Pancreatoduodenectomy Following Preoperative Biliary Drainage Using Endoscopic Ultrasound-Guided Choledochoduodenostomy Versus a Transpapillary Stent: A Multicenter Comparative Cohort Study of the ACHBT-FRENCH-SFED Intergroup.

BACKGROUND: It is unclear whether preoperative biliary drainage (PBD) by endoscopic retrograde cholangiopancreatography (ERCP) is equivalent to electrocautery-enhanced lumen-apposing metal stent (ECE-LAMS) before pancreatoduodenectomy (PD). METHODS: Patients who underwent PBD for distal malignant biliary obstruction (DMBO) followed by PD were retrospectively included in nine expert centers between 2015 and 2022. ERCP or endoscopic ultrasound-guided choledochoduodenostomy with ECE-LAMS were performed. In intent-to-treat analysis, patients drained with ECE-LAMS were considered the study group (first-LAMS group) and those drained with conventional transpapillary stent the control group (first-cannulation group). The rates of technical success, clinical success, drainage-related complications, surgical complications, and oncological outcomes were analyzed. RESULTS: Among 156 patients, 128 underwent ERCP and 28 ECE-LAMS in first intent. The technical and clinical success rates were 83.5% and 70.2% in the first-cannulation group versus 100% and 89.3% in the first-LAMS group (p = 0.02 and p = 0.05, respectively). The overall complication rate over the entire patient journey was 93.7% in first-cannulation group versus 92.0% in first-LAMS group (p = 0.04). The overall endoscopic complication rate was 30.5% in first-cannulation group versus 17.9% in first-LAMS group (p = 0.25). The overall complication rate after PD was higher in the first-cannulation group than in the first-LAMS group (92.2% versus 75.0%, p = 0.016). Overall survival and progression-free survival did not differ between the groups. CONCLUSIONS: PBD with ECE-LAMS is easier to deploy and more efficient than ERCP in patients with DMBO. It is associated with less surgical complications after pancreatoduodenectomy without compromising the oncological outcome.

High intraspecific variation of the cell surface physico-chemical and bioadhesion properties in Brettanomyces bruxellensis.

Brettanomyces bruxellensis is the most damaging spoilage yeast in the wine industry because of its negative impact on the wine organoleptic qualities. The strain persistence in cellars over several years associated with recurrent wine contamination suggest specific properties to persist and survive in the environment through bioadhesion phenomena. In this work, the physico-chemical surface properties, morphology and ability to adhere to stainless steel were studied both on synthetic medium and on wine. More than 50 strains representative of the genetic diversity of the species were considered. Microscopy techniques made it possible to highlight a high morphological diversity of the cells with the presence of pseudohyphae forms for some genetic groups. Analysis of the physico-chemical properties of the cell surface reveals contrasting behaviors: most of the strains display a negative surface charge and hydrophilic behavior while the Beer 1 genetic group has a hydrophobic behavior. All strains showed bioadhesion abilities on stainless steel after only 3 h with differences in the concentration of bioadhered cells ranging from 2.2 × 102 cell/cm2 to 7.6 × 106 cell/cm2. Finally, our results show high variability of the bioadhesion properties, the first step in the biofilm formation, according to the genetic group with the most marked bioadhesion capacity for the beer group.

Deep impact of the inactivation of the SecA2-only protein export pathway on the proteosurfaceome of Listeria monocytogenes.

