Dissolution of Molybdenum in Hydrogen Peroxide: A Thermodynamic, Kinetic and Microscopic Study of a Green Process for 99mTc Production.

99mTc-based radiopharmaceuticals are the most commonly used medical radioactive tracers in nuclear medicine for diagnostic imaging. Due to the expected global shortage of 99Mo, the parent radionuclide from which 99mTc is produced, new production methods should be developed. The SORGENTINA-RF (SRF) project aims at developing a prototypical medium-intensity D-T 14-MeV fusion neutron source specifically designed for production of medical radioisotopes with a focus on 99Mo. The scope of this work was to develop an efficient, cost-effective and green procedure for dissolution of solid molybdenum in hydrogen peroxide solutions compatible for 99mTc production via the SRF neutron source. The dissolution process was extensively studied for two different target geometries: pellets and powder. The first showed better characteristics and properties for the dissolution procedure, and up to 100 g of pellets were successfully dissolved in 250-280 min. The dissolution mechanism on the pellets was investigated by means of scanning electron microscopy and energy-dispersive X-ray spectroscopy. After the procedure, sodium molybdate crystals were characterized via X-ray diffraction, Raman and infrared spectroscopy and the high purity of the compound was established by means of inductively coupled plasma mass spectroscopy. The study confirmed the feasibility of the procedure for production of 99mTc in SRF as it is very cost-effective, with minimal consumption of peroxide and controlled low temperature.

Electrochromic evaluation of airbrushed water-dispersible W18O49nanorods obtained by microwave-assisted synthesis.

Motivated by the technological relevance of tungsten oxide nanostructures as valuable materials for energy saving technology, electrochemical and electrochromic characteristics of greener processed nanostructured W18O49-based electrodes are discussed in this work. For the purpose, microwave-assisted water-dispersible W18O49nanorods have been synthesized and processed into nanostructured electrodes. An airbrushing technique has been adopted as a cost-effective large-area scalable methodology to deposit the W18O49nanorods onto conductive glass. This approach preserves the morphological and crystallographic habit of native nanorods and allows highly homogeneous transparent coating where good electronic coupling between nanowires is ensured by a mild thermal treatment (250 °C, 30 min). Morphological and structural characteristics of active material were investigated from the synthesis to the nanocrystal deposition process by transmission and scanning electron microscopy, x-ray diffraction, atomic force microscopy and Raman spectroscopy. The as-obtained nanostructured film exhibited good reversible electrochemical features through several intercalation-deintercalation cycles. The electrochromic properties were evaluated on the basis of spectro-electrochemical measurements and showed significant optical contrast in the near-infrared region and high coloration efficiency at 550 nm.

Food Cleaning by Japanese Macaques: Innate, Innovative or Cultural?

Japanese macaques (Macaca fuscata) display a number of cultural behaviours including food washing, stone handling and certain grooming techniques. These are deemed cultural behaviours because it is presumed that they are socially learned and, importantly, that social learning is essential for their emergence. Recently, however, research has revealed that culturally naïve primates can re-innovate presumed cultural behaviours. These behaviours are said to fall within that species' "zone of latent solutions" (ZLS). A notable cultural behaviour of Japanese macaques is food washing, first reported by Japanese researchers studying wild Japanese macaques in the 1950s. To test whether culturally naïve Japanese macaques would spontaneously wash food and also, therefore, whether food-washing behaviour is within their ZLS, we presented 12 zoo-housed macaques with sweet potato covered in sand near a pool in their exhibit. Over 11 days we recorded the macaques' behaviour. While 11 of the 12 macaques ate the potato pieces, none washed them. However, 4 macaques cleaned their food, brushing off the sand using their hand or rubbing the potato against their body or another food item, using three distinct techniques. We found no change over time in the rate at which monkeys cleaned or consumed potato, but there was a significant positive correlation between the number of potato pieces a monkey ate and the number of cleaning behaviours performed. We conclude that, minimally, food-cleaning behaviour is within macaques' ZLS.

The dynamic surface chemistry of colloidal metal chalcogenide quantum dots.

