Experimental and computational thermochemical study of N-benzylalanines.

Calorimetric measurements are expected to provide useful data regarding the relative stability of α- versus ß-amino acid isomers, which, in turn, may help us to understand why nature chose α- instead of ß-amino acids for the formation of the biomolecules that are essential constituents of life on earth. The present study is a combination of the experimental determination of the enthalpy of formation of N-benzyl-ß-alanine, and high-level ab initio calculations of its molecular structure. The experimentally determined standard molar enthalpy of formation of N-benzyl-ß-alanine in gaseous phase at T = 298.15 K is -(298.8 ± 4.8) kJ·mol(-1), whereas its G3(MP2)//B3LYP-calculated enthalpy of formation is -303.7 kJ·mol(-1). This value is in very good agreement with the experimental one. Although the combustion experiments of N-benzyl-α-alanine were unsuccessful, its calculated enthalpy of formation is -310.7 kJ·mol(-1); thus, comparison with the corresponding experimental enthalpy of formation of N-benzyl-ß-alanine, -(298.8 ± 4.8) kJ/mol, is in line with the concept that the more branched amino acid (α-alanine) is intrinsically more stable than the linear ß-amino acid, ß-alanine.

Experimental and computational thermochemical study of barbituric acids: structure-energy relationship in 1,3-dimethylbarbituric acid.

This paper reports an experimental and computational thermochemical study on 1,3-dimethylbarbituric acid. The value of the standard (p° = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by static bomb combustion calorimetry, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -639.6 ± 1.9 kJ·mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated N(2) stream and a value of the enthalpy of sublimation at T = 298.15 K was derived as 92.3 ± 0.6 kJ·mol(-1). From these results a value of -547.3 ± 2.0 kJ·mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 and G4 levels were performed, and a study on molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in very good agreement with the experimental value.

Experimental and computational thermochemical study of α-alanine (DL) and ß-alanine.

This paper reports an experimental and theoretical study of the gas phase standard (p° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, of α-alanine (DL) and ß-alanine. The standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline α-alanine (DL) and ß-alanine were calculated from the standard molar energies of combustion, in oxygen, to yield CO2(g), N2(g), and H2O(l), measured by static-bomb combustion calorimetry at T = 298.15 K. The vapor pressures of both amino acids were measured as function of temperature by the Knudsen effusion mass-loss technique. The standard molar enthalpies of sublimation at T = 298.15 K was derived from the Clausius−Clapeyron equation. The experimental values were used to calculate the standard (p° = 0.1 MPa) enthalpy of formation of α-alanine (DL) and ß-alanine in the gaseous phase, Δ(f)H(m)°(g), as −426.3 ± 2.9 and −421.2 ± 1.9 kJ·mol(−1), respectively. Standard ab initio molecular orbital calculations at the G3 level were performed. Enthalpies of formation, using atomization reactions, were calculated and compared with experimental data. Detailed inspections of the molecular and electronic structures of the compounds studied were carried out.

Experimental and computational thermochemical study of sulfur-containing amino acids: L-cysteine, L-cystine, and L-cysteine-derived radicals. S-S, S-H, and C-S bond dissociation enthalpies.

This paper reports an experimental and theoretical study of the standard (p(degrees) = 0.1 MPa) molar enthalpies of formation at T = 298.15 K of the sulfur-containing amino acids l-cysteine [CAS 52-90-4] and l-cystine [CAS 56-89-3]. The standard (p(degrees) = 0.1 MPa) molar enthalpies of formation of crystalline l-cysteine and l-cystine were calculated from the standard molar energies of combustion, in oxygen, to yield CO2(g) and H2SO4.115H2O, measured by rotating-bomb combustion calorimetry at T = 298.15 K. The vapor pressures of l-cysteine were measured as function of temperature by the Knudsen effusion mass-loss technique. The standard molar enthalpy of sublimation, at T = 298.15 K, was derived from the Clausius-Clapeyron equation. The experimental values were used to calculate the standard (p(degrees) = 0.1 MPa) enthalpy of formation of l-cysteine in the gaseous phase, DeltafH(degrees)m(g) = -382.6 +/- 1.8 kJ x mol-1. Due to the low vapor pressures of l-cystine and since this compound decomposes at the temperature range required for a possible sublimation, it was not possible to determine its enthalpy of sublimation. Standard ab initio molecular orbital calculations at the G3(MP2)//B3LYP and/or G3 levels were performed. Enthalpies of formation, using atomization and isodesmic reactions, were calculated and compared with experimental data. A value of -755 +/- 10 kJ x mol-1 was estimated for the enthalpy of formation of cystine. Detailed inspections of the molecular and electronic structures of the compounds studied were carried out. Finally, bond dissociation enthalpies (BDE) of S-H, S-S, and C-S bonds, and enthalpies of formation of l-cysteine-derived radicals, were also computed.