Listeria monocytogenes presents a dimorphism associated to the SecA2 activity with cells having a normal rod shape or a dysmorphic elongated filamentous form. Besides variation of the cell and colony morphotype, this cell differentiation has profound ecophysiological and physiopathological implications with collateral effects on virulence and pathogenicity, biotope colonisation, bacterial adhesion and biofilm formation. This suggests the SecA2-only protein export could influence the listerial cell surface, which was investigated first by characterising its properties in L. monocytogenes wt and ΔsecA2. The degree of hydrophilicity and Lewis acid-base properties appeared significantly affected upon SecA2 inactivation. As modification of electrostatic properties would owe to modification in the composition of cell-surface proteins, the proteosurfaceome was further investigated by shotgun label-free proteomic analysis with a comparative relative quantitative approach. Following secretomic analysis, the protein secretion routes of the identified proteins were mapped considering the cognate transport and post-translocational maturation systems, as well as protein categories and subcellular localisation. Differential protein abundance profiles coupled to network analysis revealed the SecA2 dependence of 48 proteins, including some related to cell envelope biogenesis, translation and protein export, which could account for modifications of adhesion and surface properties of L. monocytogenes upon SecA2 inactivation. This investigation unravelled the profound influence of SecA2 activity on the cell surface properties and proteosurfaceome of L. monocytogenes, which provides advanced insights about its ecophysiopathology. SIGNIFICANCE: L. monocytogenes is a foodborne zoonotic pathogen and etiological agent of human listeriosis. This species presents a cellular dimorphism associated to the SecA2 activity that has profound physiopathological and ecophysiological implications with collateral effects on bacterial virulence and colonisation. To explore the influence of the SecA2-only protein export on the listerial cell, the surface properties of L. monocytogenes expressing or depleted of SecA2 was characterised by microelectrophoresis, microbial affinity to solvents and contact angles analyses. As modifications of hydrophilicity and Lewis acid-base electrostatic properties would owe to modification in the composition of cell-surface proteins, the proteinaceous subset of the surfaceome, i.e. the proteosurfaceome, was investigated further by shotgun label-free proteomic analysis. This subproteome appeared quite impacted upon SecA2 inactivation with the identification of proteins accounting for modifications in the cell surface properties. The profound influence of SecA2 activity on the cell surface of L. monocytogenes was unravelled, which provides advanced insights about its ecophysiopathology.

Extracellular Vesicles Mediate Communication between Endothelial and Vascular Smooth Muscle Cells.

The recruitment of pericytes and vascular smooth muscle cells (SMCs) that enwrap endothelial cells (ECs) is a crucial process for vascular maturation and stabilization. Communication between these two cell types is crucial during vascular development and in maintaining vessel homeostasis. Extracellular vesicles (EVs) have emerged as a new communication tool involving the exchange of microRNAs between cells. In the present study, we searched for microRNAs that could be transferred via EVs from ECs to SMCs and vice versa. Thanks to a microRNA profiling experiment, we found that two microRNAs are more exported in each cell type in coculture experiments: while miR-539 is more secreted by ECs, miR-582 is more present in EVs from SMCs. Functional assays revealed that both microRNAs can modulate both cell-type phenotypes. We further identified miR-539 and miR-582 targets, in agreement with their respective cell functions. The results obtained in vivo in the neovascularization model suggest that miR-539 and miR-582 might cooperate to trigger the process of blood vessel coverage by smooth muscle cells in a mature plexus. Taken together, these results are the first to highlight the role of miR-539 and miR-582 in angiogenesis and communication between ECs and SMCs.

Robust Grafting of Polyionenes: New Potent and Versatile Antimicrobial Surfaces.

Polyionenes (PI) with stable positive charges and tunable hydrophobic spacers in the polymer backbone, are shown to be particularly efficient regarding antimicrobial properties. This effect can be modulated since it increases with the length of hydrophobic spacers, i.e., the number of methylene groups between quaternary ammoniums. Now, to further explore these properties and provide efficient antimicrobial surfaces, polyionenes should be grafted onto materials. Here a robust grafting strategy to covalently attach polyionenes is described. The method consisted in a sequential surface chemistry procedure combining polydopamine coating, diazonium-induced polymerization, and polyaddition. To the best of knowledge, grafting of PI onto surfaces is not reported earlier. All chemical steps are characterized in detail via various surface analysis techniques (FTIR, X-ray photoelectron spectroscopy, contact angle, and surface energy measurements). The antibacterial properties of polyionene-grafted surfaces are then studied through bacterial adhesion experiments consisting in enumeration of adherent bacteria (total and viable cultivable cells). PI-grafted surfaces are showed to display effective and versatile bacteriostatic/bactericidal properties associated with a proadhesive effect.

Visual hallucinations and illusions in Parkinson's disease: the role of ocular pathology.

