Physical and chemical parameters determining the formation of gold-sp metal (Al, Ga, In, and Pb) nanoalloys.

Alloying is a key step towards the fabrication of advanced and unique nanomaterials demanded by the next generation of nanotechnology solutions. In particular, the alloys of Au with the sp-metals are expected to have several appealing plasmonic and electronic properties for a wide range of applications in optics, catalysis, nanomedicine, sensing and quantum devices. However, little is known about the thermodynamic and synthetic factors leading to the successful alloying of Au and sp-metals at the nanoscale. In this work, Au-M nanoalloys, with M = Al, Ga, In, or Pb, have been synthesized by a green and single step laser ablation in liquid (LAL) approach in two environments (pure ethanol and anhydrous acetone). To delve deeper into the key parameters leading to successful alloying under the typical operating conditions of LAL, a multiparametric analysis was performed considering the mixing enthalpy from DFT calculations and other alloying descriptors such as the Hume-Rothery parameters. The results showed that the dominant factors for alloying change dramatically with the oxidative ability of the synthesis environment. In this way, the tendency of the four sp metals to alloy with gold was accurately predicted (R2 > 0.99) using only two and three parameters in anhydrous and non-anhydrous environments, respectively. These results are important to produce nanoalloys using LAL and other physical methods because they contribute to the understanding of factors leading to element mixing at the nanoscale under real synthetic conditions, which is crucial for guiding the realization of next-generation multifunctional metallic nanostructures.

Accurate prediction of the optical properties of nanoalloys with both plasmonic and magnetic elements.

The alloying process plays a pivotal role in the development of advanced multifunctional plasmonic materials within the realm of modern nanotechnology. However, accurate in silico predictions are only available for metal clusters of just a few nanometers, while the support of modelling is required to navigate the broad landscape of components, structures and stoichiometry of plasmonic nanoalloys regardless of their size. Here we report on the accurate calculation and conceptual understanding of the optical properties of metastable alloys of both plasmonic (Au) and magnetic (Co) elements obtained through a tailored laser synthesis procedure. The model is based on the density functional theory calculation of the dielectric function with the Hubbard-corrected local density approximation, the correction for intrinsic size effects and use of classical electrodynamics. This approach is built to manage critical aspects in modelling of real samples, as spin polarization effects due to magnetic elements, short-range order variability, and size heterogeneity. The method provides accurate results also for other magnetic-plasmonic (Au-Fe) and typical plasmonic (Au-Ag) nanoalloys, thus being available for the investigation of several other nanomaterials waiting for assessment and exploitation in fundamental sectors such as quantum optics, magneto-optics, magneto-plasmonics, metamaterials, chiral catalysis and plasmon-enhanced catalysis.

Effect of Formic Acid on the Outdiffusion of Ti Interstitials at TiO2 Surfaces: A DFT+U Investigation.

Ti interstitials play a key role in the surface chemistry of TiO2. However, because of their elusive behavior, proof of their participation in catalytic processes is difficult to obtain. Here, we used DFT+U calculations to investigate the interaction between formic acid (FA) and excess Ti atoms on the rutile-TiO2(110) and anatase-TiO2(101) surfaces. The excess Ti atoms favor FA dissociation, while decreasing the relative stability of the bidentate bridging coordination over the monodentate one. FA species interact significantly with the Ti interstitials, favoring their outdiffusion. Eventually, Ti atoms can emerge at the surface forming chelate species, which are more stable than monodentate FA species in the case of rutile, and are even energetically favored in the case of anatase. The presence of Ti adatoms that can directly participate to surface processes should then be considered when formic acid and possibly carboxylate-bearing species are adsorbed onto TiO2 particles.

Recent Developments in Plasmonic Alloy Nanoparticles: Synthesis, Modelling, Properties and Applications.

Despite the traditional plasmonic materials are counted on one hand, there are a lot of possible combinations leading to alloys with other elements of the periodic table, in particular those renowned for magnetic or catalytic properties. It is not a surprise, therefore, that nanoalloys are considered for their ability to open new perspectives in the panorama of plasmonics, representing a leading research sector nowadays. This is demonstrated by a long list of studies describing multiple applications of nanoalloys in photonics, photocatalysis, sensing and magneto-optics, where plasmons are combined with other physical and chemical phenomena. In some remarkable cases, the amplification of the conventional properties and even new effects emerged. However, this field is still in its infancy and several challenges must be overcome, starting with the synthesis (control of composition, crystalline order, size, processability, achievement of metastable phases and disordered compounds) as well as the modelling of the structure and properties (accuracy of results, reliability of structural predictions, description of disordered phases, evolution over time) of nanoalloys. To foster the research on plasmonic nanoalloys, here we provide an overview of the most recent results and developments in the field, organized according to synthetic strategies, modelling approaches, dominant properties and reported applications. Considering the several plasmonic nanoalloys under development as well as the large number of those still awaiting synthesis, modelling, properties assessment and technological exploitation, we expect a great impact on the forthcoming solutions for sustainability, ultrasensitive and accurate detection, information processing and many other fields.

