Schiff Base-Based Hydrogel Embedded with In Situ Generated Silver Nanoparticles Capped by a Hyaluronic Acid-Diethylenetriamine Derivative for Wound Healing Application.

In this study, hydrogels were produced using a Schiff base reaction between two hyaluronic acid derivatives: one containing aldehyde groups (HA-Ald) and the other holding a diethylenetriamine with terminal amino groups (HA-DETA). The DETA portion promotes the in situ growth, complexation, and stabilization of silver nanoparticles (AgNPs), eliminating the need for external reducing agents. The reaction between HA-DETA and HA-Ald leads to the formation of imine bonds, which results in dynamically pH-responsive cross-linking. While the DETA capping ability helped in embedding the AgNPs, the on/off pH environmental responsivity of the hydrogel allows for a controlled and on-demand release of the drug, mainly when bacterial infections cause pH variation of the wound bed. The injectable hydrogels resulted in being highly compatible in contact with blood red cells, fibroblasts, and keratinocytes and capable of having a proliferative effect on an in vitro wound scratch model. The pH-responsive hydrogels showed proper antibacterial activity againstPseudomonas aeruginosaandStaphylococcus aureus, common bacterial strains presented in wound infections. Finally, in vivo wound model studies demonstrated an overall speeding up in the wound healing rate and advanced wound conditions in the experimental group treated with the hydrogels compared to control samples.

Modulating the release of bioactive molecules of human mesenchymal stromal cell secretome: Heparinization of hyaluronic acid-based hydrogels.

An amine derivative of hyaluronic acid (HA) was crosslinked to obtain a 3D dried sponge. The sponge was subsequently rehydrated using secretome from human mesenchymal stromal cells (MSCs), resulting in the formation of a hydrogel. The release kinetics analysis demonstrated that the hydrogel effectively sustained secretome release, with 70% of the initially loaded wound-healing-associated cytokines being released over a 12-day period. Tuning the hydrogel properties through heparin crosslinking resulted in a biomaterial with a distinct mechanism of action. Specifically, the presence of heparin enhanced water uptake capacity of the hydrogel and increased its sensitivity to enzymatic degradation. Notably, the heparin crosslinking also led to a significant retention of cytokines within the hydrogel matrix. Overall, the secretome-rehydrated HA hydrogel holds promise as a versatile device for regenerative medicine applications: the non-heparinized hydrogel may function as a biomaterial with low reabsorption rates, sustaining the release of bioactive molecules contained in MSC secretome. In contrast, the heparinized hydrogel may serve as a depot of bioactive molecules with faster reabsorption rates. Given its patch-like characteristic, the HA-based hydrogel appears suitable as topical treatment for external organs, such as the skin.

Gellan gum-dopamine mediated in situ synthesis of silver nanoparticles and development of nano/micro-composite injectable hydrogel with antimicrobial activity.

Infected skin wounds represent a serious health threat due to the long healing process and the risk of colonization by multi-drug-resistant bacteria. Silver nanoparticles (AgNPs) have shown broad-spectrum antimicrobial activity. This study introduces a novel approach to address the challenge of infected skin wounds by employing gellan gum-dopamine (GG-DA) as a dual-functional agent, serving both as a reducing and capping agent, for the in situ green synthesis of silver nanoparticles. Unlike previous methods, this work utilizes a spray-drying technique to convert the dispersion of GG-DA and AgNPs into microparticles, resulting in nano-into-micro systems (AgNPs@MPs). The microparticles, with an average size of approximately 3 µm, embed AgNPs with a 13 nm average diameter. Furthermore, the study explores the antibacterial efficacy of these AgNPs@MPs directly and in combination with other materials against gram-positive and gram-negative bacteria. The versatility of the antimicrobial material is showcased by incorporating the microparticles into injectable hydrogels. These hydrogels, based on oxidized Xanthan Gum (XGox) and a hyperbranched synthetic polymer (HB10K-G5-alanine), are designed with injectability and self-healing properties through Shiff base formation. The resulting nano-into-micro-into-macro hybrid hydrogel emerges as a promising biomedical solution, highlighting the multifaceted potential of this innovative approach in wound care and infection management.

