Facile Synthesis of Functionalised Hyperbranched Polymers for Application as Novel, Low Viscosity Lubricant Formulation Components.

A novel, previously unreported, method for synthesising hyperbranched (HB) materials is detailed. Their use as additives to produce lubricant formulations that exhibit enhanced levels of wear protection and improved low-temperature oil viscosity and flow is also reported. The lubricant formulations containing HB additives were found to exhibit both significantly lower viscosities and improved in-use film-forming properties than the current industry standard formulations. To achieve this, alkyl methacrylate oligomers (predominantly dimers and trimers) were synthesised using catalytic chain transfer polymerisation. These were then used as functional chain transfer agents (CTA) to control the polymerisation of divinyl benzene (DVB) monomers to generate highly soluble, high polydispersity HB polymers. The level of dimer/trimer purification applied was varied to define its influence on both these HB resultant structures and the resultant HB additives' performance as a lubricant additive. It was shown that, while the DVB acted as the backbone of the HB, the base oil solubility of the additive was imparted by the presence of the alkyl chains included in the structure via the use of the oligomeric CTAs.

Adsorption of 4-n-Nonylphenol, Carvacrol, and Ethanol onto Iron Oxide from Nonaqueous Hydrocarbon Solvents.

The adsorption of 4-n-nonylphenol (4NP), carvacrol, and ethanol onto the surface of iron oxide from nonaqueous solutions is presented. It is found that adsorption of 4NP from alkanes is strong and proceeds to monolayer formation, where the molecules are essentially "upright". However, at high relative concentrations, ethanol successfully out-competes 4NP for the iron oxide surface. Estimates of the enthalpy and entropy of binding of 4NP were found to be exothermic and entropically disfavored. Sum frequency generation vibrational spectroscopy data indicate some evidence of binding through a phenolate anion, despite the nonpolar, nonaqueous solvent. Carvacrol is also found to adsorb as a monolayer where the molecules are lying "flat". The adsorption of ethanol onto iron oxide from dodecane was investigated through the use of quantitative NMR, which is a convenient analytical technique for measuring adsorption isotherms. It was concluded that ethanol does not form adsorbed monolayers on the surface. Instead, it partitions onto the surface as a surface-enhanced local phase separation related to its poor solubility in alkane solvents.

Competitive Adsorption of a Multifunctional Amine and Phenol Surfactant with Ethanol on Hematite from Nonaqueous Solution.

Surfactants, which contain phenol and amine groups, are commonly used in industries to protect metallic surfaces, and their efficiency depends strongly on factors such as pressure and temperature, solvent properties, and the presence of other surfactants in the system. In this work, we present a molecular simulation study of the competitive adsorption between a multifunctional phenol and amine surfactant model and ethanol at the oil/solid interface formed between iso-octane and a model hematite (α-Fe2O3) slab. We show that the surfactant strongly adsorbs at the iso-octane/hematite interface in the absence of ethanol at moderate temperatures. As the concentration of ethanol is increased, the ethanol molecules compete effectively for the adsorption sites on the iron oxide surface. This competition drives the surfactant molecules to remain in the bulk solution, while ethanol forms ordered and strongly coordinated layers at the oil/solid interface, despite the well-known complete miscibility of ethanol in iso-octane in bulk under standard conditions. Potential of mean force calculations show that the free energy of adsorption of the surfactant is approximately two times larger than that for a single ethanol molecule, but the simulations also reveal that a single surfactant chain needs to displace up to five ethanol molecules to adsorb onto the surface. The end result is more favorable ethanol adsorption which agrees with the experimental analysis of similar oil/iron oxide systems also reported in this work.

Modeling study of the anti-knock tendency of substituted phenols as additives: an application of the reaction mechanism generator (RMG).

This work presents kinetic modeling efforts to evaluate the anti-knock tendency of several substituted phenols if used as gasoline additives. They are p-cresol, m-cresol, o-cresol, 2,4-xylenol, 2-ethylphenol, and guaiacol. A detailed kinetic model was constructed to predict the ignition of blends of the phenols in n-butane with the help of reaction mechanism generator (RMG), an open-source software package. The resulting model, which has 1465 species and 27 428 reactions, was validated against literature n-butane ignition data in the low-to-intermediate temperature range. To rank the anti-knock tendency of the additives, engine-like simulations were performed in a closed adiabatic homogenous batch reactor with a volume history derived from the pressure profile of a real research octane number (RON) engine test. The ignition timings of the additive blends were compared to that of primary reference fuels (PRFs) to quantitatively predict the anti-knock ability. The model predictions agree well with experimental determinations of the changes in RON induced by the additives. This study explains the chemical mechanism by which methyl-substituted phenols increase RON, and demonstrates how fundamental chemical kinetics can be used to evaluate practical fuel additive performance.

Aromatic donor-acceptor interactions in non-polar environments.

We have evaluated the strength of aromatic donor-acceptor interactions between dialkyl naphthalenediimide and dialkoxynaphthalene in non-polar environments. (1)H NMR, UV-vis spectroscopy and isothermal titration calorimetry were used to characterise this interaction. We concluded that the strength of donor-acceptor interactions in heptane is sufficient to drive supramolecular assemblies in this and other aliphatic solvents.

Pressure-induced conformation transition of o-phenylene solvated in bulk hydrocarbons.

The conformational behavior of o-phenylene 8-mers and 10-mers solvated in a series of linear alkane solvents by means of classical molecular dynamics and first-principles calculations was studied. Irrespective of the solvent used, we find that at ambient pressure the molecule sits in the well-defined close-helical arrangement previously observed in light polar solvents. However, for pressures greater than 50 atm, and for tetradecane or larger solvent molecules, our simulations predict that o-phenylene undergoes a conformational transition to an uncoiled, extended geometry with a 35% longer head-to-tail distance and a much larger overlap between its lateral aromatic ring groups. The free energy barrier for the transition was studied as a function of pressure and temperature for both solute molecules in butane and hexadecane. Gas-phase density functional theory-based nudged elastic band calculations on 8-mer and 10-mer o-phenylene were used to estimate how the pressure-induced transition energy barrier changes with solute length. Our results indicate that a sufficiently large solvent molecule size is the key factor enabling a configuration transition upon pressure changes and that longer solute molecules associate with higher conformation transition energy barriers. This suggests the possibility of designing systems in which a solute molecule can be selectively "activated" by a controlled conformation transition achieved at a predefined set of pressure and temperature conditions.

A contribution to the nomenclature of depsipeptides.

Depsipeptides, also called peptolides, are a class of peptidic compounds in which an amide bond has been replaced with an ester bond. The literature does not clearly display rules for the nomenclature of such compounds. Here a method is proposed to transcribe drawn depsipeptide structures in one-line text.