On surface chemical reactions of free-base and titanyl porphyrins with r-TiO2(110): a unified picture.

In this Perspective we present a comprehensive study of the multiple reaction products of metal-free porphyrins (2H-Ps) in contact with the rutile TiO2(110) surface. In the absence of peripheral functionalization with specific linkers, the porphyrin adsorption is driven by the coordination of the two pyrrolic nitrogen atoms of the macrocycle to two consecutive oxygen atoms of the protruding Obr rows via hydrogen bonding. This chemical interaction favours the iminic nitrogen uptake of hydrogen from near surface layers at room temperature, thus yielding a stable acidic porphyrin (4H-P). In addition, a mild annealing (∼100 °C) triggers the incorporation of a Ti atom in the porphyrin macrocycle (self-metalation). We recently demonstrated that such a low temperature reaction is driven by a Lewis base iminic attack, which lowers the energy barriers for the outdiffusion of Ti interstitial atoms (Tiint) [Kremer et al., Appl. Surf. Sci., 2021, 564, 150403]. In the monolayer (ML) range, the porphyrin adsorption site, corresponding to a TiO-TPP configuration, is extremely stable and tetraphenyl-porphyrins (TPPs) may even undergo conformational distortion (flattening) by partial cyclo-dehydrogenation, while remaining anchored to the O rows up to 450 °C [Lovat et al., Nanoscale, 2017, 9, 11694]. Here we show that, upon self-metalation, isolated molecules at low coverage may jump atop the rows of five-fold coordinated Ti atoms (Ti5f). This configuration is associated with the formation of a new coordination complex, Ti-O-Ti5f, as determined by comparison with the deposition of pristine titanyl-porphyrin (TiO-TPP) molecules. The newly established Ti-O-Ti5f anchoring configuration is found to be stable also beyond the TPP flattening reaction. The anchoring of TiO-TPP to the Ti5f rows is, however, susceptible to the cross-talk between phenyls of adjacent molecules, which ultimately drives the TiO-TPP temperature evolution in the ML range along the same pathway followed by 2H-TPP.

Water-Soluble [Tc(N)(PNP)] Moiety for Room-Temperature 99mTc Labeling of Sensitive Target Vectors.

The incorporation of bioactive molecules into a water-soluble [99mTc][Tc(N)(PNP)]-based mixed compound is described. The method, which exploits the chemical properties of the new [99mTc][Tc(N)(PNP3OH)]2+ synthon [PNP3OH = N,N-bis(di-hydroxymethylenphosphinoethyl)methoxyethylamine], was successfully applied to the labeling of small, medium (cysteine-functionalized biotin and c-RGDfK pentapeptide), and large molecules. Apomyoglobin was chosen as a model protein and derivatized via site-specific enzymatic reaction catalyzed by transglutaminase (TGase) with the H-Cys-Gly-Lys-Gly-OH tetrapeptide for the insertion in the protein sequence of a reactive N-terminal Cys for 99mTc chelation. Radiosyntheses were performed under physiological conditions at room temperature within 30 min. They were reproducible, highly specific, and quantitative. Heteroleptic complexes are hydrophilic and stable. Biodistributions of the selected compounds show favorable pharmacokinetics within 60 min post-injection and predominant elimination through the renal-urinary pathway. In a wider perspective, these data suggest a role of the [99mTc][Tc(N)(PNP)] technology in the labeling of temperature-sensitive biomolecules, especially targeting proteins for SPECT imaging.

Facile synthesis by laser ablation in liquid of nonequilibrium cobalt-silver nanoparticles with magnetic and plasmonic properties.