Antibacterial Broad-Spectrum Dendritic/Gellan Gum Hybrid Hydrogels with Rapid Shape-Forming and Self-Healing for Wound Healing Application.

Treating wound infections is a difficult task ever since pathogenic bacteria started to develop resistance to common antibiotics. The present study develops hybrid hydrogels based on the formation of a polyelectrolyte complex between the anionic charges of dopamine-functionalized Gellan Gum (GG-DA) and the cationic moieties of the TMP-G2-alanine dendrimer. The hydrogels thus obtained can be doubly crosslinked with CaCl2 , obtaining solid hydrogels. Or, by oxidizing dopamine to GG-DA, possibly causing further interactions such as Schiff Base and Michael addition to take place, hydrogels called injectables can be obtained. The latter have shear-thinning and self-healing properties (efficiency up to 100%). Human dermal fibroblasts (HDF), human epidermal keratinocytes (HaCaT), and mouse monocyte cells (RAW 264.7), after incubation with hydrogels, in most cases show cell viability up to 100%. Hydrogels exhibit adhesive behavior on various substrates, including porcine skin. At the same time, the dendrimer serves to crosslink the hydrogels and endows them with excellent broad-spectrum microbial eradication activity within four hours, evaluated using Staphylococcus aureus 2569 and Escherichia coli 178. Using the same GG-DA/TMP-G2-alanine ratios hybrid hydrogels with tunable properties and potential for wound dressing applications can be produced.

A Novel Peptide with Antifungal Activity from Red Swamp Crayfish Procambarus clarkii.

The defense system of freshwater crayfish Procambarus clarkii as a diversified source of bioactive molecules with antimicrobial properties was studied. Antimicrobial activity of two polypeptide-enriched extracts obtained from hemocytes and hemolymph of P. clarkii were assessed against Gram positive (Staphylococcus aureus, Enterococcus faecalis) and Gram negative (Pseudomonas aeruginosa, Escherichia coli) bacteria and toward the yeast Candida albicans. The two peptide fractions showed interesting MIC values (ranging from 11 to 700 µg/mL) against all tested pathogens. Polypeptide-enriched extracts were further investigated using a high-resolution mass spectrometry and database search and 14 novel peptides were identified. Some peptides and their derivatives were chemically synthesized and tested in vitro against the bacterial and yeast pathogens. The analysis identified a synthetic derivative peptide, which showed an interesting antifungal (MIC and MFC equal to 31.2 µg/mL and 62.5 µg/mL, respectively) and antibiofilm (BIC50 equal to 23.2 µg/mL) activities against Candida albicans and a low toxicity in human cells.

Developing Antibiofilm Fibrillar Scaffold with Intrinsic Capacity to Produce Silver Nanoparticles.

The development of biomedical systems with antimicrobial and antibiofilm properties is a difficult medical task for preventing bacterial adhesion and growth on implanted devices. In this work, a fibrillar scaffold was produced by electrospinning a polymeric organic dispersion of polylactic acid (PLA) and poly(α,ß-(N-(3,4-dihydroxyphenethyl)-L-aspartamide-co-α,ß-N-(2-hydroxyethyl)-L-aspartamide) (PDAEA). The pendant catechol groups of PDAEA were used to reduce silver ions in situ and produce silver nanoparticles onto the surface of the electrospun fibers through a simple and reproducible procedure. The morphological and physicochemical characterization of the obtained scaffolds were studied and compared with virgin PLA electrospun sample. Antibiofilm properties against Pseudomonas aeruginosa, used as a biofilm-forming pathogen model, were also studied on planar and tubular scaffolds. These last were fabricated as a proof of concept to demonstrate the possibility to obtain antimicrobial devices with different shape and dimension potentially useful for different biomedical applications. The results suggest a promising approach for the development of antimicrobial and antibiofilm scaffolds.

Near-infrared light-responsive and antibacterial injectable hydrogels with antioxidant activity based on a Dopamine-functionalized Gellan Gum for wound healing.