The chemical species (ligands) at the surface of colloidal inorganic semiconductor nanocrystals (QDs) mediate their interactions with the surroundings. The solvation of the QDs reflects a subtle interplay between ligand-solvent and ligand-ligand interactions, which eventually compete with the coordination of the ligands at the QD surface. The QD surface coordination and solvation are indeed fundamental to preserve their optoelectronic properties and to foster the effective application of QD-based inks and nanocomposites. Here we investigate such ligand interactions by exploiting diffusion ordered NMR spectroscopy (DOSY), which is suggested as an essential complement to spectral line width analysis. To this end, we use colloidal metal chalcogenide (CdS, CdSe, and PbS) QDs with (metal-)oleate ligands at their surface in several solvents exhibiting different viscosities and polarities. We demonstrate that the ligand shell is dynamically bound to the metal chalcogenide QDs, and is thus in equilibrium between the QD surface and the surrounding solvent. Such dynamic equilibria depend on ligand-solvent interactions, which are more prominent in aliphatic, rather polar solvents that favor the solvation of the ligands and, as a consequence, their displacement from the QD surface. In addition, the ligand-ligand interactions, which are more relevant for larger QDs, contribute to the stabilization of the ligand bonding at the QD surface.

Simplified preparation and characterization of magnetic hydroxyapatite-based nanocomposites.

Authors aimed to provide a magnetic responsiveness to bone-mimicking nano-hydroxyapatite (n-HA). For this purpose, dextran-grafted iron oxide nanoarchitectures (DM) were synthesized by a green-friendly and scalable alkaline co-precipitation method at room temperature and used to functionalize n-HA crystals. Different amounts of DM hybrid structures were added into the nanocomposites (DM/n-HA 1:1, 2:1 and 3:1weight ratio) which were investigated through extensive physicochemical (XRD, ICP, TGA and Zeta-potential), microstructural (TEM and DLS), magnetic (VSM) and biological analyses (MTT proliferation assay). X-ray diffraction patterns have confirmed the n-HA formation in the presence of DM as a co-reagent. Furthermore, the addition of DM during the synthesis does not affect the primary crystallite domains of DM/n-HA nanocomposites. DM/n-HAs have shown a rising of the magnetic moment values by increasing DM content up to 2:1 ratio. However, the magnetic moment value recorded in the DM/n-HA 3:1 do not further increase showing a saturation behaviour. The cytocompatibility of the DM/n-HA was evaluated with respect to the MG63 osteoblast-like cell line. Proliferation assays revealed that viability, carried out in the absence of external magnetic field, was not affected by the amount of DM employed. Interestingly, assays also suggested that the DM/n-HA nanocomposites exhibit a possible shielding effect with respect to the anti-proliferative activity induced by the DM particles alone.

Quenching dynamics in CdSe nanoparticles: surface-induced defects upon dilution.

We have analyzed the decays of the fluorescence of colloidal CdSe quantum dots (QDs) suspensions during dilution and titration by the ligands. A ligand shell made of a combination of trioctylphosphine (TOP), oleylamine (OA), and stearic acid (SA) stabilizes the as-synthesized QDs. The composition of the shell was analyzed and quantified using high resolution liquid state 1H nuclear magnetic resonance (NMR) spectroscopy. A quenching of the fluorescence of the QDs is observed upon removal of the ligands by diluting the stock solution of the QDs. The fluorescence is restored by the addition of TOP. We analyze the results by assuming a binomial distribution of quenchers among the QDs and predict a linear trend in the time-resolved fluorescence decays. We have used a nonparametric analysis to show that for our QDs, 3.0 ± 0.1 quenching sites per QD on average are revealed by the removal of TOP. We moreover show that the quenching rates of the quenching sites add up. The decay per quenching site can be compared with the decay at saturation of the dilution effect. This provides a value of 2.88 ± 0.02 for the number of quenchers per QD. We extract the quenching dynamics of one site. It appears to be a process with a distribution of rates that does not involve the ligands.