INTRODUCTION: Whether different mechanisms, particularly ocular pathology, could lead to the emergence of visual hallucinations (VH) (defined as false perceptions with no external stimulus) versus visual illusions (VI) (defined as a misperception of a real stimulus) in Parkinson's disease (PD) remains debated. We assessed retinal, clinical and structural brain characteristics depending on the presence of VH or VI in PD. METHODS: In this case-control study, we compared retinal thickness using optical coherence tomography (OCT), between PD patients with: VI (PD-I; n = 26), VH (PD-H; n = 28), and without VI or VH (PD-C; n = 28), and assessed demographic data, disease severity, treatment, anatomical and functional visual complaints, cognitive and visuo-perceptive functions and MRI brain volumetry for each group of PD patients. RESULTS: Parafoveal retina was thinner in PD-H compared to PD-C (p = 0.005) and PD-I (p = 0.009) but did not differ between PD-I and PD-C (p = 0.85). Multivariate analysis showed that 1/retinal parafoveal thinning and total brain gray matter atrophy were independently associated with the presence of VH compared to PD-I; 2/retinal parafoveal thickness, PD duration, sleep quality impairment and total brain gray matter volume were independent factors associated with the presence of VH compared to PD-C; 3/anterior ocular abnormalities were the only factor independently associated with the presence of illusions compared to PD-C. CONCLUSION: These findings reinforce the hypothesis that there may be different mechanisms contributing to VH and VI in PD, suggesting that these two entities may also have a different prognosis rather than simply lying along a continuous spectrum. REGISTRATION NUMBER: Clinicaltrials.gov number NCT01114321.

Antibiofilm activity in the culture supernatant of a marine Pseudomonas sp. bacterium.

In the marine environment, most solid surfaces are covered by microbial biofilms, mainly composed of bacteria and diatoms. The negative effects of biofilms on materials and equipment are numerous and pose a major problem for industry and human activities. Since marine micro-organisms are an important source of bioactive metabolites, it is possible that they synthesize natural ecofriendly molecules that inhibit the adhesion of organisms. In this work, the antibiofilm potential of marine bacteria was investigated using Flavobacterium sp. II2003 as a target. This strain is potentially a pioneer strain of bacteria that was previously selected from marine biofilms for its strong biofilm-forming ability. The culture supernatants of 86 marine heterotrophic bacteria were tested for their ability to inhibit Flavobacterium sp. II2003 biofilm formation and the Pseudomonas sp. IV2006 strain was identified as producing a strong antibiofilm activity. The Pseudomonas sp. IV2006 culture supernatant (SNIV2006) inhibited Flavobacterium sp. II2003 adhesion without killing the bacteria or inhibiting its growth. Moreover, SNIV2006 had no effect on the Flavobacterium sp. II2003 cell surface hydrophilic/hydrophobic and general Lewis acid-base characteristics, but modified the surface properties of glass, making it on the whole more hydrophilic and more alkaline and significantly reducing bacterial cell adhesion. The glass-coating molecules produced by Pseudomonas sp. IV2006 were found to probably be polysaccharides, whereas the antibiofilm molecules contained in SNIV2006 and acting during the 2 h adhesion step on glass and polystyrene surfaces would be proteinaceous. Finally, SNIV2006 exhibited a broad spectrum of antibiofilm activity on other marine bacteria such as Flavobacterium species that are pathogenic for fish, and human pathogens in both the medical environment, such as Staphylococcus aureus and Pseudomonas aeruginosa, and in the food industry, such as Yersinia enterocolitica. Thus, a wide range of applications could be envisaged for the SNIV2006 compounds, both in aquaculture and human health.

Compositional Engineering of a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) Nanocomposite Cathodes for Protonic Ceramic Fuel Cells.

Compositionally engineered a La1-xBaxCoO3-δ-(1-a) BaZr0.9Y0.1O2.95 (a = 0.6, 0.7, 0.8 and x = 0.5, 0.6, 0.7) (LBZ) nanocomposite cathodes were prepared by oxidation driven in situ exsolution of a single-phase material deposited on a BaZr0.9Y0.1O2.95 electrolyte. The processing procedure of the cathode was optimized by reducing the number of thermal treatments as the single-phase precursor was deposited directly on the electrolyte. The exsolution and firing of the cathodes occurred in one step. The electrochemical performance of symmetrical cells with the compositionally engineered cathodes was investigated by impedance spectroscopy in controlled atmospheres. The optimized materials processing gave web-like nanostructured cathodes with superior electrochemical performance for all compositions. The area specific resistances obtained were all below 12 Ω·cm2 at 400 °C and below 0.59 Ω·cm2 at 600 °C in 3% moist synthetic air. The resistances of the nominal 0.6 La0.5Ba0.5CoO3-δ-0.4 BaZr0.9Y0.1O2.95 and 0.8 La0.5Ba0.5CoO3-δ-0.2 BaZr0.9Y0.1O2.95 composite cathodes were among the lowest reported for protonic ceramic fuel cells cathodes in symmetrical cell configuration with ASR equal to 4.04 and 4.84 Ω·cm2 at 400 °C, and 0.21 and 0.27 Ω·cm2 at 600 °C, respectively.