Appealing physical and chemical properties are foreseen in nanoparticles containing immiscible elements, despite their synthesis is challenging due to the unfavorable thermodynamics. Here we show that silver nanoparticles doped with Co can be achieved by a facile one-step route relying on laser ablation in liquid. Structural analysis suggests that the bimetallic nanoparticles consist of a matrix of face-centred cubic Ag rich of cobalt as point defects or dislocations, in a structure that is stable over time even in aqueous solution. This happens despite the complete immiscibility of the two metals at any temperature in the solid and liquid phase, as confirmed also by density functional theory calculations. The nonequilibrium Co-Ag nanoparticles benefit of silver features such as the plasmonic response and the easy surface chemistry with thiolated ligands, combined with the magnetic properties of cobalt. Importantly, plasmonics and magnetism are not quenched after mixing, contrary to what was observed in other bimetallic systems like the Au-Fe one. This opens the way to several technologically relevant applications and, as a proof of concept, we demonstrate magnetophoretic assembly of Co-Ag nanoparticles into arrays of plasmonic dots exploitable for surface-enhanced Raman spectroscopy.

4D Multimodal Nanomedicines Made of Nonequilibrium Au-Fe Alloy Nanoparticles.

Several examples of nanosized therapeutic and imaging agents have been proposed to date, yet for most of them there is a low chance of clinical translation due to long-term in vivo retention and toxicity risks. The realization of nanoagents that can be removed from the body after use remains thus a great challenge. Here, we demonstrate that nonequilibrium gold-iron alloys behave as shape-morphing nanocrystals with the properties of self-degradable multifunctional nanomedicines. DFT calculations combined with mixing enthalpy-weighted alloying simulations predict that Au-Fe solid solutions can exhibit self-degradation in an aqueous environment if the Fe content exceeds a threshold that depends upon element topology in the nanocrystals. Exploiting a laser-assisted synthesis route, we experimentally confirm that nonequilibrium Au-Fe nanoalloys have a 4D behavior, that is, the ability to change shape, size, and structure over time, becoming ultrasmall Au-rich nanocrystals. In vivo tests show the potential of these transformable Au-Fe nanoalloys as efficient multimodal contrast agents for magnetic resonance imaging and computed X-ray absorption tomography and further demonstrate their self-degradation over time, with a significant reduction of long-term accumulation in the body, when compared to benchmark gold or iron oxide contrast agents. Hence, Au-Fe alloy nanoparticles exhibiting 4D behavior can respond to the need for safe and degradable inorganic multifunctional nanomedicines required in clinical translation.

Versatile Nature of Oxygen Vacancies in Bismuth Vanadate Bulk and (001) Surface.

Bismuth vanadate (BiVO4) has emerged as one of the most promising photoanode materials for solar fuel production. Oxygen vacancies play a pivotal role in the photoelectrochemical efficiency, yet their electronic nature and contribution to  n-type conductivity are still under debate. Using first-principles calculations, we show that oxygen vacancies in BiVO4 have two distinguishable geometric configurations characterized by either undercoordinated, reduced VIVO3 and BiIIO7 subunits or a VIV-O-VIV/V bridge (split vacancy), quenching the oxygen vacancy site. While both configurations have similar energies in the bulk, the (001) subsurface acts like an energetic sink that stabilizes the split oxygen vacancy by ∼1 eV. The barrierless creation of a bridging V2O7 unit allows for partial electron delocalization throughout the near-surface region, consistent with recent experimental observations indicating that BiVO4(001) is an electron-rich surface.

Electronic Structure-Dependent Surface Plasmon Resonance in Single Au-Fe Nanoalloys.

The relationship between composition and plasmonic properties in noble metal nanoalloys is still largely unexplored. Yet, nanoalloys of noble metals, such as gold, with transition elements, such as iron, have unique properties and a number of potential applications, ranging from nanomedicine to magneto-plasmonics and plasmon-enhanced catalysis. Here, we investigate the localized surface plasmon resonance at the level of the single Au-Fe nanoparticle by applying a strategy that combines experimental measurements using near field electron energy loss spectroscopy with theoretical studies via a full wave numerical analysis and density functional theory calculations of electronic structure. We show that, as the iron fraction increases, the plasmon resonance is blue-shifted and significantly damped, as a consequence of the changes in the electronic band structure of the alloy. This allows the identification of three relevant phenomena to be considered in the design and realization of any plasmonic nanoalloy, specifically: the appearance of new states around the Fermi level; the change in the free electron density of the metal; and the blue shift of interband transitions. Overall, this study provides new opportunities for the control of the optical response in Au-Fe and other plasmonic nanoalloys, which are useful for the realization of magneto-plasmonic devices for molecular sensing, thermo-plasmonics, bioimaging, photocatalysis, and the amplification of spectroscopic signals by local field enhancement.