The development of wound dressings with combined antioxidant, antibacterial and tissue adhesion functions has been a difficult medical task for the treatment of wound infections. We synthetized a dopamine and PEG functionalized Gellan Gum (GG) to produce an injectable hydrogel with radical scavenging activity having both specific and aspecific antibiotic/antimicrobial properties. Using starting GG with different molecular weights, we obtained two derivatives that have been used to prepare the gel precursor dispersion, that undergoes gelation in the presence of colistin and dried microparticles (MPs) functionalized on the surface with polydopamine (pDA). Both were used to dope the hydrogel, increase the radical scavenger activity and impart near-infrared light (NIR) responsiveness. Indeed, with an irradiation of 810 nm, the incorporated microparticles exhibit photothermal transformation properties and improve the release of antibiotics on demand. The combination of photothermal and antibiotic therapy with synergistic antibacterial action acts on Pseudomonas aeruginosa and leads to a bactericidal effect in a few hours, while on Staphylococcus aureus there is an effect of inhibition of growth over time due only to the hyperthermic effect. We believe this study provides a promising method for fabricating a multifunctional injectable hydrogel for the potential treatment of infected skin wounds.

Fabrication of silver nanoparticles by a diethylene triamine-hyaluronic acid derivative and use as antibacterial coating.

In this work a synthetic protocol for the functionalization of hyaluronic acid with diethylenetriamine (DETA) was standardized. HA-DETA derivatives were characterized by NMR and proton carbon correlation analysis HSQC and HMBC to confirm chemical structure. A selected derivative was used to set up a green fabrication procedure for HA-DETA capped silver nanoparticles with the aim to achieve a polymeric based coating with potential application in the treatment of medical devices associated infections. Data from UV-visible spectroscopy, electron scanning and transmission microscope (STEM), photoelectric spectroscopy (XPS) and rheological characterization were combined to characterize the HA-DETA/Ag nanocomposites. HA-DETA stabilized Ag nanoparticles (10-30 nm) were obtained through an UV accelerated production. The viability of MC3T3-E1 was analyzed with the aim of designing a cytocompatible antimicrobial coating. Antibacterial and antibiofilm activity of HA-DETA/Ag nanocomposites have been tested in vitro against Staphylococcus aureus and Pseudomonas aeruginosa both in culture plates than on titanium specimens.

Development of stimulus-sensitive electrospun membranes based on novel biodegradable segmented polyurethane as triggered delivery system for doxorubicin.

In this work, redox-sensitive polyurethane urea (PUU) based electrospun membranes have been exploited to chemically tether a pH-sensitive doxorubicin derivative achieved by linking a lipoyl hydrazide to the drug via a hydrazone linkage. First, the lipoyl-hydrazone-doxorubicin derivative labelled as LA-Hy-Doxo has been synthesized and characterized. Then, the molecule has been tethered, via a thiol-disulfide exchange reaction, to the redox-sensitive PUU (PolyCEGS) electrospun membrane. The redox-sensitive PolyCEGS PUU has been produced by using PCL-PEG-PCL polyol and glutathione-tetramethyl ester (GSSG-OMe)4 as a chain extender. The LA-Hy-Doxo tethered electrospun membrane has showed a dually controlled release triggered by acidic and reducing conditions, producing a significant cytotoxic effect in human breast cancer cell lines (MCF-7) which has validated the system for the post-surgical treatment of solid tumors to contrast recurrence.

Photothermal nanofibrillar membrane based on hyaluronic acid and graphene oxide to treat Staphylococcus aureus and Pseudomonas aeruginosa infected wounds.

Here we reported the fabrication of an electrospun membrane based on a hyaluronic acid derivative (HA-EDA) to be used as a bandage for the potential treatment of chronic wounds. The membrane, loaded with graphene oxide (GO) and ciprofloxacin, showed photothermal properties and light-triggered drug release when irradiated with a near-infrared (NIR) laser beam. Free amino groups of HA-EDA derivative allowed autocrosslinking of the electrospun membrane; thus, a substantial enhancement in the hydrolytic resistance of the patch was obtained. In vitro antibacterial activity studies performed on Staphylococcus aureus and Pseudomonas aeruginosa revealed that such electrospun membranes, due to the synergistic effect of the antibiotic and NIR-mediated hyperthermia, reduced the viability of both pathogens. Specific in vitro experiment demonstrated also that is possible to disrupt, through laser irradiation, the biofilms formed onto the membrane.

