RESUMO
This work is the first one that provides not only evidence for the existence of free volumes in the human stratum corneum but also focuses on comparing these experimental data, obtained through the unique positron annihilation lifetime spectroscopy (PALS) method, with theoretical values published in earlier works. The mean free volume of 0.269 nm was slightly lower than the theoretical value of 0.4 nm. The lifetime τ3 (1.83 ns with a coefficient of variation CV of 3.21%) is dependent on the size of open sites in the skin. This information was used to calculate the free volume radius R (0.269 nm with CV 2.14%), free volume size Vf (0.081 nm3 with CV 4.69%), and the intensity I3 (9.01% with CV 10.94%) to estimate the relative fractional free volume fv (1.32 a.u. with CV 13.68%) in human skin ex vivo. The relation between the lifetime of o-Ps (τ3) and the radius of free volume (R) was formulated using the Tao-Eldrup model, which assumes spherical voids and applies to sites with radii smaller than 1 nm. The results indicate that PALS is a powerful tool for confirming the existence of free volumes and determining their size. The studies also focused on describing the probable locations of these nanospaces in SC lipid bilayers. According to the theory, these play an essential role in dynamic processes in biological systems, including the diffusion of low-molecular-weight hydrophobic and moderately hydrophilic molecules. The mechanism of their formation has been determined by the molecular dynamics of the lipid chains.
Assuntos
Epiderme , Bicamadas Lipídicas , Análise Espectral , Humanos , Bicamadas Lipídicas/química , Bicamadas Lipídicas/metabolismo , Análise Espectral/métodos , Epiderme/metabolismo , Epiderme/química , Pele/metabolismo , Pele/químicaRESUMO
Calcification is a well-known process of calcium phosphate mineralization observed in intraocular lenses. Despite the many works conducted in this field, there is no strict explanation of the mechanisms of this process. In order to better understand the phenomenon, i.e., the mechanisms and structural conditions that promote calcification, any research observations should be conducted under conditions that best reflect those of the human eye. Taking into account the specific anatomy and physicochemical conditions of the human eye, the problem under discussion becomes difficult to solve in vitro. In the present study, calcium phosphates formed under conditions similar to those in the human eye were characterized using SEM/EDS and infrared spectroscopy. Conducted study showed the formation of white spherical precipitates, which are unstable when extracted from solution. Such precipitates were characteristic of solutions containing 1.5-3.0 mM2 of solutes. Elemental analysis showed a Ca/P ratio of 1.64-1.65, which is similar to the ratio for hydroxyapatite (1.67). Chemical structure analysis revealed the presence of broad bending and stretching bands at 475-830 cm-1 and 880-1250 cm-1, respectively, which are characteristic of PO43- groups in apatite calcium phosphates. In further analysis involving numerical fitting the bands corresponding to apatitic PO43- and indicating the presence of calcium phosphates hydration were found. The results allow the selection of immersion media for further studies involving the incubation of hydrogel intraocular lenses.
Assuntos
Fosfatos de Cálcio , Durapatita , Humanos , Espectrofotometria Infravermelho , Soluções , Fosfatos/química , Cálcio/químicaRESUMO
In this article, we present research on the influence of erbium ions on the structure and magneto-optical properties of 70TeO2-5XO-10P2O5-10ZnO-5PbF2 (X = Pb, Bi, Ti) tellurite glass systems. Structural changes occurring in the glasses during doping with erbium ions were investigated using positron annihilation lifetime spectroscopy (PALS) and Raman spectroscopy. The X-ray diffraction (XRD) method was used to confirm the amorphous structure of the investigated samples. Based on the Faraday effect measurements and calculated values of Verdet constant, the magneto-optical properties of the glasses were determined.
Assuntos
Érbio , Chumbo , Érbio/química , Titânio , Análise Espectral Raman , ÍonsRESUMO
The aim of the present work was to investigate an influence of W addition on the phase constitution, microstructure and magnetic properties of the Pr9Fe65WxB26-x (where: x = 2, 4, 6, 8) alloy ribbons. Ribbons were obtained using the melt-spinning technique under low pressure of Ar. The as-cast samples were fully amorphous and revealed soft magnetic properties. These facts were confirmed by X-ray diffractometry, Mössbauer spectroscopy and magnetic measurements. Differential scanning calorimetry and differential thermal analysis allowed us to determine the thermal stability parameters of the amorphous phase. The Kissinger plots were constructed in order to calculate the activation energies for crystallization. Heat treatment carried out at various temperatures caused changes in the phase constitution and magnetic properties of the alloys. The phase analysis has shown the presence of the hard magnetic Pr2Fe14B and paramagnetic Pr1+xFe4B4 phases. Additionally, for the x = 2 and x = 6 alloys, a crystallization of soft magnetic Fe2B and α-Fe phases was observed. The Mössbauer spectroscopy allowed us to determine the volume fractions of constituent phases formed during annealing. The microstructure of annealed ribbons was observed using transmission electron microscopy.
