Synthesis of Keratin Nanoparticles Extracted from Human Hair through Hydrolysis with Concentrated Sulfuric Acid: Characterization and Cytotoxicity.

Human hair, composed primarily of keratin, represents a sustainable waste material suitable for various applications. Synthesizing keratin nanoparticles (KNPs) from human hair for biomedical uses is particularly attractive due to their biocompatibility. In this study, keratin was extracted from human hair using concentrated sulfuric acid as the hydrolysis agent for the first time. This process yielded KNPs in both the supernatant (KNPs-S) and precipitate (KNPs-P) phases. Characterization involved scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Zeta potential analysis, X-ray diffraction (XRD), and thermogravimetric analysis (TG). KNPs-S and KNPs-P exhibited average diameters of 72 ± 5 nm and 27 ± 5 nm, respectively. The hydrolysis process induced a structural rearrangement favoring ß-sheet structures over α-helices in the KNPs. These nanoparticles demonstrated negative Zeta potentials across the pH spectrum. KNPs-S showed higher cytotoxicity (CC50 = 176.67 µg/mL) and hemolytic activity, likely due to their smaller size compared to KNPs-P (CC50 = 246.21 µg/mL), particularly at concentrations of 500 and 1000 µg/mL. In contrast, KNPs-P did not exhibit hemolytic activity within the tested concentration range of 32.5 to 1000 µg/mL. Both KNPs demonstrated cytocompatibility with fibroblast cells in a dose-dependent manner. Compared to other methods reported in the literature and despite requiring careful washing and neutralization steps, sulfuric acid hydrolysis proved effective, rapid, and feasible for producing cytocompatible KNPs (biomaterials) in single-step synthesis.

Carboxymethylcellulose hydrogels crosslinked with keratin nanoparticles for efficient prednisolone delivery.

Carboxymethylcellulose (CMC) and keratin nanoparticle (KNP) hydrogels were obtained, characterized, and applied as drug delivery systems (DDSs) for the first time. Lyophilized CMC/KNP mixtures containing 10, 25, and 50 wt% of KNPs were kept at 170 °C for 90 min to crosslink CMC chains through a solid-state reaction with the KNPs. The hydrogels were characterized by infrared spectroscopy, thermal analyses, X-ray diffraction, mechanical measurements, and scanning electron microscopy. The infrared spectra indicated the formation of ester and amide linkages between crosslinked CMC and KNPs. The elastic modulus of the hydrogel containing 10 wt% KNPs was 2-fold higher than that of the hydrogel containing 50 wt% KNPs. The mechanical properties influenced the hydrogel stability and water uptake. The anti-inflammatory prednisolone (PRED) drug was incorporated into the hydrogels, and the release mechanism was investigated. The hydrogels supported PRED release by drug desorption for approximately 360 h. A sustained release mechanism was achieved. The CMC/KNP and CMC/KNP/PRED hydrogels were cytocompatible toward mammalian cells. The CMC/KNP/PRED set imparted the highest cell viability after 7 days of incubation. This study showed a straightforward procedure to create DDSs (chemically crosslinked) based on polysaccharides and proteins for efficient PRED delivery.

Designing hybrid materials with multifunctional interfaces for wound dressing, electrocatalysis, and chemical separation.

An infinite number of possibilities can emerge from the combination of phases in hybrid systems. Interfacing phases is a strategy to obtain a set of properties in one system that are beyond the abilities of single phases. Herein, the progress in materials science exploring hybrid systems are discussed from the point of view of three important applications: wound dressing; electrocatalysis; and chemical separation. These three unrelated applications exemplify the broad impact of hybrid materials, which can be coherently designed to achieve outstanding performance. Many inspiring works have been published in the last few years, remodeling the edges of human knowledge on hybrid materials. However, the challenges in the coherent design seem to rely on the development of synthetic processes to achieve stronger integration among the phases in a hybrid material.

Cellulose nanowhiskers decorated with silver nanoparticles as an additive to antibacterial polymers membranes fabricated by electrospinning.