Factors Limiting the Apparent Hydrogen Flux in Asymmetric Tubular Cercer Membranes Based on La27W3.5Mo1.5O55.5-δ and La0.87Sr0.13CrO3-δ.

Asymmetric tubular ceramic-ceramic (cercer) membranes based on La27W3.5Mo1.5O55.5-δ-La0.87Sr0.13CrO3-δ were fabricated by a two-step firing method making use of water-based extrusion and dip-coating. The performance of the membranes was characterized by measuring the hydrogen permeation flux and water splitting with dry and wet sweep gases, respectively. To explore the limiting factors for hydrogen and oxygen transport in the asymmetric membrane architecture, the effect of different gas flows and switching the feed and sweep sides of the membrane on the apparent hydrogen permeability was investigated. A dusty gas model was used to simulate the gas gradient inside the porous support, which was combined with Wagner diffusion calculations of the dense membrane layer to assess the overall transport across the asymmetric membrane. In addition, the stability of the membrane was investigated by means of flux measurements over a period of 400 h.

Mixed proton and electron conducting double perovskite anodes for stable and efficient tubular proton ceramic electrolysers.

Hydrogen production from water electrolysis is a key enabling energy storage technology for the large-scale deployment of intermittent renewable energy sources. Proton ceramic electrolysers (PCEs) can produce dry pressurized hydrogen directly from steam, avoiding major parts of cost-driving downstream separation and compression. However, the development of PCEs has suffered from limited electrical efficiency due to electronic leakage and poor electrode kinetics. Here, we present the first fully operational BaZrO3-based tubular PCE, with 10 cm2 active area and a hydrogen production rate above 15 Nml min-1. The novel steam anode Ba1-xGd0.8La0.2+xCo2O6-δ exhibits mixed p-type electronic and protonic conduction and low activation energy for water splitting, enabling total polarization resistances below 1 Ω cm2 at 600 °C and Faradaic efficiencies close to 100% at high steam pressures. These tubular PCEs are mechanically robust, tolerate high pressures, allow improved process integration and offer scale-up modularity.

Lavender Decline in France Is Associated with Chronic Infection by Lavender-Specific Strains of "Candidatus Phytoplasma solani".

Lavender decline compromises French lavender production, and preliminary data have suggested the involvement of "Candidatus Phytoplasma solani" in the etiology of the disease. In order to evaluate the epidemiological role of "Ca Phytoplasma solani," a 3-year survey was conducted in southeastern France. "Ca Phytoplasma solani" was detected in 19 to 56% of the declining plants, depending on seasons and cultivars, and its prevalence was correlated with symptom severity. Autumn was more favorable than spring for phytoplasma detection, and "Ca Phytoplasma solani" incidence was higher in Lavandula angustifolia than in Lavandula intermedia hybrids. Detection of the phytoplasma fluctuated over months, supporting the chronicity of infection. Three "Ca Phytoplasma solani" secY genotypes, S17, S16, and S14, were the most prevalent in lavender fields and were also detected in nurseries, whereas strains detected in surrounding bindweed and wild carrots were mostly of the S1 and S4 genotypes. This suggests that lavender is the main pathogen reservoir of the epidemic. Adults and nymphs of the planthopper vector Hyalesthes obsoletus were commonly captured in lavender fields and were shown to harbor mainly the prevalent phytoplasma genotypes detected in lavenders. The "Ca Phytoplasma solani" genotype S17 was transmitted to Catharanthus roseus periwinkle by naturally infected H. obsoletus Finally, the inventory of the bacterial community of declining lavenders that tested negative for "Ca Phytoplasma solani" by 16S rRNA deep sequencing ruled out the involvement of other phloem-limited bacterial pathogens.IMPORTANCE The etiology and main pathways for the spread of lavender decline, an infectious disease affecting French lavender production since the 1960s, have remained unclear, hampering the development of efficient control strategies. An extensive survey of lavender fields led to the conclusion that "Candidatus Phytoplasma solani" was chronically infecting declining lavenders and was associated with large infectious populations of Hyalesthes obsoletus planthoppers living on the crop itself. Lavender appeared to be the main reservoir host for lavender-specific phytoplasma strains, an unusual feature for this phytoplasma, which usually propagates from reservoir weeds to various economically important crops. These results point out the necessity to protect young lavender fields from the initial phytoplasma inoculum coming from surrounding lavender fields or from infected nurseries and to promote agricultural practices that reduce the development of H. obsoletus vector populations.