Photoconduction properties in aligned assemblies of colloidal CdSe/CdS nanorods.

We report on photoconduction and optical properties of aligned assemblies of core-shell CdSe/CdS nanorods prepared by a seeded growth approach. We fabricate oriented layers of nanorods by drop casting the nanorods from a solution on substrates with prepatterned, micrometer-spaced electrodes and obtain nanorod alignment due to the coffee stain effect. The photoconductivity of the nanorod layers can be improved significantly by an annealing process under vacuum conditions. The spectral response of the photocurrent shows distinct features that can be assigned to the electronic level structure of the core-shell nanorods and that relate well to the spectra obtained by absorption measurements. We study assemblies of nanorods oriented parallel and perpendicular to the applied electric field by the combined use of photocurrent and photoluminescence spectroscopy. We obtain consistent results which show that charge carrier separation and transport are more efficient for nanorods oriented parallel to the electric field. We also investigate the light polarization sensitivity of the photocurrent for the oriented nanorod layers and observe higher conductivity in the case of perpendicular polarization with respect to the long axis of the nanorods.

Assembly of colloidal semiconductor nanorods in solution by depletion attraction.

Arranging anisotropic nanoparticles into ordered assemblies remains a challenging quest requiring innovative and ingenuous approaches. The variety of interactions present in colloidal solutions of nonspherical inorganic nanocrystals can be exploited for this purpose. By tuning depletion attraction forces between hydrophobic colloidal nanorods of semiconductors, dispersed in an organic solvent, these could be assembled into 2D monolayers of close-packed hexagonally ordered arrays directly in solution. Once formed, these layers could be fished onto a substrate, and sheets of vertically standing rods were fabricated, with no additional external bias applied. Alternatively, the assemblies could be isolated and redispersed in polar solvents, yielding suspensions of micrometer-sized sheets which could be chemically treated directly in solution. Depletion attraction forces were also effective in the shape-selective separation of nanorods from binary mixtures of rods and spheres. The reported procedures have the potential to enable powerful and cost-effective fabrication approaches to materials and devices based on self-organized anisotropic nanoparticles.

Fabrication and spectroscopic studies on highly luminescent CdSe/CdS nanorod polymer composites.

Highly luminescent nanocomposites were prepared by incorporating CdSe/CdS core/shell nanorods into different polymer matrices. The resulting nanocomposites show high transparency of up to 93%. A photoluminescence quantum efficiency of 70% was obtained, with an optimum combination of nanorod (0.05 wt %) and at a UV-initiator concentration of 0.1 wt % for poly(lauryl methacrylate). Nanorods tend to agglomerate in cellulose triacetate.

Polarized light emitting diode by long-range nanorod self-assembling on a water surface.

We demonstrate a straightforward strategy to fabricate a multilayer inorganic/organic polarized light-emitting diode device based on highly ordered arrays of rod-shaped nanocrystals as the active species. We have developed a simple and effective method that allows colloidal CdSe/CdS core/shell nanorods to be laterally aligned in smectic or nematic phases on the surface of water. A floating film of such ordered nanorods has been collected by a poly(dimethylsiloxane) (PDMS) stamp pad and transferred by contact printing onto previously evaporated organic layers. Thanks to the lateral nanorod alignment the as-prepared film exhibited strong polarized photoluminescence and it has been used as emissive layer in the polarized electroluminescent device.

Tetrapod-shaped colloidal nanocrystals of II-VI semiconductors prepared by seeded growth.

We report a general synthetic approach to tetrapod-shaped colloidal nanocrystals made of various combinations of II-VI semiconductors. Uniform tetrapods were prepared using preformed seeds in the sphalerite structure, onto which arms were grown by coinjection of the seeds and chemical precursors into a hot mixture of surfactants. By this approach, a wide variety of core materials could be chosen (in practice, most of the II-VI semiconductors that could be prepared in the sphalerite phase, namely, CdSe, ZnTe, CdTe); in contrast, the best materials for arm growth were CdS and CdTe. The samples were extensively characterized with the aid of several techniques.