Antimicrobial films based on distinct polymer matrices, poly (vinyl alcohol) (PVA) or poly (N-isopropylacrylamide) (PNIPAAm), and silver nanoparticles (AgNPs) immobilized onto cellulose nanowhiskers (CWs) were successfully prepared by either casting or electrospinning. CWs were first functionalized with carboxylate groups (labeled as CWSAc) and later they were immersed in a silver nitrate solution (AgNO3). After Ag+ ions anchored in the COO- groups are chemically reduced to produce AgNPs. The CWSAc/AgNPs biological activity was evaluated against Staphylococcus aureus (S. aureus), Bacillus Subtilis (B. subtilis), Escherichia coli (E. coli), and Candida albicans (C. albicans). The materials were more effective against C. albicans that showed a MIC of 15.6 µg/mL. In the process of AgNPs synthesis, the activity of the stabilizing agent (gelatin) and concentration of precursor and reducing agents were evaluated. The synthesized polymeric films displayed good antimicrobial activity against S. aureus, E. coli, and Pseudomonas aeruginosa (P. aeruginosa) bacteria. The PVA films with CWSAc/AgNPs showed diameter of the inhibition halo of up to 11 mm. The results obtained displayed that the films obtained have a potential application to be used in different fields such as packaging, membrane filtration, wound dressing, clothing and in different biomedical applications.

Mechanically improved polyvinyl alcohol-composite films using modified cellulose nanowhiskers as nano-reinforcement.

Cellulose nanowhiskers (CWs) extracted from cotton fibers were successfully modified with distinct anhydrides structures and used as additives in poly(vinyl alcohol) (PVA) nanocomposite films. The surface modification of CWs was performed with maleic, succinic, acetic or phthalic anhydride to compare the interaction and action the carboxylic groups into PVA films and how these groups influence in mechanical properties of the nanocomposites. CWs presented a high degree of crystallinity and good dispersion in water, with average length at the nanoscale. The addition of specific amounts (3, 6 and 9 wt.%) of modified-CWs increased up to 4.4 times the storage modulus (PVA88-CWSA 9 wt.%), as observed from dynamic mechanical analysis (DMA), compared to the bare PVA films. A significant increase in mechanical properties such as tensile strength, elastic modulus, and elongation at break showed a close relationship to the amount and chemical surface characteristics of CWs added, suggesting that these modified-CWs could be explored as reinforcement additives in PVA films.

Multifunctional hybrid aerogels: hyperbranched polymer-trapped mesoporous silica nanoparticles for sustained and prolonged drug release.

In this study, we show the synthesis of novel hybrid organic-inorganic aerogel materials with one-dimensionally aligned pores and demonstrate their use as sustained and prolonged release systems for a hydrophobic drug. The materials are synthesized by trapping mesoporous silica nanoparticles within a hyperbranched polymer network made from poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA). The synthetic method involves dispersing mesoporous silica nanoparticles in a polymer solution, then freeze-drying the solution, and finally subjecting the resulting materials to high temperature to activate a solid-state condensation reaction between PVA and PAA. Before trapping the mesoporous silica nanoparticles within the hyperbranched polymeric network, their pores are decorated with hydrophobic groups so that they can serve as good host materials for hydrophobic drugs. The potential application of the hybrid aerogels as drug carriers is demonstrated using the hydrophobic, anti-inflammatory agent dexamethasone (DEX) as a model drug. Due to their hydrophobic pores, the hybrid aerogels show excellent drug loading capacity for DEX, with an encapsulation efficiency higher than 75%. Furthermore, the release pattern of the payloads of DEX encapsulated in the aerogels is highly tailorable (i.e., it can be made faster or slower, as needed) simply by varying the PVA-to-PAA weight ratio in the precursors, and thus the 3-dimensional (3-D) structures of the cross-linked polymers in them. The materials also show sustained drug release, for over 50 days or more. In addition, the aerogels are biocompatible, as demonstrated with Vero cells, and greatly promote the cell proliferation of L929 fibroblasts. Also, the nanoparticles functionalized with quaternary groups and dispersed within the aerogels display bactericidal activity against E. coli, S. aureus, B. subtilis, and P. aeruginosa. These new hybrid aerogels can, thus, be highly appealing biomaterials for sustained and prolonged drug release, such as wound dressing systems.

Preparation and cytotoxicity of N-modified chitosan nanoparticles applied in curcumin delivery.

Nanoparticles (NPs) based on N,N-dimethyl chitosan (DMC) and N,N,N-trimethyl chitosan (TMC), physical crosslinked with sodium tripolyphosphate (TPP) were successful obtained, using water/benzyl alcohol emulsion system. NPs morphologies were evaluated by Scanning Electron Microscopy and Transmission Electron Microscopy. NPs were characterized by Infrared Spectroscopy (FTIR), Thermogravimetric Analysis, Zeta Potential, Differential Scanning Calorimetry and Wide-angle X-ray Scattering. Curcumin (CUR) was loaded onto NPs and controlled release studies were evaluated in simulated intestinal fluid and in simulated gastric fluid. Cytotoxicity assays showed only loaded TMC/TPP particles containing CUR were slightly cytotoxic on human cervical tumor cells (SiHa cells), concerning unloaded TMC/TPP particles. Conversely, loaded NPs (TMC/TPP/CUR and DMC/TPP/CUR), especially TMC/TPP/CUR sample presented greater biocompatibility toward healthy VERO cells than unloaded NPs (TMC/TPP and DMC/TPP).