Experimental and theoretical study of the structures and enthalpies of formation of 3H-1,3-benzoxazole-2-thione, 3H-1,3-benzothiazole-2-thione, and their tautomers.

This paper reports an experimental and theoretical study of the structures and standard (p(o) = 0.1 MPa) molar enthalpies of formation of 3H-1,3-benzoxazole-2-thione and 3H-1,3-benzothiazole-2-thione. The enthalpies of combustion and sublimation were measured by rotary bomb combustion calorimetry and the Knudsen effusion technique, and gas-phase enthalpies of formation values at T = 298.15 K of (42.0 +/- 2.7) and (205.5 +/- 3.8) kJ x mol(-1) for 3H-1,3-benzoxazole-2-thione and 3H-1,3-benzothiazole-2-thione, respectively, were determined. G3-calculated enthalpies of formation are in excellent agreement with the experimental values. The present work discusses the question of tautomerism explicitly for both compounds and compares the energetics of all the related species. A comparison of the theoretical results with the structural data is also reported.

Experimental and computational thermochemical study and solid-phase structure of 5,5-dimethylbarbituric acid.

This paper reports an experimental and computational thermochemical study on 5,5-dimethylbarbituric acid and the solid-phase structure of the compound. The value of the standard (p(o) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K has been determined. The energy of combustion was measured by static bomb combustion calorimetry, and from the result obtained, the standard molar enthalpy of formation in the crystalline state at T = 298.15 K was calculated as -(706.4 +/- 2.2) kJ x mol(-1). The enthalpy of sublimation was determined using a transference (transpiration) method in a saturated NB(2) stream, and a value of the enthalpy of sublimation at T = 298.15 K was derived as (115.8 +/- 0.5) kJ x mol(-1). From these results a value of -(590.6 +/- 2.3) kJ x mol(-1) for the gas-phase enthalpy of formation at T = 298.15 K was determined. Theoretical calculations at the G3 level were performed, and a study on molecular and electronic structure of the compound has been carried out. Calculated enthalpies of formation are in reasonable agreement with the experimental value. 5,5-Dimethylbarbituric acid was characterized by single crystal X-ray diffraction analysis. In the crystal structure, N-H...O=C hydrogen bonds lead to the formation of ribbons connected further by weak C-H...O=C hydrogen bonds into a three-dimensional network. The molecular and supramolecular structures observed in the solid state were also investigated in the gas phase by DFT calculations.

Experimental and theoretical study of the structures and enthalpies of formation of the synthetic reagents 1,3-thiazolidine-2-thione and 1,3-oxazolidine-2-thione.

This paper reports an experimental and a theoretical study of the structures and standard (p(o) = 0.1 MPa) molar enthalpies of formation of the synthetic reagents 1,3-thiazolidine-2-thione [CAS 96-53-7] and 1,3-oxazolidine-2-thione [CAS 5840-81-3]. The enthalpies of combustion and sublimation were measured by rotary bomb combustion calorimetry, and the Knudsen effusion technique and gas-phase enthalpies of formation values at T = 298.15 K of (97.1 +/- 4.0) and -(74.4 +/- 4.6) kJ.mol(-1) for 1,3-thiazolidine-2-thione and 1,3-oxazolidine-2-thione, respectively, were determined. G3-calculated enthalpies of formation are in reasonable agreement with the experimental values. In the solid state, 1,3-thiazolidine-2-thione exists in two polymorphic forms (monoclinic and triclinic) and 1,3-oxazolidine-2-thione exits in the triclinic form. The isostructural nature of these compounds and comparison of their molecular and crystal structures have been analyzed. The experimental X-ray powder diffractograms have been compared with the calculated patterns from their structures for identification of the polymorphic samples used in this study. A comparison of our results with literature thermochemical and structural data for related compounds is also reported.