Proteomic Response of Pseudomonas aeruginosa PAO1 Adhering to Solid Surfaces.

Pseudomonas aeruginosa is a pathogenic micro-organism responsible for many hospital-acquired infections. It is able to adhere to solid surfaces and develop an immobilized community or so-called biofilm. Many studies have been focusing on the use of specific materials to prevent the formation of these biofilms, but the reactivity of the bacteria in contact to surfaces remains unknown. The aim of this study was to evaluate the impact of the abiotic surface on the physiology of adherent bacteria. Three different materials, stainless steel (SS), glass (G), and polystyrene (PS) that were relevant to industrial or medical environments were characterized at the physicochemical level in terms of their hydrophobicity and roughness. We showed that SS was moderately hydrophilic and rough, potentially containing crevices, G was hydrophilic and smooth while PS was hydrophobic and smooth. We further showed that P. aeruginosa cells were more likely able to adhere to SS and G rather than PS surfaces under our experimental conditions. The physiological response of P. aeruginosa when adhering to each of these materials was then evaluated by global proteomic analysis. The abundance of 70 proteins was shown to differ between the materials suggesting that their abundance was modified as a function of the material to which bacteria adhered. Our data lead to enabling the identification of abundance patterns that appeared to be specific to a given surface. Taken together, our data showed that P. aeruginosa is capable of sensing and responding to a surface probably via specific programmes to adapt its physiological response accordingly.

The design of superhydrophobic stainless steel surfaces by controlling nanostructures: A key parameter to reduce the implantation of pathogenic bacteria.

Reducing bacterial adhesion on substrates is fundamental for various industries. In this work, new superhydrophobic surfaces are created by electrodeposition of hydrophobic polymers (PEDOT-F4 or PEDOT-H8) on stainless steel with controlled topographical features, especially at a nano-scale. Results show that anti-bioadhesive and anti-biofilm properties require the control of the surface topographical features, and should be associated with a low adhesion of water onto the surface (Cassie-Baxter state) with limited crevice features at the scale of bacterial cells (nano-scale structures).

Myoferlin is a novel exosomal protein and functional regulator of cancer-derived exosomes.

Exosomes are communication mediators participating in the intercellular exchange of proteins, metabolites and nucleic acids. Recent studies have demonstrated that exosomes are characterized by a unique proteomic composition that is distinct from the cellular one. The mechanisms responsible for determining the proteome content of the exosomes remain however obscure. In the current study we employ ultrastructural approach to validate a novel exosomal protein myoferlin. This is a multiple C2-domain containing protein, known for its conserved physiological function in endocytosis and vesicle fusion biology. Emerging studies demonstrate that myoferlin is frequently overexpressed in cancer, where it promotes cancer cell migration and invasion. Our data expand these findings by showing that myoferlin is a general component of cancer cell derived exosomes from different breast and pancreatic cancer cell lines. Using proteomic analysis, we demonstrate for the first time that myoferlin depletion in cancer cells leads to a significantly modulated exosomal protein load. Such myoferlin-depleted exosomes were also functionally deficient as shown by their reduced capacity to transfer nucleic acids to human endothelial cells (HUVEC). Beyond this, myoferlin-depleted cancer exosomes also had a significantly reduced ability to induce migration and proliferation of HUVEC. The present study highlights myoferlin as a new functional player in exosome biology, calling for novel strategies to target this emerging oncogene in human cancer.

Dual phase high-temperature membranes for CO2 separation - performance assessment in post- and pre-combustion processes.

Dual phase membranes are highly CO2-selective membranes with an operating temperature above 400 °C. The focus of this work is to quantify the potential of dual phase membranes in pre- and post-combustion CO2 capture processes. The process evaluations show that the dual phase membranes integrated with an NGCC power plant for CO2 capture are not competitive with the MEA process for post-combustion capture. However, dual phase membrane concepts outperform the reference Selexol technology for pre-combustion CO2 capture in an IGCC process. The two processes evaluated in this work, post-combustion NGCC and pre-combustion IGCC, represent extremes in CO2 partial pressure fed to the separation unit. Based on the evaluations it is expected that dual phase membranes could be competitive for post-combustion capture from a pulverized coal fired power plant (PCC) and pre-combustion capture from an Integrated Reforming Cycle (IRCC).