Very high temperature tiling of tetraphenylporphyrin on rutile TiO2(110).

We demonstrate the thermal stability up to 450 °C of a titanium(iv)-porphyrin monolayer grown on the rutile TiO2(110) surface. Starting from a film of metal-free tetra-phenyl-porphyrin, 2HTPP, deposited at room temperature, we show that, beyond the self-metalation reaction at 150°-200 °C, a second phase transition takes place at ∼350 °C. Using surface diffraction and microscopy, we observe a change of the phase symmetry from (2 × 4)-obliq to (2 × 6)-rect. Core level photoemission indicates that the chemical states of both the molecular tetrapyrrolic macrocycle and the substrate are unchanged. X-ray absorption spectroscopy reveals that the driving mechanism is a rotation of the phenyl terminations towards the substrate (flattening) that triggers a conformational change of the molecule through partial cyclo-dehydrogenation. From comparison with first principles calculations, we show that the common feature of these multiple phase transitions is the chemical nature of the porphyrin bonding atop the substrate oxygen rows: the coordination of the macrocycle central pocket to the oxygen atoms beneath is preserved throughout both the self-metalation and flattening reactions. The molecular orientation and arrangement are determined by steric constraints and intermolecular interactions, whereas the specific adsorption site is further stabilized by the interaction of the peripheral C-H network with the adjacent oxygen rows. Porphyrins are thus trapped at the TiO2(110) surface, where they demonstrate an exceptionally high thermal stability (up to ∼450 °C), which makes this interface potentially useful for sensors and photocatalysis applications in harsh environments.

Interaction products of cytotoxic Cu(I) complexes with different solvent mixtures: an electrospray ionization mass spectrometry and density functional theory study.

RATIONALE: [Cu(P)4 ][BF4 ]-type complexes (P = tertiary phosphine) have shown significant antitumor activity. This biological property appears to be activated via formation of coordinative unsaturated [Cu(P)n ]+ species (n < 4), that may interact with various molecules starting from the solvent(s) in which they are dissolved. Aim of our study was to investigate the interaction of these species with different solvent mixtures. METHODS: The interaction has been investigated by electrospray ionization mass spectrometry, and the interaction products have been characterized by multiple collisional experiments, using an ion trap mass instrument. Density functional theory (DFT) calculation studies, using a meta-hybrid exchange correlation (xc) functional and an implicit solvent model, were employed to investigate the equilibrium distribution of species in solution. RESULTS: Depending on the nature of the solvent mixture and coordinated phosphine, three [Cu(P)4 ][BF4 ]-type complexes undergo dissociation with formation of [Cu(P)2 ]+ , [Cu(P)(solv)]+ and [Cu(solv)2 ]+ species (solv = solvent). Preferred collisional-induced fragmentation pathways provide qualitative information on the selectivity of [Cu(P)n ]+ for specific solvents and donor atoms. Formation free energies and equilibrium constants pertaining to [CuI (PTA)n ]+ , [CuI/II (solv)n ]m+ (n ≤ 4; m = 1, 2) and [CuI (PTA)2-k (sol)k ]+ (k = 1, 2) provide a comprehensive picture of equilibria in solution. CONCLUSIONS: Dimethyl sulfoxide (DMSO) and acetonitrile (MeCN) strongly affect [Cu(P)n ]+ assemblies producing mixed-ligand [Cu(P)(DMSO)]+ and [Cu(P)(MeCN)]+ species. Excess of both DMSO and MeCN solvents are able to fully displace coordinated phosphines giving [Cu(solv)2 ]+ -type adducts. The presence of phosphines in the native complex is mandatory to retain the reduced oxidation state of copper. Instead, the more labile [CuI (MeCN)4 ]+ complex dissolved in DMSO and MeCN displays a combination of Cu(I) and Cu(II) adducts. Copyright © 2016 John Wiley & Sons, Ltd.

Hydrogen capture by porphyrins at the TiO2(110) surface.

Metal-free porphyrin molecules adsorb on the rutile TiO2(110) surface with their pyrrolic nitrogen atoms atop the O-bridge rows, whereas the iminic nitrogen atoms capture two additional hydrogen atoms. Hydrogenation occurs spontaneously at room temperature, irrespective of the distance of the polypyrrolic macrocycle from the surface, as varied by changing the porphyrin functionalization.

Stereoselective photopolymerization of tetraphenylporphyrin derivatives on Ag(110) at the sub-monolayer level.