Extent of shielding by counterions determines the bactericidal activity of N,N,N-trimethyl chitosan salts.

In this study, we show that the bactericidal activity of quaternized chitosans (TMCs) with sulfate, acetate, and halide counterions against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) correlates with the "availability" of N-quaternized groups [-(+)N(CH3)3] in the TMCs backbones. N,N,N-trimethyl chitosan sulfate (TMCS) and N,N,N-trimethyl chitosan acetate (TMCAc) displayed the highest activities, probably due to their delocalized π system. Among TMCs with halide counterions, activity was higher for N,N,N-trimethyl chitosan chloride (TMCCl), whereas N,N,N-trimethyl chitosan iodide (TMCI) and N,N,N-trimethyl chitosan bromide (TMCBr) exhibited lower, similar values to each other. This is consistent with the shielding of -(+)N(CH3)3 groups inferred from chemical shifts for halide counterions in (1)HNMR spectra. We also demonstrate that TMCs with distinct bactericidal activities can be classified according to their vibrational spectra using principal component analysis. Taken together, these physicochemical characterization approaches represent a predictive tool for the bactericidal activity of chitosan derivatives.

N,N-Dimethyl chitosan/heparin polyelectrolyte complex vehicle for efficient heparin delivery.

Polysaccharide-based device for oral delivery of heparin (HP) was successfully prepared. Previously synthesized N,N-dimethyl chitosan (DMC) (86% dimethylated by (1)H NMR spectroscopy) was complexed with HP by mixing HP and DMC aqueous solutions (both at pH 3.0). The polyelectrolyte complex (PEC) obtention was confirmed by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA/DTG) and wide-angle X-ray scattering (WAXS). In vitro controlled release assays of HP from PEC were investigated in the simulated intestinal fluid (SIF) and simulated gastric fluid (SGF). The PEC efficiently protected the HP in SGF condition in which HP is degraded. On the other hand, in SIF PEC promoted the releasing of 80 ± 1.5% of loaded HP. The promissory results indicated that the PEC based on DMC/HP presented potential as drug-carrier matrix, since biological activity of HP was improved at pH close to physiological condition.

Antimicrobial activity of chitosan derivatives containing N-quaternized moieties in its backbone: a review.

Chitosan, which is derived from a deacetylation reaction of chitin, has attractive antimicrobial activity. However, chitosan applications as a biocide are only effective in acidic medium due to its low solubility in neutral and basic conditions. Also, the positive charges carried by the protonated amine groups of chitosan (in acidic conditions) that are the driving force for its solubilization are also associated with its antimicrobial activity. Therefore, chemical modifications of chitosan are required to enhance its solubility and broaden the spectrum of its applications, including as biocide. Quaternization on the nitrogen atom of chitosan is the most used route to render water-soluble chitosan-derivatives, especially at physiological pH conditions. Recent reports in the literature demonstrate that such chitosan-derivatives present excellent antimicrobial activity due to permanent positive charge on nitrogen atoms side-bonded to the polymer backbone. This review presents some relevant work regarding the use of quaternized chitosan-derivatives obtained by different synthetic paths in applications as antimicrobial agents.

Antiadhesive and antibacterial multilayer films via layer-by-layer assembly of TMC/heparin complexes.

N-Trimethyl chitosan (TMC), an antibacterial agent, and heparin (HP), an antiadhesive biopolymer, were alternately deposited on modified polystyrene films, as substrates, to built antiadhesive and antibacterial multilayer films. The properties of the multilayer films were investigated by Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and Kelvin force microscopy. In vitro studies of controlled release of HP were evaluated in simulated intestinal fluid and simulated gastric fluid. The initial adhesion test of E. coli on multilayer films surface showed effective antiadhesive properties. The in vitro antibacterial test indicated that the multilayer films of TMC/HP based on TMC80 can kill the E. coli bacteria. Therefore, antiadhesive and antibacterial multilayer films may have good potential for coatings and surface modification of biomedical applications.