RESUMO
BACKGROUND: The effects of external factors such as X-ray irradiation on the structure and physical properties of contact lenses are very important for both the patients using contact lenses and medical personnel. OBJECTIVES: The aim of the study was to investigate the effect of X-rays on the structure of Narafilcon A silicone-hydrogel contact lenses. MATERIAL AND METHODS: In order to study the structural changes caused by X-rays in Narafilcon A polymer contact lenses, the following spectroscopy methods were used: positron annihilation lifetime spectroscopy (PALS), Fourier transform middle infrared spectroscopy (FTIR) and Raman spectroscopy (RS). Irradiation of the investigated sample was carried out using an Elekta Synergy accelerator. The contact lenses were irradiated with the following total doses of X-rays: 0.05 Gy, 0.5 Gy, 0.8 Gy, and 1.0 Gy. RESULTS: The PALS measurements showed that X-ray irradiation caused slight changes in the size of the free volume and the fractional free volume in the structure of the polymer contact lenses examined. However, the FTIR and RS measurements showed that X-rays did not break the monomer bonds in the polymeric structure of the sample. CONCLUSIONS: The changes revealed by the PALS method may be related to possible displacement of monomer chains, resulting in changes in the dimensions and numbers of free volumes. The finding that X-ray radiation does not affect or damage polymer bonds can in the future contribute to the use of X-ray and gamma radiation to sterilize contact lenses.
Assuntos
Lentes de Contato Hidrofílicas , Lentes de Contato , Biopolímeros , Humanos , Teste de Materiais , Silicones , Raios XRESUMO
Silicone oil is the one of the artificial materials used in vitreoretinal surgery for retinal detachment treatment. Since the silicone oil is sometimes applied along with intraocular lens (IOL) implantation the direct influence of silicone oil on the artificial implant should be taken into account. Presented study was performed in order to determine the time-dependent impact of silicone oil on hydrogel based ophthalmic materials. Two kinds of IOLs based on hydroxyethyl 2-methacrylate (HEMA) hydrogel material were immersed in silicone oil based on linear poly(dimethylsiloxane) (PDMS). Incubation in oil medium was performed in 37°C for 1, 3 and 6months. After appropriate period of the incubation samples were examined by means of FTIR-ATR method as the technique of surface study as well as Positron Annihilation Lifetime Spectroscopy (PALS) as the method of internal structure investigation. Results obtained during the study revealed that silicone oil is not capable to penetrate the internal structure of investigated materials and its impact has come down to interaction with the samples surfaces only.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/química , Lentes Intraoculares , Óleos de Silicone/química , Espectroscopia de Infravermelho com Transformada de Fourier , Fatores de Tempo , VibraçãoRESUMO
One of the most important field of interest in respect to hydrogel materials is their capability to water storage. The problem mentioned above plays an important role regarding to diffusion of fluid media containing nanoparticles, what is very useful in biomedical applications, such as artificial polymeric implants, drug delivery systems or tissue engineering.In presented work, dehydration process in hydrogels used in ophthalmology as intraocular lenses was observed. Before measurements studied materials were immersed in deionized water and saline solution to obtain equilibrium swelling state. Studies of the dehydration process were carried out by use of gravimetric analysis, Fourier-Transform Infrared and Positron Annihilation Lifetime Spectroscopy. Obtained results revealed changes in hydrogen bonding structure and free volume holes induced by saline solution ingredients.
RESUMO
The Raman, MIR and UV-vis spectroscopy have been used to characterize Omafilcon A material constructing the one of the Proclear family contact lenses. The Omafilcon A is hydrogel material composed of 2-hydroxyethyl methacrylate (HEMA) and 2-methacryloyloxyethyl phosphorylcholine (PC) polymers crosslinked with ethyleneglycol dimethacrylate (EGDMA). Vibrational and electronic properties of the Omafilcon A material were also investigated by quantum chemical calculations. Experimentally obtained Raman, MIR and optical spectra were compared to the theoretical ones calculated applying RHF and DFT methodology. The quantum chemical calculations were performed for isolated monomers of lenses compounds as well as for their dimers and trimers to elucidate the effect of Omafilcon A polymerization and the role of an individual components.