Thermochemistry of 2- and 3-thiopheneacetic acids: calorimetric and computational study.

The enthalpies of formation in the condensed and gas states, Delta f H m degrees (cd) and Delta f H m degrees (g), of 2- and 3-thiopheneacetic acids were derived from their respective enthalpies of combustion in oxygen, measured by a rotating bomb calorimeter, and the variation of vapor pressure with temperature determined by the Knudsen effusion technique. Theoretical calculations at the G3 level were performed, and a study on molecular and electronic structure of the compounds has been carried out. Calculated Delta f H m degrees (g) values using atomization and isodesmic reactions are compared with the experimental data. Experimental and theoretical results show that the 3-thiopheneacetic acid is thermodynamically more stable than the 2-isomer.

Structure-energy relationship in barbituric acid: a calorimetric, computational, and crystallographic study.

This paper reports the value of the standard (p(o) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K for barbituric acid. The enthalpies of combustion and sublimation were measured by static bomb combustion calorimetry and transference (transpiration) method in a saturated N2 stream and a gas-phase enthalpy of formation value of -(534.3 +/- 1.7) kJ x mol(-1) was determined at T = 298.15 K. G3-calculated enthalpies of formation are in very good agreement with the experimental value. The behavior of the sample as a function of the temperature was studied by differential scanning calorimetry, and a new polymorph of barbituric acid at high temperature was found. In the solid state, two anhydrous forms are known displaying two out of the six hydrogen-bonding patterns observed in the alkyl/alkenyl derivatives retrieved from the Cambridge Crystallographic Database. The stability of these motifs has been analyzed by theoretical calculations. X-ray powder diffraction technique was used to establish to which polymorphic form corresponds to the commercial sample used in this study and to characterize the new form at high temperature.

Solvent-free thermal and microwave-assisted [3 + 2] cycloadditions between stabilized azomethine ylides and nitrostyrenes. An experimental and theoretical study.

The stereochemical outcomes observed in the thermal and microwave-assisted [3 + 2] cycloaddition between stabilized azomethine ylides and nitrostyrenes have been analyzed using experimental and computational approaches. It has been observed that, in the absence of solvent, three stereoisomers are formed, both under classical heating conditions and under microwave irradiation. This result contrasts with that observed in solution under classical thermal conditions. The 4-nitropyrrolidines obtained in this way can be aromatized under further microwave irradiation to yield mixtures of pyrroles and 4-nitropyrroles. It is found that ground state cycloadditions between imines and nitrostyrenes take place by three-step mechanisms. The first step involves enolization of the starting imine, and this is followed by a pseudopericyclic 10-electron [1.4]-hydrogen shift. Finally, the cycloaddition takes place by a relatively asynchronous aromatic six-electron supra-supra thermal mechanism.

Thermochemistry of 2,5-thiophenedicarboxylic acid.

The enthalpies of combustion and sublimation of 2,5-thiophenedicarboxylic acid [CASRN 4282-31-9] were measured by rotary-bomb combustion calorimetry and the method of transference in a saturated stream of nitrogen, and the gas-phase enthalpy of formation was determined, Delta(f)H(o)(m)(g) = -(632.6 +/- 2.2) kJ x mol(-1). Standard ab initio molecular orbital calculations at the G2(MP2) and G3(MP2) levels were performed, and a theoretical study on the molecular and electronic structure of the compound has been carried out. The three most stable conformers have been explicitly taken into account. The calculated enthalpy of formation averaged using three different isodesmic reactions, -631.1 kJ x mol(-1), is in very good agreement with the experimental value. A comparison of the substituent effect of the carboxylic groups in benzene and thiophene ring has been made. The relative stability obtained for the substitution of two H atoms by COOH in position 2,5- for thiophene and 1,4- for benzene involve the same energetic effects, DeltaDelta(f)H(o)(m)= -747.6 +/- 2.4 and -748.2 +/- 2.7 kJ x mol(-1), respectively.

