-1 for H≳4σc. The confined vapor-liquid interfaces can be fitted with a semicircular line of curvature (H-σc)-1, from which the contact angle can be obtained. We observe complete wetting of the confining walls for reservoir polymer concentrations above and close to the critical value, and partial wetting for reservoir polymer concentrations above and far from it.

A Wavefront Division Polarimeter for the Measurements of Solute Concentrations in Solutions.

Polarimeters are useful instruments that measure concentrations of optically active substances in a given solution. The conventional polarimetric principle consists of measuring the rotation angle of linearly polarized light. Here, we present a novel polarimeter based on the study of interference patterns. A Mach-Zehnder interferometer with linearly polarized light at the input is used. One beam passes through the liquid sample and the other is a reference beam. As the linearly polarized sample beam propagates through the optically active solution the vibration plane of the electric field will rotate. As a result, the visibility of the interference pattern at the interferometer output will decrease. Fringe contrast will be maximum when both beams present a polarization perpendicular to the plane of incidence. However, minimum visibility is obtained when, after propagation through the sample the polarization of the sample beam is oriented parallel to the plane of incidence. By using different solute concentrations, a calibration plot is obtained showing the behavior of visibility.