Alkali-Activated Cements for TES Materials in Buildings' Envelops Formulated With Glass Cullet Recycling Waste and Microencapsulated Phase Change Materials.

Within the thermal energy storage field, one of the main challenges of this study is the development of new enhanced heat storage materials to be used in the building sector. The purpose of this study is the development of alkali-activated cements (AACs) with mechanical properties to store high amounts of heat. These AACs incorporate wastes from industrial glass process as well as microencapsulated phase change materials (mPCMs) to improve the thermal inertia of building walls, and accordingly respective energy savings. The research presented below consists of the exhaustive characterization of different AACs formulated from some waste generated during the proper management of municipal waste used as precursor. In this case study, AACs were formulated with the waste generated during the recycling of glass cullet, namely ceramic, stone, and porcelain (CSP), which is embedding a mPCM. The addition of mPCM was used as thermal energy storage (TES) material. The mechanical properties were also evaluated in order to test the feasibility of the use of the new formulated materials as a passive TES system. The results showed that the AAC obtained from CSP (precursors) mixed with mPCMs to obtain a thermal regulator material to be implemented in building walls was reached successfully. The material developed was resistant enough to perform as insulating panels. The formulated materials had high storage capacity depending on the PCM content. The durability of the mPCM shell was studied in contact with alkaline medium (NaOH 4 M) and no degradation was confirmed. Moreover, the higher the content of mPCM, the lower the mechanical properties expected, due to the porosity increments with mPCM incorporation in the formulations.

Cork as a sustainable carbon source for nature-based solutions treating hydroponic wastewaters - Preliminary batch studies.

Reusing by-products is an important strategy to ensure the preservation of natural capital and climate change mitigation. This study aimed at evaluating the potential of cork granulates, a by-product of winery industry, as an organic carbon (OC) source for the treatment of hydroponic wastewaters. First, chemical characterization was performed and discussed. Secondly, batch studies were performed using synthetic hydroponic wastewater to understand the role of particle size (PS), pH and contact time (CT) on the release of OC. The suberin is the major compound, representing >50%. It was noticed that a variance on the content of suberin across species, within the same species and depending on the extraction part (belly, cork and back) could be expected. >60% of the sample is composed by carbon while <1% was nitrogen (high C:N ratio), indicating a low risk of releasing organic nitrogen. The statistical results suggested that the main effect of PS on the release of OC is greater than both, CT and pH. The chemical release of OC gets slower with time, being this effect greater as the PS increase. Moreover, estimations showed that using the 4 mm PS, the amount of water treated would be twice the amount if the 8 mm PS had been used. The PS seems to play an important role at design nature-based solutions (NBS) focused on denitrification. The surface response methodology indicates a significant negative interaction between CT and PS suggesting that the mathematical model could be used for further optimization studies. The reuse of organic by-products as filter media seems to be an economic and environmentally friendly alternative to enhance denitrification in NBS, while preserving natural capital. However, further real scale and long-term experiments are needed to validate cork's potential as an "internal" OC source for NBS.