Assuntos
Lentes de Contato , Modelos Moleculares , Fosforilcolina/química , Vibração , Conformação Molecular , Polímeros/química , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral RamanRESUMO
The effect of the polydimethylsiloxane (PDMS) based silicone oil, that is widely used in vitreoretinal surgery, on internal structures of the polymer intraocular lenses was investigated. The effect of PDMS was studied on the polymethyl methacrylate (PMMA) rigid lenses and poly(2-hydroxyethyl methacrylate) (PHEMA) flexible lenses. The research was carried out by means of the positron lifetime spectroscopy (PALS) as well as the infrared spectroscopy (FT-IR) and the Raman spectroscopy (RS). The studies involving the use of PALS and FT-IR methods have revealed that the PHEMA based lenses absorbed, whereas the PMMA lenses did not absorb, silicone oil. The results obtained with the use of the RS method were inconclusive, probably due to the too low intensity of the characteristic PDMS bands. The evidence from this study was discussed in terms of physics and related to the clinical use of both silicone oil and intraocular lenses.
RESUMO
BACKGROUND: Hydrogel and silicone-hydrogel polymeric materials are widely used in ophthalmology for the manufacture of contact lenses. An important aspect is the investigation of the structure of these materials. OBJECTIVES: This study has been conducted in order to compare the degree of disorder and presence of free volumes in the internal structure of the polymeric soft contact lenses Omafilcon A (hydrogel) and Comfilcon A (silicone-hydrogel). Differences in the occurrence of trapping centers for positrons and free volumes between the types of investigated contact lenses have been demonstrated. MATERIAL AND METHODS: Two types of polymeric contact lenses were used as materials: Omafilcon A (hydrogel) and Comfilcon A (silicone-hydrogel). The study was performed using positron annihilation lifetime spectroscopy (PALS). RESULTS: When the results of the measurements has been obtained, a graphical curve has created to describe the relationship of the number of annihilation acts in time. Significant changes were observed between the contact lenses investigated in positron trapping in macropores (based on a two-state model) and the presence of free volumes (based on the Tao-Eldrup model). CONCLUSIONS: The use of the positron annihilation two-state model made it possible to demonstrate that a higher positron trapping rate in macropores occurs in the silicone-hydrogel contact lens. Additionally, calculations using the Tao-Eldrup model show the existence of free volumes in both types of materials. The size and fraction of free volumes is much larger in the silicone-hydrogel contact lens.
Assuntos
Lentes de Contato Hidrofílicas , Hidrogéis/química , Silicones/química , Análise Espectral , Elétrons , Estrutura MolecularRESUMO
BACKGROUND: The polymeric materials: hydrogel, silicone--hydrogel and methacrylic acid are used in ophthalmology for the manufacture of contact lenses. It is important to research the structure of these materials, mainly the prevalence of free volumes. OBJECTIVES: The study has been conducted in order to comparison the presence of free volume gaps in the structure of the polymer soft contact lenses: Etafilcon A (hydrogel), Narafilcon A (silicone-hydrogel) and the polymer rigid gas permeable (RGP) contact lens (Fluor-Silicon-Methacrylat-Copolymer). In addition, to demonstrate differences in the occurrence of free volumes between types of represented contact lenses. MATERIAL AND METHODS: Three types of polymer contact lenses were used as materials: Etafilcon A, Narafilcon A and Fluor-Silicon-Methacrylat-Copolymer. The study was done by means of positron annihilation lifetime spectroscopy (PALS). RESULTS: As a result of the performed measurements, a graphical curve resulted which describes the relationship between the number of the annihilation acts in the time function. Significant changes were observed in the ortho-positronium long life component τ3 and their intensities between the examined polymer contact lenses. CONCLUSIONS: The conducted study using the Tao-Eldrup model indicates the presence of free volume holes in all research materials. There is a clear difference in the free volume sizes and their fractions between measured contact lenses are connected with oxygen permeability in these lenses. The results lead to the following connection: contact lenses of higher oxygen permeability coefficients and a water content of less, have more and larger free volumes than contact lenses of less oxygen permeability coefficient.