Correlating Rheological Properties of a Gellan Gum-Based Bioink: A Study of the Impact of Cell Density.

Here, for the production of a bioink-based gellan gum, an amino derivative of this polysaccharide was mixed with a mono-functionalized aldehyde polyethyleneglycol in order to improve viscoelastic macroscopic properties and the potential processability by means of bioprinting techniques as confirmed by the printing tests. The dynamic Schiff base linkage between amino and aldehyde groups temporally modulates the rheological properties and allows a reduction of the applied pressure during extrusion followed by the recovery of gellan gum strength. Rheological properties, often related to printing resolution, were extensively investigated confirming pseudoplastic behavior and thermotropic and ionotropic responses. The success of bioprinting is related to different parameters. Among them, cell density must be carefully selected, and in order to quantify their role on printability, murine preostoblastic cells (MC3T3-E1) and human colon tumor cells (HCT-116) were chosen as cell line models. Here, we investigated the effect of their density on the bioink's rheological properties, showing a more significant difference between cell densities for MC3T3-E1 compared to HCT-116. The results suggest the necessity of not neglecting this aspect and carrying out preliminary studies to choose the best cell densities to have the maximum viability and consequently to set the printing parameters.

Composite Hydrogels of Alkyl Functionalized Gellan Gum Derivative and Hydroxyapatite/Tricalcium Phosphate Nanoparticles as Injectable Scaffolds for bone Regeneration.

An alkyl functionalized gellan gum derivative is here used to produce hydrogels containing hydroxyapatite and tricalcium phosphate nanoparticles as injectable nanostructured scaffolds for bone regeneration. The amphiphilic nature of the polysaccharide derivative along with its thermotropic behavior and ionotropic crosslinking features make possible to produce injectable bone mimetic scaffolds that can be used to release viable cells and osteoinductive biomolecules. The influence of different nanoparticles concentration on the rheological and physicochemical properties of the injectable systems is studied. It is found that the presence of inorganic nanoparticles reinforces the 3D hydrated polymeric networks without influencing their injectability but improving the physicochemical properties of ionotropic crosslinked hydrogels produced with two different curing media. Preliminary cytocompatibility tests performed with murine preosteoblast cells revealed that gellan gum based hydrogels can safely encapsulate viable cells. Loading and release experiments for dexamethasone and stromal cell-derived factor-1 demonstrate the drug delivery features of the obtained injectable systems.

Ciprofloxacin releasing gellan gum/polydopamine based hydrogels with near infrared activated photothermal properties.

In this work, with the aim to obtain a wound dressing hydrogel, an amine derivative of gellan gum was crosslinked in the presence of 4arm-polyethylenglycole-vinylsulfone. Through this easy and reproducible chemical procedure, a hydrogel with advanced elastic properties and hydrolytic resistance under physiological conditions was obtained. The incorporation of different quantities of polydopamine in the gelling solutions allows to obtain different hydrogels with marked photothermal properties when irradiated with a laser in the near infrared at 810 nm. The organic nanoparticles, reacting with the amino groups of the polysaccharide derivative, contribute to increase the storage moduli of the hydrogels. Ciprofloxacin was loaded into the hydrogel with higher amount of polydopamine and drug delivery experiments were performed to investigate the effect of irradiation on the antibiotic release profile. Antimicrobial studies, evaluated against S. aureus and P. aeruginosa, revealed that generated hyperthermia exerts a direct inhibition on the pathogens growth and, in the case of S. aureus, adjuvates the ciprofloxacin antimicrobial effect.

Physicochemical and Rheological Characterization of Different Low Molecular Weight Gellan Gum Products and Derived Ionotropic Crosslinked Hydrogels.