Distinct dynamic behaviors of water molecules in hydrated pores.

Water molecules confined inside narrow pores are of great importance in understanding the structure, stability, and function of water channels. Here we report that besides the H-bonding water that structures the pore, the permanent presence of a significant, fast-moving fraction of incompletely H-bonded water molecules inside the pore should control the free entry and exit of water. This is achieved by means of complementary DSC and solid-state NMR studies. We also present compelling evidence from X-ray diffraction data that the cluster formed by six water molecules in the most stable cage-like structure is sufficiently hydrophobic to be stably adsorbed in a nonpolar environment.

Synthesis and structure of hydroxyl acids of general structure 7,7-alkenyl/alkynyl-5-hydroxymethyl-6-oxabicyclo[3.2.1]octane-1-carboxylic acid.

The open-ended hollow tubular structure formed by inclusion of water molecules in the packing of the hydroxyl acid 1 (R1 = CH2OH, R2 = ethyl groups) led to the synthesis and structural study of their unsaturated analogues. In this article we report on a general and practical large-scale synthesis of hydroxyl acids that possess alkenyl and alkynyl appendages. Substitution of the ethyl groups in 1 with unsaturated two-carbon appendages has a different effect on the molecular structure and on the hydrogen-bonding pattern. No variation has been induced by substitution of only one ethyl group with a vinyl one, although the substitution of both ethyl groups with vinyl or acetylene appendages has the greatest effect on the molecular structure and results in different hydrogen-bonding motifs.

Structural determinants of tissue tropism and in vivo pathogenicity for the parvovirus minute virus of mice.

Two strains of the parvovirus minute virus of mice (MVM), the immunosuppressive (MVMi) and the prototype (MVMp) strains, display disparate in vitro tropism and in vivo pathogenicity. We report the crystal structures of MVMp virus-like particles (MVMp(b)) and native wild-type (wt) empty capsids (MVMp(e)), determined and refined to 3.25 and 3.75 A resolution, respectively, and their comparison to the structure of MVMi, also refined to 3.5 A resolution in this study. A comparison of the MVMp(b) and MVMp(e) capsids showed their structures to be the same, providing structural verification that some heterologously expressed parvovirus capsids are indistinguishable from wt capsids produced in host cells. The structures of MVMi and MVMp capsids were almost identical, but local surface conformational differences clustered from symmetry-related capsid proteins at three specific domains: (i) the icosahedral fivefold axis, (ii) the "shoulder" of the protrusion at the icosahedral threefold axis, and (iii) the area surrounding the depression at the icosahedral twofold axis. The latter two domains contain important determinants of MVM in vitro tropism (residues 317 and 321) and forward mutation residues (residues 399, 460, 553, and 558) conferring fibrotropism on MVMi. Furthermore, these structural differences between the MVM strains colocalize with tropism and pathogenicity determinants mapped for other autonomous parvovirus capsids, highlighting the importance of common parvovirus capsid regions in the control of virus-host interactions.

Water molecules in hydroxy/acid networks as a competition between dynamics and bonding. Synthesis of a wet hydrophobic pore.

In a model formed by hydroxy acids with a general structure (+/-)-1, we found that solid-state structures depend on steric interactions. Thus, with the exception of molecules 1b and 1e, compounds (+/-)-1a-(+/-)-1m, which possess bulky and conformationally rigid substituents, aggregate by forming tapes and sheets by alternating (+) and (-) subunits held together via carboxylic acid to alcohol hydrogen bonds. Homologue (+/-)-1n with conformationally flexible substituents, which allow conformational deformation gives, by way of the incorporation of water molecules, an efficient hexagonal assembly, which extends to the third-dimension to form tubular H-bonding networks. Each puckered channel can be described as being interconnected by closely packed hexagons in chair-like conformations. The ethyl groups presented in (+/-)-1n provided the volume required to lock the inner hexagonal wall into a rigid structure.