Assuntos
Lentes de Contato/classificação , Teste de Materiais , Modelos Químicos , Oxigênio/química , Lentes de Contato Hidrofílicas , Elétrons , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Metacrilatos , Permeabilidade , Polímeros/química , Silicones/químicaRESUMO
Methodological possibilities of positron annihilation lifetime (PAL) spectroscopy applied to characterize different types of nanomaterials treated within three-term fitting procedure are critically reconsidered. In contrast to conventional three-term analysis based on admixed positron- and positronium-trapping modes, the process of nanostructurization is considered as substitutional positron-positronium trapping within the same host matrix. Developed formalism allows estimate interfacial void volumes responsible for positron trapping and characteristic bulk positron lifetimes in nanoparticle-affected inhomogeneous media. This algorithm was well justified at the example of thermally induced nanostructurization occurring in 80GeSe2-20Ga2Se3 glass.
RESUMO
BACKGROUND: Polymer materials based on acrylic monomers are commonly used in dentistry. It is important to research the structure of dental filling materials towards the material ageing. OBJECTIVES: The study has been conducted in order to determine the presence of free volume gaps in the structure of polymer materials. MATERIAL AND METHODS: Brand new, acrylic polymer based samples of dental Dipol materials were used as a research material. The study was conducted by means of the positron annihilation lifetime spectroscopy (PALS). RESULTS: As a result of the conducted measurements, curves describing numbers of counts of the acts of annihilation in the time function were obtained. The conducted studies revealed the existence of four components τ1, τ2, τ3 and τ4. The τ3 and τ4 components are attributed to the pick-off annihilation of o-Ps orthopositronium trapping by free volume gaps and provide information about geometrical parameters of the volumes. LT 9 computer program was used to calculate components. Free volume holes were determined from empirical relationship between the radius of free volume and the long lifetime components. CONCLUSIONS: Conducted studies indicate the presence of free volume holes in the research materials. It has been noted that a new long lifetime component is assigned to a new kind of free volumes that exist in the structure of material related to the material ageing.
Assuntos
Resinas Acrílicas/química , Materiais Dentários/química , Teste de Materiais , Modelos Químicos , Estrutura Molecular , Análise Espectral/métodos , Fatores de TempoRESUMO
BACKGROUND: Polymer materials based on hydrogel and silicone-hydrogel materials are commonly used in ophthalmology. It is important to research the structure of these materials, mainly the prevalence of free volumes. OBJECTIVES: The study has been conducted in order to determine the presence of free volume gaps in the structure of polymer hydrogel and silicone-hydrogel contact lenses. In addition, to demonstrate differences in the occurrence of free volumes between types of represented contact lenses. MATERIAL AND METHODS: Three different hydrogel and three different silicone-hydrogel polymer contact lenses were used as research material. The study was done by means of positron annihilation lifetime spectroscopy (PALS). RESULTS: As a result of the performed measurements, a graphical curve resulted which describes the relationship between the number of the annihilation acts in the time function. The study revealed the existence of three τ1, τ2 and τ3 components. Significant changes were observed in the ortho-positronium long life component τ3 and their intensities between the examined polymer contact lenses. CONCLUSIONS: The conducted study using the Tao-Eldrup model indicates the presence of free volume holes in all research materials. The results lead to the following connection: contact lenses of higher oxygen permeability coefficient (silicone-hydrogel contact lenses) have more and larger free volumes than contact lenses of less oxygen permeability coefficient (hydrogel contact lenses).
Assuntos
Lentes de Contato Hidrofílicas , Hidrogel de Polietilenoglicol-Dimetacrilato/análise , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Teste de Materiais , Silicones/análise , Silicones/química , Modelos Químicos , Oxigênio/química , Permeabilidade , Polímeros/análise , Polímeros/química , Análise Espectral/métodosRESUMO
UNLABELLED: PURPOSE OF JOB: Currently, there isa need to increase comfort and visual acuity man. Simultaneously improving biocompatibility and minimizing the impact of the material on the physiology of the cornea is the primary driving force behind the evolution of materials used in the manufacture of contact lenses. Despite progressive development of modern materials science, there is still the problem of reducing the level of oxygen available to the cornea resulting in pathological changes in the cornea. Therefore, structural studies increases interesting in relating to the amorphous contact lenses polymeric materials. MATERIALS AND METHODS: The aim of this work is structural investigation of polymer hydrogel and silicone hydrogel contact lenses made in the technology of PC (Phosphoryl Choline). The study method was used positron lifetime spectroscopy PALS. RESULTS: As a result of the measurements obtained curve describing the dependence of the number of counts of acts of annihilation as a function of time. CONCLUSIONS: The study of PALS showed the existence of three components. Component tau1 is responsible for the annihilation of free positrons and the annihilation of electrons vacancy-type point defects. Component tau2 is associated with defects in the volume of grain boundaries formed, dislocations or clusters of vacancies. The results of calculations of mean values positron lifetime samples, showed longtime component tau3 in the spectrum of positron lifetime. Component tau3 is assigned to pick-off annihilation of ortho-positronium o-Ps trapping by free volume and providing information on the geometric parameters of the volume.