A series of four different low molecular weight gellan gum products was obtained by alkaline hydrolysis with the aim to investigate the impact of the molecular weight on the rheological properties of the polysaccharide aqueous dispersions and on the physicochemical characteristics of derived ionotropic crosslinked hydrogels. In particular, thermo-rheological analysis was conducted on aqueous dispersions to study the influence of molecular weight on the thermogelation properties typical of the native polysaccharide while strain sweep experiments were conducted to establish if aqueous dispersion shows a viscoelastic behavior. The effect of different Ca2+ on the rheological properties of hydrogels were studied. Furthermore, ionotropic crosslinked hydrogels were analyzed in terms of morphology on the dried state and swelling behavior, while their viscoelastic properties were studied by means of rheological analysis conducted in frequency sweep regime after different time points of incubation in phosphate buffer at pH 7.4. Release experiments conducted using fluorescein isothiocyanate labelled dextran as a model diffusion agent and was performed to investigate the possibility of using the low molecular weight GG-derived hydrogels as an active molecule-releasing device. Finally, the cytocompatibility of hydrolysis products was investigated, as well as the capacity of hydrogels to encapsulate viable MC3T3-E1 preosteoblastic cells.

An asymmetric electrospun membrane for the controlled release of ciprofloxacin and FGF-2: Evaluation of antimicrobial and chemoattractant properties.

Here, an asymmetric double-layer membrane has been designed and fabricated by electrospinning as a tool for a potential wound healing application. A hydrophobic layer has been produced by using a polyurethane-polycaprolactone (PU-PCL) copolymer and loaded with the antibacterial ciprofloxacin whereas an ion responsive hydrophilic layer has been produced by using an octyl derivative of gellan gum (GG-C8) and polyvinyl alcohol (PVA) and loaded with the growth factor FGF-2. This study investigated how the properties of this asymmetric membrane loaded with actives, were influenced by the ionotropic crosslinking of the hydrophilic layer. In particular, the treatment in DPBS and the crosslinking in CaCl2 0.1 or 1 M of the hydrophilic layer affected the release profile of the bioactive molecules allowing to modulate both the antimicrobial effect, as assayed by logarithmic reduction of the Staphylococcus aureus viable count, and the chemoattractant properties on NIH 3 T3 cell line, as assayed by scratch test and cell chemoattraction assay.

Hyaluronan alkyl derivatives-based electrospun membranes for potential guided bone regeneration: Fabrication, characterization and in vitro osteoinductive properties.

The aim of the work was to determine the effects of the chemical functionalization of hyaluronic acid (HA) with pendant aliphatic tails at different lengths and free amino groups in terms of chemical reactivity, degradation rate, drug-eluting features, and surface properties when processed as electrospun membranes (EM) evaluating the osteoinductive potential for a possible application as guided bone regeneration (GBR). To this end, a series of HA derivatives with different aliphatic tails (DD-Cx mol% ≈ 12.0 mol%) and decreasing derivatization of free amino groups (DDEDA mol% from 70.0 to 30.0 mol%) were first synthesized, namely Hn. Then dexamethasone-loaded Hn EM, i.e. HnX were prepared from aqueous polymeric solutions with polyvinyl alcohol (PVA), as a non-ionogenic linear flexible polymeric carrier, and the multifunctional 2-hydroxypropyl- cyclodextrin (HPCD) which acted as a rheological modifier, a stabilizer of Taylor's cone, and a solubilizing agent. A comprehensive characterization of the membranes was carried out through ATR-IR, XRD, and WCA measurements. According to the in vitro hydrolytic and enzymatic degradation and drug release in different aqueous media for two months, the insertion of alkyl pendant grafts and the crosslinking process provided tuneable additional resistance to the whole membrane suitably for the final application of the membranes. Cell culture showed the cytocompatibility and cell proliferation until 7 days. Osteogenic differentiation and mineralization of pre-osteoblastic MC3T3 cells occurred for most of membranes after 35 days as valued by measuring ALP activity (50 nmol 4-np/h/nf DNA) and the deposition of calcium (120-140 µg ml-1).

A self-sterilizing fluorescent nanocomposite as versatile material with broad-spectrum antibiofilm features.