Cause of hydration/dehydration in condensed organic materials: synthesis of hydrophobic pores.

[reaction: see text] The unique solid-state hydration/dehydration properties of the diacid (+/-)-1e in comparison with other homologues of the same family are studied. Hydrophobic enhancement, which is a consequence of the loss of water molecules from (+/-)-1e chains, is a property that can be exploited to achieve organic condensed systems for nonpolar molecules by interstitial van der Waals confinement.

Fentanyl and its analogue N-(1-phenylpyrazol-3-yl)-N-[1-(2-phenylethyl)-4-piperidyl]propanamide: 1H- and 13C-NMR spectroscopy, X-ray crystallography, and theoretical calculations.

The oxalate salts and free bases of fentanyl and N-[1-(2-phenylethyl)-4-piperidyl]-N-(1-phenyl-4-pyrazolyl)propanamide, a new lead compound for long-acting analgesia, have been characterized by (1)H- and (13)C-NMR spectroscopy. The crystal structure of the hydrochloride of N-[1-(2-phenylethyl)-4-piperidyl]-N-(1-phenyl-4-pyrazolyl)propanamide monohydrate has been determined. Two centrosymmetrically related cations, joined through C(phenyl)-H em leader pi contacts, encapsulate a large void that contains pairs of anions and bridged water molecules into a zero-dimensional (0D) supramolecular motif. The cations are linked to this framework via N(+)H em leader Cl(-) contacts. GIAO/B3LYP calculations have been carried out to compare the experimental (13)C chemical shifts with the absolute shieldings thus calculated. The protonation of both molecules takes place on the piperidine ring (axial protonation), as has been verified both in the solid state (X-ray) and in solution (NMR).

Controlled incorporation of water molecules into carboxy hydrogen-bond networks: a designed approach.

The incorporation of water molecules into the hydrogen-bonded pattern of condensed organic materials implies an unfavorable entropic tradeoff resulting from water ordering. Here we show for a family of diacids of general structure (+/-)-1 that extended chains of anhydrous or hydrated structures can be prepared by controlling the steric factors that lead to the closest packing of individual components.

Synthesis, structural determination and dynamic behavior of 2-chloro-4,6-bis(pyrazolylamino)-1,3,5-triazines.

A series of 2-chloro-4,6-bis(pyrazolylamino)-1,3,5-triazines with applications in crystal engineering have been prepared. At low temperature, the presence of two or three isomers has been detected and these assigned to 4,6-diamino-1,3,5-triazine structures on the basis of comparison with model compounds. 2D-Exchange spectroscopy studies in various solvents and at different temperatures have been used to determine the equilibrium constants and the activation free energies of the restricted rotation about the amino-triazine bond. A plot of the activation free energy versus temperature showed a good linear correlation and confirmed that the same process is present in all of the compounds under investigation. Comparison with model compounds also confirmed both the occurrence of the restricted rotation and the 4,6-diamino-1,3,5-triazine tautomerism for triazines 1-4 in solution. The structure of compound 1 has been determined in the solid state by X-ray crystallography and consists ofa 4,6-diamino- 1,3,5-triazine structure stabilized by intra and intermolecular hydrogen bonds.

Enhancing stereochemical diversity by means of microwave irradiation in the absence of solvent: synthesis of highly substituted nitroproline esters via 1,3-dipolar reactions.

Microwave irradiation induces the 1,3-dipolar cycloaddition of imines derived from alpha-aminoesters with beta-nitrostyrenes in the absence of solvent within 10-15 min. The reaction proceeds to give yields in the range 81-86% and three isomeric pyrrolidines are obtained in the cycloaddition. Consequently, the use of three imines and two beta-nitrostyrenes gives rise to a library of 18 nitroproline esters. The use of classical heating with longer reaction times (24 h) gives lower yields of products (below 50%) and only two stereoisomers can be detected in each reaction.