Assuntos
Materiais Biocompatíveis , Lentes de Contato , Hidrogel de Polietilenoglicol-Dimetacrilato , Teste de Materiais , Polímeros , Hidrogel de Polietilenoglicol-Dimetacrilato/análise , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Polímeros/química , Silicones/química , Análise Espectral , Proteínas tau/análise , Proteínas tau/químicaRESUMO
UNLABELLED: PURPOSE OF JOB: The evolution of materials used to manufacture contact lenses, there is a need to increase comfort and visual acuity man while improving biocompatibility and minimizing the impact of the material on the physiology of the cornea. There is still a problem with limiting the level of oxygen available to the cornea, resulting in various diseases. Therefore, the aim of this work is to investigate the physical and structural properties of hydrogel and silicone-hydrogel contact lenses. MATERIALS AND METHODS: To achieve the main objective, the project involves the complete, systematic and comprehensive research methodology, techniques of positron lifetime spectroscopy PAL associated with polymerization, nanovoid natural structure of modern polymeric materials used in ophthalmology. This method is particularly sensitive to detect the structure of disordered materials with structural defects. Therefore it is reasonable to use PAL spectroscopy in studies of polymer nanostructures change contact lenses used in ophthalmology. RESULTS: As a result of the measurements obtained curve describing the dependence of the number of counts of acts of annihilation as a function of time. Distribution of positron lifetime spectra into three components, allows to extract the longest third component which gives information about the geometrical parameters of free volume. Clear changes were observed long-living component lifetimes of ortho-positronium and their intensities between the lenses tested. CONCLUSIONS: The measurements allowed us to isolate and calculate the value of long-living tau3 and its intensity I3, which values are component of positron lifetime associated with the formation of ortho-positronium (o-Ps) and is a measure of the density distribution of free volume creation. The results of these measurements indicate that the formation of free volume holes takes place both in the hydrogel lens and silicone-hydrogel. However, the size of free volume and the amount of free volume occurring for silicone-hydrogel lenses are greater than for hydrogel lenses. The study nanovoid structure of polymeric materials, their size and number suggest a relationship with the oxygen permeability of contact lenses, which implies a continuation and extension of the initial research.
Assuntos
Materiais Biocompatíveis/química , Lentes de Contato , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Teste de Materiais , Silicones/química , Análise Espectral/métodos , Lentes de Contato Hidrofílicas , Elétrons/classificação , Modelos Moleculares , Nanoestruturas/química , Oxigênio/química , Permeabilidade , Polimerização , Polímeros/químicaRESUMO
Positron annihilation lifetime spectroscopy PALS has been applied of free volume properties in bifocal contact lenses. The measurements have been made on new lenses and then after one, two, three and four weeks wear. The longest lifetime, obtained via three-component analyses of the spectra, was associated with the pick-off annihilation of ortho-positronium trapped in the free volume. After wear of the lenses changes in the ortho-positronium lifetimes and the relative intensity of the longest component were observed. These results are discussed on the basis of a free volume model.
Assuntos
Lentes de Contato , Teste de Materiais , Polímeros/química , Elétrons , Desenho de Equipamento , Modelos Teóricos , Análise EspectralRESUMO
Positron annihilation lifetime spectroscopy has been applied of free volume properties in bifocal contact lenses. The measurements have been made on new lenses and then after one, and two weeks wearing by the patient. The longest lifetime, obtained via three-component analyses of the spectra, was associated with the pick-off annihilation of ortho-positronium trapped in the free volume. After one, and two weeks wearing of the lenses changes in the ortho-positronium lifetimes and the relative intensity of the longest component were observed. These results are discussed on the basis of a free volume model.