The interaction of uPAR with VEGFR2 promotes VEGF-induced angiogenesis.

In endothelial cells, binding of vascular endothelial growth factor (VEGF) to the receptor VEGFR2 activates multiple signaling pathways that trigger processes such as proliferation, survival, and migration that are necessary for angiogenesis. VEGF-bound VEGFR2 becomes internalized, which is a key step in the proangiogenic signal. We showed that the urokinase plasminogen activator receptor (uPAR) interacted with VEGFR2 and described the mechanism by which this interaction mediated VEGF signaling and promoted angiogenesis. Knockdown of uPAR in human umbilical vein endothelial cells (HUVECs) impaired VEGFR2 signaling, and uPAR deficiency in mice prevented VEGF-induced angiogenesis. Upon exposure of HUVECs to VEGF, uPAR recruited the low-density lipoprotein receptor-related protein 1 (LRP-1) to VEGFR2, which induced VEGFR2 internalization. Thus, the uPAR-VEGFR2 interaction is crucial for VEGF signaling in endothelial cells.

Modification of the bacterial adhesion of Staphylococcus aureus by antioxidant blooming on polyurethane films.

Medical device-related infections are a major problem in hospital. The risk of developing an infection is linked to the bacterial adhesion ability of pathogen strains on the device and their ability to form a biofilm. Here we focused on polymer surfaces exhibiting a blooming of antioxidant (Irganox 3114® and Irganox 1076®) on their surface. We tried to put into evidence the effect of such a phenomenon on the bacterial adhesion in terms of number of viable cultivable bacteria and bacteria localization on the surface. We showed that the blooming has a tendency to increase the Staphylococcus aureus adhesion phenomenon in part for topographic reasons.

Flagella but not type IV pili are involved in the initial adhesion of Pseudomonas aeruginosa PAO1 to hydrophobic or superhydrophobic surfaces.

Over the last decades, surface biocontamination has become a major concern in food industries and medical environments where its outcomes could vary from financial losses to public health issues. Understanding adhesion mechanisms of involved microorganisms is essential to develop new strategies of prevention and control. Adhesion of Pseudomonas aeruginosa, a nosocomial pathogenic bacterium, relies on several bacterial features, among which are bacterial appendages such as flagella and type IV pili. Here, we examine the role of P. aeruginosa PAO1 flagella and type IV pili in the adhesion to abiotic surfaces with various hydrophobicities. Adhesion kinetics showed, that after 60min, flagella increased the adhesion of the strain to surfaces with high hydrophobicity while no effect was observed on hydrophilic surfaces. Flagella of adherent bacteria exhibited specific and conserved pattern on the surfaces that suggested a higher affinity of flagella for hydrophobic surfaces. Based on these results and on previous studies in the literature, we proposed a model of flagella-mediated adhesion onto hydrophobic surfaces where these appendages induce the first contact and promote the adhesion of the bacterial body. These findings suggest that anti-bioadhesive surface design should take into consideration the presence of bacterial appendages.

Inverse Gas Chromatography with Film Cell Unit: An Attractive Alternative Method to Characterize Surface Properties of Thin Films.

Inverse gas chromatography (IGC) is widely used for the characterization of surfaces. The present work describes a novel IGC tool, the recently developed film cell module, which measures monolithic thin solid film surface properties, whereas only samples in powder or fiber state or polymer-coated supports can be studied by classic IGC. The surface energy of four different solid supports was measured using both classic IGC with columns packed with samples in the powder state, and IGC with the new film cell module or the sessile drop technique, using samples in the film state. The total surface energy and its dispersive and specific components were measured for glass, polyethylene, polyamide and polytetrafluoroethylene. Similar results were obtained for the four materials using the three different techniques. The main conclusion is that the new film cell module for IGC is an attractive alternative to the sessile drop technique as it gives very accurate and reproducible results for surface energy components, with significant savings in time and the possible control of sample humidity and temperature. This film cell module for IGC extends the application field of IGC to any thin solid film and can be used to study the effect of any surface treatment on surface energy.