Hematogenous spread of infections from colonized central intravenous catheters or central lines is a long-recognized problem with infection rates of 2 and 6.8 per 1000 days, respectively. Besides, removal of severe microbial colonization of implanted biomaterials is still a challenge and usually requires invasive operations. Hence, on demand self-sterilizing materials are required to avoid explant of colonized biomaterials and improve patient compliance. Moreover, photoluminescence is needed to make trackable biomaterials, which can be easily monitored upon implanting them in the body. Here, we propose the incorporation of near infrared (NIR) sensitive red-emitting carbon nanodot (CDs) into a polymeric matrix to give rise to innovative biomaterials with self-tracking and photothermal antimicrobial abilities. We obtain a material which can be processed to obtain medical devices using different techniques, among which, for instance, electrospinning. Herein, a proof-of-concept preparation of electrospun scaffolds is reported as it is highly desired in biomedical applications. Beside to confer imaging properties to the scaffold, that would allow an easy control over the in vivo positioning of implanted biomaterials as well as its degradation state and grade of integration with the surrounding native tissues, thanks to the capability to convert NIR light into local heat CDs can be exploited to exert broad-spectrum antimicrobial effect toward several pathogens. The rise in temperature can be easily modulated by controlling the irradiation time to achieve both an in vitro self-sterilization of the device and eventually in vivo destabilization of the microbial colonization. This innovative biomaterial could successfully inhibit biofilm formation and might be used as a powerful tool to treat antibiotic-resistant nature of biofilm-related infections in implanted medical devices.

A hyaluronic acid/cyclodextrin based injectable hydrogel for local doxorubicin delivery to solid tumors.

Localized delivery of anticancer drugs is often the most useful therapeutic approach for the treatment of solid tumors. The use of injectable polymeric systems that maximize drug concentration in the proximal area of the tumor represents an extremely advantageous therapeutic strategy. Here, the development of an injectable in situ forming hydrogel was accomplished by exploiting the azo-type Michael reaction between an amine derivative of hyaluronic and vinylsulfone functionalized ß-cyclodextrins complexing doxorubicin. This injectable system can be easily prepared and administered with timelines compatible with normal operating room procedures, as demonstrated by rheological tests. In vitro experiments revealed that the peculiar physicochemical properties of the hydrogel guarantee a sustained release of the anticancer drug that blocks the growth of colorectal carcinoma micromasses cultured in 3D conditions. In vivo studies have confirmed that the medicated hydrogel can drastically reduce the tumor mass in the animal model without causing cytotoxic side effects in other areas of the body such as the heart. Overall, the proposed system has shown promising characteristics that make it an interesting useful device for localized chemotherapy of solid tumors.

New gellan gum-graft-poly(d,l-lactide-co-glycolide) copolymers as promising bioinks: Synthesis and characterization.

This research focused on the aim of tackling the urgent demand of printable biomaterials, hence we synthetized and characterized three gellan gum-graft-poly(d,l-lactide-co-glycolide) copolymers (GGm-PLGA a, b and c) which differed in the graft substitution degree. We investigated the effect of the polyester chain grafted onto hydrophilic backbone of gellan gum in terms of physicochemical properties and the ability of the system to print 3D cell laden constructs. In particular, we evaluated thermo-rheological, ionotropic crosslinking, shear thinning, swelling and stability properties of these copolymers and their derived biomaterials and findings related to the degree of functionalization. Moreover, the optimization of the 3D process parameters and the effect of different water/DPBS mixtures was investigated, demonstrating the feasibility of the system to print 3D constructs. Finally, biological tests revealed that fibroblasts and chondrocytes remained viable after printing and over a culture period of seven days into scaffolds.

Production and physicochemical characterization of a new amine derivative of gellan gum and rheological study of derived hydrogels.

The production of an amine derivative of gellan gum, named GG-EDA, was here obtained by functionalizing the polysaccharide backbone with pendant ethylenediamine moieties. The obtained derivative was characterized by spectroscopic, colorimetric, chromatographic and rheological analyses to study the effect of the free amino groups on the physicochemical properties of the macromolecule. A titration experiment was conducted to study the acid-base dissociation constants in aqueous media for the carboxylic and amino groups in the GG-EDA and to shed light on the possibility that the derivative shows a polyampholyte structure under physiological conditions. The rheological analysis conducted on both physical and chemical hydrogels based on GG-EDA revealed that the presence of amino groups plays a fundamental role in influencing the viscoelastic properties and stability of the produced samples.