We explore a photochemical approach to achieve an ordered polymeric structure at the sub-monolayer level on a metal substrate. In particular, a tetraphenylporphyrin derivative carrying para-amino-phenyl functional groups is used to obtain extended and highly ordered molecular wires on Ag(110). Scanning tunneling microscopy and density functional theory calculations reveal that porphyrin building blocks are joined through azo bridges, mainly as cis isomers. The observed highly stereoselective growth is the result of adsorbate/surface interactions, as indicated by X-ray photoelectron spectroscopy. At variance with previous studies, we tailor the formation of long-range ordered structures by the separate control of the surface molecular diffusion through sample heating, and of the reaction initiation through light absorption. This previously unreported approach shows that the photo-induced covalent stabilization of self-assembled molecular monolayers to obtain highly ordered surface covalent organic frameworks is viable by a careful choice of the precursors and reaction conditions.

Molecular, electronic, and crystal structures of self-assembled hydrothermally synthesized Zn(II)-mercaptonicotinate: a combined spectroscopic and theoretical approach.

A Zn(II) 2-mercaptonicotinate coordination polymer (Zn1), with Zn(II) ions chelated by both sulfur and oxygen in a distorted square pyramidal environment, and a molecular Zn(II) 2-hydroxynicotinate complex (Zn2) were synthesized by the reaction of zinc acetylacetonate with 2-mercaptonicotinic (Zn1) and 2-hydroxynicotinc (Zn2) acid, respectively, under hydrothermal conditions. The crystal structures of Zn1 and Zn2 were determined by single crystal X-ray diffraction measurements. Dispersion-corrected density functional theory (DFT) calculations reproduce very well the experimental structures and show that Zn1 is stable against hydration, whereas Zn2 is stable against dehydration over wide ranges of temperature and pressure, in agreement with thermogravimetric analysis results. The electronic structure of the two compounds is computed with the DFT+U method. The theoretical valence band agrees well with the X-ray photoelectron spectroscopy experiments. Furthermore, the band gap of Zn1 is found to be narrower than that of Zn1 and is characterized by the presence of sulfur lone pairs at the edge of the valence band.

Magnetic properties and vapochromic reversible guest-induced transformation in a bispyrazolato copper(II) polymer: an experimental and dispersion-corrected density functional theory study.

Dispersion-corrected density functional theory (DFT-D) calculations, Electron Spin Resonance spectroscopy (EPR), and variable temperature magnetic moment measurements were used to investigate the structure and the electronic/magnetic properties of bispyrazolato-copper(II) coordination polymer and of its hydration product. The Cu(II) ions are antiferromagnetically coupled through the sigma system of the pyrazolate rings in both compounds. Theoretical electron density maps reveal that water molecules interact simultaneously and to a comparable extent with two Cu(II) centers (through the electronegative O end) and two pyrazolate rings (through the partly positively charged H atoms), which is compatible with the observed internuclear distances. DFT-D calculations indicate that low kinetic barriers are involved in the rearrangement of the host structure.

Role and effective treatment of dispersive forces in materials: Polyethylene and graphite crystals as test cases.

A semiempirical addition of dispersive forces to conventional density functionals (DFT-D) has been implemented into a pseudopotential plane-wave code. Test calculations on the benzene dimer reproduced the results obtained by using localized basis set, provided that the latter are corrected for the basis set superposition error. By applying the DFT-D/plane-wave approach a substantial agreement with experiments is found for the structure and energetics of polyethylene and graphite, two typical solids that are badly described by standard local and semilocal density functionals.

Density functional theory study of the binding capability of tris(pyrazol-1-yl)methane toward Cu(I) and Ag(I) cations.

Density functional theory (DFT) has been used to look into the electronic structure of [M(tpm)]+ molecular ion conformers (M = Cu, Ag; tpm = tris(pyrazol-1-yl)methane) and to study the energetics of their interconversion. Theoretical data pertaining to the free tpm state the intrinsic instability of its kappa3-like conformation, thus indicating that, even though frequently observed, the kappa3-tripodal coordinative mode is unlikely to be directly achieved through the interaction of M(I) with the kappa3-like tpm conformer. It is also found that the energy barrier for the kappa2-[M(tpm)]+ --> kappa3-[M(tpm)]+ conversion is negligible. As far as the bonding scheme is concerned, the tpm --> M(I) donation, both sigma and pi in character, is the main source of the M(I)-tpm bonding, whereas back-donation from completely occupied M(I) d orbitals into tpm-based pi* levels plays a negligible role.