Self-assembly of highly fluorescent semiconductor nanorods into large scale smectic liquid crystal structures by coffee stain evaporation dynamics.

We deposit droplets of nanorods dispersed in solvents on substrate surfaces and let the solvent evaporate. We find that strong contact line pinning leads to dense nanorod deposition inside coffee stain fringes, where we observe large scale lateral ordering of the nanorods with the long axis of the rods oriented parallel to the contact line. We observe birefringence of these coffee stain fringes by polarized microscopy and we find the direction of the extraordinary refractive index parallel to the long axis of the nanorods.

One-pot synthesis and characterization of size-controlled bimagnetic FePt-iron oxide heterodimer nanocrystals.

A one-pot, two-step colloidal strategy to prepare bimagnetic hybrid nanocrystals (HNCs), comprising size-tuned fcc FePt and inverse spinel cubic iron oxide domains epitaxially arranged in a heterodimer configuration, is described. The HNCs have been synthesized in a unique surfactant environment by temperature-driven sequential reactions, involving the homogeneous nucleation of FePt seeds and the subsequent heterogeneous growth of iron oxide. This self-regulated mechanism offers high versatility in the control of the geometric features of the resulting heterostructures, circumventing the use of more elaborate seeded growth techniques. It has been found that, as a consequence of the exchange coupling between the two materials, the HNCs exhibit tunable single-phase-like magnetic behavior, distinct from that of their individual components. In addition, the potential of the heterodimers as effective contrast agents for magnetic resonance imaging techniques has been examined.

Ultrafast electron-hole dynamics in core/shell CdSe/CdS dot/rod nanocrystals.

We investigated the transient bleaching and absorption of the asymmetric core/shell CdSe/CdS nanorods using the pump-probe technique. We observed ultrafast carrier relaxation and identified hole localization dynamics with 650 +/- 80 fs time constant. Upon pumping the CdSe core, we found an intense bleaching signal in the CdS spectral region, which we assigned to the delocalization of the electronic wave function on the basis of envelope-function theoretical calculations.

Synthesis and micrometer-scale assembly of colloidal CdSe/CdS nanorods prepared by a seeded growth approach.

Key limitations of the colloidal semiconductor nanorods that have been reported so far are a significant distribution of lengths and diameters as well as the presence of irregular shapes produced by the current synthetic routes and, finally, the poor ability to fabricate large areas of oriented nanorod arrays. Here, we report a seeded-growth approach to the synthesis of asymmetric core-shell CdSe/CdS nanorods with regular shapes and narrow distributions of rod diameters and lengths, the latter being easily tunable up to 150 nm. These rods are highly fluorescent and show linearly polarized emission, whereby the emission energy depends mainly on the core diameter. We demonstrate their lateral alignment as well as their vertical self-alignment on substrates up to areas of several square micrometers.

Heterodimers based on CoPt3-Au nanocrystals with tunable domain size.

We describe an approach to synthesize colloidal nanocrystal heterodimers composed of CoPt(3) and Au. The growth is based on the nucleation of gold domains on preformed CoPt(3) nanocrystals. It is a highly versatile methodology which allows us to tune independently the size of the two domains in each dimer by varying several reaction parameters. The statistical analysis of the distribution of the domain sizes in the dimers and the compositional mapping achieved by dark field imaging and energy dispersive spectroscopy confirm that the two domains in each dimer are indeed made of CoPt(3) and Au, respectively. Structural characterization by high-resolution transmission electron microscopy shows that the two domains, both having cubic fcc Bravais lattice, can share a common {111}, {100}, or {110} facet, depending on the size of the initial CoPt(3) seeds. The magnetization measurements evidence a ferromagnetic CoPt(3) phase with a relatively low anisotropy as a consequence of their disordered crystalline structure, regardless of the presence of a Au tip. We believe that this prototype of nanocrystal dimer, which can be manipulated under air, can find several applications in nanoscience, as the Au section can be exploited as the preferential anchor point for various molecules, while the CoPt(3) domain can be used for magnetic detection.